add SDHC support in mmc driver
[u-boot-openmoko/mini2440.git] / include / mpc85xx.h
blob321b24f755182a6fa02cab312ab3d5fd10f345b4
1 /*
2 * Copyright 2004, 2007 Freescale Semiconductor.
3 * Copyright(c) 2003 Motorola Inc.
4 */
6 #ifndef __MPC85xx_H__
7 #define __MPC85xx_H__
9 /* define for common ppc_asm.tmpl */
10 #define EXC_OFF_SYS_RESET 0x100 /* System reset */
11 #define _START_OFFSET 0
13 #if defined(CONFIG_E500)
14 #include <e500.h>
15 #endif
18 * SCCR - System Clock Control Register, 9-8
20 #define SCCR_CLPD 0x00000004 /* CPM Low Power Disable */
21 #define SCCR_DFBRG_MSK 0x00000003 /* Division by BRGCLK Mask */
22 #define SCCR_DFBRG_SHIFT 0
24 #define SCCR_DFBRG00 0x00000000 /* BRGCLK division by 4 */
25 #define SCCR_DFBRG01 0x00000001 /* BRGCLK div by 16 (normal) */
26 #define SCCR_DFBRG10 0x00000002 /* BRGCLK division by 64 */
27 #define SCCR_DFBRG11 0x00000003 /* BRGCLK division by 256 */
30 * Local Bus Controller - memory controller registers
32 #define BRx_V 0x00000001 /* Bank Valid */
33 #define BRx_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */
34 #define BRx_MS_SDRAM 0x00000000 /* SDRAM Machine Select */
35 #define BRx_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */
36 #define BRx_MS_UPMB 0x000000a0 /* U.P.M.B Machine Select */
37 #define BRx_MS_UPMC 0x000000c0 /* U.P.M.C Machine Select */
38 #define BRx_PS_8 0x00000800 /* 8 bit port size */
39 #define BRx_PS_32 0x00001800 /* 32 bit port size */
40 #define BRx_BA_MSK 0xffff8000 /* Base Address Mask */
42 #define ORxG_EAD 0x00000001 /* External addr latch delay */
43 #define ORxG_EHTR 0x00000002 /* Extended hold time on read */
44 #define ORxG_TRLX 0x00000004 /* Timing relaxed */
45 #define ORxG_SETA 0x00000008 /* External address termination */
46 #define ORxG_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */
47 #define ORxG_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */
48 #define ORxG_XACS 0x00000100 /* Extra addr to CS setup */
49 #define ORxG_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later*/
50 #define ORxG_CSNT 0x00000800 /* Chip Select Negation Time */
52 #define ORxU_BI 0x00000100 /* Burst Inhibit */
53 #define ORxU_AM_MSK 0xffff8000 /* Address Mask Mask */
55 #define MxMR_OP_NORM 0x00000000 /* Normal Operation */
56 #define MxMR_DSx_2_CYCL 0x00400000 /* 2 cycle Disable Period */
57 #define MxMR_OP_WARR 0x10000000 /* Write to Array */
58 #define MxMR_BSEL 0x80000000 /* Bus Select */
60 /* helpers to convert values into an OR address mask (GPCM mode) */
61 #define P2SZ_TO_AM(s) ((~((s) - 1)) & 0xffff8000) /* must be pow of 2 */
62 #define MEG_TO_AM(m) P2SZ_TO_AM((m) << 20)
64 #endif /* __MPC85xx_H__ */