include/configs/apollon.h

   1 /*
   2  * (C) Copyright 2005-2007
   3  * Samsung Electronics,
   4  * Kyungmin Park <kyungmin.park@samsung.com>
   5  *
   6  * Configuration settings for the 2420 Samsung Apollon board.
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /*
  31  * High Level Configuration Options
  32  */
  33 #define CONFIG_ARM1136          1 /* This is an arm1136 CPU core */
  34 #define CONFIG_OMAP             1 /* in a TI OMAP core */
  35 #define CONFIG_OMAP2420         1 /* which is in a 2420 */
  36 #define CONFIG_OMAP2420_APOLLON 1
  37 #define CONFIG_APOLLON          1
  38 #define CONFIG_APOLLON_PLUS     1 /* If you have apollon plus 1.x */
  39
  40 /* Clock config to target*/
  41 #define PRCM_CONFIG_I           1
  42 /* #define PRCM_CONFIG_II       1 */
  43
  44 /* Boot method */
  45 /* uncomment if you use NOR boot */
  46 /* #define CFG_NOR_BOOT         1 */
  47
  48 /* uncomment if you use NOR on CS3 */
  49 /* #define CFG_USE_NOR          1 */
  50
  51 #ifdef CFG_NOR_BOOT
  52 #undef CFG_USE_NOR
  53 #define CFG_USE_NOR             1
  54 #endif
  55
  56 #include <asm/arch/omap2420.h>  /* get chip and board defs */
  57
  58 #define V_SCLK  12000000
  59
  60 /* input clock of PLL */
  61 /* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
  62 #define CONFIG_SYS_CLK_FREQ     V_SCLK
  63
  64 #undef  CONFIG_USE_IRQ  /* no support for IRQs */
  65 #define CONFIG_MISC_INIT_R
  66
  67 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs */
  68 #define CONFIG_SETUP_MEMORY_TAGS        1
  69 #define CONFIG_INITRD_TAG       1
  70 #define CONFIG_REVISION_TAG     1
  71
  72 /*
  73  * Size of malloc() pool
  74  */
  75 #define CFG_ENV_SIZE SZ_128K    /* Total Size of Environment Sector */
  76 #define CFG_MALLOC_LEN  (CFG_ENV_SIZE + SZ_128K)
  77 #define CFG_GBL_DATA_SIZE       128     /* bytes reserved for initial data */
  78
  79 /*
  80  * Hardware drivers
  81  */
  82
  83 /*
  84  * SMC91c96 Etherent
  85  */
  86 #define CONFIG_DRIVER_LAN91C96
  87 #define CONFIG_LAN91C96_BASE    (APOLLON_CS1_BASE+0x300)
  88 #define CONFIG_LAN91C96_EXT_PHY
  89
  90 /*
  91  * NS16550 Configuration
  92  */
  93 #define V_NS16550_CLK   (48000000)      /* 48MHz (APLL96/2) */
  94
  95 #define CFG_NS16550
  96 #define CFG_NS16550_SERIAL
  97 #define CFG_NS16550_REG_SIZE    (-4)
  98 #define CFG_NS16550_CLK V_NS16550_CLK   /* 3MHz (1.5MHz*2) */
  99 #define CFG_NS16550_COM1        OMAP2420_UART1
 100
 101 /*
 102  * select serial console configuration
 103  */
 104 #define CONFIG_SERIAL1  1       /* UART1 on H4 */
 105
 106  /*
 107  * I2C configuration
 108  */
 109 #define CONFIG_HARD_I2C
 110 #define CFG_I2C_SPEED   100000
 111 #define CFG_I2C_SLAVE   1
 112 #define CONFIG_DRIVER_OMAP24XX_I2C
 113
 114 /* allow to overwrite serial and ethaddr */
 115 #define CONFIG_ENV_OVERWRITE
 116 #define CONFIG_CONS_INDEX       1
 117 #define CONFIG_BAUDRATE         115200
 118 #define CFG_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 119
 120 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 121 #include        <config_cmd_default.h>
 122
 123 #define CONFIG_CMD_DHCP
 124 #define CONFIG_CMD_DIAG
 125 #define CONFIG_CMD_ONENAND
 126
 127 #undef  CONFIG_CMD_AUTOSCRIPT
 128
 129 #ifndef CFG_USE_NOR
 130 # undef CONFIG_CMD_FLASH
 131 # undef CONFIG_CMD_IMLS
 132 #endif
 133
 134 #define CONFIG_BOOTP_MASK       CONFIG_BOOTP_DEFAULT
 135
 136 #define CONFIG_BOOTDELAY        1
 137
 138 #define CONFIG_NETMASK  255.255.255.0
 139 #define CONFIG_IPADDR   192.168.116.25
 140 #define CONFIG_SERVERIP 192.168.116.1
 141 #define CONFIG_BOOTFILE "uImage"
 142 #define CONFIG_ETHADDR  00:0E:99:00:24:20
 143
 144 #ifdef  CONFIG_APOLLON_PLUS
 145 # define        CONFIG_BOOTARGS "root=/dev/nfs rw mem=64M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
 146 #else
 147 # define        CONFIG_BOOTARGS "root=/dev/nfs rw mem=128M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
 148 #endif
 149
 150 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 151         "Image=tftp 0x80008000 Image; go 0x80008000\0"                  \
 152         "zImage=tftp 0x80180000 zImage; go 0x80180000\0"                \
 153         "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0"             \
 154         "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0"             \
 155         "xloader=tftp 0x80180000 x-load.bin; cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0"        \
 156         "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0"    \
 157         "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0"      \
 158         "norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0"  \
 159         "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0"\
 160         "onesyncboot=run syncmode oneboot\0"                            \
 161         "bootcmd=run uboot\0"
 162
 163 /*
 164  * Miscellaneous configurable options
 165  */
 166 #define V_PROMPT        "Apollon # "
 167
 168 #define CFG_LONGHELP    /* undef to save memory */
 169 #define CFG_PROMPT      V_PROMPT
 170 #define CFG_CBSIZE      256     /* Console I/O Buffer Size */
 171 /* Print Buffer Size */
 172 #define CFG_PBSIZE      (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
 173 #define CFG_MAXARGS     16      /* max number of command args */
 174 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size */
 175
 176 #define CFG_MEMTEST_START       (OMAP2420_SDRC_CS0)     /* memtest works on */
 177 #define CFG_MEMTEST_END         (OMAP2420_SDRC_CS0+SZ_31M)
 178
 179 #undef  CFG_CLKS_IN_HZ  /* everything, incl board info, in Hz */
 180
 181 #define CFG_LOAD_ADDR   (OMAP2420_SDRC_CS0)     /* default load address */
 182
 183 /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
 184  * or by 32KHz clk, or from external sig. This rate is divided by a local
 185  * divisor.
 186  */
 187 #define V_PVT   7       /* use with 12MHz/128 */
 188
 189 #define CFG_TIMERBASE   OMAP2420_GPT2
 190 #define CFG_PVT V_PVT   /* 2^(pvt+1) */
 191 #define CFG_HZ          ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
 192
 193 /*-----------------------------------------------------------------------
 194  * Stack sizes
 195  *
 196  * The stack sizes are set up in start.S using the settings below
 197  */
 198 #define CONFIG_STACKSIZE SZ_128K        /* regular stack */
 199 #ifdef  CONFIG_USE_IRQ
 200 # define        CONFIG_STACKSIZE_IRQ SZ_4K      /* IRQ stack */
 201 # define        CONFIG_STACKSIZE_FIQ SZ_4K      /* FIQ stack */
 202 #endif
 203
 204 /*-----------------------------------------------------------------------
 205  * Physical Memory Map
 206  */
 207 #define CONFIG_NR_DRAM_BANKS    1       /* CS1 may or may not be populated */
 208 #define PHYS_SDRAM_1            OMAP2420_SDRC_CS0
 209 #define PHYS_SDRAM_1_SIZE       SZ_128M
 210 #define PHYS_SDRAM_2            OMAP2420_SDRC_CS1
 211
 212 /*-----------------------------------------------------------------------
 213  * FLASH and environment organization
 214  */
 215 #ifdef  CFG_USE_NOR
 216 /* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */
 217 # define        CFG_FLASH_BASE          0x18000000
 218 # define        CFG_MAX_FLASH_BANKS     1
 219 # define        CFG_MAX_FLASH_SECT      1024
 220 /*-----------------------------------------------------------------------
 221
 222  * CFI FLASH driver setup
 223  */
 224 # define        CFG_FLASH_CFI   1       /* Flash memory is CFI compliant */
 225 # define        CFG_FLASH_CFI_DRIVER    1       /* Use drivers/cfi_flash.c */
 226 /* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */
 227 # define        CFG_FLASH_PROTECTION    1       /* Use h/w sector protection*/
 228
 229 #else   /* !CFG_USE_NOR */
 230 # define        CFG_NO_FLASH    1
 231 #endif  /* CFG_USE_NOR */
 232
 233 /* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */
 234 #define CFG_ONENAND_BASE        0x00000000
 235 #define CFG_ENV_IS_IN_ONENAND   1
 236 #define CFG_ENV_ADDR            0x00020000
 237
 238 #endif /* __CONFIG_H */