include/configs/M5272C3.h

   1 /*
   2  * Configuation settings for the Motorola MC5272C3 board.
   3  *
   4  * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 /*
  26  * board/config.h - configuration options, board specific
  27  */
  28
  29 #ifndef _M5272C3_H
  30 #define _M5272C3_H
  31
  32 /*
  33  * High Level Configuration Options
  34  * (easy to change)
  35  */
  36 #define CONFIG_MCF52x2          /* define processor family */
  37 #define CONFIG_M5272            /* define processor type */
  38
  39 #define CONFIG_MCFTMR
  40
  41 #define CONFIG_MCFUART
  42 #define CFG_UART_PORT           (0)
  43 #define CONFIG_BAUDRATE         19200
  44 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
  45
  46 #undef CONFIG_WATCHDOG
  47 #define CONFIG_WATCHDOG_TIMEOUT 10000   /* timeout in milliseconds */
  48
  49 #undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
  50
  51 /* Configuration for environment
  52  * Environment is embedded in u-boot in the second sector of the flash
  53  */
  54 #ifndef CONFIG_MONITOR_IS_IN_RAM
  55 #define CFG_ENV_OFFSET          0x4000
  56 #define CFG_ENV_SECT_SIZE       0x2000
  57 #define CFG_ENV_IS_IN_FLASH     1
  58 #define CFG_ENV_IS_EMBEDDED     1
  59 #else
  60 #define CFG_ENV_ADDR            0xffe04000
  61 #define CFG_ENV_SECT_SIZE       0x2000
  62 #define CFG_ENV_IS_IN_FLASH     1
  63 #endif
  64
  65 /*
  66  * BOOTP options
  67  */
  68 #define CONFIG_BOOTP_BOOTFILESIZE
  69 #define CONFIG_BOOTP_BOOTPATH
  70 #define CONFIG_BOOTP_GATEWAY
  71 #define CONFIG_BOOTP_HOSTNAME
  72
  73 /*
  74  * Command line configuration.
  75  */
  76 #include <config_cmd_default.h>
  77
  78 #define CONFIG_CMD_MII
  79 #define CONFIG_CMD_NET
  80 #define CONFIG_CMD_PING
  81 #define CONFIG_CMD_MISC
  82 #define CONFIG_CMD_ELF
  83 #define CONFIG_CMD_FLASH
  84 #define CONFIG_CMD_MEMORY
  85
  86 #undef CONFIG_CMD_LOADS
  87 #undef CONFIG_CMD_LOADB
  88
  89 #define CONFIG_BOOTDELAY        5
  90 #define CONFIG_MCFFEC
  91 #ifdef CONFIG_MCFFEC
  92 #       define CONFIG_NET_MULTI         1
  93 #       define CONFIG_MII               1
  94 #       define CFG_DISCOVER_PHY
  95 #       define CFG_RX_ETH_BUFFER        8
  96 #       define CFG_FAULT_ECHO_LINK_DOWN
  97
  98 #       define CFG_FEC0_PINMUX          0
  99 #       define CFG_FEC0_MIIBASE         CFG_FEC0_IOBASE
 100 #       define MCFFEC_TOUT_LOOP         50000
 101 /* If CFG_DISCOVER_PHY is not defined - hardcoded */
 102 #       ifndef CFG_DISCOVER_PHY
 103 #               define FECDUPLEX        FULL
 104 #               define FECSPEED         _100BASET
 105 #       else
 106 #               ifndef CFG_FAULT_ECHO_LINK_DOWN
 107 #                       define CFG_FAULT_ECHO_LINK_DOWN
 108 #               endif
 109 #       endif                   /* CFG_DISCOVER_PHY */
 110 #endif
 111
 112 #ifdef CONFIG_MCFFEC
 113 #       define CONFIG_ETHADDR   00:e0:0c:bc:e5:60
 114 #       define CONFIG_IPADDR    192.162.1.2
 115 #       define CONFIG_NETMASK   255.255.255.0
 116 #       define CONFIG_SERVERIP  192.162.1.1
 117 #       define CONFIG_GATEWAYIP 192.162.1.1
 118 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
 119 #endif                          /* CONFIG_MCFFEC */
 120
 121 #define CONFIG_HOSTNAME         M5272C3
 122 #define CONFIG_EXTRA_ENV_SETTINGS               \
 123         "netdev=eth0\0"                         \
 124         "loadaddr=10000\0"                      \
 125         "u-boot=u-boot.bin\0"                   \
 126         "load=tftp ${loadaddr) ${u-boot}\0"     \
 127         "upd=run load; run prog\0"              \
 128         "prog=prot off ffe00000 ffe3ffff;"      \
 129         "era ffe00000 ffe3ffff;"                \
 130         "cp.b ${loadaddr} ffe00000 ${filesize};"\
 131         "save\0"                                \
 132         ""
 133
 134 #define CFG_PROMPT              "-> "
 135 #define CFG_LONGHELP            /* undef to save memory */
 136
 137 #if defined(CONFIG_CMD_KGDB)
 138 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size      */
 139 #else
 140 #define CFG_CBSIZE              256     /* Console I/O Buffer Size      */
 141 #endif
 142
 143 #define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)      /* Print Buffer Size */
 144 #define CFG_MAXARGS             16      /* max number of command args   */
 145 #define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
 146 #define CFG_LOAD_ADDR           0x20000
 147 #define CFG_MEMTEST_START       0x400
 148 #define CFG_MEMTEST_END         0x380000
 149 #define CFG_HZ                  1000
 150 #define CFG_CLK                 66000000
 151
 152 /*
 153  * Low Level Configuration Settings
 154  * (address mappings, register initial values, etc.)
 155  * You should know what you are doing if you make changes here.
 156  */
 157 #define CFG_MBAR                0x10000000      /* Register Base Addrs */
 158 #define CFG_SCR                 0x0003;
 159 #define CFG_SPR                 0xffff;
 160
 161 /*-----------------------------------------------------------------------
 162  * Definitions for initial stack pointer and data area (in DPRAM)
 163  */
 164 #define CFG_INIT_RAM_ADDR       0x20000000
 165 #define CFG_INIT_RAM_END        0x1000  /* End of used area in internal SRAM    */
 166 #define CFG_GBL_DATA_SIZE       64      /* size in bytes reserved for initial data */
 167 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 168 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 169
 170 /*-----------------------------------------------------------------------
 171  * Start addresses for the final memory configuration
 172  * (Set up by the startup code)
 173  * Please note that CFG_SDRAM_BASE _must_ start at 0
 174  */
 175 #define CFG_SDRAM_BASE          0x00000000
 176 #define CFG_SDRAM_SIZE          4       /* SDRAM size in MB */
 177 #define CFG_FLASH_BASE          0xffe00000
 178
 179 #ifdef  CONFIG_MONITOR_IS_IN_RAM
 180 #define CFG_MONITOR_BASE        0x20000
 181 #else
 182 #define CFG_MONITOR_BASE        (CFG_FLASH_BASE + 0x400)
 183 #endif
 184
 185 #define CFG_MONITOR_LEN         0x20000
 186 #define CFG_MALLOC_LEN          (256 << 10)
 187 #define CFG_BOOTPARAMS_LEN      64*1024
 188
 189 /*
 190  * For booting Linux, the board info and command line data
 191  * have to be in the first 8 MB of memory, since this is
 192  * the maximum mapped by the Linux kernel during initialization ??
 193  */
 194 #define CFG_BOOTMAPSZ           (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
 195
 196 /*-----------------------------------------------------------------------
 197  * FLASH organization
 198  */
 199 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
 200 #define CFG_MAX_FLASH_SECT      11      /* max number of sectors on one chip    */
 201 #define CFG_FLASH_ERASE_TOUT    1000
 202
 203 /*-----------------------------------------------------------------------
 204  * Cache Configuration
 205  */
 206 #define CFG_CACHELINE_SIZE      16
 207
 208 /*-----------------------------------------------------------------------
 209  * Memory bank definitions
 210  */
 211 #define CFG_BR0_PRELIM          0xFFE00201
 212 #define CFG_OR0_PRELIM          0xFFE00014
 213 #define CFG_BR1_PRELIM          0
 214 #define CFG_OR1_PRELIM          0
 215 #define CFG_BR2_PRELIM          0x30000001
 216 #define CFG_OR2_PRELIM          0xFFF80000
 217 #define CFG_BR3_PRELIM          0
 218 #define CFG_OR3_PRELIM          0
 219 #define CFG_BR4_PRELIM          0
 220 #define CFG_OR4_PRELIM          0
 221 #define CFG_BR5_PRELIM          0
 222 #define CFG_OR5_PRELIM          0
 223 #define CFG_BR6_PRELIM          0
 224 #define CFG_OR6_PRELIM          0
 225 #define CFG_BR7_PRELIM          0x00000701
 226 #define CFG_OR7_PRELIM          0xFFC0007C
 227
 228 /*-----------------------------------------------------------------------
 229  * Port configuration
 230  */
 231 #define CFG_PACNT               0x00000000
 232 #define CFG_PADDR               0x0000
 233 #define CFG_PADAT               0x0000
 234 #define CFG_PBCNT               0x55554155      /* Ethernet/UART configuration */
 235 #define CFG_PBDDR               0x0000
 236 #define CFG_PBDAT               0x0000
 237 #define CFG_PDCNT               0x00000000
 238 #endif                          /* _M5272C3_H */