include/configs/EB+MCF-EV123.h

   1 /*
   2  * Configuation settings for the BuS EB+MCF-EV123 boards.
   3  *
   4  * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 #ifndef _CONFIG_EB_MCF_EV123_H_
  26 #define _CONFIG_EB_MCF_EV123_H_
  27
  28 #define  CONFIG_EB_MCF_EV123
  29
  30 #undef CFG_HALT_BEFOR_RAM_JUMP
  31
  32 /*
  33  * High Level Configuration Options (easy to change)
  34  */
  35
  36 #define CONFIG_MCF52x2                  /* define processor family */
  37 #define CONFIG_M5282                    /* define processor type */
  38
  39 #define CONFIG_MISC_INIT_R
  40
  41 #define CONFIG_MCFUART
  42 #define CFG_UART_PORT           (0)
  43 #define CONFIG_BAUDRATE 9600
  44 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
  45
  46 #undef  CONFIG_MONITOR_IS_IN_RAM        /* define if monitor is started from a pre-loader */
  47
  48 #define CONFIG_BOOTCOMMAND "printenv"
  49
  50 /* Configuration for environment
  51  * Environment is embedded in u-boot in the second sector of the flash
  52  */
  53 #ifndef CONFIG_MONITOR_IS_IN_RAM
  54 #define CFG_ENV_ADDR            0xF003C000      /* End of 256K */
  55 #define CFG_ENV_SECT_SIZE       0x4000
  56 #define CFG_ENV_IS_IN_FLASH     1
  57 /*
  58 #define CFG_ENV_IS_EMBEDDED     1
  59 #define CFG_ENV_ADDR_REDUND             0xF0018000
  60 #define CFG_ENV_SECT_SIZE_REDUND        0x4000
  61 */
  62 #else
  63 #define CFG_ENV_ADDR            0xFFE04000
  64 #define CFG_ENV_SECT_SIZE       0x2000
  65 #define CFG_ENV_IS_IN_FLASH     1
  66 #endif
  67
  68
  69 /*
  70  * BOOTP options
  71  */
  72 #define CONFIG_BOOTP_BOOTFILESIZE
  73 #define CONFIG_BOOTP_BOOTPATH
  74 #define CONFIG_BOOTP_GATEWAY
  75 #define CONFIG_BOOTP_HOSTNAME
  76
  77
  78 /*
  79  * Command line configuration.
  80  */
  81 #include <config_cmd_default.h>
  82
  83 #undef CONFIG_CMD_LOADB
  84 #define CONFIG_CMD_MII
  85 #define CONFIG_CMD_NET
  86
  87 #define CONFIG_MCFFEC
  88 #ifdef CONFIG_MCFFEC
  89 #       define CONFIG_NET_MULTI         1
  90 #       define CONFIG_MII               1
  91 #       define CFG_DISCOVER_PHY
  92 #       define CFG_RX_ETH_BUFFER        8
  93 #       define CFG_FAULT_ECHO_LINK_DOWN
  94
  95 #       define CFG_FEC0_PINMUX          0
  96 #       define CFG_FEC0_MIIBASE         CFG_FEC0_IOBASE
  97 #       define MCFFEC_TOUT_LOOP         50000
  98 /* If CFG_DISCOVER_PHY is not defined - hardcoded */
  99 #       ifndef CFG_DISCOVER_PHY
 100 #               define FECDUPLEX        FULL
 101 #               define FECSPEED         _100BASET
 102 #       else
 103 #               ifndef CFG_FAULT_ECHO_LINK_DOWN
 104 #                       define CFG_FAULT_ECHO_LINK_DOWN
 105 #               endif
 106 #       endif                   /* CFG_DISCOVER_PHY */
 107 #endif
 108
 109 #ifdef CONFIG_MCFFEC
 110 #       define CONFIG_ETHADDR   00:CF:52:82:EB:01
 111 #       define CONFIG_IPADDR    192.162.1.2
 112 #       define CONFIG_NETMASK   255.255.255.0
 113 #       define CONFIG_SERVERIP  192.162.1.1
 114 #       define CONFIG_GATEWAYIP 192.162.1.1
 115 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
 116 #endif                          /* CONFIG_MCFFEC */
 117
 118 #define CONFIG_BOOTDELAY        5
 119 #define CFG_PROMPT              "\nEV123 U-Boot> "
 120 #define CFG_LONGHELP                            /* undef to save memory         */
 121
 122 #if defined(CONFIG_CMD_KGDB)
 123 #define CFG_CBSIZE              1024            /* Console I/O Buffer Size      */
 124 #else
 125 #define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
 126 #endif
 127 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 128 #define CFG_MAXARGS             16              /* max number of command args   */
 129 #define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
 130
 131 #define CFG_LOAD_ADDR           0x20000
 132
 133 #define CFG_MEMTEST_START       0x100000
 134 #define CFG_MEMTEST_END         0x400000
 135 /*#define CFG_DRAM_TEST         1 */
 136 #undef CFG_DRAM_TEST
 137
 138 /* Clock and PLL Configuration */
 139 #define CFG_HZ                  10000000
 140 #define CFG_CLK                 58982400       /* 9,8304MHz * 6 */
 141
 142 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
 143
 144 #define CFG_MFD                 0x01    /* PLL Multiplication Factor Devider */
 145 #define CFG_RFD                 0x00    /* PLL Reduce Frecuency Devider */
 146
 147 /*
 148  * Low Level Configuration Settings
 149  * (address mappings, register initial values, etc.)
 150  * You should know what you are doing if you make changes here.
 151  */
 152 #define CFG_MBAR                0x40000000
 153
 154 /*-----------------------------------------------------------------------
 155  * Definitions for initial stack pointer and data area (in DPRAM)
 156  */
 157 #define CFG_INIT_RAM_ADDR       0x20000000
 158 #define CFG_INIT_RAM_END        0x10000         /* End of used area in internal SRAM    */
 159 #define CFG_GBL_DATA_SIZE       64              /* size in bytes reserved for initial data */
 160 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 161 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 162
 163 /*-----------------------------------------------------------------------
 164  * Start addresses for the final memory configuration
 165  * (Set up by the startup code)
 166  * Please note that CFG_SDRAM_BASE _must_ start at 0
 167  */
 168 #define CFG_SDRAM_BASE1         0x00000000
 169 #define CFG_SDRAM_SIZE1         16              /* SDRAM size in MB */
 170
 171 /*
 172 #define CFG_SDRAM_BASE0         CFG_SDRAM_BASE1+CFG_SDRAM_SIZE1*1024*1024
 173 #define CFG_SDRAM_SIZE0         16      */      /* SDRAM size in MB */
 174
 175 #define CFG_SDRAM_BASE          CFG_SDRAM_BASE1
 176 #define CFG_SDRAM_SIZE          CFG_SDRAM_SIZE1
 177
 178 #define CFG_FLASH_BASE          0xFFE00000
 179 #define CFG_INT_FLASH_BASE      0xF0000000
 180 #define CFG_INT_FLASH_ENABLE    0x21
 181
 182 /* If M5282 port is fully implemented the monitor base will be behind
 183  * the vector table. */
 184 #if (TEXT_BASE !=  CFG_INT_FLASH_BASE)
 185 #define CFG_MONITOR_BASE        (TEXT_BASE + 0x400)
 186 #else
 187 #define CFG_MONITOR_BASE        (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
 188 #endif
 189
 190 #define CFG_MONITOR_LEN         0x20000
 191 #define CFG_MALLOC_LEN          (256 << 10)
 192 #define CFG_BOOTPARAMS_LEN      64*1024
 193
 194 /*
 195  * For booting Linux, the board info and command line data
 196  * have to be in the first 8 MB of memory, since this is
 197  * the maximum mapped by the Linux kernel during initialization ??
 198  */
 199 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 200
 201 /*-----------------------------------------------------------------------
 202  * FLASH organization
 203  */
 204 #define CFG_MAX_FLASH_SECT      35
 205 #define CFG_MAX_FLASH_BANKS     2
 206 #define CFG_FLASH_ERASE_TOUT    10000000
 207 #define CFG_FLASH_PROTECTION
 208
 209 /*-----------------------------------------------------------------------
 210  * Cache Configuration
 211  */
 212 #define CFG_CACHELINE_SIZE      16
 213
 214 /*-----------------------------------------------------------------------
 215  * Memory bank definitions
 216  */
 217
 218 #define CFG_CS0_BASE            CFG_FLASH_BASE
 219 #define CFG_CS0_SIZE            2*1024*1024
 220 #define CFG_CS0_WIDTH           16
 221 #define CFG_CS0_RO              0
 222 #define CFG_CS0_WS              6
 223
 224 #define CFG_CS3_BASE            0xE0000000
 225 #define CFG_CS3_SIZE            1*1024*1024
 226 #define CFG_CS3_WIDTH           16
 227 #define CFG_CS3_RO              0
 228 #define CFG_CS3_WS              6
 229
 230 /*-----------------------------------------------------------------------
 231  * Port configuration
 232  */
 233 #define CFG_PACNT               0x0000000       /* Port A D[31:24] */
 234 #define CFG_PADDR               0x0000000
 235 #define CFG_PADAT               0x0000000
 236
 237 #define CFG_PBCNT               0x0000000       /* Port B D[23:16] */
 238 #define CFG_PBDDR               0x0000000
 239 #define CFG_PBDAT               0x0000000
 240
 241 #define CFG_PCCNT               0x0000000       /* Port C D[15:08] */
 242 #define CFG_PCDDR               0x0000000
 243 #define CFG_PCDAT               0x0000000
 244
 245 #define CFG_PDCNT               0x0000000       /* Port D D[07:00] */
 246 #define CFG_PCDDR               0x0000000
 247 #define CFG_PCDAT               0x0000000
 248
 249 #define CFG_PEHLPAR             0xC0
 250 #define CFG_PUAPAR              0x0F            /* UA0..UA3 = Uart 0 +1 */
 251 #define CFG_DDRUA               0x05
 252 #define CFG_PJPAR               0xFF;
 253
 254 /*-----------------------------------------------------------------------
 255  * CCM configuration
 256  */
 257
 258 #define CFG_CCM_SIZ             0
 259
 260 /*---------------------------------------------------------------------*/
 261 #endif  /* _CONFIG_M5282EVB_H */
 262 /*---------------------------------------------------------------------*/