include/configs/CPU86.h

   1 /*
   2  * (C) Copyright 2001-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_MPC8260          1       /* This is an MPC8260 CPU               */
  37 #define CONFIG_CPU86            1       /* ...on a CPU86 board  */
  38 #define CONFIG_CPM2             1       /* Has a CPM2 */
  39
  40 /*
  41  * select serial console configuration
  42  *
  43  * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
  44  * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
  45  * for SCC).
  46  *
  47  * if CONFIG_CONS_NONE is defined, then the serial console routines must
  48  * defined elsewhere (for example, on the cogent platform, there are serial
  49  * ports on the motherboard which are used for the serial console - see
  50  * cogent/cma101/serial.[ch]).
  51  */
  52 #undef  CONFIG_CONS_ON_SMC              /* define if console on SMC */
  53 #define CONFIG_CONS_ON_SCC              /* define if console on SCC */
  54 #undef  CONFIG_CONS_NONE                /* define if console on something else*/
  55 #define CONFIG_CONS_INDEX       1       /* which serial channel for console */
  56
  57 #if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC)
  58 #define CONFIG_BAUDRATE         230400
  59 #else
  60 #define CONFIG_BAUDRATE         9600
  61 #endif
  62
  63 /*
  64  * select ethernet configuration
  65  *
  66  * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
  67  * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
  68  * for FCC)
  69  *
  70  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
  71  * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  72  */
  73 #undef  CONFIG_ETHER_ON_SCC             /* define if ether on SCC       */
  74 #define CONFIG_ETHER_ON_FCC             /* define if ether on FCC       */
  75 #undef  CONFIG_ETHER_NONE               /* define if ether on something else */
  76 #define CONFIG_ETHER_INDEX      1       /* which SCC/FCC channel for ethernet */
  77
  78 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
  79
  80 /*
  81  * - Rx-CLK is CLK11
  82  * - Tx-CLK is CLK12
  83  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  84  * - Enable Full Duplex in FSMR
  85  */
  86 # define CFG_CMXFCR_MASK        (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
  87 # define CFG_CMXFCR_VALUE       (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
  88 # define CFG_CPMFCR_RAMTYPE     0
  89 # define CFG_FCC_PSMR           (FCC_PSMR_FDE|FCC_PSMR_LPB)
  90
  91 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
  92
  93 /*
  94  * - Rx-CLK is CLK13
  95  * - Tx-CLK is CLK14
  96  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  97  * - Enable Full Duplex in FSMR
  98  */
  99 # define CFG_CMXFCR_MASK        (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
 100 # define CFG_CMXFCR_VALUE       (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 101 # define CFG_CPMFCR_RAMTYPE     0
 102 # define CFG_FCC_PSMR           (FCC_PSMR_FDE|FCC_PSMR_LPB)
 103
 104 #endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
 105
 106 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
 107 #define CONFIG_8260_CLKIN       64000000        /* in Hz */
 108
 109 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
 110
 111 #define CONFIG_PREBOOT                                                          \
 112         "echo; "                                                                \
 113         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS; "   \
 114         "echo"
 115
 116 #undef  CONFIG_BOOTARGS
 117 #define CONFIG_BOOTCOMMAND                                                      \
 118         "bootp; "                                                               \
 119         "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
 120         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
 121         "bootm"
 122
 123 /*-----------------------------------------------------------------------
 124  * I2C/EEPROM/RTC configuration
 125  */
 126 #define CONFIG_SOFT_I2C                 /* Software I2C support enabled */
 127
 128 # define CFG_I2C_SPEED          50000
 129 # define CFG_I2C_SLAVE          0xFE
 130 /*
 131  * Software (bit-bang) I2C driver configuration
 132  */
 133 #define I2C_PORT        3               /* Port A=0, B=1, C=2, D=3 */
 134 #define I2C_ACTIVE      (iop->pdir |=  0x00010000)
 135 #define I2C_TRISTATE    (iop->pdir &= ~0x00010000)
 136 #define I2C_READ        ((iop->pdat & 0x00010000) != 0)
 137 #define I2C_SDA(bit)    if(bit) iop->pdat |=  0x00010000; \
 138                         else    iop->pdat &= ~0x00010000
 139 #define I2C_SCL(bit)    if(bit) iop->pdat |=  0x00020000; \
 140                         else    iop->pdat &= ~0x00020000
 141 #define I2C_DELAY       udelay(5)       /* 1/4 I2C clock duration */
 142
 143 #define CONFIG_RTC_PCF8563
 144 #define CFG_I2C_RTC_ADDR        0x51
 145
 146 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
 147
 148 /*-----------------------------------------------------------------------
 149  * Disk-On-Chip configuration
 150  */
 151
 152 #define CFG_MAX_DOC_DEVICE      1       /* Max number of DOC devices    */
 153
 154 #define CFG_DOC_SUPPORT_2000
 155 #define CFG_DOC_SUPPORT_MILLENNIUM
 156
 157 /*-----------------------------------------------------------------------
 158  * Miscellaneous configuration options
 159  */
 160
 161 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 162 #undef  CFG_LOADS_BAUD_CHANGE           /* don't allow baudrate change  */
 163
 164 /*
 165  * BOOTP options
 166  */
 167 #define CONFIG_BOOTP_SUBNETMASK
 168 #define CONFIG_BOOTP_GATEWAY
 169 #define CONFIG_BOOTP_HOSTNAME
 170 #define CONFIG_BOOTP_BOOTPATH
 171 #define CONFIG_BOOTP_BOOTFILESIZE
 172
 173
 174 /*
 175  * Command line configuration.
 176  */
 177 #include <config_cmd_default.h>
 178
 179 #define CONFIG_CMD_BEDBUG
 180 #define CONFIG_CMD_DATE
 181 #define CONFIG_CMD_DHCP
 182 #define CONFIG_CMD_DOC
 183 #define CONFIG_CMD_EEPROM
 184 #define CONFIG_CMD_I2C
 185 #define CONFIG_CMD_NFS
 186 #define CONFIG_CMD_SNTP
 187
 188
 189 /*
 190  * Miscellaneous configurable options
 191  */
 192 #define CFG_LONGHELP                    /* undef to save memory         */
 193 #define CFG_PROMPT      "=> "           /* Monitor Command Prompt       */
 194 #if defined(CONFIG_CMD_KGDB)
 195 #define CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 196 #else
 197 #define CFG_CBSIZE      256             /* Console I/O Buffer Size      */
 198 #endif
 199 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 200 #define CFG_MAXARGS     16              /* max number of command args   */
 201 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 202
 203 #define CFG_MEMTEST_START       0x0400000       /* memtest works on     */
 204 #define CFG_MEMTEST_END 0x0C00000       /* 4 ... 12 MB in DRAM  */
 205
 206 #define CFG_LOAD_ADDR   0x100000        /* default load address */
 207
 208 #define CFG_HZ          1000            /* decrementer freq: 1 ms ticks */
 209
 210 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 211
 212 #define CFG_RESET_ADDRESS 0xFFF00100    /* "bad" address                */
 213
 214 /*
 215  * For booting Linux, the board info and command line data
 216  * have to be in the first 8 MB of memory, since this is
 217  * the maximum mapped by the Linux kernel during initialization.
 218  */
 219 #define CFG_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
 220
 221 /*-----------------------------------------------------------------------
 222  * Flash configuration
 223  */
 224
 225 #define CFG_BOOTROM_BASE        0xFF800000
 226 #define CFG_BOOTROM_SIZE        0x00080000
 227 #define CFG_FLASH_BASE          0xFF000000
 228 #define CFG_FLASH_SIZE          0x00800000
 229
 230 /*-----------------------------------------------------------------------
 231  * FLASH organization
 232  */
 233 #define CFG_MAX_FLASH_BANKS     2       /* max num of memory banks      */
 234 #define CFG_MAX_FLASH_SECT      128     /* max num of sects on one chip */
 235
 236 #define CFG_FLASH_ERASE_TOUT    240000  /* Flash Erase Timeout (in ms)  */
 237 #define CFG_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (in ms)  */
 238
 239 /*-----------------------------------------------------------------------
 240  * Other areas to be mapped
 241  */
 242
 243 /* CS3: Dual ported SRAM */
 244 #define CFG_DPSRAM_BASE         0x40000000
 245 #define CFG_DPSRAM_SIZE         0x00020000
 246
 247 /* CS4: DiskOnChip */
 248 #define CFG_DOC_BASE            0xF4000000
 249 #define CFG_DOC_SIZE            0x00100000
 250
 251 /* CS5: FDC37C78 controller */
 252 #define CFG_FDC37C78_BASE       0xF1000000
 253 #define CFG_FDC37C78_SIZE       0x00100000
 254
 255 /* CS6: Board configuration registers */
 256 #define CFG_BCRS_BASE           0xF2000000
 257 #define CFG_BCRS_SIZE           0x00010000
 258
 259 /* CS7: VME Extended Access Range */
 260 #define CFG_VMEEAR_BASE         0x80000000
 261 #define CFG_VMEEAR_SIZE         0x01000000
 262
 263 /* CS8: VME Standard Access Range */
 264 #define CFG_VMESAR_BASE         0xFE000000
 265 #define CFG_VMESAR_SIZE         0x01000000
 266
 267 /* CS9: VME Short I/O Access Range */
 268 #define CFG_VMESIOAR_BASE       0xFD000000
 269 #define CFG_VMESIOAR_SIZE       0x01000000
 270
 271 /*-----------------------------------------------------------------------
 272  * Hard Reset Configuration Words
 273  *
 274  * if you change bits in the HRCW, you must also change the CFG_*
 275  * defines for the various registers affected by the HRCW e.g. changing
 276  * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
 277  */
 278 #if defined(CONFIG_BOOT_ROM)
 279 #define CFG_HRCW_MASTER         (HRCW_CIP | HRCW_ISB100 | HRCW_BMS | \
 280                                  HRCW_BPS01 | HRCW_CS10PC01)
 281 #else
 282 #define CFG_HRCW_MASTER         (HRCW_CIP | HRCW_ISB100 | HRCW_BMS | HRCW_CS10PC01)
 283 #endif
 284
 285 /* no slaves so just fill with zeros */
 286 #define CFG_HRCW_SLAVE1         0
 287 #define CFG_HRCW_SLAVE2         0
 288 #define CFG_HRCW_SLAVE3         0
 289 #define CFG_HRCW_SLAVE4         0
 290 #define CFG_HRCW_SLAVE5         0
 291 #define CFG_HRCW_SLAVE6         0
 292 #define CFG_HRCW_SLAVE7         0
 293
 294 /*-----------------------------------------------------------------------
 295  * Internal Memory Mapped Register
 296  */
 297 #define CFG_IMMR                0xF0000000
 298
 299 /*-----------------------------------------------------------------------
 300  * Definitions for initial stack pointer and data area (in DPRAM)
 301  */
 302 #define CFG_INIT_RAM_ADDR       CFG_IMMR
 303 #define CFG_INIT_RAM_END        0x4000  /* End of used area in DPRAM    */
 304 #define CFG_GBL_DATA_SIZE       128 /* size in bytes reserved for initial data*/
 305 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 306 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 307
 308 /*-----------------------------------------------------------------------
 309  * Start addresses for the final memory configuration
 310  * (Set up by the startup code)
 311  * Please note that CFG_SDRAM_BASE _must_ start at 0
 312  *
 313  * 60x SDRAM is mapped at CFG_SDRAM_BASE.
 314  */
 315 #define CFG_SDRAM_BASE          0x00000000
 316 #define CFG_SDRAM_MAX_SIZE      0x08000000      /* max. 128 MB          */
 317 #define CFG_MONITOR_BASE        TEXT_BASE
 318 #define CFG_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
 319 #define CFG_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()*/
 320
 321 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 322 # define CFG_RAMBOOT
 323 #endif
 324
 325 #if 0
 326 /* environment is in Flash */
 327 #define CFG_ENV_IS_IN_FLASH     1
 328 #ifdef CONFIG_BOOT_ROM
 329 # define CFG_ENV_ADDR           (CFG_FLASH_BASE+0x70000)
 330 # define CFG_ENV_SIZE           0x10000
 331 # define CFG_ENV_SECT_SIZE      0x10000
 332 #endif
 333 #else
 334 /* environment is in EEPROM */
 335 #define CFG_ENV_IS_IN_EEPROM    1
 336 #define CFG_I2C_EEPROM_ADDR     0x58    /* EEPROM X24C16                */
 337 #define CFG_I2C_EEPROM_ADDR_LEN 1
 338 /* mask of address bits that overflow into the "EEPROM chip address"    */
 339 #define CFG_I2C_EEPROM_ADDR_OVERFLOW    0x07
 340 #define CFG_EEPROM_PAGE_WRITE_BITS      4
 341 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS  10      /* and takes up to 10 msec */
 342 #define CFG_ENV_OFFSET          512
 343 #define CFG_ENV_SIZE            (2048 - 512)
 344 #endif
 345
 346 /*
 347  * Internal Definitions
 348  *
 349  * Boot Flags
 350  */
 351 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH*/
 352 #define BOOTFLAG_WARM           0x02    /* Software reboot                 */
 353
 354
 355 /*-----------------------------------------------------------------------
 356  * Cache Configuration
 357  */
 358 #define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
 359 #if defined(CONFIG_CMD_KGDB)
 360 # define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 361 #endif
 362
 363 /*-----------------------------------------------------------------------
 364  * HIDx - Hardware Implementation-dependent Registers                    2-11
 365  *-----------------------------------------------------------------------
 366  * HID0 also contains cache control - initially enable both caches and
 367  * invalidate contents, then the final state leaves only the instruction
 368  * cache enabled. Note that Power-On and Hard reset invalidate the caches,
 369  * but Soft reset does not.
 370  *
 371  * HID1 has only read-only information - nothing to set.
 372  */
 373 #define CFG_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|\
 374                          HID0_DCI|HID0_IFEM|HID0_ABE)
 375 #define CFG_HID0_FINAL  (HID0_IFEM|HID0_ABE)
 376 #define CFG_HID2        0
 377
 378 /*-----------------------------------------------------------------------
 379  * RMR - Reset Mode Register                                     5-5
 380  *-----------------------------------------------------------------------
 381  * turn on Checkstop Reset Enable
 382  */
 383 #define CFG_RMR         RMR_CSRE
 384
 385 /*-----------------------------------------------------------------------
 386  * BCR - Bus Configuration                                       4-25
 387  *-----------------------------------------------------------------------
 388  */
 389 #define BCR_APD01       0x10000000
 390 #define CFG_BCR         (BCR_APD01|BCR_ETM|BCR_LETM)    /* 8260 mode */
 391
 392 /*-----------------------------------------------------------------------
 393  * SIUMCR - SIU Module Configuration                             4-31
 394  *-----------------------------------------------------------------------
 395  */
 396 #define CFG_SIUMCR      (SIUMCR_BBD|SIUMCR_DPPC00|SIUMCR_APPC10|\
 397                          SIUMCR_CS10PC01|SIUMCR_BCTLC10)
 398
 399 /*-----------------------------------------------------------------------
 400  * SYPCR - System Protection Control                             4-35
 401  * SYPCR can only be written once after reset!
 402  *-----------------------------------------------------------------------
 403  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
 404  */
 405 #if defined(CONFIG_WATCHDOG)
 406 #define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 407                          SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 408 #else
 409 #define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 410                          SYPCR_SWRI|SYPCR_SWP)
 411 #endif /* CONFIG_WATCHDOG */
 412
 413 /*-----------------------------------------------------------------------
 414  * TMCNTSC - Time Counter Status and Control                     4-40
 415  *-----------------------------------------------------------------------
 416  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
 417  * and enable Time Counter
 418  */
 419 #define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 420
 421 /*-----------------------------------------------------------------------
 422  * PISCR - Periodic Interrupt Status and Control                 4-42
 423  *-----------------------------------------------------------------------
 424  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
 425  * Periodic timer
 426  */
 427 #define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
 428
 429 /*-----------------------------------------------------------------------
 430  * SCCR - System Clock Control                                   9-8
 431  *-----------------------------------------------------------------------
 432  * Ensure DFBRG is Divide by 16
 433  */
 434 #define CFG_SCCR        SCCR_DFBRG01
 435
 436 /*-----------------------------------------------------------------------
 437  * RCCR - RISC Controller Configuration                         13-7
 438  *-----------------------------------------------------------------------
 439  */
 440 #define CFG_RCCR        0
 441
 442 #define CFG_MIN_AM_MASK 0xC0000000
 443 /*-----------------------------------------------------------------------
 444  * MPTPR - Memory Refresh Timer Prescaler Register              10-18
 445  *-----------------------------------------------------------------------
 446  */
 447 #define CFG_MPTPR       0x1F00
 448
 449 /*-----------------------------------------------------------------------
 450  * PSRT - Refresh Timer Register                                10-16
 451  *-----------------------------------------------------------------------
 452  */
 453 #define CFG_PSRT        0x0f
 454
 455 /*-----------------------------------------------------------------------
 456  * PSRT - SDRAM Mode Register                                   10-10
 457  *-----------------------------------------------------------------------
 458  */
 459
 460         /* SDRAM initialization values for 8-column chips
 461          */
 462 #define CFG_OR2_8COL    (CFG_MIN_AM_MASK                |\
 463                          ORxS_BPD_4                     |\
 464                          ORxS_ROWST_PBI0_A9             |\
 465                          ORxS_NUMR_12)
 466
 467 #define CFG_PSDMR_8COL  (PSDMR_SDAM_A13_IS_A5           |\
 468                          PSDMR_BSMA_A14_A16             |\
 469                          PSDMR_SDA10_PBI0_A10           |\
 470                          PSDMR_RFRC_7_CLK               |\
 471                          PSDMR_PRETOACT_2W              |\
 472                          PSDMR_ACTTORW_1W               |\
 473                          PSDMR_LDOTOPRE_1C              |\
 474                          PSDMR_WRC_1C                   |\
 475                          PSDMR_CL_2)
 476
 477         /* SDRAM initialization values for 9-column chips
 478          */
 479 #define CFG_OR2_9COL    (CFG_MIN_AM_MASK                |\
 480                          ORxS_BPD_4                     |\
 481                          ORxS_ROWST_PBI0_A7             |\
 482                          ORxS_NUMR_13)
 483
 484 #define CFG_PSDMR_9COL  (PSDMR_SDAM_A14_IS_A5           |\
 485                          PSDMR_BSMA_A13_A15             |\
 486                          PSDMR_SDA10_PBI0_A9            |\
 487                          PSDMR_RFRC_7_CLK               |\
 488                          PSDMR_PRETOACT_2W              |\
 489                          PSDMR_ACTTORW_1W               |\
 490                          PSDMR_LDOTOPRE_1C              |\
 491                          PSDMR_WRC_1C                   |\
 492                          PSDMR_CL_2)
 493
 494 /*
 495  * Init Memory Controller:
 496  *
 497  * Bank Bus     Machine PortSz  Device
 498  * ---- ---     ------- ------  ------
 499  *  0   60x     GPCM    8  bit  Boot ROM
 500  *  1   60x     GPCM    64 bit  FLASH
 501  *  2   60x     SDRAM   64 bit  SDRAM
 502  *
 503  */
 504
 505 #define CFG_MRS_OFFS    0x00000000
 506
 507 #ifdef CONFIG_BOOT_ROM
 508 /* Bank 0 - Boot ROM
 509  */
 510 #define CFG_BR0_PRELIM  ((CFG_BOOTROM_BASE & BRx_BA_MSK)|\
 511                          BRx_PS_8                       |\
 512                          BRx_MS_GPCM_P                  |\
 513                          BRx_V)
 514
 515 #define CFG_OR0_PRELIM  (P2SZ_TO_AM(CFG_BOOTROM_SIZE)   |\
 516                          ORxG_CSNT                      |\
 517                          ORxG_ACS_DIV1                  |\
 518                          ORxG_SCY_3_CLK                 |\
 519                          ORxU_EHTR_8IDLE)
 520
 521 /* Bank 1 - FLASH
 522  */
 523 #define CFG_BR1_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)  |\
 524                          BRx_PS_64                      |\
 525                          BRx_MS_GPCM_P                  |\
 526                          BRx_V)
 527
 528 #define CFG_OR1_PRELIM  (P2SZ_TO_AM(CFG_FLASH_SIZE)     |\
 529                          ORxG_CSNT                      |\
 530                          ORxG_ACS_DIV1                  |\
 531                          ORxG_SCY_3_CLK                 |\
 532                          ORxU_EHTR_8IDLE)
 533
 534 #else /* CONFIG_BOOT_ROM */
 535 /* Bank 0 - FLASH
 536  */
 537 #define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)  |\
 538                          BRx_PS_64                      |\
 539                          BRx_MS_GPCM_P                  |\
 540                          BRx_V)
 541
 542 #define CFG_OR0_PRELIM  (P2SZ_TO_AM(CFG_FLASH_SIZE)     |\
 543                          ORxG_CSNT                      |\
 544                          ORxG_ACS_DIV1                  |\
 545                          ORxG_SCY_3_CLK                 |\
 546                          ORxU_EHTR_8IDLE)
 547
 548 /* Bank 1 - Boot ROM
 549  */
 550 #define CFG_BR1_PRELIM  ((CFG_BOOTROM_BASE & BRx_BA_MSK)|\
 551                          BRx_PS_8                       |\
 552                          BRx_MS_GPCM_P                  |\
 553                          BRx_V)
 554
 555 #define CFG_OR1_PRELIM  (P2SZ_TO_AM(CFG_BOOTROM_SIZE)   |\
 556                          ORxG_CSNT                      |\
 557                          ORxG_ACS_DIV1                  |\
 558                          ORxG_SCY_3_CLK                 |\
 559                          ORxU_EHTR_8IDLE)
 560
 561 #endif /* CONFIG_BOOT_ROM */
 562
 563
 564 /* Bank 2 - 60x bus SDRAM
 565  */
 566 #ifndef CFG_RAMBOOT
 567 #define CFG_BR2_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
 568                          BRx_PS_64                      |\
 569                          BRx_MS_SDRAM_P                 |\
 570                          BRx_V)
 571
 572 #define CFG_OR2_PRELIM   CFG_OR2_9COL
 573
 574 #define CFG_PSDMR        CFG_PSDMR_9COL
 575 #endif /* CFG_RAMBOOT */
 576
 577 /* Bank 3 - Dual Ported SRAM
 578  */
 579 #define CFG_BR3_PRELIM  ((CFG_DPSRAM_BASE & BRx_BA_MSK) |\
 580                          BRx_PS_16                      |\
 581                          BRx_MS_GPCM_P                  |\
 582                          BRx_V)
 583
 584 #define CFG_OR3_PRELIM  (P2SZ_TO_AM(CFG_DPSRAM_SIZE)    |\
 585                          ORxG_CSNT                      |\
 586                          ORxG_ACS_DIV1                  |\
 587                          ORxG_SCY_5_CLK                 |\
 588                          ORxG_SETA)
 589
 590 /* Bank 4 - DiskOnChip
 591  */
 592 #define CFG_BR4_PRELIM  ((CFG_DOC_BASE & BRx_BA_MSK)    |\
 593                          BRx_PS_8                       |\
 594                          BRx_MS_GPCM_P                  |\
 595                          BRx_V)
 596
 597 #define CFG_OR4_PRELIM  (P2SZ_TO_AM(CFG_DOC_SIZE)       |\
 598                          ORxG_ACS_DIV2                  |\
 599                          ORxG_SCY_5_CLK                 |\
 600                          ORxU_EHTR_8IDLE)
 601
 602 /* Bank 5 - FDC37C78 controller
 603  */
 604 #define CFG_BR5_PRELIM  ((CFG_FDC37C78_BASE & BRx_BA_MSK) |\
 605                          BRx_PS_8                         |\
 606                          BRx_MS_GPCM_P                    |\
 607                          BRx_V)
 608
 609 #define CFG_OR5_PRELIM  (P2SZ_TO_AM(CFG_FDC37C78_SIZE)    |\
 610                          ORxG_ACS_DIV2                    |\
 611                          ORxG_SCY_8_CLK                   |\
 612                          ORxU_EHTR_8IDLE)
 613
 614 /* Bank 6 - Board control registers
 615  */
 616 #define CFG_BR6_PRELIM  ((CFG_BCRS_BASE & BRx_BA_MSK)   |\
 617                          BRx_PS_8                       |\
 618                          BRx_MS_GPCM_P                  |\
 619                          BRx_V)
 620
 621 #define CFG_OR6_PRELIM  (P2SZ_TO_AM(CFG_BCRS_SIZE)      |\
 622                          ORxG_CSNT                      |\
 623                          ORxG_SCY_5_CLK)
 624
 625 /* Bank 7 - VME Extended Access Range
 626  */
 627 #define CFG_BR7_PRELIM  ((CFG_VMEEAR_BASE & BRx_BA_MSK) |\
 628                          BRx_PS_32                      |\
 629                          BRx_MS_GPCM_P                  |\
 630                          BRx_V)
 631
 632 #define CFG_OR7_PRELIM  (P2SZ_TO_AM(CFG_VMEEAR_SIZE)    |\
 633                          ORxG_CSNT                      |\
 634                          ORxG_ACS_DIV1                  |\
 635                          ORxG_SCY_5_CLK                 |\
 636                          ORxG_SETA)
 637
 638 /* Bank 8 - VME Standard Access Range
 639  */
 640 #define CFG_BR8_PRELIM  ((CFG_VMESAR_BASE & BRx_BA_MSK) |\
 641                          BRx_PS_16                      |\
 642                          BRx_MS_GPCM_P                  |\
 643                          BRx_V)
 644
 645 #define CFG_OR8_PRELIM  (P2SZ_TO_AM(CFG_VMESAR_SIZE)    |\
 646                          ORxG_CSNT                      |\
 647                          ORxG_ACS_DIV1                  |\
 648                          ORxG_SCY_5_CLK                 |\
 649                          ORxG_SETA)
 650
 651 /* Bank 9 - VME Short I/O Access Range
 652  */
 653 #define CFG_BR9_PRELIM  ((CFG_VMESIOAR_BASE & BRx_BA_MSK) |\
 654                          BRx_PS_16                        |\
 655                          BRx_MS_GPCM_P                    |\
 656                          BRx_V)
 657
 658 #define CFG_OR9_PRELIM  (P2SZ_TO_AM(CFG_VMESIOAR_SIZE)    |\
 659                          ORxG_CSNT                        |\
 660                          ORxG_ACS_DIV1                    |\
 661                          ORxG_SCY_5_CLK                   |\
 662                          ORxG_SETA)
 663
 664 #endif  /* __CONFIG_H */