release/src/Makefile

   1 #
   2 # Toplevel Makefile for the BCM947xx Linux Router release
   3 #
   4 # Copyright 2005, Broadcom Corporation
   5 # All Rights Reserved.
   6 #
   7 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11 #
  12 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  13 #
  14
  15 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  16
  17 # To rebuild everything and all configurations:
  18 #  make distclean
  19 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m n o
  20 # The 1st "whatever" would be the build number, the sub-whatever would
  21 #       be the update to the version.
  22 #
  23 # Example:
  24 # make V1=8516 V2="-jffs.1" a b c d m s n o
  25
  26 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  27
  28
  29
  30 export SRCBASE := $(shell pwd)
  31 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  32 PATH := $(RELEASEDIR)/tools:$(PATH)
  33 export TPROFILE := N
  34
  35 include ./target.mak
  36
  37 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  38 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  39 V1 ?= "--def"
  40 VPN ?= "VPN"
  41 ifeq ($(CONFIG_LINUX26),y)
  42 ND = "K26"
  43 else
  44 ND = "ND"
  45 endif
  46
  47 ifeq ($(NVRAM_SIZE),)
  48 NVRAM_SIZE = 0
  49 endif
  50
  51 -include tomato_profile.mak
  52
  53 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  54 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  55 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  56 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  57 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  58 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  59 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  60
  61 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
  62 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
  63 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
  64 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
  65
  66 ifeq ($(CONFIG_LINUX26),y)
  67 mips_rev = $(if $(filter $(MIPS32),r2),MIPSR2,MIPSR1)
  68 KERN_SIZE_OPT ?= n
  69 else
  70 mips_rev =
  71 KERN_SIZE_OPT ?= y
  72 endif
  73
  74 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
  75
  76 tomato_ver:
  77         @echo ""
  78         @btools/uversion.pl --gen $(V1) $(mips_rev)$(beta)$(V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
  79
  80 ifeq ($(TOMATO_BUILD),)
  81
  82 all:
  83         $(MAKE) a
  84
  85 else
  86
  87 all: tomato_ver
  88         @echo ""
  89         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
  90
  91         @echo ""
  92         @echo ""
  93
  94         @-mkdir image
  95         @$(MAKE) -C router all
  96         @$(MAKE) -C router install
  97         @$(MAKE) -C btools
  98
  99         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx
 100         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 101 ifeq ($(LINKSYS_E),1)
 102         @rm -f image/tomato-E??00$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 103 endif
 104         @echo "" >>fpkg.log
 105         @echo "***********************" `date` "************************" >>fpkg.log
 106         @cat router/shared/tomato_version >>fpkg.log
 107         @echo "" >>fpkg.log
 108         @cat router/target.info >>fpkg.log
 109 ifeq ($(wildcard include/bcm20xx.h),)
 110         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 111                 -t image/tomato.trx \
 112                 -l W54G,image/WRT54G_WRT54GL.bin \
 113                 -l W54S,image/WRT54GS.bin \
 114                 -l W54s,image/WRT54GSv4.bin \
 115                 -l W54U,image/WRTSL54GS.bin \
 116                 -m 0x10577050,image/WR850G.bin \
 117                 | tee -a fpkg.log
 118 else
 119 ifeq ($(LINKSYS_E),1)
 120         # Linksys E-series build plus generic TRX image
 121         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 122                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 123                 -l 4200,image/tomato-E4200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 124                 -l 61XN,image/tomato-E3000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 125                 -l 32XN,image/tomato-E2000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 126                 | tee -a fpkg.log
 127 else
 128         # Create generic TRX image
 129         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 130                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 131                 | tee -a fpkg.log
 132 endif
 133 endif
 134
 135         @cp fpkg.log image/fpkg-$(V1)$(mips_rev)$(beta)$(V2).log
 136         @echo ""
 137         @echo "-----------------"
 138         @echo `cat router/shared/tomato_version` " ready"
 139         @echo "-----------------"
 140 ifneq ($(NOVERSION),1)
 141         @cp router/shared/tomato_version router/shared/tomato_version_last
 142         @btools/uversion.pl --bump
 143 endif
 144 endif
 145
 146
 147
 148 clean:
 149         @touch router/.config
 150         @rm -f router/config_[a-z]
 151         @rm -f router/busybox/config_[a-z]
 152         @$(MAKE) -C router $@
 153         @-rmdir router/mipsel-uclibc
 154
 155 cleanimage:
 156         @rm -f fpkg.log
 157         @rm -fr image/*
 158         @rm -f router/.config
 159         @touch router/.config
 160         @-mkdir image
 161
 162 cleantools:
 163         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 164         @$(MAKE) -C btools clean
 165
 166 cleankernel:
 167         @cd $(LINUXDIR) && \
 168         mv .config save-config && \
 169         $(MAKE) distclean || true; \
 170         cp -p save-config .config || true
 171
 172 kernel:
 173         @$(MAKE) -C router kernel
 174         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 175
 176 distclean: clean cleanimage cleankernel cleantools
 177 ifneq ($(INSIDE_MAK),1)
 178         @$(MAKE) -C router $@ INSIDE_MAK=1
 179 endif
 180         mv router/busybox/.config busybox-saved-config || true
 181         @$(MAKE) -C router/busybox distclean
 182         @rm -f router/busybox/config_current
 183         @cp -p busybox-saved-config router/busybox/.config || true
 184         @cp -p router/busybox/.config  router/busybox/config_current || true
 185         @rm -f router/config_current
 186         @rm -f router/.config.cmd router/.config.old router/.config
 187         @rm -f router/libfoo_xref.txt
 188         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 189         @touch tomato_profile.mak
 190         @touch router/shared/tomato_profile.h
 191
 192
 193 prepk:
 194         @cd $(LINUXDIR) ; \
 195                 rm -f config_current ; \
 196                 ln -s config_base config_current ; \
 197                 cp -f config_current .config
 198         $(MAKE) -C $(LINUXDIR) oldconfig
 199 ifneq ($(CONFIG_LINUX26),y)
 200         $(MAKE) -C $(LINUXDIR) dep
 201 endif
 202
 203 what:
 204         @echo ""
 205         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 206         @echo ""
 207
 208
 209 # The methodology for making the different builds is to
 210 # copy the "base" config file to the "target" config file in
 211 # the appropriate directory, and then edit it by removing and
 212 # inserting the desired configuration lines.
 213 # You can't just delete the "whatever=y" line, you must have
 214 # a "...is not set" line, or the make oldconfig will stop and ask
 215 # what to do.
 216
 217 # Options for "make bin" :
 218 # BUILD_DESC (Std|Lite|Ext|...)
 219 # MIPS32 (r2|r1)
 220 # KERN_SIZE_OPT
 221 # USB ("USB"|"")
 222 # JFFSv1 | NO_JFFS
 223 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT
 224 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM, NOCAT
 225 # NFS BTCLIENT BTGUI TR_EXTRAS SNMP
 226
 227 define RouterOptions
 228         @( \
 229         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 230                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 231                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 232         fi; \
 233         sed -i "/TCONFIG_EMF/d" $(1); \
 234         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 235                 if [ "$(SLIM)" = "y" ]; then \
 236                         echo "# TCONFIG_EMF is not set" >>$(1); \
 237                 else \
 238                         echo "TCONFIG_EMF=y" >>$(1); \
 239                 fi; \
 240         else \
 241                 echo "# TCONFIG_EMF is not set" >>$(1); \
 242         fi; \
 243         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 244         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 245                 if [ "$(JFFSv1)" = "y" ]; then \
 246                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 247                 else \
 248                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 249                 fi; \
 250         else \
 251                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 252         fi; \
 253         if [ "$(USB)" = "USB" ]; then \
 254                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 255                 echo "TCONFIG_USB=y" >>$(1); \
 256                 if [ "$(USBEXTRAS)" = "y" ]; then \
 257                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 258                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 259                 fi; \
 260                 if [ "$(NTFS)" = "y" ]; then \
 261                         sed -i "/TCONFIG_NTFS/d" $(1); \
 262                         echo "TCONFIG_NTFS=y" >>$(1); \
 263                 fi; \
 264                 if [ "$(MEDIASRV)" = "y" ]; then \
 265                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 266                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 267                 fi; \
 268         else \
 269                 sed -i "/TCONFIG_USB=y/d" $(1); \
 270                 echo "# TCONFIG_USB is not set" >>$(1); \
 271         fi; \
 272         if [ "$(NO_SAMBA)" = "y" ]; then \
 273                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 274                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 275         fi; \
 276         if [ "$(NO_ZEBRA)" = "y" ]; then \
 277                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 278                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 279         fi; \
 280         if [ "$(NO_JFFS)" = "y" ]; then \
 281                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 282                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 283                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 284                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 285         fi; \
 286         if [ "$(NO_CIFS)" = "y" ]; then \
 287                 sed -i "/TCONFIG_CIFS/d" $(1); \
 288                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 289         fi; \
 290         if [ "$(NO_SSH)" = "y" ]; then \
 291                 sed -i "/TCONFIG_SSH/d" $(1); \
 292                 echo "# TCONFIG_SSH is not set" >>$(1); \
 293         fi; \
 294         if [ "$(NO_HTTPS)" = "y" ]; then \
 295                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 296                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 297         fi; \
 298         if [ "$(NO_XXTP)" = "y" ]; then \
 299                 sed -i "/TCONFIG_L2TP/d" $(1); \
 300                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 301                 sed -i "/TCONFIG_PPTP/d" $(1); \
 302                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 303         fi; \
 304         if [ "$(NO_LIBOPT)" = "y" ]; then \
 305                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 306                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 307         fi; \
 308         if [ "$(EBTABLES)" = "y" ]; then \
 309                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 310                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 311         fi; \
 312         if [ "$(IPV6SUPP)" = "y" ]; then \
 313                 sed -i "/TCONFIG_IPV6/d" $(1); \
 314                 echo "TCONFIG_IPV6=y" >>$(1); \
 315         fi; \
 316         if [ "$(NOCAT)" = "y" ]; then \
 317                 sed -i "/TCONFIG_NOCAT/d" $(1); \
 318                 echo "TCONFIG_NOCAT=y" >>$(1); \
 319         fi; \
 320         if [ "$(OPENVPN)" = "y" ]; then \
 321                 sed -i "/TCONFIG_LZO/d" $(1); \
 322                 echo "TCONFIG_LZO=y" >>$(1); \
 323                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 324                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 325                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 326                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 327                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 328                 fi; \
 329         fi; \
 330         if [ "$(BTCLIENT)" = "y" ]; then \
 331                 sed -i "/TCONFIG_BT/d" $(1); \
 332                 echo "TCONFIG_BT=y" >>$(1); \
 333                 sed -i "/TCONFIG_BBT/d" $(1); \
 334                 echo "TCONFIG_BBT=y" >>$(1); \
 335         fi; \
 336         if [ "$(BTGUI)" = "y" ]; then \
 337                 sed -i "/TCONFIG_BT/d" $(1); \
 338                 echo "TCONFIG_BT=y" >>$(1); \
 339         fi; \
 340         if [ "$(TR_EXTRAS)" = "y" ]; then \
 341                 sed -i "/TCONFIG_TR_EXTRAS/d" $(1); \
 342                 echo "TCONFIG_TR_EXTRAS=y" >>$(1); \
 343         fi; \
 344         if [ "$(NFS)" = "y" ]; then \
 345                 sed -i "/TCONFIG_NFS/d" $(1); \
 346                 echo "TCONFIG_NFS=y" >>$(1); \
 347         fi; \
 348         if [ "$(SNMP)" = "y" ]; then \
 349                 sed -i "/TCONFIG_SNMP/d" $(1); \
 350                 echo "TCONFIG_SNMP=y" >>$(1); \
 351         fi; \
 352         )
 353 endef
 354
 355 define BusyboxOptions
 356         @( \
 357         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 358                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 359                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 360                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 361                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 362                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 363                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 364                 sed -i "/CONFIG_MKNOD/d" $(1); \
 365                 echo "CONFIG_MKNOD=y" >>$(1); \
 366                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 367                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 368         fi; \
 369         if [ "$(NO_CIFS)" = "y" ]; then \
 370                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 371                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 372         fi; \
 373         if [ "$(BBEXTRAS)" = "y" ]; then \
 374                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 375                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 376                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 377                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 378                 sed -i "/CONFIG_CLEAR/d" $(1); \
 379                 echo "CONFIG_CLEAR=y" >>$(1); \
 380                 sed -i "/CONFIG_NICE/d" $(1); \
 381                 echo "CONFIG_NICE=y" >>$(1); \
 382                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 383                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 384                 sed -i "/CONFIG_SEQ/d" $(1); \
 385                 echo "CONFIG_SEQ=y" >>$(1); \
 386                 sed -i "/CONFIG_STTY/d" $(1); \
 387                 echo "CONFIG_STTY=y" >>$(1); \
 388         fi; \
 389         if [ "$(USB)" = "USB" ]; then \
 390                 if [ "$(USBEXTRAS)" = "y" ]; then \
 391                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 392                         echo "CONFIG_E2FSCK=y" >>$(1); \
 393                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 394                         echo "CONFIG_MKE2FS=y" >>$(1); \
 395                         sed -i "/CONFIG_FDISK/d" $(1); \
 396                         echo "CONFIG_FDISK=y" >>$(1); \
 397                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 398                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 399                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 400                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 401                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 402                         echo "CONFIG_MKSWAP=y" >>$(1); \
 403                         sed -i "/CONFIG_FLOCK/d" $(1); \
 404                         echo "CONFIG_FLOCK=y" >>$(1); \
 405                         sed -i "/CONFIG_FSYNC/d" $(1); \
 406                         echo "CONFIG_FSYNC=y" >>$(1); \
 407                         sed -i "/CONFIG_UNZIP/d" $(1); \
 408                         echo "CONFIG_UNZIP=y" >>$(1); \
 409                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 410                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 411                                 echo "CONFIG_LSUSB=y" >>$(1); \
 412                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 413                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 414                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 415                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 416                         fi; \
 417                 fi; \
 418         else \
 419                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 420                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 421                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 422                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 423                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 424                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 425                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 426                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 427                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 428                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 429                 sed -i "/CONFIG_BLKID/d" $(1); \
 430                 echo "# CONFIG_BLKID is not set" >>$(1); \
 431                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 432                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 433                 sed -i "/CONFIG_CHROOT/d" $(1); \
 434                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 435                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 436                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 437                 sed -i "/CONFIG_TRUE/d" $(1); \
 438                 echo "# CONFIG_TRUE is not set" >>$(1); \
 439         fi; \
 440         if [ "$(IPV6SUPP)" = "y" ]; then \
 441                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 442                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 443                 sed -i "/CONFIG_PING6/d" $(1); \
 444                 echo "CONFIG_PING6=y" >>$(1); \
 445                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 446                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 447                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 448                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 449                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 450                 fi; \
 451         fi; \
 452         if [ "$(SLIM)" = "y" ]; then \
 453                 sed -i "/CONFIG_AWK/d" $(1); \
 454                 echo "# CONFIG_AWK is not set" >>$(1); \
 455                 sed -i "/CONFIG_BASENAME/d" $(1); \
 456                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 457                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 458                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 459                 sed -i "/CONFIG_BLKID/d" $(1); \
 460                 echo "# CONFIG_BLKID is not set" >>$(1); \
 461                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 462                 echo "# CONFIG_TELNET is not set" >>$(1); \
 463                 sed -i "/CONFIG_ARPING/d" $(1); \
 464                 echo "# CONFIG_ARPING is not set" >>$(1); \
 465                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 466                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 467                 sed -i "/CONFIG_CHOWN/d" $(1); \
 468                 echo "# CONFIG_CHOWN is not set" >>$(1); \
 469         else \
 470                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 471                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 472                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 473                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 474         fi; \
 475         )
 476 endef
 477
 478 define KernelConfig
 479         @( \
 480         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 481         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 482         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 483         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 484                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 485         else \
 486                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 487         fi; \
 488         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 489                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 490                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 491                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 492                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 493                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 494                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 495         fi; \
 496         if [ "$(USB)" = "" ]; then \
 497                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 498                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 499         fi; \
 500         if [ "$(IPV6SUPP)" = "y" ]; then \
 501                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 502                 echo "CONFIG_IPV6=y" >>$(1); \
 503                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 504                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 505                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 506                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 507                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 508                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 509                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 510                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 511                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 512                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 513                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 514                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 515                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 516                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 517                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 518                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 519                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 520                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 521                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 522                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 523                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 524                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 525                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 526                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 527                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 528                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 529                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 530                         sed -i "/CONFIG_IPV6_OPTIMISTIC_DAD/d" $(1); \
 531                         echo "CONFIG_IPV6_OPTIMISTIC_DAD=y" >>$(1); \
 532                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 533                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 534                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 535                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 536                 else \
 537                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 538                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 539                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 540                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 541                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 542                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 543                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 544                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 545                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 546                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 547                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 548                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 549                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 550                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 551                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 552                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 553                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 554                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 555                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 556                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 557                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 558                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 559                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 560                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 561                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 562                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 563                 fi; \
 564         fi; \
 565         sed -i "/CONFIG_BCM57XX/d" $(1); \
 566         if [ "$(BCM57)" = "y" ]; then \
 567                 echo "CONFIG_BCM57XX=m" >>$(1); \
 568         else \
 569                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 570         fi; \
 571         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 572                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 573                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 574                 if [ "$(IPV6SUPP)" = "y" ]; then \
 575                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 576                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 577                 fi; \
 578         fi; \
 579         )
 580 endef
 581
 582
 583 bin:
 584 ifeq ($(B),)
 585         @echo $@" is not a valid target!"
 586         @false
 587 endif
 588         @cp router/config_base router/config_$(lowercase_B)
 589         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 590         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 591
 592         $(call RouterOptions, router/config_$(lowercase_B))
 593         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 594         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 595
 596         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)"
 597         @$(MAKE) all
 598
 599 ## Make the "normal with Extras and NTFS + IPv6" = Ext
 600 m:
 601 ifeq ($(CONFIG_LINUX26),y)
 602         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Ext" USB="USB" SNMP=y
 603 else
 604         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Ext" USB="USB"
 605 endif
 606
 607 ## Make the "Ext + VPN" = VPN
 608 e:
 609 ifeq ($(CONFIG_LINUX26),y)
 610         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="$(VPN)" USB="USB" SNMP=y
 611 else
 612         @$(MAKE) bin OPENVPN=y BBEXTRAS=y USBEXTRAS=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB"
 613 endif
 614
 615 ## Make the "Ext + BTGUI" = BTgui
 616 c:
 617 ifeq ($(CONFIG_LINUX26),y)
 618         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BTgui" USB="USB" BTGUI=y SNMP=y
 619 else
 620         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="BTgui" USB="USB" BTGUI=y
 621 endif
 622
 623 ## Make the "Ext + BT" = BT
 624 r:
 625 ifeq ($(CONFIG_LINUX26),y)
 626         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BT" USB="USB" BTCLIENT=y SNMP=y
 627 else
 628         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="BT" USB="USB" BTCLIENT=y SNMP=y
 629 endif
 630
 631 ## Make the "BT + VPN" = BT-VPN
 632 t:
 633 ifeq ($(CONFIG_LINUX26),y)
 634         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BT-VPN" USB="USB" BTCLIENT=y SNMP=y
 635 else
 636         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="BT-VPN" USB="USB" BTCLIENT=y SNMP=y
 637 endif
 638
 639 ## Make the "Ext + NOCAT + NFS + BTGUI" = Big
 640 a:
 641 ifeq ($(CONFIG_LINUX26),y)
 642         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Big" USB="USB" BTGUI=y NFS=y NOCAT=y SNMP=y
 643 else
 644         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Big" USB="USB" BTGUI=y NOCAT=y NFS=y SNMP=y
 645 endif
 646
 647 ## Make the "Big + VPN" = Big-VPN
 648 b:
 649 ifeq ($(CONFIG_LINUX26),y)
 650         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Big-VPN" USB="USB" BTGUI=y NFS=y NOCAT=y OPENVPN=y SNMP=y
 651 else
 652         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Big-VPN" USB="USB" BTGUI=y NOCAT=y NFS=y OPENVPN=y SNMP=y
 653 endif
 654
 655 ## Make the "Big + BT + NFS" = Mega
 656 n:
 657 ifeq ($(CONFIG_LINUX26),y)
 658         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="Mega" USB="USB" NFS=y BTCLIENT=y SNMP=y NO_JFFS=y
 659 else
 660         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=E BUILD_DESC="Mega" USB="USB" BTCLIENT=y NFS=y SNMP=y NO_JFFS=y
 661 endif
 662
 663 ## Make the "Big + VPN + BT + NOCAT - NFS" = Mega-VPN
 664 o:
 665 ifeq ($(CONFIG_LINUX26),y)
 666         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="Mega-VPN" USB="USB" NOCAT=y BTCLIENT=y SNMP=y
 667 else
 668         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y B=E BUILD_DESC="Mega-VPN" USB="USB" BTCLIENT=y NOCAT=y SNMP=y
 669 endif
 670
 671 ## Make the "No USB" = Std
 672 s:
 673 ifeq ($(CONFIG_LINUX26),y)
 674         @$(MAKE) bin JFFSv1=y $(if $(filter r2, $(MIPS32)),,BCM57=y) B=S BUILD_DESC="Std" USB=""
 675 else
 676         @$(MAKE) bin BBEXTRAS=y BCM57=y B=S BUILD_DESC="Std" USB=""
 677 endif
 678
 679 ## Make the "Mini: no USB, no CIFS, no Zebra" build - targeted for Netgear routers
 680 f:
 681         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y B=F BUILD_DESC="Mini" USB=""
 682
 683 ifeq ($(CONFIG_LINUX26),y)
 684 ## Make the "No USB with IPv6, no Zebra" build - for 4MB routers
 685 i:
 686         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB=""
 687 endif
 688
 689 ifeq ($(CONFIG_LINUX26),y)
 690 ## Make the "No USB with IPv6, no Zebra, with VPN" build - for 4MB routers
 691 j:
 692         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_XXTP=y SLIM=y NO_SAMBA=y NO_ZEBRA=y IPV6SUPP=y OPENVPN=y NO_LIBOPT=y B=I BUILD_DESC="MiniIPv6-VPN" USB=""
 693 endif
 694
 695 ## Make the "VPN witn no USB support"
 696 v:
 697 ifeq ($(CONFIG_LINUX26),y)
 698         @$(MAKE) bin OPENVPN=y NO_JFFS=y B=V BUILD_DESC="$(VPN)" USB=""
 699 else
 700         @$(MAKE) bin OPENVPN=y BBEXTRAS=y BCM57=y B=V BUILD_DESC="$(VPN)" USB=""
 701 endif
 702
 703 ## Make the "All-In-One (AIO)" MIPS1 - only for router with more than 8MB flash!! ZTE H618B
 704 z:
 705 ifeq ($(CONFIG_LINUX26),y)
 706         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="AIO" USB="USB" NOCAT=y BTCLIENT=y NFS=y TR_EXTRAS=y SNMP=y
 707 endif
 708
 709 ## Make Mips32r2 builds
 710 r2m:
 711         @$(MAKE) m MIPS32=r2
 712
 713 r2e:
 714         @$(MAKE) e MIPS32=r2
 715
 716 r2c:
 717         @$(MAKE) c MIPS32=r2
 718
 719 r2r:
 720         @$(MAKE) r MIPS32=r2
 721
 722 r2t:
 723         @$(MAKE) t MIPS32=r2
 724
 725 r2a:
 726         @$(MAKE) a MIPS32=r2
 727
 728 r2b:
 729         @$(MAKE) b MIPS32=r2
 730
 731 r2n:
 732         @$(MAKE) n MIPS32=r2
 733
 734 r2o:
 735         @$(MAKE) o MIPS32=r2
 736
 737 #AIO MIPS2 for RT-N16 and E4200
 738 r2z:
 739         @$(MAKE) z MIPS32=r2
 740
 741 r2s:
 742         @$(MAKE) s MIPS32=r2
 743
 744 r2v:
 745         @$(MAKE) v MIPS32=r2
 746
 747 r2i:
 748         @$(MAKE) i MIPS32=r2
 749
 750 r2j:
 751         @$(MAKE) j MIPS32=r2
 752
 753 r2f:
 754         @$(MAKE) f MIPS32=r2
 755
 756 n60m:
 757         @$(MAKE) r2m NVRAM_SIZE=60 LINKSYS_E=1
 758
 759 n60c:
 760         @$(MAKE) r2c NVRAM_SIZE=60 LINKSYS_E=1
 761
 762 n60r:
 763         @$(MAKE) r2r NVRAM_SIZE=60 LINKSYS_E=1
 764
 765 n60t:
 766         @$(MAKE) r2t NVRAM_SIZE=60 LINKSYS_E=1
 767
 768 n60a:
 769         @$(MAKE) r2a NVRAM_SIZE=60 LINKSYS_E=1
 770
 771 n60b:
 772         @$(MAKE) r2b NVRAM_SIZE=60 LINKSYS_E=1
 773
 774 n60e:
 775         @$(MAKE) r2e NVRAM_SIZE=60 LINKSYS_E=1
 776
 777 n60n:
 778         @$(MAKE) r2n NVRAM_SIZE=60 LINKSYS_E=1
 779
 780 n60o:
 781         @$(MAKE) r2o NVRAM_SIZE=60 LINKSYS_E=1
 782
 783 #AIO for E4200
 784 n60z:
 785         @$(MAKE) r2z NVRAM_SIZE=60 LINKSYS_E=1
 786
 787 n60s:
 788         @$(MAKE) bin MIPS32=r2 B=S USB="" NVRAM_SIZE=60 LINKSYS_E=1 BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y BUILD_DESC="Std"
 789
 790 n60v:
 791         @$(MAKE) bin MIPS32=r2 B=V USB="" NVRAM_SIZE=60 LINKSYS_E=1 BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y OPENVPN=y BUILD_DESC="$(VPN)"
 792
 793 setprofile:
 794         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
 795         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
 796         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
 797         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
 798         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
 799         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
 800         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
 801         echo '#define TOMATO_BUILD_DESC "$(DESC)"' >> router/shared/tomato_profile.h
 802         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
 803         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
 804         echo '#endif' >> router/shared/tomato_profile.h
 805         echo '#endif' >> router/shared/tomato_profile.h
 806
 807         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
 808         echo 'PROFILE_G = 1' >> tomato_profile.mak
 809         echo 'PROFILE_N = 2' >> tomato_profile.mak
 810         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
 811         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
 812         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
 813         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
 814         echo 'TOMATO_BUILD_DESC = "$(DESC)"' >> tomato_profile.mak
 815         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
 816         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
 817         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
 818
 819         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE))' >> tomato_profile.mak
 820
 821 # Note that changes to variables in tomato_profile.mak don't
 822 # get propogated to this invocation of make!
 823         @echo ""
 824         @echo "Using $(N) profile, $(B) build config."
 825         @echo ""
 826
 827         @cd $(LINUXDIR) ; \
 828                 rm -f config_current ; \
 829                 ln -s config_$(lowercase_B) config_current ; \
 830                 cp -f config_current .config
 831
 832         @cd router/busybox && \
 833                 rm -f config_current ; \
 834                 ln -s config_$(lowercase_B) config_current ; \
 835                 cp config_current .config
 836
 837         @cd router ; \
 838                 rm -f config_current ; \
 839                 ln -s config_$(lowercase_B) config_current ; \
 840                 cp config_current .config
 841
 842         @$(MAKE) -C router oldconfig
 843
 844 help:
 845         @echo "m            Ext - (standard plus extra utilities and NTFS support)"
 846         @echo "c            BTgui - (Ext plus BT gui)"
 847         @echo "r            BT - (Ext plus BT Client)"
 848         @echo "t            BT-VPN - (BT plus VPN)"
 849         @echo "a            Big - (Ext plus NOCAT plus NFS plus BT gui)"
 850         @echo "n            Mega - (Big + BT Client minus NOCAT)"
 851         @echo "e            VPN - (standard plus VPN, extra utilities and NTFS support)"
 852         @echo "b            Big-VPN - (Big plus VPN)"
 853         @echo "o            Mega-VPN - (Mega plus VPN plus NOCAT minus NFS)"
 854 ifeq ($(CONFIG_LINUX26),y)
 855         @echo "i            MiniIPv6 - (IPv6 with no USB support minus CIFS and RIPv1/2)"
 856 endif
 857         @echo "s            Std - (no USB support)"
 858         @echo "f            Mini - (no USB support minus CIFS and RIPv1/2)"
 859         @echo "v            VPN (no usb) - (VPN with no USB support)"
 860 ifeq ($(CONFIG_LINUX26),y)
 861         @echo "r2m          MIPS Release 2 Ext"
 862         @echo "r2c          MIPS Release 2 BTgui"
 863         @echo "r2r          MIPS Release 2 BT"
 864         @echo "r2t          MIPS Release 2 BT-VPN"
 865         @echo "r2a          MIPS Release 2 Big"
 866         @echo "r2n          MIPS Release 2 Mega"
 867         @echo "r2e          MIPS Release 2 VPN"
 868         @echo "r2b          MIPS Release 2 Big-VPN"
 869         @echo "r2o          MIPS Release 2 Mega-VPN"
 870         @echo "r2z          MIPS Release 2 AIO (for routers +8MB flash)"
 871         @echo "r2v          MIPS Release 2 VPN (no usb)"
 872         @echo "r2s          MIPS Release 2 Std"
 873         @echo "r2i          MIPS Release 2 MiniIPv6 (for 4MB flash)"
 874         @echo "r2f          MIPS Release 2 Mini (for netgear)"
 875         @echo "n60m         Linksys E-series build Ext"
 876         @echo "n60c         Linksys E-series build BTGui"
 877         @echo "n60r         Linksys E-series build BT"
 878         @echo "n60t         Linksys E-series build BT-VPN"
 879         @echo "n60a         Linksys E-series build Big"
 880         @echo "n60n         Linksys E-series build Mega"
 881         @echo "n60e         Linksys E-series build VPN"
 882         @echo "n60b         Linksys E-series build Big-VPN"
 883         @echo "n60o         Linksys E-series build Mega-VPN"
 884         @echo "n60s         Linksys E-series build Std with IPv6"
 885         @echo "n60v         Linksys E-series build VPN with IPv6"
 886 endif
 887         @echo "..etc..      other build configs"
 888         @echo "clean        -C router clean"
 889         @echo "cleanimage   rm -rf image"
 890         @echo "cleantools   clean btools, mksquashfs"
 891         @echo "cleankernel  -C Linux distclean (but preserves .config)"
 892         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
 893         @echo "prepk        -C Linux oldconfig dep"
 894
 895 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
 896 .PHONY: a b c d m nc Makefile allversions tomato_profile.mak