release/src-rt-6.x.4708/shared/nvram/bcm95350rg.txt

   1 # BCM95350RG sdram board
   2 # $Copyright Open Broadcom Corporation$
   3 # $Id: bcm95350rg.txt,v 1.16 2005-03-03 20:05:11 mdeb Exp $
   4 boardtype=0x456
   5 boardnum=${serno}
   6 # Board revision 1.0
   7 boardrev=0x25
   8 boardflags=0x0f58
   9 sromrev=2
  10
  11 # MIPS clock frequency in MHz
  12 clkfreq=200
  13
  14 # 64 MB SDR SDRAM (16 Meg x 16 x 2)
  15 sdram_init=0x2008
  16 sdram_config=0x32
  17 sdram_refresh=0x0
  18 sdram_ncdl=0
  19
  20 # Ethernet w/Robo switch
  21 et0macaddr=00:90:4c:7d:${maclo}
  22 et0phyaddr=30
  23 et0mdcport=0
  24
  25 # Bootloader variables
  26 dl_ram_addr=a0001000
  27 os_ram_addr=80001000
  28 os_flash_addr=bfc40000
  29 lan_ipaddr=192.168.1.1
  30 lan_netmask=255.255.255.0
  31 scratch=a0180000
  32 boot_wait=on
  33 reset_gpio=7
  34
  35 # Watchdog timer in ms
  36 watchdog=3000
  37
  38 # Make the d11 i/f single band
  39 wl0id=0x4320
  40
  41 # 5350 802.11g parameters
  42 il0macaddr=00:90:4c:7e:${maclo}
  43 aa0=1
  44 ag0=255
  45 pa0maxpwr=76
  46 pa0itssit=62
  47 pa0b0=0x15ca
  48 pa0b1=0xfa7d
  49 pa0b2=0xfe81
  50 opo=16
  51
  52 # Commons wireless parameters
  53 ccode=0
  54
  55 # Robo switch config (vlan0:LAN, vlan1:WAN)
  56 vlan0hwname=et0
  57 vlan0ports=1 2 3 4 5*
  58 vlan1hwname=et0
  59 vlan1ports=0 5u
  60
  61 # Bootloader and OS glue
  62 landevs=vlan0 wl0
  63 wandevs=et0