release/src-rt-6.x.4708/shared/nvram/bcm94712lgr-sd-sw.txt

   1 # BCM94712LGR SDR board as L2 switch
   2 # $Copyright Open Broadcom Corporation$
   3 # $Id: bcm94712lgr-sd-sw.txt,v 1.1 2004-06-30 22:47:34 jqliu Exp $
   4 boardtype=0x0460
   5 boardnum=${serno}
   6 # Board revision 1.0
   7 boardrev=0x10
   8 boardflags=0x0618
   9 sromrev=2
  10
  11 # MIPS clock frequency in MHz
  12 clkfreq=200
  13
  14 # 8 MB SDR SDRAM (4 Meg x 16)
  15 sdram_init=2
  16 sdram_config=0x0022
  17 sdram_refresh=0x0000
  18 sdram_ncdl=0
  19
  20 # Ethernet w/BCM5325E switch
  21 et0macaddr=00:90:4c:88:${maclo}
  22 et0phyaddr=30
  23 et0mdcport=0
  24
  25 # BCM5325E switch reset
  26 gpio6=robo_reset
  27
  28 # Make the d11 i/f single band
  29 wl0id=0x4320
  30
  31 # 4712 802.11g parameters
  32 il0macaddr=00:90:4c:89:${maclo}
  33 aa0=3
  34 ag0=2
  35 pa0maxpwr=60
  36 pa0itssit=62
  37 pa0b0=0x1599
  38 pa0b1=0xfad3
  39 pa0b2=0xfed4
  40
  41 # Commons wireless parameters
  42 cctl=0
  43 ccode=0
  44
  45 # Bootlaoder variables
  46 dl_ram_addr=a0001000
  47 os_ram_addr=80001000
  48 os_flash_addr=bfc40000
  49 lan_ipaddr=192.168.1.1
  50 lan_netmask=255.255.255.0
  51 scratch=a0180000
  52 boot_wait=on
  53
  54 # Watchdog timer in ms
  55 watchdog=3000
  56
  57 # Bootloader and OS glue
  58 landevs=et0 wl0
  59 wandevs=
  60