release/src-rt-6.x.4708/linux/linux-2.6.36/sound/pci/azt3328.h

   1 #ifndef __SOUND_AZT3328_H
   2 #define __SOUND_AZT3328_H
   3
   4 /* "PU" == "power-up value", as tested on PCI168 PCI rev. 10
   5  * "WRITE_ONLY"  == register does not indicate actual bit values */
   6
   7 /*** main I/O area port indices ***/
   8 /* (only 0x70 of 0x80 bytes saved/restored by Windows driver) */
   9 #define AZF_IO_SIZE_CTRL        0x80
  10 #define AZF_IO_SIZE_CTRL_PM     0x70
  11
  12 /* the driver initialisation suggests a layout of 4 areas
  13  * within the main card control I/O:
  14  * from 0x00 (playback codec), from 0x20 (recording codec)
  15  * and from 0x40 (most certainly I2S out codec).
  16  * And another area from 0x60 to 0x6f (DirectX timer, IRQ management,
  17  * power management etc.???). */
  18
  19 #define AZF_IO_OFFS_CODEC_PLAYBACK      0x00
  20 #define AZF_IO_OFFS_CODEC_CAPTURE       0x20
  21 #define AZF_IO_OFFS_CODEC_I2S_OUT       0x40
  22
  23 #define IDX_IO_CODEC_DMA_FLAGS       0x00 /* PU:0x0000 */
  24      /* able to reactivate output after output muting due to 8/16bit
  25       * output change, just like 0x0002.
  26       * 0x0001 is the only bit that's able to start the DMA counter */
  27   #define DMA_RESUME                    0x0001 /* paused if cleared? */
  28      /* 0x0002 *temporarily* set during DMA stopping. hmm
  29       * both 0x0002 and 0x0004 set in playback setup. */
  30      /* able to reactivate output after output muting due to 8/16bit
  31       * output change, just like 0x0001. */
  32   #define DMA_RUN_SOMETHING1            0x0002 /* \ alternated (toggled) */
  33      /* 0x0004: NOT able to reactivate output */
  34   #define DMA_RUN_SOMETHING2            0x0004 /* / bits */
  35   #define SOMETHING_ALMOST_ALWAYS_SET   0x0008 /* ???; can be modified */
  36   #define DMA_EPILOGUE_SOMETHING        0x0010
  37   #define DMA_SOMETHING_ELSE            0x0020 /* ??? */
  38   #define SOMETHING_UNMODIFIABLE        0xffc0 /* unused? not modifiable */
  39 #define IDX_IO_CODEC_IRQTYPE     0x02 /* PU:0x0001 */
  40   /* write back to flags in case flags are set, in order to ACK IRQ in handler
  41    * (bit 1 of port 0x64 indicates interrupt for one of these three types)
  42    * sometimes in this case it just writes 0xffff to globally ACK all IRQs
  43    * settings written are not reflected when reading back, though.
  44    * seems to be IRQ, too (frequently used: port |= 0x07 !), but who knows? */
  45   #define IRQ_SOMETHING                 0x0001 /* something & ACK */
  46   #define IRQ_FINISHED_DMABUF_1         0x0002 /* 1st dmabuf finished & ACK */
  47   #define IRQ_FINISHED_DMABUF_2         0x0004 /* 2nd dmabuf finished & ACK */
  48   #define IRQMASK_SOME_STATUS_1         0x0008 /* \ related bits */
  49   #define IRQMASK_SOME_STATUS_2         0x0010 /* / (checked together in loop) */
  50   #define IRQMASK_UNMODIFIABLE          0xffe0 /* unused? not modifiable */
  51   /* start address of 1st DMA transfer area, PU:0x00000000 */
  52 #define IDX_IO_CODEC_DMA_START_1 0x04
  53   /* start address of 2nd DMA transfer area, PU:0x00000000 */
  54 #define IDX_IO_CODEC_DMA_START_2 0x08
  55   /* both lengths of DMA transfer areas, PU:0x00000000
  56      length1: offset 0x0c, length2: offset 0x0e */
  57 #define IDX_IO_CODEC_DMA_LENGTHS 0x0c
  58 #define IDX_IO_CODEC_DMA_CURRPOS 0x10 /* current DMA position, PU:0x00000000 */
  59   /* offset within current DMA transfer area, PU:0x0000 */
  60 #define IDX_IO_CODEC_DMA_CURROFS 0x14
  61 #define IDX_IO_CODEC_SOUNDFORMAT 0x16 /* PU:0x0010 */
  62   /* all unspecified bits can't be modified */
  63   #define SOUNDFORMAT_FREQUENCY_MASK    0x000f
  64   #define SOUNDFORMAT_XTAL1             0x00
  65   #define SOUNDFORMAT_XTAL2             0x01
  66     /* all _SUSPECTED_ values are not used by Windows drivers, so we don't
  67      * have any hard facts, only rough measurements.
  68      * All we know is that the crystal used on the board has 24.576MHz,
  69      * like many soundcards (which results in the frequencies below when
  70      * using certain divider values selected by the values below) */
  71     #define SOUNDFORMAT_FREQ_SUSPECTED_4000     0x0c | SOUNDFORMAT_XTAL1
  72     #define SOUNDFORMAT_FREQ_SUSPECTED_4800     0x0a | SOUNDFORMAT_XTAL1
  73     #define SOUNDFORMAT_FREQ_5510               0x0c | SOUNDFORMAT_XTAL2
  74     #define SOUNDFORMAT_FREQ_6620               0x0a | SOUNDFORMAT_XTAL2
  75     #define SOUNDFORMAT_FREQ_8000               0x00 | SOUNDFORMAT_XTAL1 /* also 0x0e | SOUNDFORMAT_XTAL1? */
  76     #define SOUNDFORMAT_FREQ_9600               0x08 | SOUNDFORMAT_XTAL1
  77     #define SOUNDFORMAT_FREQ_11025              0x00 | SOUNDFORMAT_XTAL2 /* also 0x0e | SOUNDFORMAT_XTAL2? */
  78     #define SOUNDFORMAT_FREQ_SUSPECTED_13240    0x08 | SOUNDFORMAT_XTAL2 /* seems to be 6620 *2 */
  79     #define SOUNDFORMAT_FREQ_16000              0x02 | SOUNDFORMAT_XTAL1
  80     #define SOUNDFORMAT_FREQ_22050              0x02 | SOUNDFORMAT_XTAL2
  81     #define SOUNDFORMAT_FREQ_32000              0x04 | SOUNDFORMAT_XTAL1
  82     #define SOUNDFORMAT_FREQ_44100              0x04 | SOUNDFORMAT_XTAL2
  83     #define SOUNDFORMAT_FREQ_48000              0x06 | SOUNDFORMAT_XTAL1
  84     #define SOUNDFORMAT_FREQ_SUSPECTED_66200    0x06 | SOUNDFORMAT_XTAL2 /* 66200 (13240 * 5); 64000 may have been nicer :-\ */
  85   #define SOUNDFORMAT_FLAG_16BIT        0x0010
  86   #define SOUNDFORMAT_FLAG_2CHANNELS    0x0020
  87
  88
  89 /* define frequency helpers, for maximum value safety */
  90 enum azf_freq_t {
  91 #define AZF_FREQ(rate) AZF_FREQ_##rate = rate
  92   AZF_FREQ(4000),
  93   AZF_FREQ(4800),
  94   AZF_FREQ(5512),
  95   AZF_FREQ(6620),
  96   AZF_FREQ(8000),
  97   AZF_FREQ(9600),
  98   AZF_FREQ(11025),
  99   AZF_FREQ(13240),
 100   AZF_FREQ(16000),
 101   AZF_FREQ(22050),
 102   AZF_FREQ(32000),
 103   AZF_FREQ(44100),
 104   AZF_FREQ(48000),
 105   AZF_FREQ(66200),
 106 #undef AZF_FREQ
 107 };
 108
 109 #define IDX_IO_TIMER_VALUE      0x60 /* found this timer area by pure luck :-) */
 110   /* timer countdown value; triggers IRQ when timer is finished */
 111   #define TIMER_VALUE_MASK              0x000fffffUL
 112   /* activate timer countdown */
 113   #define TIMER_COUNTDOWN_ENABLE        0x01000000UL
 114   /* trigger timer IRQ on zero transition */
 115   #define TIMER_IRQ_ENABLE              0x02000000UL
 116   /* being set in IRQ handler in case port 0x00 (hmm, not port 0x64!?!?)
 117    * had 0x0020 set upon IRQ handler */
 118   #define TIMER_IRQ_ACK                 0x04000000UL
 119 #define IDX_IO_IRQSTATUS        0x64
 120   /* some IRQ bit in here might also be used to signal a power-management timer
 121    * timeout, to request shutdown of the chip (e.g. AD1815JS has such a thing).
 122    * OPL3 hardware contains several timers which confusingly in most cases
 123    * are NOT routed to an IRQ, but some designs (e.g. LM4560) DO support that,
 124    * so I wouldn't be surprised at all to discover that AZF3328
 125    * supports that thing as well... */
 126
 127   #define IRQ_PLAYBACK  0x0001
 128   #define IRQ_RECORDING 0x0002
 129   #define IRQ_I2S_OUT   0x0004 /* this IS I2S, right!? (untested) */
 130   #define IRQ_GAMEPORT  0x0008 /* Interrupt of Digital(ly) Enhanced Game Port */
 131   #define IRQ_MPU401    0x0010
 132   #define IRQ_TIMER     0x0020 /* DirectX timer */
 133   #define IRQ_UNKNOWN2  0x0040 /* probably unused, or possibly OPL3 timer? */
 134   #define IRQ_UNKNOWN3  0x0080 /* probably unused, or possibly OPL3 timer? */
 135 #define IDX_IO_66H              0x66    /* writing 0xffff returns 0x0000 */
 136   /* this is set to e.g. 0x3ff or 0x300, and writable;
 137    * maybe some buffer limit, but I couldn't find out more, PU:0x00ff: */
 138 #define IDX_IO_SOME_VALUE       0x68
 139   #define IO_68_RANDOM_TOGGLE1  0x0100  /* toggles randomly */
 140   #define IO_68_RANDOM_TOGGLE2  0x0200  /* toggles randomly */
 141   /* umm, nope, behaviour of these bits changes depending on what we wrote
 142    * to 0x6b!!
 143    * And they change upon playback/stop, too:
 144    * Writing a value to 0x68 will display this exact value during playback,
 145    * too but when stopped it can fall back to a rather different
 146    * seemingly random value). Hmm, possibly this is a register which
 147    * has a remote shadow which needs proper device supply which only exists
 148    * in case playback is active? Or is this driver-induced?
 149    */
 150
 151 #define IDX_IO_6AH              0x6A /* WRITE_ONLY! */
 152   /* bit 5: enabling this will activate permanent counting of bytes 2/3
 153    * at gameport I/O (0xb402/3) (equal values each) and cause
 154    * gameport legacy I/O at 0x0200 to be _DISABLED_!
 155    * Is this Digital Enhanced Game Port Enable??? Or maybe it's Testmode
 156    * for Enhanced Digital Gameport (see 4D Wave DX card): */
 157   #define IO_6A_SOMETHING1_GAMEPORT     0x0020
 158   /* bit 8; sure, this _pauses_ playback (later resumes at same spot!),
 159    * but what the heck is this really about??: */
 160   #define IO_6A_PAUSE_PLAYBACK_BIT8     0x0100
 161   /* bit 9; sure, this _pauses_ playback (later resumes at same spot!),
 162    * but what the heck is this really about??: */
 163   #define IO_6A_PAUSE_PLAYBACK_BIT9     0x0200
 164         /* BIT8 and BIT9 are _NOT_ able to affect OPL3 MIDI playback,
 165          * thus it suggests influence on PCM only!!
 166          * However OTOH there seems to be no bit anywhere around here
 167          * which is able to disable OPL3... */
 168   /* bit 10: enabling this actually changes values at legacy gameport
 169    * I/O address (0x200); is this enabling of the Digital Enhanced Game Port???
 170    * Or maybe this simply switches off the NE558 circuit, since enabling this
 171    * still lets us evaluate button states, but not axis states */
 172   #define IO_6A_SOMETHING2_GAMEPORT      0x0400
 173         /* writing 0x0300: causes quite some crackling during
 174          * PC activity such as switching windows (PCI traffic??
 175          * --> FIFO/timing settings???) */
 176         /* writing 0x0100 plus/or 0x0200 inhibits playback */
 177         /* since the Windows .INF file has Flag_Enable_JoyStick and
 178          * Flag_Enable_SB_DOS_Emulation directly together, it stands to reason
 179          * that some other bit in this same register might be responsible
 180          * for SB DOS Emulation activation (note that the file did NOT define
 181          * a switch for OPL3!) */
 182 #define IDX_IO_6CH              0x6C    /* unknown; fully read-writable */
 183 #define IDX_IO_6EH              0x6E
 184         /* writing 0xffff returns 0x83fe (or 0x03fe only).
 185          * writing 0x83 (and only 0x83!!) to 0x6f will cause 0x6c to switch
 186          * from 0000 to ffff. */
 187
 188 /* further I/O indices not saved/restored and not readable after writing,
 189  * so probably not used */
 190
 191
 192 /*** Gameport area port indices ***/
 193 /* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */
 194 #define AZF_IO_SIZE_GAME                0x08
 195 #define AZF_IO_SIZE_GAME_PM             0x06
 196
 197 enum {
 198         AZF_GAME_LEGACY_IO_PORT = 0x200
 199 };
 200
 201 #define IDX_GAME_LEGACY_COMPATIBLE      0x00
 202         /* in some operation mode, writing anything to this port
 203          * triggers an interrupt:
 204          * yup, that's in case IDX_GAME_01H has one of the
 205          * axis measurement bits enabled
 206          * (and of course one needs to have GAME_HWCFG_IRQ_ENABLE, too) */
 207
 208 #define IDX_GAME_AXES_CONFIG            0x01
 209         /* NOTE: layout of this register awfully similar (read: "identical??")
 210          * to AD1815JS.pdf (p.29) */
 211
 212   /* enables axis 1 (X axis) measurement: */
 213   #define GAME_AXES_ENABLE_1            0x01
 214   /* enables axis 2 (Y axis) measurement: */
 215   #define GAME_AXES_ENABLE_2            0x02
 216   /* enables axis 3 (X axis) measurement: */
 217   #define GAME_AXES_ENABLE_3            0x04
 218   /* enables axis 4 (Y axis) measurement: */
 219   #define GAME_AXES_ENABLE_4            0x08
 220   /* selects the current axis to read the measured value of
 221    * (at IDX_GAME_AXIS_VALUE):
 222    * 00 = axis 1, 01 = axis 2, 10 = axis 3, 11 = axis 4: */
 223   #define GAME_AXES_READ_MASK           0x30
 224   /* enable to have the latch continuously accept ADC values
 225    * (and continuously cause interrupts in case interrupts are enabled);
 226    * AD1815JS.pdf says it's ~16ms interval there: */
 227   #define GAME_AXES_LATCH_ENABLE        0x40
 228   /* joystick data (measured axes) ready for reading: */
 229   #define GAME_AXES_SAMPLING_READY      0x80
 230
 231   /* NOTE: other card specs (SiS960 and others!) state that the
 232    * game position latches should be frozen when reading and be freed
 233    * (== reset?) after reading!!!
 234    * Freezing most likely means disabling 0x40 (GAME_AXES_LATCH_ENABLE),
 235    *  but how to free the value? */
 236   /* An internet search for "gameport latch ADC" should provide some insight
 237    * into how to program such a gameport system. */
 238
 239   /* writing 0xf0 to 01H once reset both counters to 0, in some special mode!?
 240    * yup, in case 6AH 0x20 is not enabled
 241    * (and 0x40 is sufficient, 0xf0 is not needed) */
 242
 243 #define IDX_GAME_AXIS_VALUE     0x02
 244         /* R: value of currently configured axis (word value!);
 245          * W: trigger axis measurement */
 246
 247 #define IDX_GAME_HWCONFIG       0x04
 248         /* note: bits 4 to 7 are never set (== 0) when reading!
 249          * --> reserved bits? */
 250   /* enables IRQ notification upon axes measurement ready: */
 251   #define GAME_HWCFG_IRQ_ENABLE                 0x01
 252   /* these bits choose a different frequency for the
 253    *  internal ADC counter increment.
 254    * hmm, seems to be a combo of bits:
 255    * 00 --> standard frequency
 256    * 10 --> 1/2
 257    * 01 --> 1/20
 258    * 11 --> 1/200: */
 259   #define GAME_HWCFG_ADC_COUNTER_FREQ_MASK      0x06
 260
 261   #define GAME_HWCFG_ADC_COUNTER_FREQ_STD       0
 262   #define GAME_HWCFG_ADC_COUNTER_FREQ_1_2       1
 263   #define GAME_HWCFG_ADC_COUNTER_FREQ_1_20      2
 264   #define GAME_HWCFG_ADC_COUNTER_FREQ_1_200     3
 265
 266   /* enable gameport legacy I/O address (0x200)
 267    * I was unable to locate any configurability for a different address: */
 268   #define GAME_HWCFG_LEGACY_ADDRESS_ENABLE      0x08
 269
 270 /*** MPU401 ***/
 271 #define AZF_IO_SIZE_MPU         0x04
 272 #define AZF_IO_SIZE_MPU_PM      0x04
 273
 274 /*** OPL3 synth ***/
 275 /* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */
 276 #define AZF_IO_SIZE_OPL3        0x08
 277 #define AZF_IO_SIZE_OPL3_PM     0x06
 278 /* hmm, given that a standard OPL3 has 4 registers only,
 279  * there might be some enhanced functionality lurking at the end
 280  * (especially since register 0x04 has a "non-empty" value 0xfe) */
 281
 282 /*** mixer I/O area port indices ***/
 283 /* (only 0x22 of 0x40 bytes saved/restored by Windows driver)
 284  * UNFORTUNATELY azf3328 is NOT truly AC97 compliant: see main file intro */
 285 #define AZF_IO_SIZE_MIXER       0x40
 286 #define AZF_IO_SIZE_MIXER_PM    0x22
 287
 288   #define MIXER_VOLUME_RIGHT_MASK       0x001f
 289   #define MIXER_VOLUME_LEFT_MASK        0x1f00
 290   #define MIXER_MUTE_MASK               0x8000
 291 #define IDX_MIXER_RESET         0x00 /* does NOT seem to have AC97 ID bits */
 292 #define IDX_MIXER_PLAY_MASTER   0x02
 293 #define IDX_MIXER_MODEMOUT      0x04
 294 #define IDX_MIXER_BASSTREBLE    0x06
 295   #define MIXER_BASSTREBLE_TREBLE_VOLUME_MASK   0x000e
 296   #define MIXER_BASSTREBLE_BASS_VOLUME_MASK     0x0e00
 297 #define IDX_MIXER_PCBEEP        0x08
 298 #define IDX_MIXER_MODEMIN       0x0a
 299 #define IDX_MIXER_MIC           0x0c
 300   #define MIXER_MIC_MICGAIN_20DB_ENHANCEMENT_MASK       0x0040
 301 #define IDX_MIXER_LINEIN        0x0e
 302 #define IDX_MIXER_CDAUDIO       0x10
 303 #define IDX_MIXER_VIDEO         0x12
 304 #define IDX_MIXER_AUX           0x14
 305 #define IDX_MIXER_WAVEOUT       0x16
 306 #define IDX_MIXER_FMSYNTH       0x18
 307 #define IDX_MIXER_REC_SELECT    0x1a
 308   #define MIXER_REC_SELECT_MIC          0x00
 309   #define MIXER_REC_SELECT_CD           0x01
 310   #define MIXER_REC_SELECT_VIDEO        0x02
 311   #define MIXER_REC_SELECT_AUX          0x03
 312   #define MIXER_REC_SELECT_LINEIN       0x04
 313   #define MIXER_REC_SELECT_MIXSTEREO    0x05
 314   #define MIXER_REC_SELECT_MIXMONO      0x06
 315   #define MIXER_REC_SELECT_MONOIN       0x07
 316 #define IDX_MIXER_REC_VOLUME    0x1c
 317 #define IDX_MIXER_ADVCTL1       0x1e
 318   /* unlisted bits are unmodifiable */
 319   #define MIXER_ADVCTL1_3DWIDTH_MASK    0x000e
 320   #define MIXER_ADVCTL1_HIFI3D_MASK     0x0300 /* yup, this is missing the high bit that official AC97 contains, plus it doesn't have linear bit value range behaviour but instead acts weirdly (possibly we're dealing with two *different* 3D settings here??) */
 321 #define IDX_MIXER_ADVCTL2       0x20 /* subset of AC97_GENERAL_PURPOSE reg! */
 322   /* unlisted bits are unmodifiable */
 323   #define MIXER_ADVCTL2_LPBK            0x0080 /* Loopback mode -- Win driver: "WaveOut3DBypass"? mutes WaveOut at LineOut */
 324   #define MIXER_ADVCTL2_MS              0x0100 /* Mic Select 0=Mic1, 1=Mic2 -- Win driver: "ModemOutSelect"?? */
 325   #define MIXER_ADVCTL2_MIX             0x0200 /* Mono output select 0=Mix, 1=Mic; Win driver: "MonoSelectSource"?? */
 326   #define MIXER_ADVCTL2_3D              0x2000 /* 3D Enhancement 1=on */
 327   #define MIXER_ADVCTL2_POP             0x8000 /* Pcm Out Path, 0=pre 3D, 1=post 3D */
 328
 329 #define IDX_MIXER_SOMETHING30H  0x30 /* used, but unknown??? */
 330
 331 /* driver internal flags */
 332 #define SET_CHAN_LEFT   1
 333 #define SET_CHAN_RIGHT  2
 334
 335 /* helper macro to align I/O port ranges to 32bit I/O width */
 336 #define AZF_ALIGN(x) (((x) + 3) & (~3))
 337
 338 #endif /* __SOUND_AZT3328_H  */