release/src-rt-6.x.4708/linux/linux-2.6.36/net/tipc/core.h

   1 /*
   2  * net/tipc/core.h: Include file for TIPC global declarations
   3  *
   4  * Copyright (c) 2005-2006, Ericsson AB
   5  * Copyright (c) 2005-2007, Wind River Systems
   6  * All rights reserved.
   7  *
   8  * Redistribution and use in source and binary forms, with or without
   9  * modification, are permitted provided that the following conditions are met:
  10  *
  11  * 1. Redistributions of source code must retain the above copyright
  12  *    notice, this list of conditions and the following disclaimer.
  13  * 2. Redistributions in binary form must reproduce the above copyright
  14  *    notice, this list of conditions and the following disclaimer in the
  15  *    documentation and/or other materials provided with the distribution.
  16  * 3. Neither the names of the copyright holders nor the names of its
  17  *    contributors may be used to endorse or promote products derived from
  18  *    this software without specific prior written permission.
  19  *
  20  * Alternatively, this software may be distributed under the terms of the
  21  * GNU General Public License ("GPL") version 2 as published by the Free
  22  * Software Foundation.
  23  *
  24  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  25  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  26  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  27  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  28  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  29  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  30  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  31  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  32  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  33  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  34  * POSSIBILITY OF SUCH DAMAGE.
  35  */
  36
  37 #ifndef _TIPC_CORE_H
  38 #define _TIPC_CORE_H
  39
  40 #include <linux/tipc.h>
  41 #include <linux/tipc_config.h>
  42 #include <net/tipc/tipc_msg.h>
  43 #include <net/tipc/tipc_port.h>
  44 #include <net/tipc/tipc_bearer.h>
  45 #include <net/tipc/tipc.h>
  46 #include <linux/types.h>
  47 #include <linux/kernel.h>
  48 #include <linux/errno.h>
  49 #include <linux/mm.h>
  50 #include <linux/timer.h>
  51 #include <linux/string.h>
  52 #include <asm/uaccess.h>
  53 #include <linux/interrupt.h>
  54 #include <asm/atomic.h>
  55 #include <asm/hardirq.h>
  56 #include <linux/netdevice.h>
  57 #include <linux/in.h>
  58 #include <linux/list.h>
  59 #include <linux/slab.h>
  60 #include <linux/vmalloc.h>
  61
  62
  63 #define TIPC_MOD_VER "2.0.0"
  64
  65 /*
  66  * TIPC sanity test macros
  67  */
  68
  69 #define assert(i)  BUG_ON(!(i))
  70
  71 /*
  72  * TIPC system monitoring code
  73  */
  74
  75 /*
  76  * TIPC's print buffer subsystem supports the following print buffers:
  77  *
  78  * TIPC_NULL : null buffer (i.e. print nowhere)
  79  * TIPC_CONS : system console
  80  * TIPC_LOG  : TIPC log buffer
  81  * &buf      : user-defined buffer (struct print_buf *)
  82  *
  83  * Note: TIPC_LOG is configured to echo its output to the system console;
  84  *       user-defined buffers can be configured to do the same thing.
  85  */
  86
  87 extern struct print_buf *const TIPC_NULL;
  88 extern struct print_buf *const TIPC_CONS;
  89 extern struct print_buf *const TIPC_LOG;
  90
  91 void tipc_printf(struct print_buf *, const char *fmt, ...);
  92
  93 /*
  94  * TIPC_OUTPUT is the destination print buffer for system messages.
  95  */
  96
  97 #ifndef TIPC_OUTPUT
  98 #define TIPC_OUTPUT TIPC_LOG
  99 #endif
 100
 101 /*
 102  * TIPC can be configured to send system messages to TIPC_OUTPUT
 103  * or to the system console only.
 104  */
 105
 106 #ifdef CONFIG_TIPC_DEBUG
 107
 108 #define err(fmt, arg...)  tipc_printf(TIPC_OUTPUT, \
 109                                         KERN_ERR "TIPC: " fmt, ## arg)
 110 #define warn(fmt, arg...) tipc_printf(TIPC_OUTPUT, \
 111                                         KERN_WARNING "TIPC: " fmt, ## arg)
 112 #define info(fmt, arg...) tipc_printf(TIPC_OUTPUT, \
 113                                         KERN_NOTICE "TIPC: " fmt, ## arg)
 114
 115 #else
 116
 117 #define err(fmt, arg...)  printk(KERN_ERR "TIPC: " fmt , ## arg)
 118 #define info(fmt, arg...) printk(KERN_INFO "TIPC: " fmt , ## arg)
 119 #define warn(fmt, arg...) printk(KERN_WARNING "TIPC: " fmt , ## arg)
 120
 121 #endif
 122
 123 /*
 124  * DBG_OUTPUT is the destination print buffer for debug messages.
 125  * It defaults to the the null print buffer, but can be redefined
 126  * (typically in the individual .c files being debugged) to allow
 127  * selected debug messages to be generated where needed.
 128  */
 129
 130 #ifndef DBG_OUTPUT
 131 #define DBG_OUTPUT TIPC_NULL
 132 #endif
 133
 134 /*
 135  * TIPC can be configured to send debug messages to the specified print buffer
 136  * (typically DBG_OUTPUT) or to suppress them entirely.
 137  */
 138
 139 #ifdef CONFIG_TIPC_DEBUG
 140
 141 #define dbg(fmt, arg...)  \
 142         do { \
 143                 if (DBG_OUTPUT != TIPC_NULL) \
 144                         tipc_printf(DBG_OUTPUT, fmt, ## arg); \
 145         } while (0)
 146 #define msg_dbg(msg, txt) \
 147         do { \
 148                 if (DBG_OUTPUT != TIPC_NULL) \
 149                         tipc_msg_dbg(DBG_OUTPUT, msg, txt); \
 150         } while (0)
 151 #define dump(fmt, arg...) \
 152         do { \
 153                 if (DBG_OUTPUT != TIPC_NULL) \
 154                         tipc_dump_dbg(DBG_OUTPUT, fmt, ##arg); \
 155         } while (0)
 156
 157 void tipc_msg_dbg(struct print_buf *, struct tipc_msg *, const char *);
 158 void tipc_dump_dbg(struct print_buf *, const char *fmt, ...);
 159
 160 #else
 161
 162 #define dbg(fmt, arg...)        do {} while (0)
 163 #define msg_dbg(msg, txt)       do {} while (0)
 164 #define dump(fmt, arg...)       do {} while (0)
 165
 166 #define tipc_msg_dbg(...)       do {} while (0)
 167 #define tipc_dump_dbg(...)      do {} while (0)
 168
 169 #endif
 170
 171
 172 /*
 173  * TIPC-specific error codes
 174  */
 175
 176 #define ELINKCONG EAGAIN        /* link congestion <=> resource unavailable */
 177
 178 /*
 179  * Global configuration variables
 180  */
 181
 182 extern u32 tipc_own_addr;
 183 extern int tipc_max_zones;
 184 extern int tipc_max_clusters;
 185 extern int tipc_max_nodes;
 186 extern int tipc_max_slaves;
 187 extern int tipc_max_ports;
 188 extern int tipc_max_subscriptions;
 189 extern int tipc_max_publications;
 190 extern int tipc_net_id;
 191 extern int tipc_remote_management;
 192
 193 /*
 194  * Other global variables
 195  */
 196
 197 extern int tipc_mode;
 198 extern int tipc_random;
 199 extern const char tipc_alphabet[];
 200 extern atomic_t tipc_user_count;
 201
 202
 203 /*
 204  * Routines available to privileged subsystems
 205  */
 206
 207 extern int  tipc_core_start(void);
 208 extern void tipc_core_stop(void);
 209 extern int  tipc_core_start_net(unsigned long addr);
 210 extern void tipc_core_stop_net(void);
 211 extern int  tipc_handler_start(void);
 212 extern void tipc_handler_stop(void);
 213 extern int  tipc_netlink_start(void);
 214 extern void tipc_netlink_stop(void);
 215 extern int  tipc_socket_init(void);
 216 extern void tipc_socket_stop(void);
 217
 218 static inline int delimit(int val, int min, int max)
 219 {
 220         if (val > max)
 221                 return max;
 222         if (val < min)
 223                 return min;
 224         return val;
 225 }
 226
 227
 228 /*
 229  * TIPC timer and signal code
 230  */
 231
 232 typedef void (*Handler) (unsigned long);
 233
 234 u32 tipc_k_signal(Handler routine, unsigned long argument);
 235
 236 /**
 237  * k_init_timer - initialize a timer
 238  * @timer: pointer to timer structure
 239  * @routine: pointer to routine to invoke when timer expires
 240  * @argument: value to pass to routine when timer expires
 241  *
 242  * Timer must be initialized before use (and terminated when no longer needed).
 243  */
 244
 245 static inline void k_init_timer(struct timer_list *timer, Handler routine,
 246                                 unsigned long argument)
 247 {
 248         dbg("initializing timer %p\n", timer);
 249         setup_timer(timer, routine, argument);
 250 }
 251
 252 /**
 253  * k_start_timer - start a timer
 254  * @timer: pointer to timer structure
 255  * @msec: time to delay (in ms)
 256  *
 257  * Schedules a previously initialized timer for later execution.
 258  * If timer is already running, the new timeout overrides the previous request.
 259  *
 260  * To ensure the timer doesn't expire before the specified delay elapses,
 261  * the amount of delay is rounded up when converting to the jiffies
 262  * then an additional jiffy is added to account for the fact that
 263  * the starting time may be in the middle of the current jiffy.
 264  */
 265
 266 static inline void k_start_timer(struct timer_list *timer, unsigned long msec)
 267 {
 268         dbg("starting timer %p for %u\n", timer, msec);
 269         mod_timer(timer, jiffies + msecs_to_jiffies(msec) + 1);
 270 }
 271
 272 /**
 273  * k_cancel_timer - cancel a timer
 274  * @timer: pointer to timer structure
 275  *
 276  * Cancels a previously initialized timer.
 277  * Can be called safely even if the timer is already inactive.
 278  *
 279  * WARNING: Must not be called when holding locks required by the timer's
 280  *          timeout routine, otherwise deadlock can occur on SMP systems!
 281  */
 282
 283 static inline void k_cancel_timer(struct timer_list *timer)
 284 {
 285         dbg("cancelling timer %p\n", timer);
 286         del_timer_sync(timer);
 287 }
 288
 289 /**
 290  * k_term_timer - terminate a timer
 291  * @timer: pointer to timer structure
 292  *
 293  * Prevents further use of a previously initialized timer.
 294  *
 295  * WARNING: Caller must ensure timer isn't currently running.
 296  *
 297  * (Do not "enhance" this routine to automatically cancel an active timer,
 298  * otherwise deadlock can arise when a timeout routine calls k_term_timer.)
 299  */
 300
 301 static inline void k_term_timer(struct timer_list *timer)
 302 {
 303         dbg("terminating timer %p\n", timer);
 304 }
 305
 306
 307 /*
 308  * TIPC message buffer code
 309  *
 310  * TIPC message buffer headroom reserves space for the worst-case
 311  * link-level device header (in case the message is sent off-node).
 312  *
 313  * Note: Headroom should be a multiple of 4 to ensure the TIPC header fields
 314  *       are word aligned for quicker access
 315  */
 316
 317 #define BUF_HEADROOM LL_MAX_HEADER
 318
 319 struct tipc_skb_cb {
 320         void *handle;
 321 };
 322
 323 #define TIPC_SKB_CB(__skb) ((struct tipc_skb_cb *)&((__skb)->cb[0]))
 324
 325
 326 static inline struct tipc_msg *buf_msg(struct sk_buff *skb)
 327 {
 328         return (struct tipc_msg *)skb->data;
 329 }
 330
 331 extern struct sk_buff *buf_acquire(u32 size);
 332
 333 /**
 334  * buf_discard - frees a TIPC message buffer
 335  * @skb: message buffer
 336  *
 337  * Frees a message buffer.  If passed NULL, just returns.
 338  */
 339
 340 static inline void buf_discard(struct sk_buff *skb)
 341 {
 342         kfree_skb(skb);
 343 }
 344
 345 /**
 346  * buf_linearize - convert a TIPC message buffer into a single contiguous piece
 347  * @skb: message buffer
 348  *
 349  * Returns 0 on success.
 350  */
 351
 352 static inline int buf_linearize(struct sk_buff *skb)
 353 {
 354         return skb_linearize(skb);
 355 }
 356
 357 #endif