release/src-rt-6.x.4708/linux/linux-2.6.36/include/sound/opl3.h

   1 #ifndef __SOUND_OPL3_H
   2 #define __SOUND_OPL3_H
   3
   4 /*
   5  * Definitions of the OPL-3 registers.
   6  *
   7  * Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
   8  *                  Hannu Savolainen 1993-1996
   9  *
  10  *
  11  *      The OPL-3 mode is switched on by writing 0x01, to the offset 5
  12  *      of the right side.
  13  *
  14  *      Another special register at the right side is at offset 4. It contains
  15  *      a bit mask defining which voices are used as 4 OP voices.
  16  *
  17  *      The percussive mode is implemented in the left side only.
  18  *
  19  *      With the above exceptions the both sides can be operated independently.
  20  *
  21  *      A 4 OP voice can be created by setting the corresponding
  22  *      bit at offset 4 of the right side.
  23  *
  24  *      For example setting the rightmost bit (0x01) changes the
  25  *      first voice on the right side to the 4 OP mode. The fourth
  26  *      voice is made inaccessible.
  27  *
  28  *      If a voice is set to the 2 OP mode, it works like 2 OP modes
  29  *      of the original YM3812 (AdLib). In addition the voice can
  30  *      be connected the left, right or both stereo channels. It can
  31  *      even be left unconnected. This works with 4 OP voices also.
  32  *
  33  *      The stereo connection bits are located in the FEEDBACK_CONNECTION
  34  *      register of the voice (0xC0-0xC8). In 4 OP voices these bits are
  35  *      in the second half of the voice.
  36  *
  37  *
  38  *   This program is free software; you can redistribute it and/or modify
  39  *   it under the terms of the GNU General Public License as published by
  40  *   the Free Software Foundation; either version 2 of the License, or
  41  *   (at your option) any later version.
  42  *
  43  *   This program is distributed in the hope that it will be useful,
  44  *   but WITHOUT ANY WARRANTY; without even the implied warranty of
  45  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  46  *   GNU General Public License for more details.
  47  *
  48  *   You should have received a copy of the GNU General Public License
  49  *   along with this program; if not, write to the Free Software
  50  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  51  *
  52  */
  53
  54 #include <sound/core.h>
  55 #include <sound/hwdep.h>
  56 #include <sound/timer.h>
  57 #include <sound/seq_midi_emul.h>
  58 #ifdef CONFIG_SND_SEQUENCER_OSS
  59 #include <sound/seq_oss.h>
  60 #include <sound/seq_oss_legacy.h>
  61 #endif
  62 #include <sound/seq_device.h>
  63 #include <sound/asound_fm.h>
  64
  65 /*
  66  *    Register numbers for the global registers
  67  */
  68
  69 #define OPL3_REG_TEST                   0x01
  70 #define   OPL3_ENABLE_WAVE_SELECT       0x20
  71
  72 #define OPL3_REG_TIMER1                 0x02
  73 #define OPL3_REG_TIMER2                 0x03
  74 #define OPL3_REG_TIMER_CONTROL          0x04    /* Left side */
  75 #define   OPL3_IRQ_RESET                0x80
  76 #define   OPL3_TIMER1_MASK              0x40
  77 #define   OPL3_TIMER2_MASK              0x20
  78 #define   OPL3_TIMER1_START             0x01
  79 #define   OPL3_TIMER2_START             0x02
  80
  81 #define OPL3_REG_CONNECTION_SELECT      0x04    /* Right side */
  82 #define   OPL3_LEFT_4OP_0               0x01
  83 #define   OPL3_LEFT_4OP_1               0x02
  84 #define   OPL3_LEFT_4OP_2               0x04
  85 #define   OPL3_RIGHT_4OP_0              0x08
  86 #define   OPL3_RIGHT_4OP_1              0x10
  87 #define   OPL3_RIGHT_4OP_2              0x20
  88
  89 #define OPL3_REG_MODE                   0x05    /* Right side */
  90 #define   OPL3_OPL3_ENABLE              0x01    /* OPL3 mode */
  91 #define   OPL3_OPL4_ENABLE              0x02    /* OPL4 mode */
  92
  93 #define OPL3_REG_KBD_SPLIT              0x08    /* Left side */
  94 #define   OPL3_COMPOSITE_SINE_WAVE_MODE 0x80    /* Don't use with OPL-3? */
  95 #define   OPL3_KEYBOARD_SPLIT           0x40
  96
  97 #define OPL3_REG_PERCUSSION             0xbd    /* Left side only */
  98 #define   OPL3_TREMOLO_DEPTH            0x80
  99 #define   OPL3_VIBRATO_DEPTH            0x40
 100 #define   OPL3_PERCUSSION_ENABLE        0x20
 101 #define   OPL3_BASSDRUM_ON              0x10
 102 #define   OPL3_SNAREDRUM_ON             0x08
 103 #define   OPL3_TOMTOM_ON                0x04
 104 #define   OPL3_CYMBAL_ON                0x02
 105 #define   OPL3_HIHAT_ON                 0x01
 106
 107 /*
 108  *    Offsets to the register banks for operators. To get the
 109  *      register number just add the operator offset to the bank offset
 110  *
 111  *      AM/VIB/EG/KSR/Multiple (0x20 to 0x35)
 112  */
 113 #define OPL3_REG_AM_VIB                 0x20
 114 #define   OPL3_TREMOLO_ON               0x80
 115 #define   OPL3_VIBRATO_ON               0x40
 116 #define   OPL3_SUSTAIN_ON               0x20
 117 #define   OPL3_KSR                      0x10    /* Key scaling rate */
 118 #define   OPL3_MULTIPLE_MASK            0x0f    /* Frequency multiplier */
 119
 120  /*
 121   *   KSL/Total level (0x40 to 0x55)
 122   */
 123 #define OPL3_REG_KSL_LEVEL              0x40
 124 #define   OPL3_KSL_MASK                 0xc0    /* Envelope scaling bits */
 125 #define   OPL3_TOTAL_LEVEL_MASK         0x3f    /* Strength (volume) of OP */
 126
 127 /*
 128  *    Attack / Decay rate (0x60 to 0x75)
 129  */
 130 #define OPL3_REG_ATTACK_DECAY           0x60
 131 #define   OPL3_ATTACK_MASK              0xf0
 132 #define   OPL3_DECAY_MASK               0x0f
 133
 134 /*
 135  * Sustain level / Release rate (0x80 to 0x95)
 136  */
 137 #define OPL3_REG_SUSTAIN_RELEASE        0x80
 138 #define   OPL3_SUSTAIN_MASK             0xf0
 139 #define   OPL3_RELEASE_MASK             0x0f
 140
 141 /*
 142  * Wave select (0xE0 to 0xF5)
 143  */
 144 #define OPL3_REG_WAVE_SELECT            0xe0
 145 #define   OPL3_WAVE_SELECT_MASK         0x07
 146
 147 /*
 148  *    Offsets to the register banks for voices. Just add to the
 149  *      voice number to get the register number.
 150  *
 151  *      F-Number low bits (0xA0 to 0xA8).
 152  */
 153 #define OPL3_REG_FNUM_LOW               0xa0
 154
 155 /*
 156  *    F-number high bits / Key on / Block (octave) (0xB0 to 0xB8)
 157  */
 158 #define OPL3_REG_KEYON_BLOCK            0xb0
 159 #define   OPL3_KEYON_BIT                0x20
 160 #define   OPL3_BLOCKNUM_MASK            0x1c
 161 #define   OPL3_FNUM_HIGH_MASK           0x03
 162
 163 /*
 164  *    Feedback / Connection (0xc0 to 0xc8)
 165  *
 166  *      These registers have two new bits when the OPL-3 mode
 167  *      is selected. These bits controls connecting the voice
 168  *      to the stereo channels. For 4 OP voices this bit is
 169  *      defined in the second half of the voice (add 3 to the
 170  *      register offset).
 171  *
 172  *      For 4 OP voices the connection bit is used in the
 173  *      both halves (gives 4 ways to connect the operators).
 174  */
 175 #define OPL3_REG_FEEDBACK_CONNECTION    0xc0
 176 #define   OPL3_FEEDBACK_MASK            0x0e    /* Valid just for 1st OP of a voice */
 177 #define   OPL3_CONNECTION_BIT           0x01
 178 /*
 179  *    In the 4 OP mode there is four possible configurations how the
 180  *      operators can be connected together (in 2 OP modes there is just
 181  *      AM or FM). The 4 OP connection mode is defined by the rightmost
 182  *      bit of the FEEDBACK_CONNECTION (0xC0-0xC8) on the both halves.
 183  *
 184  *      First half      Second half     Mode
 185  *
 186  *                                       +---+
 187  *                                       v   |
 188  *      0               0               >+-1-+--2--3--4-->
 189  *
 190  *
 191  *
 192  *                                       +---+
 193  *                                       |   |
 194  *      0               1               >+-1-+--2-+
 195  *                                                |->
 196  *                                      >--3----4-+
 197  *
 198  *                                       +---+
 199  *                                       |   |
 200  *      1               0               >+-1-+-----+
 201  *                                                 |->
 202  *                                      >--2--3--4-+
 203  *
 204  *                                       +---+
 205  *                                       |   |
 206  *      1               1               >+-1-+--+
 207  *                                              |
 208  *                                      >--2--3-+->
 209  *                                              |
 210  *                                      >--4----+
 211  */
 212 #define   OPL3_STEREO_BITS              0x30    /* OPL-3 only */
 213 #define     OPL3_VOICE_TO_LEFT          0x10
 214 #define     OPL3_VOICE_TO_RIGHT         0x20
 215
 216 /*
 217
 218  */
 219
 220 #define OPL3_LEFT               0x0000
 221 #define OPL3_RIGHT              0x0100
 222
 223 #define OPL3_HW_AUTO            0x0000
 224 #define OPL3_HW_OPL2            0x0200
 225 #define OPL3_HW_OPL3            0x0300
 226 #define OPL3_HW_OPL3_SV         0x0301  /* S3 SonicVibes */
 227 #define OPL3_HW_OPL3_CS         0x0302  /* CS4232/CS4236+ */
 228 #define OPL3_HW_OPL3_FM801      0x0303  /* FM801 */
 229 #define OPL3_HW_OPL3_CS4281     0x0304  /* CS4281 */
 230 #define OPL3_HW_OPL4            0x0400  /* YMF278B/YMF295 */
 231 #define OPL3_HW_OPL4_ML         0x0401  /* YMF704/YMF721 */
 232 #define OPL3_HW_MASK            0xff00
 233
 234 #define MAX_OPL2_VOICES         9
 235 #define MAX_OPL3_VOICES         18
 236
 237 struct snd_opl3;
 238
 239 /*
 240  * Instrument record, aka "Patch"
 241  */
 242
 243 /* FM operator */
 244 struct fm_operator {
 245         unsigned char am_vib;
 246         unsigned char ksl_level;
 247         unsigned char attack_decay;
 248         unsigned char sustain_release;
 249         unsigned char wave_select;
 250 } __attribute__((packed));
 251
 252 /* Instrument data */
 253 struct fm_instrument {
 254         struct fm_operator op[4];
 255         unsigned char feedback_connection[2];
 256         unsigned char echo_delay;
 257         unsigned char echo_atten;
 258         unsigned char chorus_spread;
 259         unsigned char trnsps;
 260         unsigned char fix_dur;
 261         unsigned char modes;
 262         unsigned char fix_key;
 263 };
 264
 265 /* type */
 266 #define FM_PATCH_OPL2   0x01            /* OPL2 2 operators FM instrument */
 267 #define FM_PATCH_OPL3   0x02            /* OPL3 4 operators FM instrument */
 268
 269 /* Instrument record */
 270 struct fm_patch {
 271         unsigned char prog;
 272         unsigned char bank;
 273         unsigned char type;
 274         struct fm_instrument inst;
 275         char name[24];
 276         struct fm_patch *next;
 277 };
 278
 279
 280 /*
 281  * A structure to keep track of each hardware voice
 282  */
 283 struct snd_opl3_voice {
 284         int  state;             /* status */
 285 #define SNDRV_OPL3_ST_OFF               0       /* Not playing */
 286 #define SNDRV_OPL3_ST_ON_2OP    1       /* 2op voice is allocated */
 287 #define SNDRV_OPL3_ST_ON_4OP    2       /* 4op voice is allocated */
 288 #define SNDRV_OPL3_ST_NOT_AVAIL -1      /* voice is not available */
 289
 290         unsigned int time;      /* An allocation time */
 291         unsigned char note;     /* Note currently assigned to this voice */
 292
 293         unsigned long note_off; /* note-off time */
 294         int note_off_check;     /* check note-off time */
 295
 296         unsigned char keyon_reg;        /* KON register shadow */
 297
 298         struct snd_midi_channel *chan;  /* Midi channel for this note */
 299 };
 300
 301 struct snd_opl3 {
 302         unsigned long l_port;
 303         unsigned long r_port;
 304         struct resource *res_l_port;
 305         struct resource *res_r_port;
 306         unsigned short hardware;
 307         /* hardware access */
 308         void (*command) (struct snd_opl3 * opl3, unsigned short cmd, unsigned char val);
 309         unsigned short timer_enable;
 310         int seq_dev_num;        /* sequencer device number */
 311         struct snd_timer *timer1;
 312         struct snd_timer *timer2;
 313         spinlock_t timer_lock;
 314
 315         void *private_data;
 316         void (*private_free)(struct snd_opl3 *);
 317
 318         struct snd_hwdep *hwdep;
 319         spinlock_t reg_lock;
 320         struct snd_card *card;          /* The card that this belongs to */
 321         unsigned char fm_mode;          /* OPL mode, see SNDRV_DM_FM_MODE_XXX */
 322         unsigned char rhythm;           /* percussion mode flag */
 323         unsigned char max_voices;       /* max number of voices */
 324 #if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
 325 #define SNDRV_OPL3_MODE_SYNTH 0         /* OSS - voices allocated by application */
 326 #define SNDRV_OPL3_MODE_SEQ 1           /* ALSA - driver handles voice allocation */
 327         int synth_mode;                 /* synth mode */
 328         int seq_client;
 329
 330         struct snd_seq_device *seq_dev; /* sequencer device */
 331         struct snd_midi_channel_set * chset;
 332
 333 #ifdef CONFIG_SND_SEQUENCER_OSS
 334         struct snd_seq_device *oss_seq_dev;     /* OSS sequencer device */
 335         struct snd_midi_channel_set * oss_chset;
 336 #endif
 337
 338 #define OPL3_PATCH_HASH_SIZE    32
 339         struct fm_patch *patch_table[OPL3_PATCH_HASH_SIZE];
 340
 341         struct snd_opl3_voice voices[MAX_OPL3_VOICES]; /* Voices (OPL3 'channel') */
 342         int use_time;                   /* allocation counter */
 343
 344         unsigned short connection_reg;  /* connection reg shadow */
 345         unsigned char drum_reg;         /* percussion reg shadow */
 346
 347         spinlock_t voice_lock;          /* Lock for voice access */
 348
 349         struct timer_list tlist;        /* timer for note-offs and effects */
 350         int sys_timer_status;           /* system timer run status */
 351         spinlock_t sys_timer_lock;      /* Lock for system timer access */
 352 #endif
 353 };
 354
 355 /* opl3.c */
 356 void snd_opl3_interrupt(struct snd_hwdep * hw);
 357 int snd_opl3_new(struct snd_card *card, unsigned short hardware,
 358                  struct snd_opl3 **ropl3);
 359 int snd_opl3_init(struct snd_opl3 *opl3);
 360 int snd_opl3_create(struct snd_card *card,
 361                     unsigned long l_port, unsigned long r_port,
 362                     unsigned short hardware,
 363                     int integrated,
 364                     struct snd_opl3 ** opl3);
 365 int snd_opl3_timer_new(struct snd_opl3 * opl3, int timer1_dev, int timer2_dev);
 366 int snd_opl3_hwdep_new(struct snd_opl3 * opl3, int device, int seq_device,
 367                        struct snd_hwdep ** rhwdep);
 368
 369 /* opl3_synth */
 370 int snd_opl3_open(struct snd_hwdep * hw, struct file *file);
 371 int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file,
 372                    unsigned int cmd, unsigned long arg);
 373 int snd_opl3_release(struct snd_hwdep * hw, struct file *file);
 374
 375 void snd_opl3_reset(struct snd_opl3 * opl3);
 376
 377 #if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
 378 long snd_opl3_write(struct snd_hwdep *hw, const char __user *buf, long count,
 379                     loff_t *offset);
 380 int snd_opl3_load_patch(struct snd_opl3 *opl3,
 381                         int prog, int bank, int type,
 382                         const char *name,
 383                         const unsigned char *ext,
 384                         const unsigned char *data);
 385 struct fm_patch *snd_opl3_find_patch(struct snd_opl3 *opl3, int prog, int bank,
 386                                      int create_patch);
 387 void snd_opl3_clear_patches(struct snd_opl3 *opl3);
 388 #else
 389 #define snd_opl3_write  NULL
 390 static inline void snd_opl3_clear_patches(struct snd_opl3 *opl3) {}
 391 #endif
 392
 393 #endif /* __SOUND_OPL3_H */