release/src-rt-6.x.4708/linux/linux-2.6.36/include/scsi/fc/fc_fcp.h

   1 /*
   2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms and conditions of the GNU General Public License,
   6  * version 2, as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope it will be useful, but WITHOUT
   9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  11  * more details.
  12  *
  13  * You should have received a copy of the GNU General Public License along with
  14  * this program; if not, write to the Free Software Foundation, Inc.,
  15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  16  *
  17  * Maintained at www.Open-FCoE.org
  18  */
  19
  20 #ifndef _FC_FCP_H_
  21 #define _FC_FCP_H_
  22
  23 /*
  24  * Fibre Channel Protocol for SCSI.
  25  * From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005.
  26  */
  27
  28 /*
  29  * fc/fs.h defines FC_TYPE_FCP.
  30  */
  31
  32 /*
  33  * Service parameter page parameters (word 3 bits) for Process Login.
  34  */
  35 #define FCP_SPPF_TASK_RETRY_ID  0x0200  /* task retry ID requested */
  36 #define FCP_SPPF_RETRY          0x0100  /* retry supported */
  37 #define FCP_SPPF_CONF_COMPL     0x0080  /* confirmed completion allowed */
  38 #define FCP_SPPF_OVLY_ALLOW     0x0040  /* data overlay allowed */
  39 #define FCP_SPPF_INIT_FCN       0x0020  /* initiator function */
  40 #define FCP_SPPF_TARG_FCN       0x0010  /* target function */
  41 #define FCP_SPPF_RD_XRDY_DIS    0x0002  /* disable XFER_RDY for reads */
  42 #define FCP_SPPF_WR_XRDY_DIS    0x0001  /* disable XFER_RDY for writes */
  43
  44 /*
  45  * FCP_CMND IU Payload.
  46  */
  47 struct fcp_cmnd {
  48         __u8            fc_lun[8];      /* logical unit number */
  49         __u8            fc_cmdref;      /* commmand reference number */
  50         __u8            fc_pri_ta;      /* priority and task attribute */
  51         __u8            fc_tm_flags;    /* task management flags */
  52         __u8            fc_flags;       /* additional len & flags */
  53         __u8            fc_cdb[16];     /* base CDB */
  54         __be32          fc_dl;          /* data length (must follow fc_cdb) */
  55 };
  56
  57 #define FCP_CMND_LEN    32      /* expected length of structure */
  58
  59 struct fcp_cmnd32 {
  60         __u8            fc_lun[8];      /* logical unit number */
  61         __u8            fc_cmdref;      /* commmand reference number */
  62         __u8            fc_pri_ta;      /* priority and task attribute */
  63         __u8            fc_tm_flags;    /* task management flags */
  64         __u8            fc_flags;       /* additional len & flags */
  65         __u8            fc_cdb[32];     /* base CDB */
  66         __be32          fc_dl;          /* data length (must follow fc_cdb) */
  67 };
  68
  69 #define FCP_CMND32_LEN      48  /* expected length of structure */
  70 #define FCP_CMND32_ADD_LEN  (16 / 4)    /* Additional cdb length */
  71
  72 /*
  73  * fc_pri_ta.
  74  */
  75 #define FCP_PTA_SIMPLE      0   /* simple task attribute */
  76 #define FCP_PTA_HEADQ       1   /* head of queue task attribute */
  77 #define FCP_PTA_ORDERED     2   /* ordered task attribute */
  78 #define FCP_PTA_ACA         4   /* auto. contigent allegiance */
  79 #define FCP_PTA_MASK        7   /* mask for task attribute field */
  80 #define FCP_PRI_SHIFT       3   /* priority field starts in bit 3 */
  81 #define FCP_PRI_RESVD_MASK  0x80        /* reserved bits in priority field */
  82
  83 /*
  84  * fc_tm_flags - task management flags field.
  85  */
  86 #define FCP_TMF_CLR_ACA         0x40    /* clear ACA condition */
  87 #define FCP_TMF_TGT_RESET       0x20    /* target reset task management,
  88                                            deprecated as of FCP-3 */
  89 #define FCP_TMF_LUN_RESET       0x10    /* logical unit reset task management */
  90 #define FCP_TMF_CLR_TASK_SET    0x04    /* clear task set */
  91 #define FCP_TMF_ABT_TASK_SET    0x02    /* abort task set */
  92
  93 /*
  94  * fc_flags.
  95  *  Bits 7:2 are the additional FCP_CDB length / 4.
  96  */
  97 #define FCP_CFL_LEN_MASK        0xfc    /* mask for additional length */
  98 #define FCP_CFL_LEN_SHIFT       2       /* shift bits for additional length */
  99 #define FCP_CFL_RDDATA          0x02    /* read data */
 100 #define FCP_CFL_WRDATA          0x01    /* write data */
 101
 102 /*
 103  * FCP_TXRDY IU - transfer ready payload.
 104  */
 105 struct fcp_txrdy {
 106         __be32          ft_data_ro;     /* data relative offset */
 107         __be32          ft_burst_len;   /* burst length */
 108         __u8            _ft_resvd[4];   /* reserved */
 109 };
 110
 111 #define FCP_TXRDY_LEN   12      /* expected length of structure */
 112
 113 /*
 114  * FCP_RESP IU - response payload.
 115  *
 116  * The response payload comes in three parts: the flags/status, the
 117  * sense/response lengths and the sense data/response info section.
 118  *
 119  * From FCP3r04, note 6 of section 9.5.13:
 120  *
 121  * Some early implementations presented the FCP_RSP IU without the FCP_RESID,
 122  * FCP_SNS_LEN, and FCP_RSP_LEN fields if the FCP_RESID_UNDER, FCP_RESID_OVER,
 123  * FCP_SNS_LEN_VALID, and FCP_RSP_LEN_VALID bits were all set to zero. This
 124  * non-standard behavior should be tolerated.
 125  *
 126  * All response frames will always contain the fcp_resp template.  Some
 127  * will also include the fcp_resp_len template.
 128  */
 129 struct fcp_resp {
 130         __u8            _fr_resvd[8];   /* reserved */
 131         __be16          fr_retry_delay; /* retry delay timer */
 132         __u8            fr_flags;       /* flags */
 133         __u8            fr_status;      /* SCSI status code */
 134 };
 135
 136 #define FCP_RESP_LEN    12      /* expected length of structure */
 137
 138 struct fcp_resp_ext {
 139         __be32          fr_resid;       /* Residual value */
 140         __be32          fr_sns_len;     /* SCSI Sense length */
 141         __be32          fr_rsp_len;     /* Response Info length */
 142
 143         /*
 144          * Optionally followed by RSP info and/or SNS info and/or
 145          * bidirectional read residual length, if any.
 146          */
 147 };
 148
 149 #define FCP_RESP_EXT_LEN    12  /* expected length of the structure */
 150
 151 struct fcp_resp_rsp_info {
 152     __u8      _fr_resvd[3];       /* reserved */
 153     __u8      rsp_code;           /* Response Info Code */
 154     __u8      _fr_resvd2[4];      /* reserved */
 155 };
 156
 157 struct fcp_resp_with_ext {
 158         struct fcp_resp resp;
 159         struct fcp_resp_ext ext;
 160 };
 161
 162 #define FCP_RESP_WITH_EXT   (FCP_RESP_LEN + FCP_RESP_EXT_LEN)
 163
 164 /*
 165  * fr_flags.
 166  */
 167 #define FCP_BIDI_RSP        0x80        /* bidirectional read response */
 168 #define FCP_BIDI_READ_UNDER 0x40        /* bidir. read less than requested */
 169 #define FCP_BIDI_READ_OVER  0x20        /* DL insufficient for full transfer */
 170 #define FCP_CONF_REQ        0x10        /* confirmation requested */
 171 #define FCP_RESID_UNDER     0x08        /* transfer shorter than expected */
 172 #define FCP_RESID_OVER      0x04        /* DL insufficient for full transfer */
 173 #define FCP_SNS_LEN_VAL     0x02        /* SNS_LEN field is valid */
 174 #define FCP_RSP_LEN_VAL     0x01        /* RSP_LEN field is valid */
 175
 176 /*
 177  * rsp_codes
 178  */
 179 enum fcp_resp_rsp_codes {
 180         FCP_TMF_CMPL = 0,
 181         FCP_DATA_LEN_INVALID = 1,
 182         FCP_CMND_FIELDS_INVALID = 2,
 183         FCP_DATA_PARAM_MISMATCH = 3,
 184         FCP_TMF_REJECTED = 4,
 185         FCP_TMF_FAILED = 5,
 186         FCP_TMF_INVALID_LUN = 9,
 187 };
 188
 189 /*
 190  * FCP SRR Link Service request - Sequence Retransmission Request.
 191  */
 192 struct fcp_srr {
 193         __u8            srr_op;         /* opcode ELS_SRR */
 194         __u8            srr_resvd[3];   /* opcode / reserved - must be zero */
 195         __be16          srr_ox_id;      /* OX_ID of failed command */
 196         __be16          srr_rx_id;      /* RX_ID of failed command */
 197         __be32          srr_rel_off;    /* relative offset */
 198         __u8            srr_r_ctl;      /* r_ctl for the information unit */
 199         __u8            srr_resvd2[3];  /* reserved */
 200 };
 201
 202 /*
 203  * Feature bits in name server FC-4 Features object.
 204  */
 205 #define FCP_FEAT_TARG   (1 << 0)        /* target function supported */
 206 #define FCP_FEAT_INIT   (1 << 1)        /* initiator function supported */
 207
 208 #endif /* _FC_FCP_H_ */