release/src-rt-6.x.4708/linux/linux-2.6.36/include/linux/usb/langwell_udc.h

   1 /*
   2  * Intel Langwell USB Device Controller driver
   3  * Copyright (C) 2008-2009, Intel Corporation.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms and conditions of the GNU General Public License,
   7  * version 2, as published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  17  *
  18  */
  19
  20 #ifndef __LANGWELL_UDC_H
  21 #define __LANGWELL_UDC_H
  22
  23
  24 /* MACRO defines */
  25 #define CAP_REG_OFFSET          0x0
  26 #define OP_REG_OFFSET           0x28
  27
  28 #define DMA_ADDR_INVALID        (~(dma_addr_t)0)
  29
  30 #define DQH_ALIGNMENT           2048
  31 #define DTD_ALIGNMENT           64
  32 #define DMA_BOUNDARY            4096
  33
  34 #define EP0_MAX_PKT_SIZE        64
  35 #define EP_DIR_IN               1
  36 #define EP_DIR_OUT              0
  37
  38 #define FLUSH_TIMEOUT           1000
  39 #define RESET_TIMEOUT           1000
  40 #define SETUPSTAT_TIMEOUT       100
  41 #define PRIME_TIMEOUT           100
  42
  43
  44 /* device memory space registers */
  45
  46 /* Capability Registers, BAR0 + CAP_REG_OFFSET */
  47 struct langwell_cap_regs {
  48         /* offset: 0x0 */
  49         u8      caplength;      /* offset of Operational Register */
  50         u8      _reserved3;
  51         u16     hciversion;     /* H: BCD encoding of host version */
  52         u32     hcsparams;      /* H: host port steering logic capability */
  53         u32     hccparams;      /* H: host multiple mode control capability */
  54 #define HCC_LEN BIT(17)         /* Link power management (LPM) capability */
  55         u8      _reserved4[0x20-0xc];
  56         /* offset: 0x20 */
  57         u16     dciversion;     /* BCD encoding of device version */
  58         u8      _reserved5[0x24-0x22];
  59         u32     dccparams;      /* overall device controller capability */
  60 #define HOSTCAP BIT(8)          /* host capable */
  61 #define DEVCAP  BIT(7)          /* device capable */
  62 #define DEN(d)  \
  63         (((d)>>0)&0x1f)         /* bits 4:0, device endpoint number */
  64 } __attribute__ ((packed));
  65
  66
  67 /* Operational Registers, BAR0 + OP_REG_OFFSET */
  68 struct langwell_op_regs {
  69         /* offset: 0x28 */
  70         u32     extsts;
  71 #define EXTS_TI1        BIT(4)  /* general purpose timer interrupt 1 */
  72 #define EXTS_TI1TI0     BIT(3)  /* general purpose timer interrupt 0 */
  73 #define EXTS_TI1UPI     BIT(2)  /* USB host periodic interrupt */
  74 #define EXTS_TI1UAI     BIT(1)  /* USB host asynchronous interrupt */
  75 #define EXTS_TI1NAKI    BIT(0)  /* NAK interrupt */
  76         u32     extintr;
  77 #define EXTI_TIE1       BIT(4)  /* general purpose timer interrupt enable 1 */
  78 #define EXTI_TIE0       BIT(3)  /* general purpose timer interrupt enable 0 */
  79 #define EXTI_UPIE       BIT(2)  /* USB host periodic interrupt enable */
  80 #define EXTI_UAIE       BIT(1)  /* USB host asynchronous interrupt enable */
  81 #define EXTI_NAKE       BIT(0)  /* NAK interrupt enable */
  82         /* offset: 0x30 */
  83         u32     usbcmd;
  84 #define CMD_HIRD(u)     \
  85         (((u)>>24)&0xf)         /* bits 27:24, host init resume duration */
  86 #define CMD_ITC(u)      \
  87         (((u)>>16)&0xff)        /* bits 23:16, interrupt threshold control */
  88 #define CMD_PPE         BIT(15) /* per-port change events enable */
  89 #define CMD_ATDTW       BIT(14) /* add dTD tripwire */
  90 #define CMD_SUTW        BIT(13) /* setup tripwire */
  91 #define CMD_ASPE        BIT(11) /* asynchronous schedule park mode enable */
  92 #define CMD_FS2         BIT(10) /* frame list size */
  93 #define CMD_ASP1        BIT(9)  /* asynchronous schedule park mode count */
  94 #define CMD_ASP0        BIT(8)
  95 #define CMD_LR          BIT(7)  /* light host/device controller reset */
  96 #define CMD_IAA         BIT(6)  /* interrupt on async advance doorbell */
  97 #define CMD_ASE         BIT(5)  /* asynchronous schedule enable */
  98 #define CMD_PSE         BIT(4)  /* periodic schedule enable */
  99 #define CMD_FS1         BIT(3)
 100 #define CMD_FS0         BIT(2)
 101 #define CMD_RST         BIT(1)  /* controller reset */
 102 #define CMD_RUNSTOP     BIT(0)  /* run/stop */
 103         u32     usbsts;
 104 #define STS_PPCI(u)     \
 105         (((u)>>16)&0xffff)      /* bits 31:16, port-n change detect */
 106 #define STS_AS          BIT(15) /* asynchronous schedule status */
 107 #define STS_PS          BIT(14) /* periodic schedule status */
 108 #define STS_RCL         BIT(13) /* reclamation */
 109 #define STS_HCH         BIT(12) /* HC halted */
 110 #define STS_ULPII       BIT(10) /* ULPI interrupt */
 111 #define STS_SLI         BIT(8)  /* DC suspend */
 112 #define STS_SRI         BIT(7)  /* SOF received */
 113 #define STS_URI         BIT(6)  /* USB reset received */
 114 #define STS_AAI         BIT(5)  /* interrupt on async advance */
 115 #define STS_SEI         BIT(4)  /* system error */
 116 #define STS_FRI         BIT(3)  /* frame list rollover */
 117 #define STS_PCI         BIT(2)  /* port change detect */
 118 #define STS_UEI         BIT(1)  /* USB error interrupt */
 119 #define STS_UI          BIT(0)  /* USB interrupt */
 120         u32     usbintr;
 121 /* bits 31:16, per-port interrupt enable */
 122 #define INTR_PPCE(u)    (((u)>>16)&0xffff)
 123 #define INTR_ULPIE      BIT(10) /* ULPI enable */
 124 #define INTR_SLE        BIT(8)  /* DC sleep/suspend enable */
 125 #define INTR_SRE        BIT(7)  /* SOF received enable */
 126 #define INTR_URE        BIT(6)  /* USB reset enable */
 127 #define INTR_AAE        BIT(5)  /* interrupt on async advance enable */
 128 #define INTR_SEE        BIT(4)  /* system error enable */
 129 #define INTR_FRE        BIT(3)  /* frame list rollover enable */
 130 #define INTR_PCE        BIT(2)  /* port change detect enable */
 131 #define INTR_UEE        BIT(1)  /* USB error interrupt enable */
 132 #define INTR_UE         BIT(0)  /* USB interrupt enable */
 133         u32     frindex;        /* frame index */
 134 #define FRINDEX_MASK    (0x3fff << 0)
 135         u32     ctrldssegment;  /* not used */
 136         u32     deviceaddr;
 137 #define USBADR_SHIFT    25
 138 #define USBADR(d)       \
 139         (((d)>>25)&0x7f)        /* bits 31:25, device address */
 140 #define USBADR_MASK     (0x7f << 25)
 141 #define USBADRA         BIT(24) /* device address advance */
 142         u32     endpointlistaddr;/* endpoint list top memory address */
 143 /* bits 31:11, endpoint list pointer */
 144 #define EPBASE(d)       (((d)>>11)&0x1fffff)
 145 #define ENDPOINTLISTADDR_MASK   (0x1fffff << 11)
 146         u32     ttctrl;         /* H: TT operatin, not used */
 147         /* offset: 0x50 */
 148         u32     burstsize;      /* burst size of data movement */
 149 #define TXPBURST(b)     \
 150         (((b)>>8)&0xff)         /* bits 15:8, TX burst length */
 151 #define RXPBURST(b)     \
 152         (((b)>>0)&0xff)         /* bits 7:0, RX burst length */
 153         u32     txfilltuning;   /* TX tuning */
 154         u32     txttfilltuning; /* H: TX TT tuning */
 155         u32     ic_usb;         /* control the IC_USB FS/LS transceiver */
 156         /* offset: 0x60 */
 157         u32     ulpi_viewport;  /* indirect access to ULPI PHY */
 158 #define ULPIWU          BIT(31) /* ULPI wakeup */
 159 #define ULPIRUN         BIT(30) /* ULPI read/write run */
 160 #define ULPIRW          BIT(29) /* ULPI read/write control */
 161 #define ULPISS          BIT(27) /* ULPI sync state */
 162 #define ULPIPORT(u)     \
 163         (((u)>>24)&7)           /* bits 26:24, ULPI port number */
 164 #define ULPIADDR(u)     \
 165         (((u)>>16)&0xff)        /* bits 23:16, ULPI data address */
 166 #define ULPIDATRD(u)    \
 167         (((u)>>8)&0xff)         /* bits 15:8, ULPI data read */
 168 #define ULPIDATWR(u)    \
 169         (((u)>>0)&0xff)         /* bits 7:0, ULPI date write */
 170         u8      _reserved6[0x70-0x64];
 171         /* offset: 0x70 */
 172         u32     configflag;     /* H: not used */
 173         u32     portsc1;        /* port status */
 174 #define DA(p)   \
 175         (((p)>>25)&0x7f)        /* bits 31:25, device address */
 176 #define PORTS_SSTS      (BIT(24) | BIT(23))     /* suspend status */
 177 #define PORTS_WKOC      BIT(22) /* wake on over-current enable */
 178 #define PORTS_WKDS      BIT(21) /* wake on disconnect enable */
 179 #define PORTS_WKCN      BIT(20) /* wake on connect enable */
 180 #define PORTS_PTC(p)    (((p)>>16)&0xf) /* bits 19:16, port test control */
 181 #define PORTS_PIC       (BIT(15) | BIT(14))     /* port indicator control */
 182 #define PORTS_PO        BIT(13) /* port owner */
 183 #define PORTS_PP        BIT(12) /* port power */
 184 #define PORTS_LS        (BIT(11) | BIT(10))     /* line status */
 185 #define PORTS_SLP       BIT(9)  /* suspend using L1 */
 186 #define PORTS_PR        BIT(8)  /* port reset */
 187 #define PORTS_SUSP      BIT(7)  /* suspend */
 188 #define PORTS_FPR       BIT(6)  /* force port resume */
 189 #define PORTS_OCC       BIT(5)  /* over-current change */
 190 #define PORTS_OCA       BIT(4)  /* over-current active */
 191 #define PORTS_PEC       BIT(3)  /* port enable/disable change */
 192 #define PORTS_PE        BIT(2)  /* port enable/disable */
 193 #define PORTS_CSC       BIT(1)  /* connect status change */
 194 #define PORTS_CCS       BIT(0)  /* current connect status */
 195         u8      _reserved7[0xb4-0x78];
 196         /* offset: 0xb4 */
 197         u32     devlc;          /* control LPM and each USB port behavior */
 198 /* bits 31:29, parallel transceiver select */
 199 #define LPM_PTS(d)      (((d)>>29)&7)
 200 #define LPM_STS         BIT(28) /* serial transceiver select */
 201 #define LPM_PTW         BIT(27) /* parallel transceiver width */
 202 #define LPM_PSPD(d)     (((d)>>25)&3)   /* bits 26:25, port speed */
 203 #define LPM_PSPD_MASK   (BIT(26) | BIT(25))
 204 #define LPM_SPEED_FULL  0
 205 #define LPM_SPEED_LOW   1
 206 #define LPM_SPEED_HIGH  2
 207 #define LPM_SRT         BIT(24) /* shorten reset time */
 208 #define LPM_PFSC        BIT(23) /* port force full speed connect */
 209 #define LPM_PHCD        BIT(22) /* PHY low power suspend clock disable */
 210 #define LPM_STL         BIT(16) /* STALL reply to LPM token */
 211 #define LPM_BA(d)       \
 212         (((d)>>1)&0x7ff)        /* bits 11:1, BmAttributes */
 213 #define LPM_NYT_ACK     BIT(0)  /* NYET/ACK reply to LPM token */
 214         u8      _reserved8[0xf4-0xb8];
 215         /* offset: 0xf4 */
 216         u32     otgsc;          /* On-The-Go status and control */
 217 #define OTGSC_DPIE      BIT(30) /* data pulse interrupt enable */
 218 #define OTGSC_MSE       BIT(29) /* 1 ms timer interrupt enable */
 219 #define OTGSC_BSEIE     BIT(28) /* B session end interrupt enable */
 220 #define OTGSC_BSVIE     BIT(27) /* B session valid interrupt enable */
 221 #define OTGSC_ASVIE     BIT(26) /* A session valid interrupt enable */
 222 #define OTGSC_AVVIE     BIT(25) /* A VBUS valid interrupt enable */
 223 #define OTGSC_IDIE      BIT(24) /* USB ID interrupt enable */
 224 #define OTGSC_DPIS      BIT(22) /* data pulse interrupt status */
 225 #define OTGSC_MSS       BIT(21) /* 1 ms timer interrupt status */
 226 #define OTGSC_BSEIS     BIT(20) /* B session end interrupt status */
 227 #define OTGSC_BSVIS     BIT(19) /* B session valid interrupt status */
 228 #define OTGSC_ASVIS     BIT(18) /* A session valid interrupt status */
 229 #define OTGSC_AVVIS     BIT(17) /* A VBUS valid interrupt status */
 230 #define OTGSC_IDIS      BIT(16) /* USB ID interrupt status */
 231 #define OTGSC_DPS       BIT(14) /* data bus pulsing status */
 232 #define OTGSC_MST       BIT(13) /* 1 ms timer toggle */
 233 #define OTGSC_BSE       BIT(12) /* B session end */
 234 #define OTGSC_BSV       BIT(11) /* B session valid */
 235 #define OTGSC_ASV       BIT(10) /* A session valid */
 236 #define OTGSC_AVV       BIT(9)  /* A VBUS valid */
 237 #define OTGSC_USBID     BIT(8)  /* USB ID */
 238 #define OTGSC_HABA      BIT(7)  /* hw assist B-disconnect to A-connect */
 239 #define OTGSC_HADP      BIT(6)  /* hw assist data pulse */
 240 #define OTGSC_IDPU      BIT(5)  /* ID pullup */
 241 #define OTGSC_DP        BIT(4)  /* data pulsing */
 242 #define OTGSC_OT        BIT(3)  /* OTG termination */
 243 #define OTGSC_HAAR      BIT(2)  /* hw assist auto reset */
 244 #define OTGSC_VC        BIT(1)  /* VBUS charge */
 245 #define OTGSC_VD        BIT(0)  /* VBUS discharge */
 246         u32     usbmode;
 247 #define MODE_VBPS       BIT(5)  /* R/W VBUS power select */
 248 #define MODE_SDIS       BIT(4)  /* R/W stream disable mode */
 249 #define MODE_SLOM       BIT(3)  /* R/W setup lockout mode */
 250 #define MODE_ENSE       BIT(2)  /* endian select */
 251 #define MODE_CM(u)      (((u)>>0)&3)    /* bits 1:0, controller mode */
 252 #define MODE_IDLE       0
 253 #define MODE_DEVICE     2
 254 #define MODE_HOST       3
 255         u8      _reserved9[0x100-0xfc];
 256         /* offset: 0x100 */
 257         u32     endptnak;
 258 #define EPTN(e)         \
 259         (((e)>>16)&0xffff)      /* bits 31:16, TX endpoint NAK */
 260 #define EPRN(e)         \
 261         (((e)>>0)&0xffff)       /* bits 15:0, RX endpoint NAK */
 262         u32     endptnaken;
 263 #define EPTNE(e)        \
 264         (((e)>>16)&0xffff)      /* bits 31:16, TX endpoint NAK enable */
 265 #define EPRNE(e)        \
 266         (((e)>>0)&0xffff)       /* bits 15:0, RX endpoint NAK enable */
 267         u32     endptsetupstat;
 268 #define SETUPSTAT_MASK          (0xffff << 0)   /* bits 15:0 */
 269 #define EP0SETUPSTAT_MASK       1
 270         u32     endptprime;
 271 /* bits 31:16, prime endpoint transmit buffer */
 272 #define PETB(e)         (((e)>>16)&0xffff)
 273 /* bits 15:0, prime endpoint receive buffer */
 274 #define PERB(e)         (((e)>>0)&0xffff)
 275         /* offset: 0x110 */
 276         u32     endptflush;
 277 /* bits 31:16, flush endpoint transmit buffer */
 278 #define FETB(e)         (((e)>>16)&0xffff)
 279 /* bits 15:0, flush endpoint receive buffer */
 280 #define FERB(e)         (((e)>>0)&0xffff)
 281         u32     endptstat;
 282 /* bits 31:16, endpoint transmit buffer ready */
 283 #define ETBR(e)         (((e)>>16)&0xffff)
 284 /* bits 15:0, endpoint receive buffer ready */
 285 #define ERBR(e)         (((e)>>0)&0xffff)
 286         u32     endptcomplete;
 287 /* bits 31:16, endpoint transmit complete event */
 288 #define ETCE(e)         (((e)>>16)&0xffff)
 289 /* bits 15:0, endpoint receive complete event */
 290 #define ERCE(e)         (((e)>>0)&0xffff)
 291         /* offset: 0x11c */
 292         u32     endptctrl[16];
 293 #define EPCTRL_TXE      BIT(23) /* TX endpoint enable */
 294 #define EPCTRL_TXR      BIT(22) /* TX data toggle reset */
 295 #define EPCTRL_TXI      BIT(21) /* TX data toggle inhibit */
 296 #define EPCTRL_TXT(e)   (((e)>>18)&3)   /* bits 19:18, TX endpoint type */
 297 #define EPCTRL_TXT_SHIFT        18
 298 #define EPCTRL_TXD      BIT(17) /* TX endpoint data source */
 299 #define EPCTRL_TXS      BIT(16) /* TX endpoint STALL */
 300 #define EPCTRL_RXE      BIT(7)  /* RX endpoint enable */
 301 #define EPCTRL_RXR      BIT(6)  /* RX data toggle reset */
 302 #define EPCTRL_RXI      BIT(5)  /* RX data toggle inhibit */
 303 #define EPCTRL_RXT(e)   (((e)>>2)&3)    /* bits 3:2, RX endpoint type */
 304 #define EPCTRL_RXT_SHIFT        2       /* bits 19:18, TX endpoint type */
 305 #define EPCTRL_RXD      BIT(1)  /* RX endpoint data sink */
 306 #define EPCTRL_RXS      BIT(0)  /* RX endpoint STALL */
 307 } __attribute__ ((packed));
 308
 309 #endif /* __LANGWELL_UDC_H */