2 * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
4 * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License version
8 * 2 as published by the Free Software Foundation.
10 * Support to set flow control line levels using TIOCMGET and TIOCMSET
11 * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
12 * control thanks to Munir Nassar nassarmu@real-time.com
16 #include <linux/kernel.h>
17 #include <linux/errno.h>
18 #include <linux/slab.h>
19 #include <linux/tty.h>
20 #include <linux/tty_flip.h>
21 #include <linux/module.h>
22 #include <linux/moduleparam.h>
23 #include <linux/usb.h>
24 #include <linux/uaccess.h>
25 #include <linux/usb/serial.h>
30 #define DRIVER_VERSION "v0.09"
31 #define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
36 static int cp210x_open(struct tty_struct
*tty
, struct usb_serial_port
*);
37 static void cp210x_close(struct usb_serial_port
*);
38 static void cp210x_get_termios(struct tty_struct
*,
39 struct usb_serial_port
*port
);
40 static void cp210x_get_termios_port(struct usb_serial_port
*port
,
41 unsigned int *cflagp
, unsigned int *baudp
);
42 static void cp210x_set_termios(struct tty_struct
*, struct usb_serial_port
*,
44 static int cp210x_tiocmget(struct tty_struct
*, struct file
*);
45 static int cp210x_tiocmset(struct tty_struct
*, struct file
*,
46 unsigned int, unsigned int);
47 static int cp210x_tiocmset_port(struct usb_serial_port
*port
, struct file
*,
48 unsigned int, unsigned int);
49 static void cp210x_break_ctl(struct tty_struct
*, int);
50 static int cp210x_startup(struct usb_serial
*);
51 static void cp210x_dtr_rts(struct usb_serial_port
*p
, int on
);
55 static const struct usb_device_id id_table
[] = {
56 { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
57 { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
58 { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
59 { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
60 { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
61 { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
62 { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
63 { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
64 { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
65 { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
66 { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
67 { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
68 { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
69 { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
70 { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
71 { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
72 { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
73 { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
74 { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
75 { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
76 { USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
77 { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
78 { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
79 { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
80 { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
81 { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
82 { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
83 { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
84 { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
85 { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
86 { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
87 { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
88 { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
89 { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
90 { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
91 { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
92 { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
93 { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
94 { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
95 { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
96 { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
97 { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
98 { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
99 { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
100 { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
101 { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
102 { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
103 { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
104 { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
105 { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
106 { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */
107 { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
108 { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
109 { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
110 { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
111 { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
112 { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
113 { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
114 { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
115 { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
116 { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
117 { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
118 { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
119 { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
120 { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
121 { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
122 { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
123 { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
124 { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
125 { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
126 { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
127 { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
128 { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
129 { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
130 { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
131 { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
132 { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
133 { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
134 { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
135 { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
136 { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
137 { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
138 { } /* Terminating Entry */
141 MODULE_DEVICE_TABLE(usb
, id_table
);
143 static struct usb_driver cp210x_driver
= {
145 .probe
= usb_serial_probe
,
146 .disconnect
= usb_serial_disconnect
,
147 .id_table
= id_table
,
151 static struct usb_serial_driver cp210x_device
= {
153 .owner
= THIS_MODULE
,
156 .usb_driver
= &cp210x_driver
,
157 .id_table
= id_table
,
160 .bulk_out_size
= 256,
162 .close
= cp210x_close
,
163 .break_ctl
= cp210x_break_ctl
,
164 .set_termios
= cp210x_set_termios
,
165 .tiocmget
= cp210x_tiocmget
,
166 .tiocmset
= cp210x_tiocmset
,
167 .attach
= cp210x_startup
,
168 .dtr_rts
= cp210x_dtr_rts
171 /* Config request types */
172 #define REQTYPE_HOST_TO_DEVICE 0x41
173 #define REQTYPE_DEVICE_TO_HOST 0xc1
175 /* Config request codes */
176 #define CP210X_IFC_ENABLE 0x00
177 #define CP210X_SET_BAUDDIV 0x01
178 #define CP210X_GET_BAUDDIV 0x02
179 #define CP210X_SET_LINE_CTL 0x03
180 #define CP210X_GET_LINE_CTL 0x04
181 #define CP210X_SET_BREAK 0x05
182 #define CP210X_IMM_CHAR 0x06
183 #define CP210X_SET_MHS 0x07
184 #define CP210X_GET_MDMSTS 0x08
185 #define CP210X_SET_XON 0x09
186 #define CP210X_SET_XOFF 0x0A
187 #define CP210X_SET_EVENTMASK 0x0B
188 #define CP210X_GET_EVENTMASK 0x0C
189 #define CP210X_SET_CHAR 0x0D
190 #define CP210X_GET_CHARS 0x0E
191 #define CP210X_GET_PROPS 0x0F
192 #define CP210X_GET_COMM_STATUS 0x10
193 #define CP210X_RESET 0x11
194 #define CP210X_PURGE 0x12
195 #define CP210X_SET_FLOW 0x13
196 #define CP210X_GET_FLOW 0x14
197 #define CP210X_EMBED_EVENTS 0x15
198 #define CP210X_GET_EVENTSTATE 0x16
199 #define CP210X_SET_CHARS 0x19
201 /* CP210X_IFC_ENABLE */
202 #define UART_ENABLE 0x0001
203 #define UART_DISABLE 0x0000
205 /* CP210X_(SET|GET)_BAUDDIV */
206 #define BAUD_RATE_GEN_FREQ 0x384000
208 /* CP210X_(SET|GET)_LINE_CTL */
209 #define BITS_DATA_MASK 0X0f00
210 #define BITS_DATA_5 0X0500
211 #define BITS_DATA_6 0X0600
212 #define BITS_DATA_7 0X0700
213 #define BITS_DATA_8 0X0800
214 #define BITS_DATA_9 0X0900
216 #define BITS_PARITY_MASK 0x00f0
217 #define BITS_PARITY_NONE 0x0000
218 #define BITS_PARITY_ODD 0x0010
219 #define BITS_PARITY_EVEN 0x0020
220 #define BITS_PARITY_MARK 0x0030
221 #define BITS_PARITY_SPACE 0x0040
223 #define BITS_STOP_MASK 0x000f
224 #define BITS_STOP_1 0x0000
225 #define BITS_STOP_1_5 0x0001
226 #define BITS_STOP_2 0x0002
228 /* CP210X_SET_BREAK */
229 #define BREAK_ON 0x0001
230 #define BREAK_OFF 0x0000
232 /* CP210X_(SET_MHS|GET_MDMSTS) */
233 #define CONTROL_DTR 0x0001
234 #define CONTROL_RTS 0x0002
235 #define CONTROL_CTS 0x0010
236 #define CONTROL_DSR 0x0020
237 #define CONTROL_RING 0x0040
238 #define CONTROL_DCD 0x0080
239 #define CONTROL_WRITE_DTR 0x0100
240 #define CONTROL_WRITE_RTS 0x0200
244 * Reads from the CP210x configuration registers
245 * 'size' is specified in bytes.
246 * 'data' is a pointer to a pre-allocated array of integers large
247 * enough to hold 'size' bytes (with 4 bytes to each integer)
249 static int cp210x_get_config(struct usb_serial_port
*port
, u8 request
,
250 unsigned int *data
, int size
)
252 struct usb_serial
*serial
= port
->serial
;
254 int result
, i
, length
;
256 /* Number of integers required to contain the array */
257 length
= (((size
- 1) | 3) + 1)/4;
259 buf
= kcalloc(length
, sizeof(__le32
), GFP_KERNEL
);
261 dev_err(&port
->dev
, "%s - out of memory.\n", __func__
);
265 /* Issue the request, attempting to read 'size' bytes */
266 result
= usb_control_msg(serial
->dev
, usb_rcvctrlpipe(serial
->dev
, 0),
267 request
, REQTYPE_DEVICE_TO_HOST
, 0x0000,
270 /* Convert data into an array of integers */
271 for (i
= 0; i
< length
; i
++)
272 data
[i
] = le32_to_cpu(buf
[i
]);
276 if (result
!= size
) {
277 dbg("%s - Unable to send config request, "
278 "request=0x%x size=%d result=%d\n",
279 __func__
, request
, size
, result
);
288 * Writes to the CP210x configuration registers
289 * Values less than 16 bits wide are sent directly
290 * 'size' is specified in bytes.
292 static int cp210x_set_config(struct usb_serial_port
*port
, u8 request
,
293 unsigned int *data
, int size
)
295 struct usb_serial
*serial
= port
->serial
;
297 int result
, i
, length
;
299 /* Number of integers required to contain the array */
300 length
= (((size
- 1) | 3) + 1)/4;
302 buf
= kmalloc(length
* sizeof(__le32
), GFP_KERNEL
);
304 dev_err(&port
->dev
, "%s - out of memory.\n",
309 /* Array of integers into bytes */
310 for (i
= 0; i
< length
; i
++)
311 buf
[i
] = cpu_to_le32(data
[i
]);
314 result
= usb_control_msg(serial
->dev
,
315 usb_sndctrlpipe(serial
->dev
, 0),
316 request
, REQTYPE_HOST_TO_DEVICE
, 0x0000,
319 result
= usb_control_msg(serial
->dev
,
320 usb_sndctrlpipe(serial
->dev
, 0),
321 request
, REQTYPE_HOST_TO_DEVICE
, data
[0],
327 if ((size
> 2 && result
!= size
) || result
< 0) {
328 dbg("%s - Unable to send request, "
329 "request=0x%x size=%d result=%d\n",
330 __func__
, request
, size
, result
);
338 * cp210x_set_config_single
339 * Convenience function for calling cp210x_set_config on single data values
340 * without requiring an integer pointer
342 static inline int cp210x_set_config_single(struct usb_serial_port
*port
,
343 u8 request
, unsigned int data
)
345 return cp210x_set_config(port
, request
, &data
, 2);
349 * cp210x_quantise_baudrate
350 * Quantises the baud rate as per AN205 Table 1
352 static unsigned int cp210x_quantise_baudrate(unsigned int baud
) {
353 if (baud
<= 56) baud
= 0;
354 else if (baud
<= 300) baud
= 300;
355 else if (baud
<= 600) baud
= 600;
356 else if (baud
<= 1200) baud
= 1200;
357 else if (baud
<= 1800) baud
= 1800;
358 else if (baud
<= 2400) baud
= 2400;
359 else if (baud
<= 4000) baud
= 4000;
360 else if (baud
<= 4803) baud
= 4800;
361 else if (baud
<= 7207) baud
= 7200;
362 else if (baud
<= 9612) baud
= 9600;
363 else if (baud
<= 14428) baud
= 14400;
364 else if (baud
<= 16062) baud
= 16000;
365 else if (baud
<= 19250) baud
= 19200;
366 else if (baud
<= 28912) baud
= 28800;
367 else if (baud
<= 38601) baud
= 38400;
368 else if (baud
<= 51558) baud
= 51200;
369 else if (baud
<= 56280) baud
= 56000;
370 else if (baud
<= 58053) baud
= 57600;
371 else if (baud
<= 64111) baud
= 64000;
372 else if (baud
<= 77608) baud
= 76800;
373 else if (baud
<= 117028) baud
= 115200;
374 else if (baud
<= 129347) baud
= 128000;
375 else if (baud
<= 156868) baud
= 153600;
376 else if (baud
<= 237832) baud
= 230400;
377 else if (baud
<= 254234) baud
= 250000;
378 else if (baud
<= 273066) baud
= 256000;
379 else if (baud
<= 491520) baud
= 460800;
380 else if (baud
<= 567138) baud
= 500000;
381 else if (baud
<= 670254) baud
= 576000;
382 else if (baud
<= 1053257) baud
= 921600;
383 else if (baud
<= 1474560) baud
= 1228800;
384 else if (baud
<= 2457600) baud
= 1843200;
389 static int cp210x_open(struct tty_struct
*tty
, struct usb_serial_port
*port
)
393 dbg("%s - port %d", __func__
, port
->number
);
395 if (cp210x_set_config_single(port
, CP210X_IFC_ENABLE
, UART_ENABLE
)) {
396 dev_err(&port
->dev
, "%s - Unable to enable UART\n",
401 result
= usb_serial_generic_open(tty
, port
);
405 /* Configure the termios structure */
406 cp210x_get_termios(tty
, port
);
410 static void cp210x_close(struct usb_serial_port
*port
)
412 dbg("%s - port %d", __func__
, port
->number
);
414 usb_serial_generic_close(port
);
416 mutex_lock(&port
->serial
->disc_mutex
);
417 if (!port
->serial
->disconnected
)
418 cp210x_set_config_single(port
, CP210X_IFC_ENABLE
, UART_DISABLE
);
419 mutex_unlock(&port
->serial
->disc_mutex
);
424 * Reads the baud rate, data bits, parity, stop bits and flow control mode
425 * from the device, corrects any unsupported values, and configures the
426 * termios structure to reflect the state of the device
428 static void cp210x_get_termios(struct tty_struct
*tty
,
429 struct usb_serial_port
*port
)
434 cp210x_get_termios_port(tty
->driver_data
,
435 &tty
->termios
->c_cflag
, &baud
);
436 tty_encode_baud_rate(tty
, baud
, baud
);
442 cp210x_get_termios_port(port
, &cflag
, &baud
);
447 * cp210x_get_termios_port
448 * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
450 static void cp210x_get_termios_port(struct usb_serial_port
*port
,
451 unsigned int *cflagp
, unsigned int *baudp
)
453 unsigned int cflag
, modem_ctl
[4];
457 dbg("%s - port %d", __func__
, port
->number
);
459 cp210x_get_config(port
, CP210X_GET_BAUDDIV
, &baud
, 2);
460 /* Convert to baudrate */
462 baud
= cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ
+ baud
/2)/ baud
);
464 dbg("%s - baud rate = %d", __func__
, baud
);
469 cp210x_get_config(port
, CP210X_GET_LINE_CTL
, &bits
, 2);
471 switch (bits
& BITS_DATA_MASK
) {
473 dbg("%s - data bits = 5", __func__
);
477 dbg("%s - data bits = 6", __func__
);
481 dbg("%s - data bits = 7", __func__
);
485 dbg("%s - data bits = 8", __func__
);
489 dbg("%s - data bits = 9 (not supported, using 8 data bits)",
492 bits
&= ~BITS_DATA_MASK
;
494 cp210x_set_config(port
, CP210X_SET_LINE_CTL
, &bits
, 2);
497 dbg("%s - Unknown number of data bits, using 8", __func__
);
499 bits
&= ~BITS_DATA_MASK
;
501 cp210x_set_config(port
, CP210X_SET_LINE_CTL
, &bits
, 2);
505 switch (bits
& BITS_PARITY_MASK
) {
506 case BITS_PARITY_NONE
:
507 dbg("%s - parity = NONE", __func__
);
510 case BITS_PARITY_ODD
:
511 dbg("%s - parity = ODD", __func__
);
512 cflag
|= (PARENB
|PARODD
);
514 case BITS_PARITY_EVEN
:
515 dbg("%s - parity = EVEN", __func__
);
519 case BITS_PARITY_MARK
:
520 dbg("%s - parity = MARK (not supported, disabling parity)",
523 bits
&= ~BITS_PARITY_MASK
;
524 cp210x_set_config(port
, CP210X_SET_LINE_CTL
, &bits
, 2);
526 case BITS_PARITY_SPACE
:
527 dbg("%s - parity = SPACE (not supported, disabling parity)",
530 bits
&= ~BITS_PARITY_MASK
;
531 cp210x_set_config(port
, CP210X_SET_LINE_CTL
, &bits
, 2);
534 dbg("%s - Unknown parity mode, disabling parity", __func__
);
536 bits
&= ~BITS_PARITY_MASK
;
537 cp210x_set_config(port
, CP210X_SET_LINE_CTL
, &bits
, 2);
542 switch (bits
& BITS_STOP_MASK
) {
544 dbg("%s - stop bits = 1", __func__
);
547 dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)",
549 bits
&= ~BITS_STOP_MASK
;
550 cp210x_set_config(port
, CP210X_SET_LINE_CTL
, &bits
, 2);
553 dbg("%s - stop bits = 2", __func__
);
557 dbg("%s - Unknown number of stop bits, using 1 stop bit",
559 bits
&= ~BITS_STOP_MASK
;
560 cp210x_set_config(port
, CP210X_SET_LINE_CTL
, &bits
, 2);
564 cp210x_get_config(port
, CP210X_GET_FLOW
, modem_ctl
, 16);
565 if (modem_ctl
[0] & 0x0008) {
566 dbg("%s - flow control = CRTSCTS", __func__
);
569 dbg("%s - flow control = NONE", __func__
);
576 static void cp210x_set_termios(struct tty_struct
*tty
,
577 struct usb_serial_port
*port
, struct ktermios
*old_termios
)
579 unsigned int cflag
, old_cflag
;
580 unsigned int baud
= 0, bits
;
581 unsigned int modem_ctl
[4];
583 dbg("%s - port %d", __func__
, port
->number
);
588 tty
->termios
->c_cflag
&= ~CMSPAR
;
589 cflag
= tty
->termios
->c_cflag
;
590 old_cflag
= old_termios
->c_cflag
;
591 baud
= cp210x_quantise_baudrate(tty_get_baud_rate(tty
));
593 /* If the baud rate is to be updated*/
594 if (baud
!= tty_termios_baud_rate(old_termios
) && baud
!= 0) {
595 dbg("%s - Setting baud rate to %d baud", __func__
,
597 if (cp210x_set_config_single(port
, CP210X_SET_BAUDDIV
,
598 ((BAUD_RATE_GEN_FREQ
+ baud
/2) / baud
))) {
599 dbg("Baud rate requested not supported by device");
600 baud
= tty_termios_baud_rate(old_termios
);
603 /* Report back the resulting baud rate */
604 tty_encode_baud_rate(tty
, baud
, baud
);
606 /* If the number of data bits is to be updated */
607 if ((cflag
& CSIZE
) != (old_cflag
& CSIZE
)) {
608 cp210x_get_config(port
, CP210X_GET_LINE_CTL
, &bits
, 2);
609 bits
&= ~BITS_DATA_MASK
;
610 switch (cflag
& CSIZE
) {
613 dbg("%s - data bits = 5", __func__
);
617 dbg("%s - data bits = 6", __func__
);
621 dbg("%s - data bits = 7", __func__
);
625 dbg("%s - data bits = 8", __func__
);
629 dbg("%s - data bits = 9", __func__);
632 dbg("cp210x driver does not "
633 "support the number of bits requested,"
634 " using 8 bit mode\n");
638 if (cp210x_set_config(port
, CP210X_SET_LINE_CTL
, &bits
, 2))
639 dbg("Number of data bits requested "
640 "not supported by device\n");
643 if ((cflag
& (PARENB
|PARODD
)) != (old_cflag
& (PARENB
|PARODD
))) {
644 cp210x_get_config(port
, CP210X_GET_LINE_CTL
, &bits
, 2);
645 bits
&= ~BITS_PARITY_MASK
;
646 if (cflag
& PARENB
) {
647 if (cflag
& PARODD
) {
648 bits
|= BITS_PARITY_ODD
;
649 dbg("%s - parity = ODD", __func__
);
651 bits
|= BITS_PARITY_EVEN
;
652 dbg("%s - parity = EVEN", __func__
);
655 if (cp210x_set_config(port
, CP210X_SET_LINE_CTL
, &bits
, 2))
656 dbg("Parity mode not supported "
660 if ((cflag
& CSTOPB
) != (old_cflag
& CSTOPB
)) {
661 cp210x_get_config(port
, CP210X_GET_LINE_CTL
, &bits
, 2);
662 bits
&= ~BITS_STOP_MASK
;
663 if (cflag
& CSTOPB
) {
665 dbg("%s - stop bits = 2", __func__
);
668 dbg("%s - stop bits = 1", __func__
);
670 if (cp210x_set_config(port
, CP210X_SET_LINE_CTL
, &bits
, 2))
671 dbg("Number of stop bits requested "
672 "not supported by device\n");
675 if ((cflag
& CRTSCTS
) != (old_cflag
& CRTSCTS
)) {
676 cp210x_get_config(port
, CP210X_GET_FLOW
, modem_ctl
, 16);
677 dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
678 __func__
, modem_ctl
[0], modem_ctl
[1],
679 modem_ctl
[2], modem_ctl
[3]);
681 if (cflag
& CRTSCTS
) {
682 modem_ctl
[0] &= ~0x7B;
683 modem_ctl
[0] |= 0x09;
685 dbg("%s - flow control = CRTSCTS", __func__
);
687 modem_ctl
[0] &= ~0x7B;
688 modem_ctl
[0] |= 0x01;
689 modem_ctl
[1] |= 0x40;
690 dbg("%s - flow control = NONE", __func__
);
693 dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
694 __func__
, modem_ctl
[0], modem_ctl
[1],
695 modem_ctl
[2], modem_ctl
[3]);
696 cp210x_set_config(port
, CP210X_SET_FLOW
, modem_ctl
, 16);
701 static int cp210x_tiocmset (struct tty_struct
*tty
, struct file
*file
,
702 unsigned int set
, unsigned int clear
)
704 struct usb_serial_port
*port
= tty
->driver_data
;
705 return cp210x_tiocmset_port(port
, file
, set
, clear
);
708 static int cp210x_tiocmset_port(struct usb_serial_port
*port
, struct file
*file
,
709 unsigned int set
, unsigned int clear
)
711 unsigned int control
= 0;
713 dbg("%s - port %d", __func__
, port
->number
);
715 if (set
& TIOCM_RTS
) {
716 control
|= CONTROL_RTS
;
717 control
|= CONTROL_WRITE_RTS
;
719 if (set
& TIOCM_DTR
) {
720 control
|= CONTROL_DTR
;
721 control
|= CONTROL_WRITE_DTR
;
723 if (clear
& TIOCM_RTS
) {
724 control
&= ~CONTROL_RTS
;
725 control
|= CONTROL_WRITE_RTS
;
727 if (clear
& TIOCM_DTR
) {
728 control
&= ~CONTROL_DTR
;
729 control
|= CONTROL_WRITE_DTR
;
732 dbg("%s - control = 0x%.4x", __func__
, control
);
734 return cp210x_set_config(port
, CP210X_SET_MHS
, &control
, 2);
737 static void cp210x_dtr_rts(struct usb_serial_port
*p
, int on
)
740 cp210x_tiocmset_port(p
, NULL
, TIOCM_DTR
|TIOCM_RTS
, 0);
742 cp210x_tiocmset_port(p
, NULL
, 0, TIOCM_DTR
|TIOCM_RTS
);
745 static int cp210x_tiocmget (struct tty_struct
*tty
, struct file
*file
)
747 struct usb_serial_port
*port
= tty
->driver_data
;
748 unsigned int control
;
751 dbg("%s - port %d", __func__
, port
->number
);
753 cp210x_get_config(port
, CP210X_GET_MDMSTS
, &control
, 1);
755 result
= ((control
& CONTROL_DTR
) ? TIOCM_DTR
: 0)
756 |((control
& CONTROL_RTS
) ? TIOCM_RTS
: 0)
757 |((control
& CONTROL_CTS
) ? TIOCM_CTS
: 0)
758 |((control
& CONTROL_DSR
) ? TIOCM_DSR
: 0)
759 |((control
& CONTROL_RING
)? TIOCM_RI
: 0)
760 |((control
& CONTROL_DCD
) ? TIOCM_CD
: 0);
762 dbg("%s - control = 0x%.2x", __func__
, control
);
767 static void cp210x_break_ctl (struct tty_struct
*tty
, int break_state
)
769 struct usb_serial_port
*port
= tty
->driver_data
;
772 dbg("%s - port %d", __func__
, port
->number
);
773 if (break_state
== 0)
777 dbg("%s - turning break %s", __func__
,
778 state
== BREAK_OFF
? "off" : "on");
779 cp210x_set_config(port
, CP210X_SET_BREAK
, &state
, 2);
782 static int cp210x_startup(struct usb_serial
*serial
)
784 /* cp210x buffers behave strangely unless device is reset */
785 usb_reset_device(serial
->dev
);
789 static int __init
cp210x_init(void)
793 retval
= usb_serial_register(&cp210x_device
);
795 return retval
; /* Failed to register */
797 retval
= usb_register(&cp210x_driver
);
799 /* Failed to register */
800 usb_serial_deregister(&cp210x_device
);
805 printk(KERN_INFO KBUILD_MODNAME
": " DRIVER_VERSION
":"
810 static void __exit
cp210x_exit(void)
812 usb_deregister(&cp210x_driver
);
813 usb_serial_deregister(&cp210x_device
);
816 module_init(cp210x_init
);
817 module_exit(cp210x_exit
);
819 MODULE_DESCRIPTION(DRIVER_DESC
);
820 MODULE_VERSION(DRIVER_VERSION
);
821 MODULE_LICENSE("GPL");
823 module_param(debug
, bool, S_IRUGO
| S_IWUSR
);
824 MODULE_PARM_DESC(debug
, "Enable verbose debugging messages");