release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/usb/host/uhci-hcd.h

   1 #ifndef __LINUX_UHCI_HCD_H
   2 #define __LINUX_UHCI_HCD_H
   3
   4 #include <linux/list.h>
   5 #include <linux/usb.h>
   6
   7 #define usb_packetid(pipe)      (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT)
   8 #define PIPE_DEVEP_MASK         0x0007ff00
   9
  10
  11 /*
  12  * Universal Host Controller Interface data structures and defines
  13  */
  14
  15 /* Command register */
  16 #define USBCMD          0
  17 #define   USBCMD_RS             0x0001  /* Run/Stop */
  18 #define   USBCMD_HCRESET        0x0002  /* Host reset */
  19 #define   USBCMD_GRESET         0x0004  /* Global reset */
  20 #define   USBCMD_EGSM           0x0008  /* Global Suspend Mode */
  21 #define   USBCMD_FGR            0x0010  /* Force Global Resume */
  22 #define   USBCMD_SWDBG          0x0020  /* SW Debug mode */
  23 #define   USBCMD_CF             0x0040  /* Config Flag (sw only) */
  24 #define   USBCMD_MAXP           0x0080  /* Max Packet (0 = 32, 1 = 64) */
  25
  26 /* Status register */
  27 #define USBSTS          2
  28 #define   USBSTS_USBINT         0x0001  /* Interrupt due to IOC */
  29 #define   USBSTS_ERROR          0x0002  /* Interrupt due to error */
  30 #define   USBSTS_RD             0x0004  /* Resume Detect */
  31 #define   USBSTS_HSE            0x0008  /* Host System Error: PCI problems */
  32 #define   USBSTS_HCPE           0x0010  /* Host Controller Process Error:
  33                                          * the schedule is buggy */
  34 #define   USBSTS_HCH            0x0020  /* HC Halted */
  35
  36 /* Interrupt enable register */
  37 #define USBINTR         4
  38 #define   USBINTR_TIMEOUT       0x0001  /* Timeout/CRC error enable */
  39 #define   USBINTR_RESUME        0x0002  /* Resume interrupt enable */
  40 #define   USBINTR_IOC           0x0004  /* Interrupt On Complete enable */
  41 #define   USBINTR_SP            0x0008  /* Short packet interrupt enable */
  42
  43 #define USBFRNUM        6
  44 #define USBFLBASEADD    8
  45 #define USBSOF          12
  46 #define   USBSOF_DEFAULT        64      /* Frame length is exactly 1 ms */
  47
  48 /* USB port status and control registers */
  49 #define USBPORTSC1      16
  50 #define USBPORTSC2      18
  51 #define   USBPORTSC_CCS         0x0001  /* Current Connect Status
  52                                          * ("device present") */
  53 #define   USBPORTSC_CSC         0x0002  /* Connect Status Change */
  54 #define   USBPORTSC_PE          0x0004  /* Port Enable */
  55 #define   USBPORTSC_PEC         0x0008  /* Port Enable Change */
  56 #define   USBPORTSC_DPLUS       0x0010  /* D+ high (line status) */
  57 #define   USBPORTSC_DMINUS      0x0020  /* D- high (line status) */
  58 #define   USBPORTSC_RD          0x0040  /* Resume Detect */
  59 #define   USBPORTSC_RES1        0x0080  /* reserved, always 1 */
  60 #define   USBPORTSC_LSDA        0x0100  /* Low Speed Device Attached */
  61 #define   USBPORTSC_PR          0x0200  /* Port Reset */
  62 /* OC and OCC from Intel 430TX and later (not UHCI 1.1d spec) */
  63 #define   USBPORTSC_OC          0x0400  /* Over Current condition */
  64 #define   USBPORTSC_OCC         0x0800  /* Over Current Change R/WC */
  65 #define   USBPORTSC_SUSP        0x1000  /* Suspend */
  66 #define   USBPORTSC_RES2        0x2000  /* reserved, write zeroes */
  67 #define   USBPORTSC_RES3        0x4000  /* reserved, write zeroes */
  68 #define   USBPORTSC_RES4        0x8000  /* reserved, write zeroes */
  69
  70 /* PCI legacy support register */
  71 #define USBLEGSUP               0xc0
  72 #define   USBLEGSUP_DEFAULT     0x2000  /* only PIRQ enable set */
  73 #define   USBLEGSUP_RWC         0x8f00  /* the R/WC bits */
  74 #define   USBLEGSUP_RO          0x5040  /* R/O and reserved bits */
  75
  76 /* PCI Intel-specific resume-enable register */
  77 #define USBRES_INTEL            0xc4
  78 #define   USBPORT1EN            0x01
  79 #define   USBPORT2EN            0x02
  80
  81 #define UHCI_PTR_BITS           cpu_to_le32(0x000F)
  82 #define UHCI_PTR_TERM           cpu_to_le32(0x0001)
  83 #define UHCI_PTR_QH             cpu_to_le32(0x0002)
  84 #define UHCI_PTR_DEPTH          cpu_to_le32(0x0004)
  85 #define UHCI_PTR_BREADTH        cpu_to_le32(0x0000)
  86
  87 #define UHCI_NUMFRAMES          1024    /* in the frame list [array] */
  88 #define UHCI_MAX_SOF_NUMBER     2047    /* in an SOF packet */
  89 #define CAN_SCHEDULE_FRAMES     1000    /* how far in the future frames
  90                                          * can be scheduled */
  91 #define MAX_PHASE               32      /* Periodic scheduling length */
  92
  93 /* When no queues need Full-Speed Bandwidth Reclamation,
  94  * delay this long before turning FSBR off */
  95 #define FSBR_OFF_DELAY          msecs_to_jiffies(10)
  96
  97 /* If a queue hasn't advanced after this much time, assume it is stuck */
  98 #define QH_WAIT_TIMEOUT         msecs_to_jiffies(200)
  99
 100
 101 /*
 102  *      Queue Headers
 103  */
 104
 105 /*
 106  * One role of a QH is to hold a queue of TDs for some endpoint.  One QH goes
 107  * with each endpoint, and qh->element (updated by the HC) is either:
 108  *   - the next unprocessed TD in the endpoint's queue, or
 109  *   - UHCI_PTR_TERM (when there's no more traffic for this endpoint).
 110  *
 111  * The other role of a QH is to serve as a "skeleton" framelist entry, so we
 112  * can easily splice a QH for some endpoint into the schedule at the right
 113  * place.  Then qh->element is UHCI_PTR_TERM.
 114  *
 115  * In the schedule, qh->link maintains a list of QHs seen by the HC:
 116  *     skel1 --> ep1-qh --> ep2-qh --> ... --> skel2 --> ...
 117  *
 118  * qh->node is the software equivalent of qh->link.  The differences
 119  * are that the software list is doubly-linked and QHs in the UNLINKING
 120  * state are on the software list but not the hardware schedule.
 121  *
 122  * For bookkeeping purposes we maintain QHs even for Isochronous endpoints,
 123  * but they never get added to the hardware schedule.
 124  */
 125 #define QH_STATE_IDLE           1       /* QH is not being used */
 126 #define QH_STATE_UNLINKING      2       /* QH has been removed from the
 127                                          * schedule but the hardware may
 128                                          * still be using it */
 129 #define QH_STATE_ACTIVE         3       /* QH is on the schedule */
 130
 131 struct uhci_qh {
 132         /* Hardware fields */
 133         __le32 link;                    /* Next QH in the schedule */
 134         __le32 element;                 /* Queue element (TD) pointer */
 135
 136         /* Software fields */
 137         dma_addr_t dma_handle;
 138
 139         struct list_head node;          /* Node in the list of QHs */
 140         struct usb_host_endpoint *hep;  /* Endpoint information */
 141         struct usb_device *udev;
 142         struct list_head queue;         /* Queue of urbps for this QH */
 143         struct uhci_td *dummy_td;       /* Dummy TD to end the queue */
 144         struct uhci_td *post_td;        /* Last TD completed */
 145
 146         struct usb_iso_packet_descriptor *iso_packet_desc;
 147                                         /* Next urb->iso_frame_desc entry */
 148         unsigned long advance_jiffies;  /* Time of last queue advance */
 149         unsigned int unlink_frame;      /* When the QH was unlinked */
 150         unsigned int period;            /* For Interrupt and Isochronous QHs */
 151         short phase;                    /* Between 0 and period-1 */
 152         short load;                     /* Periodic time requirement, in us */
 153         unsigned int iso_frame;         /* Frame # for iso_packet_desc */
 154
 155         int state;                      /* QH_STATE_xxx; see above */
 156         int type;                       /* Queue type (control, bulk, etc) */
 157         int skel;                       /* Skeleton queue number */
 158
 159         unsigned int initial_toggle:1;  /* Endpoint's current toggle value */
 160         unsigned int needs_fixup:1;     /* Must fix the TD toggle values */
 161         unsigned int is_stopped:1;      /* Queue was stopped by error/unlink */
 162         unsigned int wait_expired:1;    /* QH_WAIT_TIMEOUT has expired */
 163         unsigned int bandwidth_reserved:1;      /* Periodic bandwidth has
 164                                                  * been allocated */
 165 } __attribute__((aligned(16)));
 166
 167 /*
 168  * We need a special accessor for the element pointer because it is
 169  * subject to asynchronous updates by the controller.
 170  */
 171 static inline __le32 qh_element(struct uhci_qh *qh) {
 172         __le32 element = qh->element;
 173
 174         barrier();
 175         return element;
 176 }
 177
 178 #define LINK_TO_QH(qh)          (UHCI_PTR_QH | cpu_to_le32((qh)->dma_handle))
 179
 180
 181 /*
 182  *      Transfer Descriptors
 183  */
 184
 185 /*
 186  * for TD <status>:
 187  */
 188 #define TD_CTRL_SPD             (1 << 29)       /* Short Packet Detect */
 189 #define TD_CTRL_C_ERR_MASK      (3 << 27)       /* Error Counter bits */
 190 #define TD_CTRL_C_ERR_SHIFT     27
 191 #define TD_CTRL_LS              (1 << 26)       /* Low Speed Device */
 192 #define TD_CTRL_IOS             (1 << 25)       /* Isochronous Select */
 193 #define TD_CTRL_IOC             (1 << 24)       /* Interrupt on Complete */
 194 #define TD_CTRL_ACTIVE          (1 << 23)       /* TD Active */
 195 #define TD_CTRL_STALLED         (1 << 22)       /* TD Stalled */
 196 #define TD_CTRL_DBUFERR         (1 << 21)       /* Data Buffer Error */
 197 #define TD_CTRL_BABBLE          (1 << 20)       /* Babble Detected */
 198 #define TD_CTRL_NAK             (1 << 19)       /* NAK Received */
 199 #define TD_CTRL_CRCTIMEO        (1 << 18)       /* CRC/Time Out Error */
 200 #define TD_CTRL_BITSTUFF        (1 << 17)       /* Bit Stuff Error */
 201 #define TD_CTRL_ACTLEN_MASK     0x7FF   /* actual length, encoded as n - 1 */
 202
 203 #define TD_CTRL_ANY_ERROR       (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
 204                                  TD_CTRL_BABBLE | TD_CTRL_CRCTIME | \
 205                                  TD_CTRL_BITSTUFF)
 206
 207 #define uhci_maxerr(err)                ((err) << TD_CTRL_C_ERR_SHIFT)
 208 #define uhci_status_bits(ctrl_sts)      ((ctrl_sts) & 0xF60000)
 209 #define uhci_actual_length(ctrl_sts)    (((ctrl_sts) + 1) & \
 210                         TD_CTRL_ACTLEN_MASK)    /* 1-based */
 211
 212 /*
 213  * for TD <info>: (a.k.a. Token)
 214  */
 215 #define td_token(td)            le32_to_cpu((td)->token)
 216 #define TD_TOKEN_DEVADDR_SHIFT  8
 217 #define TD_TOKEN_TOGGLE_SHIFT   19
 218 #define TD_TOKEN_TOGGLE         (1 << 19)
 219 #define TD_TOKEN_EXPLEN_SHIFT   21
 220 #define TD_TOKEN_EXPLEN_MASK    0x7FF   /* expected length, encoded as n-1 */
 221 #define TD_TOKEN_PID_MASK       0xFF
 222
 223 #define uhci_explen(len)        ((((len) - 1) & TD_TOKEN_EXPLEN_MASK) << \
 224                                         TD_TOKEN_EXPLEN_SHIFT)
 225
 226 #define uhci_expected_length(token) ((((token) >> TD_TOKEN_EXPLEN_SHIFT) + \
 227                                         1) & TD_TOKEN_EXPLEN_MASK)
 228 #define uhci_toggle(token)      (((token) >> TD_TOKEN_TOGGLE_SHIFT) & 1)
 229 #define uhci_endpoint(token)    (((token) >> 15) & 0xf)
 230 #define uhci_devaddr(token)     (((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7f)
 231 #define uhci_devep(token)       (((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7ff)
 232 #define uhci_packetid(token)    ((token) & TD_TOKEN_PID_MASK)
 233 #define uhci_packetout(token)   (uhci_packetid(token) != USB_PID_IN)
 234 #define uhci_packetin(token)    (uhci_packetid(token) == USB_PID_IN)
 235
 236 /*
 237  * The documentation says "4 words for hardware, 4 words for software".
 238  *
 239  * That's silly, the hardware doesn't care. The hardware only cares that
 240  * the hardware words are 16-byte aligned, and we can have any amount of
 241  * sw space after the TD entry.
 242  *
 243  * td->link points to either another TD (not necessarily for the same urb or
 244  * even the same endpoint), or nothing (PTR_TERM), or a QH.
 245  */
 246 struct uhci_td {
 247         /* Hardware fields */
 248         __le32 link;
 249         __le32 status;
 250         __le32 token;
 251         __le32 buffer;
 252
 253         /* Software fields */
 254         dma_addr_t dma_handle;
 255
 256         struct list_head list;
 257
 258         int frame;                      /* for iso: what frame? */
 259         struct list_head fl_list;
 260 } __attribute__((aligned(16)));
 261
 262 /*
 263  * We need a special accessor for the control/status word because it is
 264  * subject to asynchronous updates by the controller.
 265  */
 266 static inline u32 td_status(struct uhci_td *td) {
 267         __le32 status = td->status;
 268
 269         barrier();
 270         return le32_to_cpu(status);
 271 }
 272
 273 #define LINK_TO_TD(td)          (cpu_to_le32((td)->dma_handle))
 274
 275
 276 /*
 277  *      Skeleton Queue Headers
 278  */
 279
 280
 281 #define UHCI_NUM_SKELQH         11
 282 #define SKEL_UNLINK             0
 283 #define skel_unlink_qh          skelqh[SKEL_UNLINK]
 284 #define SKEL_ISO                1
 285 #define skel_iso_qh             skelqh[SKEL_ISO]
 286         /* int128, int64, ..., int1 = 2, 3, ..., 9 */
 287 #define SKEL_INDEX(exponent)    (9 - exponent)
 288 #define SKEL_ASYNC              9
 289 #define skel_async_qh           skelqh[SKEL_ASYNC]
 290 #define SKEL_TERM               10
 291 #define skel_term_qh            skelqh[SKEL_TERM]
 292
 293 /* The following entries refer to sublists of skel_async_qh */
 294 #define SKEL_LS_CONTROL         20
 295 #define SKEL_FS_CONTROL         21
 296 #define SKEL_FSBR               SKEL_FS_CONTROL
 297 #define SKEL_BULK               22
 298
 299 /*
 300  *      The UHCI controller and root hub
 301  */
 302
 303 /*
 304  * States for the root hub:
 305  *
 306  * To prevent "bouncing" in the presence of electrical noise,
 307  * when there are no devices attached we delay for 1 second in the
 308  * RUNNING_NODEVS state before switching to the AUTO_STOPPED state.
 309  *
 310  * (Note that the AUTO_STOPPED state won't be necessary once the hub
 311  * driver learns to autosuspend.)
 312  */
 313 enum uhci_rh_state {
 314         /* In the following states the HC must be halted.
 315          * These two must come first. */
 316         UHCI_RH_RESET,
 317         UHCI_RH_SUSPENDED,
 318
 319         UHCI_RH_AUTO_STOPPED,
 320         UHCI_RH_RESUMING,
 321
 322         /* In this state the HC changes from running to halted,
 323          * so it can legally appear either way. */
 324         UHCI_RH_SUSPENDING,
 325
 326         /* In the following states it's an error if the HC is halted.
 327          * These two must come last. */
 328         UHCI_RH_RUNNING,                /* The normal state */
 329         UHCI_RH_RUNNING_NODEVS,         /* Running with no devices attached */
 330 };
 331
 332 /*
 333  * The full UHCI controller information:
 334  */
 335 struct uhci_hcd {
 336
 337         /* debugfs */
 338         struct dentry *dentry;
 339
 340         /* Grabbed from PCI */
 341         unsigned long io_addr;
 342
 343         struct dma_pool *qh_pool;
 344         struct dma_pool *td_pool;
 345
 346         struct uhci_td *term_td;        /* Terminating TD, see UHCI bug */
 347         struct uhci_qh *skelqh[UHCI_NUM_SKELQH];        /* Skeleton QHs */
 348         struct uhci_qh *next_qh;        /* Next QH to scan */
 349
 350         spinlock_t lock;
 351
 352         dma_addr_t frame_dma_handle;    /* Hardware frame list */
 353         __le32 *frame;
 354         void **frame_cpu;               /* CPU's frame list */
 355
 356         enum uhci_rh_state rh_state;
 357         unsigned long auto_stop_time;           /* When to AUTO_STOP */
 358
 359         unsigned int frame_number;              /* As of last check */
 360         unsigned int is_stopped;
 361 #define UHCI_IS_STOPPED         9999            /* Larger than a frame # */
 362         unsigned int last_iso_frame;            /* Frame of last scan */
 363         unsigned int cur_iso_frame;             /* Frame for current scan */
 364
 365         unsigned int scan_in_progress:1;        /* Schedule scan is running */
 366         unsigned int need_rescan:1;             /* Redo the schedule scan */
 367         unsigned int dead:1;                    /* Controller has died */
 368         unsigned int RD_enable:1;               /* Suspended root hub with
 369                                                    Resume-Detect interrupts
 370                                                    enabled */
 371         unsigned int is_initialized:1;          /* Data structure is usable */
 372         unsigned int fsbr_is_on:1;              /* FSBR is turned on */
 373         unsigned int fsbr_is_wanted:1;          /* Does any URB want FSBR? */
 374         unsigned int fsbr_expiring:1;           /* FSBR is timing out */
 375
 376         struct timer_list fsbr_timer;           /* For turning off FBSR */
 377
 378         /* Support for port suspend/resume/reset */
 379         unsigned long port_c_suspend;           /* Bit-arrays of ports */
 380         unsigned long resuming_ports;
 381         unsigned long ports_timeout;            /* Time to stop signalling */
 382
 383         struct list_head idle_qh_list;          /* Where the idle QHs live */
 384
 385         int rh_numports;                        /* Number of root-hub ports */
 386
 387         wait_queue_head_t waitqh;               /* endpoint_disable waiters */
 388         int num_waiting;                        /* Number of waiters */
 389
 390         int total_load;                         /* Sum of array values */
 391         short load[MAX_PHASE];                  /* Periodic allocations */
 392 };
 393
 394 /* Convert between a usb_hcd pointer and the corresponding uhci_hcd */
 395 static inline struct uhci_hcd *hcd_to_uhci(struct usb_hcd *hcd)
 396 {
 397         return (struct uhci_hcd *) (hcd->hcd_priv);
 398 }
 399 static inline struct usb_hcd *uhci_to_hcd(struct uhci_hcd *uhci)
 400 {
 401         return container_of((void *) uhci, struct usb_hcd, hcd_priv);
 402 }
 403
 404 #define uhci_dev(u)     (uhci_to_hcd(u)->self.controller)
 405
 406 /* Utility macro for comparing frame numbers */
 407 #define uhci_frame_before_eq(f1, f2)    (0 <= (int) ((f2) - (f1)))
 408
 409
 410 /*
 411  *      Private per-URB data
 412  */
 413 struct urb_priv {
 414         struct list_head node;          /* Node in the QH's urbp list */
 415
 416         struct urb *urb;
 417
 418         struct uhci_qh *qh;             /* QH for this URB */
 419         struct list_head td_list;
 420
 421         unsigned fsbr:1;                /* URB wants FSBR */
 422 };
 423
 424
 425 /* Some special IDs */
 426
 427 #define PCI_VENDOR_ID_GENESYS           0x17a0
 428 #define PCI_DEVICE_ID_GL880S_UHCI       0x8083
 429
 430 #endif