release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/usb/host/ohci-pnx4008.c

   1 /*
   2  * drivers/usb/host/ohci-pnx4008.c
   3  *
   4  * driver for Philips PNX4008 USB Host
   5  *
   6  * Authors: Dmitry Chigirev <source@mvista.com>
   7  *          Vitaly Wool <vitalywool@gmail.com>
   8  *
   9  * register initialization is based on code examples provided by Philips
  10  * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
  11  *
  12  * NOTE: This driver does not have suspend/resume functionality
  13  * This driver is intended for engineering development purposes only
  14  *
  15  * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
  16  * the terms of the GNU General Public License version 2. This program
  17  * is licensed "as is" without any warranty of any kind, whether express
  18  * or implied.
  19  */
  20 #include <linux/clk.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/i2c.h>
  23
  24 #include <mach/hardware.h>
  25 #include <asm/io.h>
  26
  27 #include <mach/platform.h>
  28 #include <mach/irqs.h>
  29 #include <mach/gpio.h>
  30
  31 #define USB_CTRL        IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
  32
  33 /* USB_CTRL bit defines */
  34 #define USB_SLAVE_HCLK_EN       (1 << 24)
  35 #define USB_HOST_NEED_CLK_EN    (1 << 21)
  36
  37 #define USB_OTG_CLK_CTRL        IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF4)
  38 #define USB_OTG_CLK_STAT        IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF8)
  39
  40 /* USB_OTG_CLK_CTRL bit defines */
  41 #define AHB_M_CLOCK_ON          (1 << 4)
  42 #define OTG_CLOCK_ON            (1 << 3)
  43 #define I2C_CLOCK_ON            (1 << 2)
  44 #define DEV_CLOCK_ON            (1 << 1)
  45 #define HOST_CLOCK_ON           (1 << 0)
  46
  47 #define USB_OTG_STAT_CONTROL    IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x110)
  48
  49 /* USB_OTG_STAT_CONTROL bit defines */
  50 #define TRANSPARENT_I2C_EN      (1 << 7)
  51 #define HOST_EN                 (1 << 0)
  52
  53 /* ISP1301 USB transceiver I2C registers */
  54 #define ISP1301_MODE_CONTROL_1          0x04    /* u8 read, set, +1 clear */
  55
  56 #define MC1_SPEED_REG           (1 << 0)
  57 #define MC1_SUSPEND_REG         (1 << 1)
  58 #define MC1_DAT_SE0             (1 << 2)
  59 #define MC1_TRANSPARENT         (1 << 3)
  60 #define MC1_BDIS_ACON_EN        (1 << 4)
  61 #define MC1_OE_INT_EN           (1 << 5)
  62 #define MC1_UART_EN             (1 << 6)
  63 #define MC1_MASK                0x7f
  64
  65 #define ISP1301_MODE_CONTROL_2          0x12    /* u8 read, set, +1 clear */
  66
  67 #define MC2_GLOBAL_PWR_DN       (1 << 0)
  68 #define MC2_SPD_SUSP_CTRL       (1 << 1)
  69 #define MC2_BI_DI               (1 << 2)
  70 #define MC2_TRANSP_BDIR0        (1 << 3)
  71 #define MC2_TRANSP_BDIR1        (1 << 4)
  72 #define MC2_AUDIO_EN            (1 << 5)
  73 #define MC2_PSW_EN              (1 << 6)
  74 #define MC2_EN2V7               (1 << 7)
  75
  76 #define ISP1301_OTG_CONTROL_1           0x06    /* u8 read, set, +1 clear */
  77 #       define  OTG1_DP_PULLUP          (1 << 0)
  78 #       define  OTG1_DM_PULLUP          (1 << 1)
  79 #       define  OTG1_DP_PULLDOWN        (1 << 2)
  80 #       define  OTG1_DM_PULLDOWN        (1 << 3)
  81 #       define  OTG1_ID_PULLDOWN        (1 << 4)
  82 #       define  OTG1_VBUS_DRV           (1 << 5)
  83 #       define  OTG1_VBUS_DISCHRG       (1 << 6)
  84 #       define  OTG1_VBUS_CHRG          (1 << 7)
  85 #define ISP1301_OTG_STATUS              0x10    /* u8 readonly */
  86 #       define  OTG_B_SESS_END          (1 << 6)
  87 #       define  OTG_B_SESS_VLD          (1 << 7)
  88
  89 #define ISP1301_I2C_ADDR 0x2C
  90
  91 #define ISP1301_I2C_MODE_CONTROL_1 0x4
  92 #define ISP1301_I2C_MODE_CONTROL_2 0x12
  93 #define ISP1301_I2C_OTG_CONTROL_1 0x6
  94 #define ISP1301_I2C_OTG_CONTROL_2 0x10
  95 #define ISP1301_I2C_INTERRUPT_SOURCE 0x8
  96 #define ISP1301_I2C_INTERRUPT_LATCH 0xA
  97 #define ISP1301_I2C_INTERRUPT_FALLING 0xC
  98 #define ISP1301_I2C_INTERRUPT_RISING 0xE
  99 #define ISP1301_I2C_REG_CLEAR_ADDR 1
 100
 101 static struct i2c_driver isp1301_driver;
 102 static struct i2c_client *isp1301_i2c_client;
 103
 104 extern int usb_disabled(void);
 105 extern int ocpi_enable(void);
 106
 107 static struct clk *usb_clk;
 108
 109 static const unsigned short normal_i2c[] =
 110     { ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END };
 111
 112 static int isp1301_probe(struct i2c_client *client,
 113                          const struct i2c_device_id *id)
 114 {
 115         return 0;
 116 }
 117
 118 static int isp1301_remove(struct i2c_client *client)
 119 {
 120         return 0;
 121 }
 122
 123 static const struct i2c_device_id isp1301_id[] = {
 124         { "isp1301_pnx", 0 },
 125         { }
 126 };
 127
 128 static struct i2c_driver isp1301_driver = {
 129         .driver = {
 130                 .name = "isp1301_pnx",
 131         },
 132         .probe = isp1301_probe,
 133         .remove = isp1301_remove,
 134         .id_table = isp1301_id,
 135 };
 136
 137 static void i2c_write(u8 buf, u8 subaddr)
 138 {
 139         char tmpbuf[2];
 140
 141         tmpbuf[0] = subaddr;    /*register number */
 142         tmpbuf[1] = buf;        /*register data */
 143         i2c_master_send(isp1301_i2c_client, &tmpbuf[0], 2);
 144 }
 145
 146 static void isp1301_configure(void)
 147 {
 148         /* PNX4008 only supports DAT_SE0 USB mode */
 149         /* PNX4008 R2A requires setting the MAX603 to output 3.6V */
 150         /* Power up externel charge-pump */
 151
 152         i2c_write(MC1_DAT_SE0 | MC1_SPEED_REG, ISP1301_I2C_MODE_CONTROL_1);
 153         i2c_write(~(MC1_DAT_SE0 | MC1_SPEED_REG),
 154                   ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
 155         i2c_write(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL,
 156                   ISP1301_I2C_MODE_CONTROL_2);
 157         i2c_write(~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL),
 158                   ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR);
 159         i2c_write(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN,
 160                   ISP1301_I2C_OTG_CONTROL_1);
 161         i2c_write(~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN),
 162                   ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
 163         i2c_write(0xFF,
 164                   ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR);
 165         i2c_write(0xFF,
 166                   ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR);
 167         i2c_write(0xFF,
 168                   ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR);
 169
 170 }
 171
 172 static inline void isp1301_vbus_on(void)
 173 {
 174         i2c_write(OTG1_VBUS_DRV, ISP1301_I2C_OTG_CONTROL_1);
 175 }
 176
 177 static inline void isp1301_vbus_off(void)
 178 {
 179         i2c_write(OTG1_VBUS_DRV,
 180                   ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
 181 }
 182
 183 static void pnx4008_start_hc(void)
 184 {
 185         unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
 186         __raw_writel(tmp, USB_OTG_STAT_CONTROL);
 187         isp1301_vbus_on();
 188 }
 189
 190 static void pnx4008_stop_hc(void)
 191 {
 192         unsigned long tmp;
 193         isp1301_vbus_off();
 194         tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
 195         __raw_writel(tmp, USB_OTG_STAT_CONTROL);
 196 }
 197
 198 static int __devinit ohci_pnx4008_start(struct usb_hcd *hcd)
 199 {
 200         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 201         int ret;
 202
 203         if ((ret = ohci_init(ohci)) < 0)
 204                 return ret;
 205
 206         if ((ret = ohci_run(ohci)) < 0) {
 207                 dev_err(hcd->self.controller, "can't start\n");
 208                 ohci_stop(hcd);
 209                 return ret;
 210         }
 211         return 0;
 212 }
 213
 214 static const struct hc_driver ohci_pnx4008_hc_driver = {
 215         .description = hcd_name,
 216         .product_desc =         "pnx4008 OHCI",
 217
 218         /*
 219          * generic hardware linkage
 220          */
 221         .irq = ohci_irq,
 222         .flags = HCD_USB11 | HCD_MEMORY,
 223
 224         .hcd_priv_size =        sizeof(struct ohci_hcd),
 225         /*
 226          * basic lifecycle operations
 227          */
 228         .start = ohci_pnx4008_start,
 229         .stop = ohci_stop,
 230         .shutdown = ohci_shutdown,
 231
 232         /*
 233          * managing i/o requests and associated device resources
 234          */
 235         .urb_enqueue = ohci_urb_enqueue,
 236         .urb_dequeue = ohci_urb_dequeue,
 237         .endpoint_disable = ohci_endpoint_disable,
 238
 239         /*
 240          * scheduling support
 241          */
 242         .get_frame_number = ohci_get_frame,
 243
 244         /*
 245          * root hub support
 246          */
 247         .hub_status_data = ohci_hub_status_data,
 248         .hub_control = ohci_hub_control,
 249 #ifdef  CONFIG_PM
 250         .bus_suspend = ohci_bus_suspend,
 251         .bus_resume = ohci_bus_resume,
 252 #endif
 253         .start_port_reset = ohci_start_port_reset,
 254 };
 255
 256 #define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON)
 257
 258 static void pnx4008_set_usb_bits(void)
 259 {
 260         start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
 261         start_int_ack(SE_USB_OTG_ATX_INT_N);
 262         start_int_umask(SE_USB_OTG_ATX_INT_N);
 263
 264         start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
 265         start_int_ack(SE_USB_OTG_TIMER_INT);
 266         start_int_umask(SE_USB_OTG_TIMER_INT);
 267
 268         start_int_set_rising_edge(SE_USB_I2C_INT);
 269         start_int_ack(SE_USB_I2C_INT);
 270         start_int_umask(SE_USB_I2C_INT);
 271
 272         start_int_set_rising_edge(SE_USB_INT);
 273         start_int_ack(SE_USB_INT);
 274         start_int_umask(SE_USB_INT);
 275
 276         start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
 277         start_int_ack(SE_USB_NEED_CLK_INT);
 278         start_int_umask(SE_USB_NEED_CLK_INT);
 279
 280         start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
 281         start_int_ack(SE_USB_AHB_NEED_CLK_INT);
 282         start_int_umask(SE_USB_AHB_NEED_CLK_INT);
 283 }
 284
 285 static void pnx4008_unset_usb_bits(void)
 286 {
 287         start_int_mask(SE_USB_OTG_ATX_INT_N);
 288         start_int_mask(SE_USB_OTG_TIMER_INT);
 289         start_int_mask(SE_USB_I2C_INT);
 290         start_int_mask(SE_USB_INT);
 291         start_int_mask(SE_USB_NEED_CLK_INT);
 292         start_int_mask(SE_USB_AHB_NEED_CLK_INT);
 293 }
 294
 295 static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
 296 {
 297         struct usb_hcd *hcd = 0;
 298         struct ohci_hcd *ohci;
 299         const struct hc_driver *driver = &ohci_pnx4008_hc_driver;
 300         struct i2c_adapter *i2c_adap;
 301         struct i2c_board_info i2c_info;
 302
 303         int ret = 0, irq;
 304
 305         dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (pnx4008)\n", hcd_name);
 306         if (usb_disabled()) {
 307                 err("USB is disabled");
 308                 ret = -ENODEV;
 309                 goto out;
 310         }
 311
 312         if (pdev->num_resources != 2
 313             || pdev->resource[0].flags != IORESOURCE_MEM
 314             || pdev->resource[1].flags != IORESOURCE_IRQ) {
 315                 err("Invalid resource configuration");
 316                 ret = -ENODEV;
 317                 goto out;
 318         }
 319
 320         /* Enable AHB slave USB clock, needed for further USB clock control */
 321         __raw_writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL);
 322
 323         ret = i2c_add_driver(&isp1301_driver);
 324         if (ret < 0) {
 325                 err("failed to add ISP1301 driver");
 326                 goto out;
 327         }
 328         i2c_adap = i2c_get_adapter(2);
 329         memset(&i2c_info, 0, sizeof(struct i2c_board_info));
 330         strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
 331         isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
 332                                                    normal_i2c, NULL);
 333         i2c_put_adapter(i2c_adap);
 334         if (!isp1301_i2c_client) {
 335                 err("failed to connect I2C to ISP1301 USB Transceiver");
 336                 ret = -ENODEV;
 337                 goto out_i2c_driver;
 338         }
 339
 340         isp1301_configure();
 341
 342         /* Enable USB PLL */
 343         usb_clk = clk_get(&pdev->dev, "ck_pll5");
 344         if (IS_ERR(usb_clk)) {
 345                 err("failed to acquire USB PLL");
 346                 ret = PTR_ERR(usb_clk);
 347                 goto out1;
 348         }
 349
 350         ret = clk_enable(usb_clk);
 351         if (ret < 0) {
 352                 err("failed to start USB PLL");
 353                 goto out2;
 354         }
 355
 356         ret = clk_set_rate(usb_clk, 48000);
 357         if (ret < 0) {
 358                 err("failed to set USB clock rate");
 359                 goto out3;
 360         }
 361
 362         __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
 363
 364         /* Set to enable all needed USB clocks */
 365         __raw_writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL);
 366
 367         while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) !=
 368                USB_CLOCK_MASK) ;
 369
 370         hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev));
 371         if (!hcd) {
 372                 err("Failed to allocate HC buffer");
 373                 ret = -ENOMEM;
 374                 goto out3;
 375         }
 376
 377         /* Set all USB bits in the Start Enable register */
 378         pnx4008_set_usb_bits();
 379
 380         hcd->rsrc_start = pdev->resource[0].start;
 381         hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
 382         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 383                 dev_dbg(&pdev->dev, "request_mem_region failed\n");
 384                 ret =  -ENOMEM;
 385                 goto out4;
 386         }
 387         hcd->regs = (void __iomem *)pdev->resource[0].start;
 388
 389         irq = platform_get_irq(pdev, 0);
 390         if (irq < 0) {
 391                 ret = -ENXIO;
 392                 goto out4;
 393         }
 394
 395         pnx4008_start_hc();
 396         platform_set_drvdata(pdev, hcd);
 397         ohci = hcd_to_ohci(hcd);
 398         ohci_hcd_init(ohci);
 399
 400         dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
 401         ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
 402         if (ret == 0)
 403                 return ret;
 404
 405         pnx4008_stop_hc();
 406 out4:
 407         pnx4008_unset_usb_bits();
 408         usb_put_hcd(hcd);
 409 out3:
 410         clk_disable(usb_clk);
 411 out2:
 412         clk_put(usb_clk);
 413 out1:
 414         i2c_unregister_device(isp1301_i2c_client);
 415         isp1301_i2c_client = NULL;
 416 out_i2c_driver:
 417         i2c_del_driver(&isp1301_driver);
 418 out:
 419         return ret;
 420 }
 421
 422 static int usb_hcd_pnx4008_remove(struct platform_device *pdev)
 423 {
 424         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 425
 426         usb_remove_hcd(hcd);
 427         pnx4008_stop_hc();
 428         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 429         usb_put_hcd(hcd);
 430         pnx4008_unset_usb_bits();
 431         clk_disable(usb_clk);
 432         clk_put(usb_clk);
 433         i2c_unregister_device(isp1301_i2c_client);
 434         isp1301_i2c_client = NULL;
 435         i2c_del_driver(&isp1301_driver);
 436
 437         platform_set_drvdata(pdev, NULL);
 438
 439         return 0;
 440 }
 441
 442 /* work with hotplug and coldplug */
 443 MODULE_ALIAS("platform:usb-ohci");
 444
 445 static struct platform_driver usb_hcd_pnx4008_driver = {
 446         .driver = {
 447                 .name = "usb-ohci",
 448                 .owner  = THIS_MODULE,
 449         },
 450         .probe = usb_hcd_pnx4008_probe,
 451         .remove = usb_hcd_pnx4008_remove,
 452 };