GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / usb / c67x00 / c67x00.h
bloba26e9ded0f323d340f7a348c37223e78c41cd373
1 /*
2 * c67x00.h: Cypress C67X00 USB register and field definitions
4 * Copyright (C) 2006-2008 Barco N.V.
5 * Derived from the Cypress cy7c67200/300 ezusb linux driver and
6 * based on multiple host controller drivers inside the linux kernel.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
21 * MA 02110-1301 USA.
24 #ifndef _USB_C67X00_H
25 #define _USB_C67X00_H
27 #include <linux/spinlock.h>
28 #include <linux/platform_device.h>
29 #include <linux/completion.h>
30 #include <linux/mutex.h>
32 /* ---------------------------------------------------------------------
33 * Cypress C67x00 register definitions
36 /* Hardware Revision Register */
37 #define HW_REV_REG 0xC004
39 /* General USB registers */
40 /* ===================== */
42 /* USB Control Register */
43 #define USB_CTL_REG(x) ((x) ? 0xC0AA : 0xC08A)
45 #define LOW_SPEED_PORT(x) ((x) ? 0x0800 : 0x0400)
46 #define HOST_MODE 0x0200
47 #define PORT_RES_EN(x) ((x) ? 0x0100 : 0x0080)
48 #define SOF_EOP_EN(x) ((x) ? 0x0002 : 0x0001)
50 /* USB status register - Notice it has different content in hcd/udc mode */
51 #define USB_STAT_REG(x) ((x) ? 0xC0B0 : 0xC090)
53 #define EP0_IRQ_FLG 0x0001
54 #define EP1_IRQ_FLG 0x0002
55 #define EP2_IRQ_FLG 0x0004
56 #define EP3_IRQ_FLG 0x0008
57 #define EP4_IRQ_FLG 0x0010
58 #define EP5_IRQ_FLG 0x0020
59 #define EP6_IRQ_FLG 0x0040
60 #define EP7_IRQ_FLG 0x0080
61 #define RESET_IRQ_FLG 0x0100
62 #define SOF_EOP_IRQ_FLG 0x0200
63 #define ID_IRQ_FLG 0x4000
64 #define VBUS_IRQ_FLG 0x8000
66 /* USB Host only registers */
67 /* ======================= */
69 /* Host n Control Register */
70 #define HOST_CTL_REG(x) ((x) ? 0xC0A0 : 0xC080)
72 #define PREAMBLE_EN 0x0080 /* Preamble enable */
73 #define SEQ_SEL 0x0040 /* Data Toggle Sequence Bit Select */
74 #define ISO_EN 0x0010 /* Isochronous enable */
75 #define ARM_EN 0x0001 /* Arm operation */
77 /* Host n Interrupt Enable Register */
78 #define HOST_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
80 #define SOF_EOP_IRQ_EN 0x0200 /* SOF/EOP Interrupt Enable */
81 #define SOF_EOP_TMOUT_IRQ_EN 0x0800 /* SOF/EOP Timeout Interrupt Enable */
82 #define ID_IRQ_EN 0x4000 /* ID interrupt enable */
83 #define VBUS_IRQ_EN 0x8000 /* VBUS interrupt enable */
84 #define DONE_IRQ_EN 0x0001 /* Done Interrupt Enable */
86 /* USB status register */
87 #define HOST_STAT_MASK 0x02FD
88 #define PORT_CONNECT_CHANGE(x) ((x) ? 0x0020 : 0x0010)
89 #define PORT_SE0_STATUS(x) ((x) ? 0x0008 : 0x0004)
91 /* Host Frame Register */
92 #define HOST_FRAME_REG(x) ((x) ? 0xC0B6 : 0xC096)
94 #define HOST_FRAME_MASK 0x07FF
96 /* USB Peripheral only registers */
97 /* ============================= */
99 /* Device n Port Sel reg */
100 #define DEVICE_N_PORT_SEL(x) ((x) ? 0xC0A4 : 0xC084)
102 /* Device n Interrupt Enable Register */
103 #define DEVICE_N_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
105 #define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep) ((dev) \
106 ? (0x0280 + (ep << 4)) \
107 : (0x0200 + (ep << 4)))
108 #define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep) ((dev) \
109 ? (0x0286 + (ep << 4)) \
110 : (0x0206 + (ep << 4)))
112 #define DEVICE_N_ADDRESS(dev) ((dev) ? (0xC0AE) : (0xC08E))
114 /* HPI registers */
115 /* ============= */
117 /* HPI Status register */
118 #define SOFEOP_FLG(x) (1 << ((x) ? 12 : 10))
119 #define SIEMSG_FLG(x) (1 << (4 + (x)))
120 #define RESET_FLG(x) ((x) ? 0x0200 : 0x0002)
121 #define DONE_FLG(x) (1 << (2 + (x)))
122 #define RESUME_FLG(x) (1 << (6 + (x)))
123 #define MBX_OUT_FLG 0x0001 /* Message out available */
124 #define MBX_IN_FLG 0x0100
125 #define ID_FLG 0x4000
126 #define VBUS_FLG 0x8000
128 /* Interrupt routing register */
129 #define HPI_IRQ_ROUTING_REG 0x0142
131 #define HPI_SWAP_ENABLE(x) ((x) ? 0x0100 : 0x0001)
132 #define RESET_TO_HPI_ENABLE(x) ((x) ? 0x0200 : 0x0002)
133 #define DONE_TO_HPI_ENABLE(x) ((x) ? 0x0008 : 0x0004)
134 #define RESUME_TO_HPI_ENABLE(x) ((x) ? 0x0080 : 0x0040)
135 #define SOFEOP_TO_HPI_EN(x) ((x) ? 0x2000 : 0x0800)
136 #define SOFEOP_TO_CPU_EN(x) ((x) ? 0x1000 : 0x0400)
137 #define ID_TO_HPI_ENABLE 0x4000
138 #define VBUS_TO_HPI_ENABLE 0x8000
140 /* SIE msg registers */
141 #define SIEMSG_REG(x) ((x) ? 0x0148 : 0x0144)
143 #define HUSB_TDListDone 0x1000
145 #define SUSB_EP0_MSG 0x0001
146 #define SUSB_EP1_MSG 0x0002
147 #define SUSB_EP2_MSG 0x0004
148 #define SUSB_EP3_MSG 0x0008
149 #define SUSB_EP4_MSG 0x0010
150 #define SUSB_EP5_MSG 0x0020
151 #define SUSB_EP6_MSG 0x0040
152 #define SUSB_EP7_MSG 0x0080
153 #define SUSB_RST_MSG 0x0100
154 #define SUSB_SOF_MSG 0x0200
155 #define SUSB_CFG_MSG 0x0400
156 #define SUSB_SUS_MSG 0x0800
157 #define SUSB_ID_MSG 0x4000
158 #define SUSB_VBUS_MSG 0x8000
160 /* BIOS interrupt routines */
162 #define SUSBx_RECEIVE_INT(x) ((x) ? 97 : 81)
163 #define SUSBx_SEND_INT(x) ((x) ? 96 : 80)
165 #define SUSBx_DEV_DESC_VEC(x) ((x) ? 0x00D4 : 0x00B4)
166 #define SUSBx_CONF_DESC_VEC(x) ((x) ? 0x00D6 : 0x00B6)
167 #define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)
169 #define CY_HCD_BUF_ADDR 0x500 /* Base address for host */
170 #define SIE_TD_SIZE 0x200 /* size of the td list */
171 #define SIE_TD_BUF_SIZE 0x400 /* size of the data buffer */
173 #define SIE_TD_OFFSET(host) ((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
174 #define SIE_BUF_OFFSET(host) (SIE_TD_OFFSET(host) + SIE_TD_SIZE)
176 /* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
177 #define CY_UDC_REQ_HEADER_BASE 0x1100
178 /* 8- byte request headers for IN/OUT transfers */
179 #define CY_UDC_REQ_HEADER_SIZE 8
181 #define CY_UDC_REQ_HEADER_ADDR(ep_num) (CY_UDC_REQ_HEADER_BASE + \
182 ((ep_num) * CY_UDC_REQ_HEADER_SIZE))
183 #define CY_UDC_DESC_BASE_ADDRESS (CY_UDC_REQ_HEADER_ADDR(8))
185 #define CY_UDC_BIOS_REPLACE_BASE 0x1800
186 #define CY_UDC_REQ_BUFFER_BASE 0x2000
187 #define CY_UDC_REQ_BUFFER_SIZE 0x0400
188 #define CY_UDC_REQ_BUFFER_ADDR(ep_num) (CY_UDC_REQ_BUFFER_BASE + \
189 ((ep_num) * CY_UDC_REQ_BUFFER_SIZE))
191 /* ---------------------------------------------------------------------
192 * Driver data structures
195 struct c67x00_device;
198 * struct c67x00_sie - Common data associated with a SIE
199 * @lock: lock to protect this struct and the associated chip registers
200 * @private_data: subdriver dependent data
201 * @irq: subdriver dependent irq handler, set NULL when not used
202 * @dev: link to common driver structure
203 * @sie_num: SIE number on chip, starting from 0
204 * @mode: SIE mode (host/peripheral/otg/not used)
206 struct c67x00_sie {
207 /* Entries to be used by the subdrivers */
208 spinlock_t lock; /* protect this structure */
209 void *private_data;
210 void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg);
212 /* Read only: */
213 struct c67x00_device *dev;
214 int sie_num;
215 int mode;
218 #define sie_dev(s) (&(s)->dev->pdev->dev)
221 * struct c67x00_lcp
223 struct c67x00_lcp {
224 /* Internal use only */
225 struct mutex mutex;
226 struct completion msg_received;
227 u16 last_msg;
231 * struct c67x00_hpi
233 struct c67x00_hpi {
234 void __iomem *base;
235 int regstep;
236 spinlock_t lock;
237 struct c67x00_lcp lcp;
240 #define C67X00_SIES 2
241 #define C67X00_PORTS 2
244 * struct c67x00_device - Common data associated with a c67x00 instance
245 * @hpi: hpi addresses
246 * @sie: array of sie's on this chip
247 * @pdev: platform device of instance
248 * @pdata: configuration provided by the platform
250 struct c67x00_device {
251 struct c67x00_hpi hpi;
252 struct c67x00_sie sie[C67X00_SIES];
253 struct platform_device *pdev;
254 struct c67x00_platform_data *pdata;
257 /* ---------------------------------------------------------------------
258 * Low level interface functions
261 /* Host Port Interface (HPI) functions */
262 u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
263 void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
264 void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
265 void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);
267 /* General functions */
268 u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
269 u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
270 void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
271 u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
272 void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
273 void *data, int len);
274 void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
275 void *data, int len);
277 /* Host specific functions */
278 void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
279 void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
280 void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
281 u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
282 u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
283 void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
284 void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);
286 /* Called by c67x00_irq to handle lcp interrupts */
287 void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);
289 /* Setup and teardown */
290 void c67x00_ll_init(struct c67x00_device *dev);
291 void c67x00_ll_release(struct c67x00_device *dev);
292 int c67x00_ll_reset(struct c67x00_device *dev);
294 #endif /* _USB_C67X00_H */