release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/staging/octeon/cvmx-helper.h

   1 /***********************license start***************
   2  * Author: Cavium Networks
   3  *
   4  * Contact: support@caviumnetworks.com
   5  * This file is part of the OCTEON SDK
   6  *
   7  * Copyright (c) 2003-2008 Cavium Networks
   8  *
   9  * This file is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License, Version 2, as
  11  * published by the Free Software Foundation.
  12  *
  13  * This file is distributed in the hope that it will be useful, but
  14  * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
  15  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
  16  * NONINFRINGEMENT.  See the GNU General Public License for more
  17  * details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this file; if not, write to the Free Software
  21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  22  * or visit http://www.gnu.org/licenses/.
  23  *
  24  * This file may also be available under a different license from Cavium.
  25  * Contact Cavium Networks for more information
  26  ***********************license end**************************************/
  27
  28 /*
  29  *
  30  * Helper functions for common, but complicated tasks.
  31  *
  32  */
  33
  34 #ifndef __CVMX_HELPER_H__
  35 #define __CVMX_HELPER_H__
  36
  37 #include "cvmx-config.h"
  38 #include "cvmx-fpa.h"
  39 #include "cvmx-wqe.h"
  40
  41 typedef enum {
  42         CVMX_HELPER_INTERFACE_MODE_DISABLED,
  43         CVMX_HELPER_INTERFACE_MODE_RGMII,
  44         CVMX_HELPER_INTERFACE_MODE_GMII,
  45         CVMX_HELPER_INTERFACE_MODE_SPI,
  46         CVMX_HELPER_INTERFACE_MODE_PCIE,
  47         CVMX_HELPER_INTERFACE_MODE_XAUI,
  48         CVMX_HELPER_INTERFACE_MODE_SGMII,
  49         CVMX_HELPER_INTERFACE_MODE_PICMG,
  50         CVMX_HELPER_INTERFACE_MODE_NPI,
  51         CVMX_HELPER_INTERFACE_MODE_LOOP,
  52 } cvmx_helper_interface_mode_t;
  53
  54 typedef union {
  55         uint64_t u64;
  56         struct {
  57                 uint64_t reserved_20_63:44;
  58                 uint64_t link_up:1;         /**< Is the physical link up? */
  59                 uint64_t full_duplex:1;     /**< 1 if the link is full duplex */
  60                 uint64_t speed:18;          /**< Speed of the link in Mbps */
  61         } s;
  62 } cvmx_helper_link_info_t;
  63
  64 #include "cvmx-helper-fpa.h"
  65
  66 #include <asm/octeon/cvmx-helper-errata.h>
  67 #include "cvmx-helper-loop.h"
  68 #include "cvmx-helper-npi.h"
  69 #include "cvmx-helper-rgmii.h"
  70 #include "cvmx-helper-sgmii.h"
  71 #include "cvmx-helper-spi.h"
  72 #include "cvmx-helper-util.h"
  73 #include "cvmx-helper-xaui.h"
  74
  75 /**
  76  * cvmx_override_pko_queue_priority(int ipd_port, uint64_t
  77  * priorities[16]) is a function pointer. It is meant to allow
  78  * customization of the PKO queue priorities based on the port
  79  * number. Users should set this pointer to a function before
  80  * calling any cvmx-helper operations.
  81  */
  82 extern void (*cvmx_override_pko_queue_priority) (int pko_port,
  83                                                  uint64_t priorities[16]);
  84
  85 /**
  86  * cvmx_override_ipd_port_setup(int ipd_port) is a function
  87  * pointer. It is meant to allow customization of the IPD port
  88  * setup before packet input/output comes online. It is called
  89  * after cvmx-helper does the default IPD configuration, but
  90  * before IPD is enabled. Users should set this pointer to a
  91  * function before calling any cvmx-helper operations.
  92  */
  93 extern void (*cvmx_override_ipd_port_setup) (int ipd_port);
  94
  95 /**
  96  * This function enables the IPD and also enables the packet interfaces.
  97  * The packet interfaces (RGMII and SPI) must be enabled after the
  98  * IPD.  This should be called by the user program after any additional
  99  * IPD configuration changes are made if CVMX_HELPER_ENABLE_IPD
 100  * is not set in the executive-config.h file.
 101  *
 102  * Returns 0 on success
 103  *         -1 on failure
 104  */
 105 extern int cvmx_helper_ipd_and_packet_input_enable(void);
 106
 107 /**
 108  * Initialize the PIP, IPD, and PKO hardware to support
 109  * simple priority based queues for the ethernet ports. Each
 110  * port is configured with a number of priority queues based
 111  * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower
 112  * priority than the previous.
 113  *
 114  * Returns Zero on success, non-zero on failure
 115  */
 116 extern int cvmx_helper_initialize_packet_io_global(void);
 117
 118 /**
 119  * Does core local initialization for packet io
 120  *
 121  * Returns Zero on success, non-zero on failure
 122  */
 123 extern int cvmx_helper_initialize_packet_io_local(void);
 124
 125 /**
 126  * Returns the number of ports on the given interface.
 127  * The interface must be initialized before the port count
 128  * can be returned.
 129  *
 130  * @interface: Which interface to return port count for.
 131  *
 132  * Returns Port count for interface
 133  *         -1 for uninitialized interface
 134  */
 135 extern int cvmx_helper_ports_on_interface(int interface);
 136
 137 /**
 138  * Return the number of interfaces the chip has. Each interface
 139  * may have multiple ports. Most chips support two interfaces,
 140  * but the CNX0XX and CNX1XX are exceptions. These only support
 141  * one interface.
 142  *
 143  * Returns Number of interfaces on chip
 144  */
 145 extern int cvmx_helper_get_number_of_interfaces(void);
 146
 147 /**
 148  * Get the operating mode of an interface. Depending on the Octeon
 149  * chip and configuration, this function returns an enumeration
 150  * of the type of packet I/O supported by an interface.
 151  *
 152  * @interface: Interface to probe
 153  *
 154  * Returns Mode of the interface. Unknown or unsupported interfaces return
 155  *         DISABLED.
 156  */
 157 extern cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int
 158                                                                    interface);
 159
 160 /**
 161  * Auto configure an IPD/PKO port link state and speed. This
 162  * function basically does the equivalent of:
 163  * cvmx_helper_link_set(ipd_port, cvmx_helper_link_get(ipd_port));
 164  *
 165  * @ipd_port: IPD/PKO port to auto configure
 166  *
 167  * Returns Link state after configure
 168  */
 169 extern cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port);
 170
 171 /**
 172  * Return the link state of an IPD/PKO port as returned by
 173  * auto negotiation. The result of this function may not match
 174  * Octeon's link config if auto negotiation has changed since
 175  * the last call to cvmx_helper_link_set().
 176  *
 177  * @ipd_port: IPD/PKO port to query
 178  *
 179  * Returns Link state
 180  */
 181 extern cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port);
 182
 183 /**
 184  * Configure an IPD/PKO port for the specified link state. This
 185  * function does not influence auto negotiation at the PHY level.
 186  * The passed link state must always match the link state returned
 187  * by cvmx_helper_link_get(). It is normally best to use
 188  * cvmx_helper_link_autoconf() instead.
 189  *
 190  * @ipd_port:  IPD/PKO port to configure
 191  * @link_info: The new link state
 192  *
 193  * Returns Zero on success, negative on failure
 194  */
 195 extern int cvmx_helper_link_set(int ipd_port,
 196                                 cvmx_helper_link_info_t link_info);
 197
 198 /**
 199  * This function probes an interface to determine the actual
 200  * number of hardware ports connected to it. It doesn't setup the
 201  * ports or enable them. The main goal here is to set the global
 202  * interface_port_count[interface] correctly. Hardware setup of the
 203  * ports will be performed later.
 204  *
 205  * @interface: Interface to probe
 206  *
 207  * Returns Zero on success, negative on failure
 208  */
 209 extern int cvmx_helper_interface_probe(int interface);
 210
 211 /**
 212  * Configure a port for internal and/or external loopback. Internal loopback
 213  * causes packets sent by the port to be received by Octeon. External loopback
 214  * causes packets received from the wire to sent out again.
 215  *
 216  * @ipd_port: IPD/PKO port to loopback.
 217  * @enable_internal:
 218  *                 Non zero if you want internal loopback
 219  * @enable_external:
 220  *                 Non zero if you want external loopback
 221  *
 222  * Returns Zero on success, negative on failure.
 223  */
 224 extern int cvmx_helper_configure_loopback(int ipd_port, int enable_internal,
 225                                           int enable_external);
 226
 227 #endif /* __CVMX_HELPER_H__ */