release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/staging/msm/mdp_vsync.c

   1 /* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
   2  *
   3  * This program is free software; you can redistribute it and/or modify
   4  * it under the terms of the GNU General Public License version 2 and
   5  * only version 2 as published by the Free Software Foundation.
   6  *
   7  * This program is distributed in the hope that it will be useful,
   8  * but WITHOUT ANY WARRANTY; without even the implied warranty of
   9  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  10  * GNU General Public License for more details.
  11  *
  12  * You should have received a copy of the GNU General Public License
  13  * along with this program; if not, write to the Free Software
  14  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  15  * 02110-1301, USA.
  16  */
  17
  18 #include <linux/module.h>
  19 #include <linux/kernel.h>
  20 #include <linux/sched.h>
  21 #include <linux/time.h>
  22 #include <linux/init.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/spinlock.h>
  25 #include <linux/hrtimer.h>
  26 #include <linux/vmalloc.h>
  27 #include <linux/clk.h>
  28
  29 #include <mach/hardware.h>
  30 #include <linux/io.h>
  31
  32 #include <asm/system.h>
  33 #include <asm/mach-types.h>
  34 #include <linux/semaphore.h>
  35 #include <linux/uaccess.h>
  36 #include <mach/gpio.h>
  37
  38 #include "mdp.h"
  39 #include "msm_fb.h"
  40 #include "mddihost.h"
  41
  42 #ifdef CONFIG_FB_MSM_MDP40
  43 #define MDP_SYNC_CFG_0          0x100
  44 #define MDP_SYNC_STATUS_0       0x10c
  45 #define MDP_PRIM_VSYNC_OUT_CTRL 0x118
  46 #define MDP_PRIM_VSYNC_INIT_VAL 0x128
  47 #else
  48 #define MDP_SYNC_CFG_0          0x300
  49 #define MDP_SYNC_STATUS_0       0x30c
  50 #define MDP_PRIM_VSYNC_OUT_CTRL 0x318
  51 #define MDP_PRIM_VSYNC_INIT_VAL 0x328
  52 #endif
  53
  54 extern mddi_lcd_type mddi_lcd_idx;
  55 extern spinlock_t mdp_spin_lock;
  56 extern struct workqueue_struct *mdp_vsync_wq;
  57 extern int lcdc_mode;
  58 extern int vsync_mode;
  59
  60 #ifdef MDP_HW_VSYNC
  61 int vsync_above_th = 4;
  62 int vsync_start_th = 1;
  63 int vsync_load_cnt;
  64
  65 struct clk *mdp_vsync_clk;
  66
  67 void mdp_hw_vsync_clk_enable(struct msm_fb_data_type *mfd)
  68 {
  69         if (mfd->use_mdp_vsync)
  70                 clk_enable(mdp_vsync_clk);
  71 }
  72
  73 void mdp_hw_vsync_clk_disable(struct msm_fb_data_type *mfd)
  74 {
  75         if (mfd->use_mdp_vsync)
  76                 clk_disable(mdp_vsync_clk);
  77 }
  78 #endif
  79
  80 static void mdp_set_vsync(unsigned long data)
  81 {
  82         struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
  83         struct msm_fb_panel_data *pdata = NULL;
  84
  85         pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
  86
  87         if ((pdata) && (pdata->set_vsync_notifier == NULL))
  88                 return;
  89
  90         init_timer(&mfd->vsync_resync_timer);
  91         mfd->vsync_resync_timer.function = mdp_set_vsync;
  92         mfd->vsync_resync_timer.data = data;
  93         mfd->vsync_resync_timer.expires =
  94             jiffies + mfd->panel_info.lcd.vsync_notifier_period;
  95         add_timer(&mfd->vsync_resync_timer);
  96
  97         if ((mfd->panel_info.lcd.vsync_enable) && (mfd->panel_power_on)
  98             && (!mfd->vsync_handler_pending)) {
  99                 mfd->vsync_handler_pending = TRUE;
 100                 if (!queue_work(mdp_vsync_wq, &mfd->vsync_resync_worker)) {
 101                         MSM_FB_INFO
 102                             ("mdp_set_vsync: can't queue_work! -> needs to increase vsync_resync_timer_duration\n");
 103                 }
 104         } else {
 105                 MSM_FB_DEBUG
 106                     ("mdp_set_vsync failed!  EN:%d  PWR:%d  PENDING:%d\n",
 107                      mfd->panel_info.lcd.vsync_enable, mfd->panel_power_on,
 108                      mfd->vsync_handler_pending);
 109         }
 110 }
 111
 112 static void mdp_vsync_handler(void *data)
 113 {
 114         struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
 115
 116         if (mfd->use_mdp_vsync) {
 117 #ifdef MDP_HW_VSYNC
 118                 if (mfd->panel_power_on)
 119                         MDP_OUTP(MDP_BASE + MDP_SYNC_STATUS_0, vsync_load_cnt);
 120
 121                 mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, TRUE);
 122 #endif
 123         } else {
 124                 mfd->last_vsync_timetick = ktime_get_real();
 125         }
 126
 127         mfd->vsync_handler_pending = FALSE;
 128 }
 129
 130 irqreturn_t mdp_hw_vsync_handler_proxy(int irq, void *data)
 131 {
 132         /*
 133          * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt
 134          * but getting inaccurate timing in mdp_vsync_handler()
 135          * disable_irq(MDP_HW_VSYNC_IRQ);
 136          */
 137         mdp_vsync_handler(data);
 138
 139         return IRQ_HANDLED;
 140 }
 141
 142 #ifdef MDP_HW_VSYNC
 143 static void mdp_set_sync_cfg_0(struct msm_fb_data_type *mfd, int vsync_cnt)
 144 {
 145         unsigned long cfg;
 146
 147         cfg = mfd->total_lcd_lines - 1;
 148         cfg <<= MDP_SYNCFG_HGT_LOC;
 149         if (mfd->panel_info.lcd.hw_vsync_mode)
 150                 cfg |= MDP_SYNCFG_VSYNC_EXT_EN;
 151         cfg |= (MDP_SYNCFG_VSYNC_INT_EN | vsync_cnt);
 152
 153         MDP_OUTP(MDP_BASE + MDP_SYNC_CFG_0, cfg);
 154 }
 155 #endif
 156
 157 void mdp_config_vsync(struct msm_fb_data_type *mfd)
 158 {
 159
 160         /* vsync on primary lcd only for now */
 161         if ((mfd->dest != DISPLAY_LCD) || (mfd->panel_info.pdest != DISPLAY_1)
 162             || (!vsync_mode)) {
 163                 goto err_handle;
 164         }
 165
 166         if (mfd->panel_info.lcd.vsync_enable) {
 167                 mfd->total_porch_lines = mfd->panel_info.lcd.v_back_porch +
 168                     mfd->panel_info.lcd.v_front_porch +
 169                     mfd->panel_info.lcd.v_pulse_width;
 170                 mfd->total_lcd_lines =
 171                     mfd->panel_info.yres + mfd->total_porch_lines;
 172                 mfd->lcd_ref_usec_time =
 173                     100000000 / mfd->panel_info.lcd.refx100;
 174                 mfd->vsync_handler_pending = FALSE;
 175                 mfd->last_vsync_timetick.tv.sec = 0;
 176                 mfd->last_vsync_timetick.tv.nsec = 0;
 177
 178 #ifdef MDP_HW_VSYNC
 179                 if (mdp_vsync_clk == NULL)
 180                         mdp_vsync_clk = clk_get(NULL, "mdp_vsync_clk");
 181
 182                 if (IS_ERR(mdp_vsync_clk)) {
 183                         printk(KERN_ERR "error: can't get mdp_vsync_clk!\n");
 184                         mfd->use_mdp_vsync = 0;
 185                 } else
 186                         mfd->use_mdp_vsync = 1;
 187
 188                 if (mfd->use_mdp_vsync) {
 189                         uint32 vsync_cnt_cfg, vsync_cnt_cfg_dem;
 190                         uint32 mdp_vsync_clk_speed_hz;
 191
 192                         mdp_vsync_clk_speed_hz = clk_get_rate(mdp_vsync_clk);
 193
 194                         if (mdp_vsync_clk_speed_hz == 0) {
 195                                 mfd->use_mdp_vsync = 0;
 196                         } else {
 197                                 /*
 198                                  * Do this calculation in 2 steps for
 199                                  * rounding uint32 properly.
 200                                  */
 201                                 vsync_cnt_cfg_dem =
 202                                     (mfd->panel_info.lcd.refx100 *
 203                                      mfd->total_lcd_lines) / 100;
 204                                 vsync_cnt_cfg =
 205                                     (mdp_vsync_clk_speed_hz) /
 206                                     vsync_cnt_cfg_dem;
 207
 208                                 /* MDP cmd block enable */
 209                                 mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
 210                                               FALSE);
 211                                 mdp_hw_vsync_clk_enable(mfd);
 212
 213                                 mdp_set_sync_cfg_0(mfd, vsync_cnt_cfg);
 214
 215                                 /*
 216                                  * load the last line + 1 to be in the
 217                                  * safety zone
 218                                  */
 219                                 vsync_load_cnt = mfd->panel_info.yres;
 220
 221                                 /* line counter init value at the next pulse */
 222                                 MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_INIT_VAL,
 223                                                         vsync_load_cnt);
 224
 225                                 /*
 226                                  * external vsync source pulse width and
 227                                  * polarity flip
 228                                  */
 229                                 MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_OUT_CTRL,
 230                                                         BIT(30) | BIT(0));
 231
 232
 233                                 /* threshold */
 234                                 MDP_OUTP(MDP_BASE + 0x200,
 235                                          (vsync_above_th << 16) |
 236                                          (vsync_start_th));
 237
 238                                 mdp_hw_vsync_clk_disable(mfd);
 239                                 /* MDP cmd block disable */
 240                                 mdp_pipe_ctrl(MDP_CMD_BLOCK,
 241                                               MDP_BLOCK_POWER_OFF, FALSE);
 242                         }
 243                 }
 244 #else
 245                 mfd->use_mdp_vsync = 0;
 246                 hrtimer_init(&mfd->dma_hrtimer, CLOCK_MONOTONIC,
 247                              HRTIMER_MODE_REL);
 248                 mfd->dma_hrtimer.function = mdp_dma2_vsync_hrtimer_handler;
 249                 mfd->vsync_width_boundary = vmalloc(mfd->panel_info.xres * 4);
 250 #endif
 251
 252                 mfd->channel_irq = 0;
 253                 if (mfd->panel_info.lcd.hw_vsync_mode) {
 254                         u32 vsync_gpio = mfd->vsync_gpio;
 255                         u32 ret;
 256
 257                         if (vsync_gpio == -1) {
 258                                 MSM_FB_INFO("vsync_gpio not defined!\n");
 259                                 goto err_handle;
 260                         }
 261
 262                         ret = gpio_tlmm_config(GPIO_CFG
 263                                         (vsync_gpio,
 264                                         (mfd->use_mdp_vsync) ? 1 : 0,
 265                                         GPIO_INPUT,
 266                                         GPIO_PULL_DOWN,
 267                                         GPIO_2MA),
 268                                         GPIO_ENABLE);
 269                         if (ret)
 270                                 goto err_handle;
 271
 272                         if (!mfd->use_mdp_vsync) {
 273                                 mfd->channel_irq = MSM_GPIO_TO_INT(vsync_gpio);
 274                                 if (request_irq
 275                                     (mfd->channel_irq,
 276                                      &mdp_hw_vsync_handler_proxy,
 277                                      IRQF_TRIGGER_FALLING, "VSYNC_GPIO",
 278                                      (void *)mfd)) {
 279                                         MSM_FB_INFO
 280                                         ("irq=%d failed! vsync_gpio=%d\n",
 281                                                 mfd->channel_irq,
 282                                                 vsync_gpio);
 283                                         goto err_handle;
 284                                 }
 285                         }
 286                 }
 287
 288                 mdp_set_vsync((unsigned long)mfd);
 289         }
 290
 291         return;
 292
 293 err_handle:
 294         if (mfd->vsync_width_boundary)
 295                 vfree(mfd->vsync_width_boundary);
 296         mfd->panel_info.lcd.vsync_enable = FALSE;
 297         printk(KERN_ERR "%s: failed!\n", __func__);
 298 }
 299
 300 void mdp_vsync_resync_workqueue_handler(struct work_struct *work)
 301 {
 302         struct msm_fb_data_type *mfd = NULL;
 303         int vsync_fnc_enabled = FALSE;
 304         struct msm_fb_panel_data *pdata = NULL;
 305
 306         mfd = container_of(work, struct msm_fb_data_type, vsync_resync_worker);
 307
 308         if (mfd) {
 309                 if (mfd->panel_power_on) {
 310                         pdata =
 311                             (struct msm_fb_panel_data *)mfd->pdev->dev.
 312                             platform_data;
 313
 314                         /*
 315                          * we need to turn on MDP power if it uses MDP vsync
 316                          * HW block in SW mode
 317                          */
 318                         if ((!mfd->panel_info.lcd.hw_vsync_mode) &&
 319                             (mfd->use_mdp_vsync) &&
 320                             (pdata) && (pdata->set_vsync_notifier != NULL)) {
 321                                 /*
 322                                  * enable pwr here since we can't enable it in
 323                                  * vsync callback in isr mode
 324                                  */
 325                                 mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
 326                                               FALSE);
 327                         }
 328
 329                         if (pdata->set_vsync_notifier != NULL) {
 330                                 vsync_fnc_enabled = TRUE;
 331                                 pdata->set_vsync_notifier(mdp_vsync_handler,
 332                                                           (void *)mfd);
 333                         }
 334                 }
 335         }
 336
 337         if ((mfd) && (!vsync_fnc_enabled))
 338                 mfd->vsync_handler_pending = FALSE;
 339 }
 340
 341 boolean mdp_hw_vsync_set_handler(msm_fb_vsync_handler_type handler, void *data)
 342 {
 343         /*
 344          * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt
 345          * but getting inaccurate timing in mdp_vsync_handler()
 346          * enable_irq(MDP_HW_VSYNC_IRQ);
 347          */
 348
 349         return TRUE;
 350 }
 351
 352 uint32 mdp_get_lcd_line_counter(struct msm_fb_data_type *mfd)
 353 {
 354         uint32 elapsed_usec_time;
 355         uint32 lcd_line;
 356         ktime_t last_vsync_timetick_local;
 357         ktime_t curr_time;
 358         unsigned long flag;
 359
 360         if ((!mfd->panel_info.lcd.vsync_enable) || (!vsync_mode))
 361                 return 0;
 362
 363         spin_lock_irqsave(&mdp_spin_lock, flag);
 364         last_vsync_timetick_local = mfd->last_vsync_timetick;
 365         spin_unlock_irqrestore(&mdp_spin_lock, flag);
 366
 367         curr_time = ktime_get_real();
 368         elapsed_usec_time =
 369             ((curr_time.tv.sec - last_vsync_timetick_local.tv.sec) * 1000000) +
 370             ((curr_time.tv.nsec - last_vsync_timetick_local.tv.nsec) / 1000);
 371
 372         elapsed_usec_time = elapsed_usec_time % mfd->lcd_ref_usec_time;
 373
 374         /* lcd line calculation referencing to line counter = 0 */
 375         lcd_line =
 376             (elapsed_usec_time * mfd->total_lcd_lines) / mfd->lcd_ref_usec_time;
 377
 378         /* lcd line adjusment referencing to the actual line counter at vsync */
 379         lcd_line =
 380             (mfd->total_lcd_lines - mfd->panel_info.lcd.v_back_porch +
 381              lcd_line) % (mfd->total_lcd_lines + 1);
 382
 383         if (lcd_line > mfd->total_lcd_lines) {
 384                 MSM_FB_INFO
 385                     ("mdp_get_lcd_line_counter: mdp_lcd_rd_cnt >= mfd->total_lcd_lines error!\n");
 386         }
 387
 388         return lcd_line;
 389 }