GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / scsi / fnic / fnic_scsi.c
blob198cbab3e8941e0016720463e1279e9992ec193f
1 /*
2 * Copyright 2008 Cisco Systems, Inc. All rights reserved.
3 * Copyright 2007 Nuova Systems, Inc. All rights reserved.
5 * This program is free software; you may redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; version 2 of the License.
9 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
10 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
11 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
12 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
13 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
14 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
15 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
16 * SOFTWARE.
18 #include <linux/mempool.h>
19 #include <linux/errno.h>
20 #include <linux/init.h>
21 #include <linux/workqueue.h>
22 #include <linux/pci.h>
23 #include <linux/scatterlist.h>
24 #include <linux/skbuff.h>
25 #include <linux/spinlock.h>
26 #include <linux/if_ether.h>
27 #include <linux/if_vlan.h>
28 #include <linux/delay.h>
29 #include <linux/gfp.h>
30 #include <scsi/scsi.h>
31 #include <scsi/scsi_host.h>
32 #include <scsi/scsi_device.h>
33 #include <scsi/scsi_cmnd.h>
34 #include <scsi/scsi_tcq.h>
35 #include <scsi/fc/fc_els.h>
36 #include <scsi/fc/fc_fcoe.h>
37 #include <scsi/libfc.h>
38 #include <scsi/fc_frame.h>
39 #include "fnic_io.h"
40 #include "fnic.h"
42 const char *fnic_state_str[] = {
43 [FNIC_IN_FC_MODE] = "FNIC_IN_FC_MODE",
44 [FNIC_IN_FC_TRANS_ETH_MODE] = "FNIC_IN_FC_TRANS_ETH_MODE",
45 [FNIC_IN_ETH_MODE] = "FNIC_IN_ETH_MODE",
46 [FNIC_IN_ETH_TRANS_FC_MODE] = "FNIC_IN_ETH_TRANS_FC_MODE",
49 static const char *fnic_ioreq_state_str[] = {
50 [FNIC_IOREQ_CMD_PENDING] = "FNIC_IOREQ_CMD_PENDING",
51 [FNIC_IOREQ_ABTS_PENDING] = "FNIC_IOREQ_ABTS_PENDING",
52 [FNIC_IOREQ_ABTS_COMPLETE] = "FNIC_IOREQ_ABTS_COMPLETE",
53 [FNIC_IOREQ_CMD_COMPLETE] = "FNIC_IOREQ_CMD_COMPLETE",
56 static const char *fcpio_status_str[] = {
57 [FCPIO_SUCCESS] = "FCPIO_SUCCESS", /*0x0*/
58 [FCPIO_INVALID_HEADER] = "FCPIO_INVALID_HEADER",
59 [FCPIO_OUT_OF_RESOURCE] = "FCPIO_OUT_OF_RESOURCE",
60 [FCPIO_INVALID_PARAM] = "FCPIO_INVALID_PARAM]",
61 [FCPIO_REQ_NOT_SUPPORTED] = "FCPIO_REQ_NOT_SUPPORTED",
62 [FCPIO_IO_NOT_FOUND] = "FCPIO_IO_NOT_FOUND",
63 [FCPIO_ABORTED] = "FCPIO_ABORTED", /*0x41*/
64 [FCPIO_TIMEOUT] = "FCPIO_TIMEOUT",
65 [FCPIO_SGL_INVALID] = "FCPIO_SGL_INVALID",
66 [FCPIO_MSS_INVALID] = "FCPIO_MSS_INVALID",
67 [FCPIO_DATA_CNT_MISMATCH] = "FCPIO_DATA_CNT_MISMATCH",
68 [FCPIO_FW_ERR] = "FCPIO_FW_ERR",
69 [FCPIO_ITMF_REJECTED] = "FCPIO_ITMF_REJECTED",
70 [FCPIO_ITMF_FAILED] = "FCPIO_ITMF_FAILED",
71 [FCPIO_ITMF_INCORRECT_LUN] = "FCPIO_ITMF_INCORRECT_LUN",
72 [FCPIO_CMND_REJECTED] = "FCPIO_CMND_REJECTED",
73 [FCPIO_NO_PATH_AVAIL] = "FCPIO_NO_PATH_AVAIL",
74 [FCPIO_PATH_FAILED] = "FCPIO_PATH_FAILED",
75 [FCPIO_LUNMAP_CHNG_PEND] = "FCPIO_LUNHMAP_CHNG_PEND",
78 const char *fnic_state_to_str(unsigned int state)
80 if (state >= ARRAY_SIZE(fnic_state_str) || !fnic_state_str[state])
81 return "unknown";
83 return fnic_state_str[state];
86 static const char *fnic_ioreq_state_to_str(unsigned int state)
88 if (state >= ARRAY_SIZE(fnic_ioreq_state_str) ||
89 !fnic_ioreq_state_str[state])
90 return "unknown";
92 return fnic_ioreq_state_str[state];
95 static const char *fnic_fcpio_status_to_str(unsigned int status)
97 if (status >= ARRAY_SIZE(fcpio_status_str) || !fcpio_status_str[status])
98 return "unknown";
100 return fcpio_status_str[status];
103 static void fnic_cleanup_io(struct fnic *fnic, int exclude_id);
105 static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic,
106 struct scsi_cmnd *sc)
108 u32 hash = sc->request->tag & (FNIC_IO_LOCKS - 1);
110 return &fnic->io_req_lock[hash];
114 * Unmap the data buffer and sense buffer for an io_req,
115 * also unmap and free the device-private scatter/gather list.
117 static void fnic_release_ioreq_buf(struct fnic *fnic,
118 struct fnic_io_req *io_req,
119 struct scsi_cmnd *sc)
121 if (io_req->sgl_list_pa)
122 pci_unmap_single(fnic->pdev, io_req->sgl_list_pa,
123 sizeof(io_req->sgl_list[0]) * io_req->sgl_cnt,
124 PCI_DMA_TODEVICE);
125 scsi_dma_unmap(sc);
127 if (io_req->sgl_cnt)
128 mempool_free(io_req->sgl_list_alloc,
129 fnic->io_sgl_pool[io_req->sgl_type]);
130 if (io_req->sense_buf_pa)
131 pci_unmap_single(fnic->pdev, io_req->sense_buf_pa,
132 SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE);
135 /* Free up Copy Wq descriptors. Called with copy_wq lock held */
136 static int free_wq_copy_descs(struct fnic *fnic, struct vnic_wq_copy *wq)
138 /* if no Ack received from firmware, then nothing to clean */
139 if (!fnic->fw_ack_recd[0])
140 return 1;
143 * Update desc_available count based on number of freed descriptors
144 * Account for wraparound
146 if (wq->to_clean_index <= fnic->fw_ack_index[0])
147 wq->ring.desc_avail += (fnic->fw_ack_index[0]
148 - wq->to_clean_index + 1);
149 else
150 wq->ring.desc_avail += (wq->ring.desc_count
151 - wq->to_clean_index
152 + fnic->fw_ack_index[0] + 1);
155 * just bump clean index to ack_index+1 accounting for wraparound
156 * this will essentially free up all descriptors between
157 * to_clean_index and fw_ack_index, both inclusive
159 wq->to_clean_index =
160 (fnic->fw_ack_index[0] + 1) % wq->ring.desc_count;
162 /* we have processed the acks received so far */
163 fnic->fw_ack_recd[0] = 0;
164 return 0;
169 * fnic_fw_reset_handler
170 * Routine to send reset msg to fw
172 int fnic_fw_reset_handler(struct fnic *fnic)
174 struct vnic_wq_copy *wq = &fnic->wq_copy[0];
175 int ret = 0;
176 unsigned long flags;
178 skb_queue_purge(&fnic->frame_queue);
179 skb_queue_purge(&fnic->tx_queue);
181 spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
183 if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
184 free_wq_copy_descs(fnic, wq);
186 if (!vnic_wq_copy_desc_avail(wq))
187 ret = -EAGAIN;
188 else
189 fnic_queue_wq_copy_desc_fw_reset(wq, SCSI_NO_TAG);
191 spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
193 if (!ret)
194 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
195 "Issued fw reset\n");
196 else
197 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
198 "Failed to issue fw reset\n");
199 return ret;
204 * fnic_flogi_reg_handler
205 * Routine to send flogi register msg to fw
207 int fnic_flogi_reg_handler(struct fnic *fnic, u32 fc_id)
209 struct vnic_wq_copy *wq = &fnic->wq_copy[0];
210 enum fcpio_flogi_reg_format_type format;
211 struct fc_lport *lp = fnic->lport;
212 u8 gw_mac[ETH_ALEN];
213 int ret = 0;
214 unsigned long flags;
216 spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
218 if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
219 free_wq_copy_descs(fnic, wq);
221 if (!vnic_wq_copy_desc_avail(wq)) {
222 ret = -EAGAIN;
223 goto flogi_reg_ioreq_end;
226 if (fnic->ctlr.map_dest) {
227 memset(gw_mac, 0xff, ETH_ALEN);
228 format = FCPIO_FLOGI_REG_DEF_DEST;
229 } else {
230 memcpy(gw_mac, fnic->ctlr.dest_addr, ETH_ALEN);
231 format = FCPIO_FLOGI_REG_GW_DEST;
234 if ((fnic->config.flags & VFCF_FIP_CAPABLE) && !fnic->ctlr.map_dest) {
235 fnic_queue_wq_copy_desc_fip_reg(wq, SCSI_NO_TAG,
236 fc_id, gw_mac,
237 fnic->data_src_addr,
238 lp->r_a_tov, lp->e_d_tov);
239 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
240 "FLOGI FIP reg issued fcid %x src %pM dest %pM\n",
241 fc_id, fnic->data_src_addr, gw_mac);
242 } else {
243 fnic_queue_wq_copy_desc_flogi_reg(wq, SCSI_NO_TAG,
244 format, fc_id, gw_mac);
245 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
246 "FLOGI reg issued fcid %x map %d dest %pM\n",
247 fc_id, fnic->ctlr.map_dest, gw_mac);
250 flogi_reg_ioreq_end:
251 spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
252 return ret;
256 * fnic_queue_wq_copy_desc
257 * Routine to enqueue a wq copy desc
259 static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
260 struct vnic_wq_copy *wq,
261 struct fnic_io_req *io_req,
262 struct scsi_cmnd *sc,
263 int sg_count)
265 struct scatterlist *sg;
266 struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
267 struct fc_rport_libfc_priv *rp = rport->dd_data;
268 struct host_sg_desc *desc;
269 u8 pri_tag = 0;
270 unsigned int i;
271 unsigned long intr_flags;
272 int flags;
273 u8 exch_flags;
274 struct scsi_lun fc_lun;
275 char msg[2];
277 if (sg_count) {
278 /* For each SGE, create a device desc entry */
279 desc = io_req->sgl_list;
280 for_each_sg(scsi_sglist(sc), sg, sg_count, i) {
281 desc->addr = cpu_to_le64(sg_dma_address(sg));
282 desc->len = cpu_to_le32(sg_dma_len(sg));
283 desc->_resvd = 0;
284 desc++;
287 io_req->sgl_list_pa = pci_map_single
288 (fnic->pdev,
289 io_req->sgl_list,
290 sizeof(io_req->sgl_list[0]) * sg_count,
291 PCI_DMA_TODEVICE);
294 io_req->sense_buf_pa = pci_map_single(fnic->pdev,
295 sc->sense_buffer,
296 SCSI_SENSE_BUFFERSIZE,
297 PCI_DMA_FROMDEVICE);
299 int_to_scsilun(sc->device->lun, &fc_lun);
301 pri_tag = FCPIO_ICMND_PTA_SIMPLE;
302 msg[0] = MSG_SIMPLE_TAG;
303 scsi_populate_tag_msg(sc, msg);
304 if (msg[0] == MSG_ORDERED_TAG)
305 pri_tag = FCPIO_ICMND_PTA_ORDERED;
307 /* Enqueue the descriptor in the Copy WQ */
308 spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
310 if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
311 free_wq_copy_descs(fnic, wq);
313 if (unlikely(!vnic_wq_copy_desc_avail(wq))) {
314 spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
315 return SCSI_MLQUEUE_HOST_BUSY;
318 flags = 0;
319 if (sc->sc_data_direction == DMA_FROM_DEVICE)
320 flags = FCPIO_ICMND_RDDATA;
321 else if (sc->sc_data_direction == DMA_TO_DEVICE)
322 flags = FCPIO_ICMND_WRDATA;
324 exch_flags = 0;
325 if ((fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR) &&
326 (rp->flags & FC_RP_FLAGS_RETRY))
327 exch_flags |= FCPIO_ICMND_SRFLAG_RETRY;
329 fnic_queue_wq_copy_desc_icmnd_16(wq, sc->request->tag,
330 0, exch_flags, io_req->sgl_cnt,
331 SCSI_SENSE_BUFFERSIZE,
332 io_req->sgl_list_pa,
333 io_req->sense_buf_pa,
334 0, /* scsi cmd ref, always 0 */
335 pri_tag, /* scsi pri and tag */
336 flags, /* command flags */
337 sc->cmnd, sc->cmd_len,
338 scsi_bufflen(sc),
339 fc_lun.scsi_lun, io_req->port_id,
340 rport->maxframe_size, rp->r_a_tov,
341 rp->e_d_tov);
343 spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
344 return 0;
348 * fnic_queuecommand
349 * Routine to send a scsi cdb
350 * Called with host_lock held and interrupts disabled.
352 int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
354 struct fc_lport *lp;
355 struct fc_rport *rport;
356 struct fnic_io_req *io_req;
357 struct fnic *fnic;
358 struct vnic_wq_copy *wq;
359 int ret;
360 int sg_count;
361 unsigned long flags;
362 unsigned long ptr;
364 rport = starget_to_rport(scsi_target(sc->device));
365 ret = fc_remote_port_chkready(rport);
366 if (ret) {
367 sc->result = ret;
368 done(sc);
369 return 0;
372 lp = shost_priv(sc->device->host);
373 if (lp->state != LPORT_ST_READY || !(lp->link_up))
374 return SCSI_MLQUEUE_HOST_BUSY;
377 * Release host lock, use driver resource specific locks from here.
378 * Don't re-enable interrupts in case they were disabled prior to the
379 * caller disabling them.
381 spin_unlock(lp->host->host_lock);
383 /* Get a new io_req for this SCSI IO */
384 fnic = lport_priv(lp);
386 io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC);
387 if (!io_req) {
388 ret = SCSI_MLQUEUE_HOST_BUSY;
389 goto out;
391 memset(io_req, 0, sizeof(*io_req));
393 /* Map the data buffer */
394 sg_count = scsi_dma_map(sc);
395 if (sg_count < 0) {
396 mempool_free(io_req, fnic->io_req_pool);
397 goto out;
400 /* Determine the type of scatter/gather list we need */
401 io_req->sgl_cnt = sg_count;
402 io_req->sgl_type = FNIC_SGL_CACHE_DFLT;
403 if (sg_count > FNIC_DFLT_SG_DESC_CNT)
404 io_req->sgl_type = FNIC_SGL_CACHE_MAX;
406 if (sg_count) {
407 io_req->sgl_list =
408 mempool_alloc(fnic->io_sgl_pool[io_req->sgl_type],
409 GFP_ATOMIC | GFP_DMA);
410 if (!io_req->sgl_list) {
411 ret = SCSI_MLQUEUE_HOST_BUSY;
412 scsi_dma_unmap(sc);
413 mempool_free(io_req, fnic->io_req_pool);
414 goto out;
417 /* Cache sgl list allocated address before alignment */
418 io_req->sgl_list_alloc = io_req->sgl_list;
419 ptr = (unsigned long) io_req->sgl_list;
420 if (ptr % FNIC_SG_DESC_ALIGN) {
421 io_req->sgl_list = (struct host_sg_desc *)
422 (((unsigned long) ptr
423 + FNIC_SG_DESC_ALIGN - 1)
424 & ~(FNIC_SG_DESC_ALIGN - 1));
428 /* initialize rest of io_req */
429 io_req->port_id = rport->port_id;
430 CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING;
431 CMD_SP(sc) = (char *)io_req;
432 sc->scsi_done = done;
434 /* create copy wq desc and enqueue it */
435 wq = &fnic->wq_copy[0];
436 ret = fnic_queue_wq_copy_desc(fnic, wq, io_req, sc, sg_count);
437 if (ret) {
439 * In case another thread cancelled the request,
440 * refetch the pointer under the lock.
442 spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc);
444 spin_lock_irqsave(io_lock, flags);
445 io_req = (struct fnic_io_req *)CMD_SP(sc);
446 CMD_SP(sc) = NULL;
447 CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
448 spin_unlock_irqrestore(io_lock, flags);
449 if (io_req) {
450 fnic_release_ioreq_buf(fnic, io_req, sc);
451 mempool_free(io_req, fnic->io_req_pool);
454 out:
455 /* acquire host lock before returning to SCSI */
456 spin_lock(lp->host->host_lock);
457 return ret;
461 * fnic_fcpio_fw_reset_cmpl_handler
462 * Routine to handle fw reset completion
464 static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic,
465 struct fcpio_fw_req *desc)
467 u8 type;
468 u8 hdr_status;
469 struct fcpio_tag tag;
470 int ret = 0;
471 unsigned long flags;
473 fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
475 /* Clean up all outstanding io requests */
476 fnic_cleanup_io(fnic, SCSI_NO_TAG);
478 spin_lock_irqsave(&fnic->fnic_lock, flags);
480 /* fnic should be in FC_TRANS_ETH_MODE */
481 if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) {
482 /* Check status of reset completion */
483 if (!hdr_status) {
484 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
485 "reset cmpl success\n");
486 /* Ready to send flogi out */
487 fnic->state = FNIC_IN_ETH_MODE;
488 } else {
489 FNIC_SCSI_DBG(KERN_DEBUG,
490 fnic->lport->host,
491 "fnic fw_reset : failed %s\n",
492 fnic_fcpio_status_to_str(hdr_status));
495 * Unable to change to eth mode, cannot send out flogi
496 * Change state to fc mode, so that subsequent Flogi
497 * requests from libFC will cause more attempts to
498 * reset the firmware. Free the cached flogi
500 fnic->state = FNIC_IN_FC_MODE;
501 ret = -1;
503 } else {
504 FNIC_SCSI_DBG(KERN_DEBUG,
505 fnic->lport->host,
506 "Unexpected state %s while processing"
507 " reset cmpl\n", fnic_state_to_str(fnic->state));
508 ret = -1;
511 /* Thread removing device blocks till firmware reset is complete */
512 if (fnic->remove_wait)
513 complete(fnic->remove_wait);
516 * If fnic is being removed, or fw reset failed
517 * free the flogi frame. Else, send it out
519 if (fnic->remove_wait || ret) {
520 spin_unlock_irqrestore(&fnic->fnic_lock, flags);
521 skb_queue_purge(&fnic->tx_queue);
522 goto reset_cmpl_handler_end;
525 spin_unlock_irqrestore(&fnic->fnic_lock, flags);
527 fnic_flush_tx(fnic);
529 reset_cmpl_handler_end:
530 return ret;
534 * fnic_fcpio_flogi_reg_cmpl_handler
535 * Routine to handle flogi register completion
537 static int fnic_fcpio_flogi_reg_cmpl_handler(struct fnic *fnic,
538 struct fcpio_fw_req *desc)
540 u8 type;
541 u8 hdr_status;
542 struct fcpio_tag tag;
543 int ret = 0;
544 unsigned long flags;
546 fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
548 /* Update fnic state based on status of flogi reg completion */
549 spin_lock_irqsave(&fnic->fnic_lock, flags);
551 if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) {
553 /* Check flogi registration completion status */
554 if (!hdr_status) {
555 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
556 "flog reg succeeded\n");
557 fnic->state = FNIC_IN_FC_MODE;
558 } else {
559 FNIC_SCSI_DBG(KERN_DEBUG,
560 fnic->lport->host,
561 "fnic flogi reg :failed %s\n",
562 fnic_fcpio_status_to_str(hdr_status));
563 fnic->state = FNIC_IN_ETH_MODE;
564 ret = -1;
566 } else {
567 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
568 "Unexpected fnic state %s while"
569 " processing flogi reg completion\n",
570 fnic_state_to_str(fnic->state));
571 ret = -1;
574 if (!ret) {
575 if (fnic->stop_rx_link_events) {
576 spin_unlock_irqrestore(&fnic->fnic_lock, flags);
577 goto reg_cmpl_handler_end;
579 spin_unlock_irqrestore(&fnic->fnic_lock, flags);
581 fnic_flush_tx(fnic);
582 queue_work(fnic_event_queue, &fnic->frame_work);
583 } else {
584 spin_unlock_irqrestore(&fnic->fnic_lock, flags);
587 reg_cmpl_handler_end:
588 return ret;
591 static inline int is_ack_index_in_range(struct vnic_wq_copy *wq,
592 u16 request_out)
594 if (wq->to_clean_index <= wq->to_use_index) {
595 /* out of range, stale request_out index */
596 if (request_out < wq->to_clean_index ||
597 request_out >= wq->to_use_index)
598 return 0;
599 } else {
600 /* out of range, stale request_out index */
601 if (request_out < wq->to_clean_index &&
602 request_out >= wq->to_use_index)
603 return 0;
605 /* request_out index is in range */
606 return 1;
611 * Mark that ack received and store the Ack index. If there are multiple
612 * acks received before Tx thread cleans it up, the latest value will be
613 * used which is correct behavior. This state should be in the copy Wq
614 * instead of in the fnic
616 static inline void fnic_fcpio_ack_handler(struct fnic *fnic,
617 unsigned int cq_index,
618 struct fcpio_fw_req *desc)
620 struct vnic_wq_copy *wq;
621 u16 request_out = desc->u.ack.request_out;
622 unsigned long flags;
624 /* mark the ack state */
625 wq = &fnic->wq_copy[cq_index - fnic->raw_wq_count - fnic->rq_count];
626 spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
628 if (is_ack_index_in_range(wq, request_out)) {
629 fnic->fw_ack_index[0] = request_out;
630 fnic->fw_ack_recd[0] = 1;
632 spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
636 * fnic_fcpio_icmnd_cmpl_handler
637 * Routine to handle icmnd completions
639 static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
640 struct fcpio_fw_req *desc)
642 u8 type;
643 u8 hdr_status;
644 struct fcpio_tag tag;
645 u32 id;
646 u64 xfer_len = 0;
647 struct fcpio_icmnd_cmpl *icmnd_cmpl;
648 struct fnic_io_req *io_req;
649 struct scsi_cmnd *sc;
650 unsigned long flags;
651 spinlock_t *io_lock;
653 /* Decode the cmpl description to get the io_req id */
654 fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
655 fcpio_tag_id_dec(&tag, &id);
657 if (id >= FNIC_MAX_IO_REQ)
658 return;
660 sc = scsi_host_find_tag(fnic->lport->host, id);
661 WARN_ON_ONCE(!sc);
662 if (!sc)
663 return;
665 io_lock = fnic_io_lock_hash(fnic, sc);
666 spin_lock_irqsave(io_lock, flags);
667 io_req = (struct fnic_io_req *)CMD_SP(sc);
668 WARN_ON_ONCE(!io_req);
669 if (!io_req) {
670 spin_unlock_irqrestore(io_lock, flags);
671 return;
674 /* firmware completed the io */
675 io_req->io_completed = 1;
678 * if SCSI-ML has already issued abort on this command,
679 * ignore completion of the IO. The abts path will clean it up
681 if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
682 spin_unlock_irqrestore(io_lock, flags);
683 return;
686 /* Mark the IO as complete */
687 CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
689 icmnd_cmpl = &desc->u.icmnd_cmpl;
691 switch (hdr_status) {
692 case FCPIO_SUCCESS:
693 sc->result = (DID_OK << 16) | icmnd_cmpl->scsi_status;
694 xfer_len = scsi_bufflen(sc);
695 scsi_set_resid(sc, icmnd_cmpl->residual);
697 if (icmnd_cmpl->flags & FCPIO_ICMND_CMPL_RESID_UNDER)
698 xfer_len -= icmnd_cmpl->residual;
701 * If queue_full, then try to reduce queue depth for all
702 * LUNS on the target. Todo: this should be accompanied
703 * by a periodic queue_depth rampup based on successful
704 * IO completion.
706 if (icmnd_cmpl->scsi_status == QUEUE_FULL) {
707 struct scsi_device *t_sdev;
708 int qd = 0;
710 shost_for_each_device(t_sdev, sc->device->host) {
711 if (t_sdev->id != sc->device->id)
712 continue;
714 if (t_sdev->queue_depth > 1) {
715 qd = scsi_track_queue_full
716 (t_sdev,
717 t_sdev->queue_depth - 1);
718 if (qd == -1)
719 qd = t_sdev->host->cmd_per_lun;
720 shost_printk(KERN_INFO,
721 fnic->lport->host,
722 "scsi[%d:%d:%d:%d"
723 "] queue full detected,"
724 "new depth = %d\n",
725 t_sdev->host->host_no,
726 t_sdev->channel,
727 t_sdev->id, t_sdev->lun,
728 t_sdev->queue_depth);
732 break;
734 case FCPIO_TIMEOUT: /* request was timed out */
735 sc->result = (DID_TIME_OUT << 16) | icmnd_cmpl->scsi_status;
736 break;
738 case FCPIO_ABORTED: /* request was aborted */
739 sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
740 break;
742 case FCPIO_DATA_CNT_MISMATCH: /* recv/sent more/less data than exp. */
743 scsi_set_resid(sc, icmnd_cmpl->residual);
744 sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
745 break;
747 case FCPIO_OUT_OF_RESOURCE: /* out of resources to complete request */
748 sc->result = (DID_REQUEUE << 16) | icmnd_cmpl->scsi_status;
749 break;
750 case FCPIO_INVALID_HEADER: /* header contains invalid data */
751 case FCPIO_INVALID_PARAM: /* some parameter in request invalid */
752 case FCPIO_REQ_NOT_SUPPORTED:/* request type is not supported */
753 case FCPIO_IO_NOT_FOUND: /* requested I/O was not found */
754 case FCPIO_SGL_INVALID: /* request was aborted due to sgl error */
755 case FCPIO_MSS_INVALID: /* request was aborted due to mss error */
756 case FCPIO_FW_ERR: /* request was terminated due fw error */
757 default:
758 shost_printk(KERN_ERR, fnic->lport->host, "hdr status = %s\n",
759 fnic_fcpio_status_to_str(hdr_status));
760 sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
761 break;
764 /* Break link with the SCSI command */
765 CMD_SP(sc) = NULL;
767 spin_unlock_irqrestore(io_lock, flags);
769 fnic_release_ioreq_buf(fnic, io_req, sc);
771 mempool_free(io_req, fnic->io_req_pool);
773 if (sc->sc_data_direction == DMA_FROM_DEVICE) {
774 fnic->lport->host_stats.fcp_input_requests++;
775 fnic->fcp_input_bytes += xfer_len;
776 } else if (sc->sc_data_direction == DMA_TO_DEVICE) {
777 fnic->lport->host_stats.fcp_output_requests++;
778 fnic->fcp_output_bytes += xfer_len;
779 } else
780 fnic->lport->host_stats.fcp_control_requests++;
782 /* Call SCSI completion function to complete the IO */
783 if (sc->scsi_done)
784 sc->scsi_done(sc);
788 /* fnic_fcpio_itmf_cmpl_handler
789 * Routine to handle itmf completions
791 static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
792 struct fcpio_fw_req *desc)
794 u8 type;
795 u8 hdr_status;
796 struct fcpio_tag tag;
797 u32 id;
798 struct scsi_cmnd *sc;
799 struct fnic_io_req *io_req;
800 unsigned long flags;
801 spinlock_t *io_lock;
803 fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
804 fcpio_tag_id_dec(&tag, &id);
806 if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ)
807 return;
809 sc = scsi_host_find_tag(fnic->lport->host, id & FNIC_TAG_MASK);
810 WARN_ON_ONCE(!sc);
811 if (!sc)
812 return;
814 io_lock = fnic_io_lock_hash(fnic, sc);
815 spin_lock_irqsave(io_lock, flags);
816 io_req = (struct fnic_io_req *)CMD_SP(sc);
817 WARN_ON_ONCE(!io_req);
818 if (!io_req) {
819 spin_unlock_irqrestore(io_lock, flags);
820 return;
823 if (id & FNIC_TAG_ABORT) {
824 /* Completion of abort cmd */
825 if (CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING) {
826 /* This is a late completion. Ignore it */
827 spin_unlock_irqrestore(io_lock, flags);
828 return;
830 CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
831 CMD_ABTS_STATUS(sc) = hdr_status;
833 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
834 "abts cmpl recd. id %d status %s\n",
835 (int)(id & FNIC_TAG_MASK),
836 fnic_fcpio_status_to_str(hdr_status));
839 * If scsi_eh thread is blocked waiting for abts to complete,
840 * signal completion to it. IO will be cleaned in the thread
841 * else clean it in this context
843 if (io_req->abts_done) {
844 complete(io_req->abts_done);
845 spin_unlock_irqrestore(io_lock, flags);
846 } else {
847 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
848 "abts cmpl, completing IO\n");
849 CMD_SP(sc) = NULL;
850 sc->result = (DID_ERROR << 16);
852 spin_unlock_irqrestore(io_lock, flags);
854 fnic_release_ioreq_buf(fnic, io_req, sc);
855 mempool_free(io_req, fnic->io_req_pool);
856 if (sc->scsi_done)
857 sc->scsi_done(sc);
860 } else if (id & FNIC_TAG_DEV_RST) {
861 /* Completion of device reset */
862 CMD_LR_STATUS(sc) = hdr_status;
863 CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
864 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
865 "dev reset cmpl recd. id %d status %s\n",
866 (int)(id & FNIC_TAG_MASK),
867 fnic_fcpio_status_to_str(hdr_status));
868 if (io_req->dr_done)
869 complete(io_req->dr_done);
870 spin_unlock_irqrestore(io_lock, flags);
872 } else {
873 shost_printk(KERN_ERR, fnic->lport->host,
874 "Unexpected itmf io state %s tag %x\n",
875 fnic_ioreq_state_to_str(CMD_STATE(sc)), id);
876 spin_unlock_irqrestore(io_lock, flags);
882 * fnic_fcpio_cmpl_handler
883 * Routine to service the cq for wq_copy
885 static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev,
886 unsigned int cq_index,
887 struct fcpio_fw_req *desc)
889 struct fnic *fnic = vnic_dev_priv(vdev);
890 int ret = 0;
892 switch (desc->hdr.type) {
893 case FCPIO_ACK: /* fw copied copy wq desc to its queue */
894 fnic_fcpio_ack_handler(fnic, cq_index, desc);
895 break;
897 case FCPIO_ICMND_CMPL: /* fw completed a command */
898 fnic_fcpio_icmnd_cmpl_handler(fnic, desc);
899 break;
901 case FCPIO_ITMF_CMPL: /* fw completed itmf (abort cmd, lun reset)*/
902 fnic_fcpio_itmf_cmpl_handler(fnic, desc);
903 break;
905 case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */
906 case FCPIO_FLOGI_FIP_REG_CMPL: /* fw completed flogi_fip_reg */
907 ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc);
908 break;
910 case FCPIO_RESET_CMPL: /* fw completed reset */
911 ret = fnic_fcpio_fw_reset_cmpl_handler(fnic, desc);
912 break;
914 default:
915 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
916 "firmware completion type %d\n",
917 desc->hdr.type);
918 break;
921 return ret;
925 * fnic_wq_copy_cmpl_handler
926 * Routine to process wq copy
928 int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do)
930 unsigned int wq_work_done = 0;
931 unsigned int i, cq_index;
932 unsigned int cur_work_done;
934 for (i = 0; i < fnic->wq_copy_count; i++) {
935 cq_index = i + fnic->raw_wq_count + fnic->rq_count;
936 cur_work_done = vnic_cq_copy_service(&fnic->cq[cq_index],
937 fnic_fcpio_cmpl_handler,
938 copy_work_to_do);
939 wq_work_done += cur_work_done;
941 return wq_work_done;
944 static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
946 unsigned int i;
947 struct fnic_io_req *io_req;
948 unsigned long flags = 0;
949 struct scsi_cmnd *sc;
950 spinlock_t *io_lock;
952 for (i = 0; i < FNIC_MAX_IO_REQ; i++) {
953 if (i == exclude_id)
954 continue;
956 sc = scsi_host_find_tag(fnic->lport->host, i);
957 if (!sc)
958 continue;
960 io_lock = fnic_io_lock_hash(fnic, sc);
961 spin_lock_irqsave(io_lock, flags);
962 io_req = (struct fnic_io_req *)CMD_SP(sc);
963 if (!io_req) {
964 spin_unlock_irqrestore(io_lock, flags);
965 goto cleanup_scsi_cmd;
968 CMD_SP(sc) = NULL;
970 spin_unlock_irqrestore(io_lock, flags);
973 * If there is a scsi_cmnd associated with this io_req, then
974 * free the corresponding state
976 fnic_release_ioreq_buf(fnic, io_req, sc);
977 mempool_free(io_req, fnic->io_req_pool);
979 cleanup_scsi_cmd:
980 sc->result = DID_TRANSPORT_DISRUPTED << 16;
981 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "fnic_cleanup_io:"
982 " DID_TRANSPORT_DISRUPTED\n");
984 /* Complete the command to SCSI */
985 if (sc->scsi_done)
986 sc->scsi_done(sc);
990 void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
991 struct fcpio_host_req *desc)
993 u32 id;
994 struct fnic *fnic = vnic_dev_priv(wq->vdev);
995 struct fnic_io_req *io_req;
996 struct scsi_cmnd *sc;
997 unsigned long flags;
998 spinlock_t *io_lock;
1000 /* get the tag reference */
1001 fcpio_tag_id_dec(&desc->hdr.tag, &id);
1002 id &= FNIC_TAG_MASK;
1004 if (id >= FNIC_MAX_IO_REQ)
1005 return;
1007 sc = scsi_host_find_tag(fnic->lport->host, id);
1008 if (!sc)
1009 return;
1011 io_lock = fnic_io_lock_hash(fnic, sc);
1012 spin_lock_irqsave(io_lock, flags);
1014 /* Get the IO context which this desc refers to */
1015 io_req = (struct fnic_io_req *)CMD_SP(sc);
1017 /* fnic interrupts are turned off by now */
1019 if (!io_req) {
1020 spin_unlock_irqrestore(io_lock, flags);
1021 goto wq_copy_cleanup_scsi_cmd;
1024 CMD_SP(sc) = NULL;
1026 spin_unlock_irqrestore(io_lock, flags);
1028 fnic_release_ioreq_buf(fnic, io_req, sc);
1029 mempool_free(io_req, fnic->io_req_pool);
1031 wq_copy_cleanup_scsi_cmd:
1032 sc->result = DID_NO_CONNECT << 16;
1033 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "wq_copy_cleanup_handler:"
1034 " DID_NO_CONNECT\n");
1036 if (sc->scsi_done)
1037 sc->scsi_done(sc);
1040 static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag,
1041 u32 task_req, u8 *fc_lun,
1042 struct fnic_io_req *io_req)
1044 struct vnic_wq_copy *wq = &fnic->wq_copy[0];
1045 unsigned long flags;
1047 spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
1049 if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
1050 free_wq_copy_descs(fnic, wq);
1052 if (!vnic_wq_copy_desc_avail(wq)) {
1053 spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
1054 return 1;
1056 fnic_queue_wq_copy_desc_itmf(wq, tag | FNIC_TAG_ABORT,
1057 0, task_req, tag, fc_lun, io_req->port_id,
1058 fnic->config.ra_tov, fnic->config.ed_tov);
1060 spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
1061 return 0;
1064 void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
1066 int tag;
1067 struct fnic_io_req *io_req;
1068 spinlock_t *io_lock;
1069 unsigned long flags;
1070 struct scsi_cmnd *sc;
1071 struct scsi_lun fc_lun;
1072 enum fnic_ioreq_state old_ioreq_state;
1074 FNIC_SCSI_DBG(KERN_DEBUG,
1075 fnic->lport->host,
1076 "fnic_rport_reset_exch called portid 0x%06x\n",
1077 port_id);
1079 if (fnic->in_remove)
1080 return;
1082 for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
1083 sc = scsi_host_find_tag(fnic->lport->host, tag);
1084 if (!sc)
1085 continue;
1087 io_lock = fnic_io_lock_hash(fnic, sc);
1088 spin_lock_irqsave(io_lock, flags);
1090 io_req = (struct fnic_io_req *)CMD_SP(sc);
1092 if (!io_req || io_req->port_id != port_id) {
1093 spin_unlock_irqrestore(io_lock, flags);
1094 continue;
1098 * Found IO that is still pending with firmware and
1099 * belongs to rport that went away
1101 if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
1102 spin_unlock_irqrestore(io_lock, flags);
1103 continue;
1105 old_ioreq_state = CMD_STATE(sc);
1106 CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
1107 CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
1109 BUG_ON(io_req->abts_done);
1111 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
1112 "fnic_rport_reset_exch: Issuing abts\n");
1114 spin_unlock_irqrestore(io_lock, flags);
1116 /* Now queue the abort command to firmware */
1117 int_to_scsilun(sc->device->lun, &fc_lun);
1119 if (fnic_queue_abort_io_req(fnic, tag,
1120 FCPIO_ITMF_ABT_TASK_TERM,
1121 fc_lun.scsi_lun, io_req)) {
1123 * Revert the cmd state back to old state, if
1124 * it hasnt changed in between. This cmd will get
1125 * aborted later by scsi_eh, or cleaned up during
1126 * lun reset
1128 io_lock = fnic_io_lock_hash(fnic, sc);
1130 spin_lock_irqsave(io_lock, flags);
1131 if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
1132 CMD_STATE(sc) = old_ioreq_state;
1133 spin_unlock_irqrestore(io_lock, flags);
1139 void fnic_terminate_rport_io(struct fc_rport *rport)
1141 int tag;
1142 struct fnic_io_req *io_req;
1143 spinlock_t *io_lock;
1144 unsigned long flags;
1145 struct scsi_cmnd *sc;
1146 struct scsi_lun fc_lun;
1147 struct fc_rport_libfc_priv *rdata = rport->dd_data;
1148 struct fc_lport *lport = rdata->local_port;
1149 struct fnic *fnic = lport_priv(lport);
1150 struct fc_rport *cmd_rport;
1151 enum fnic_ioreq_state old_ioreq_state;
1153 FNIC_SCSI_DBG(KERN_DEBUG,
1154 fnic->lport->host, "fnic_terminate_rport_io called"
1155 " wwpn 0x%llx, wwnn0x%llx, portid 0x%06x\n",
1156 rport->port_name, rport->node_name,
1157 rport->port_id);
1159 if (fnic->in_remove)
1160 return;
1162 for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
1163 sc = scsi_host_find_tag(fnic->lport->host, tag);
1164 if (!sc)
1165 continue;
1167 cmd_rport = starget_to_rport(scsi_target(sc->device));
1168 if (rport != cmd_rport)
1169 continue;
1171 io_lock = fnic_io_lock_hash(fnic, sc);
1172 spin_lock_irqsave(io_lock, flags);
1174 io_req = (struct fnic_io_req *)CMD_SP(sc);
1176 if (!io_req || rport != cmd_rport) {
1177 spin_unlock_irqrestore(io_lock, flags);
1178 continue;
1182 * Found IO that is still pending with firmware and
1183 * belongs to rport that went away
1185 if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
1186 spin_unlock_irqrestore(io_lock, flags);
1187 continue;
1189 old_ioreq_state = CMD_STATE(sc);
1190 CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
1191 CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
1193 BUG_ON(io_req->abts_done);
1195 FNIC_SCSI_DBG(KERN_DEBUG,
1196 fnic->lport->host,
1197 "fnic_terminate_rport_io: Issuing abts\n");
1199 spin_unlock_irqrestore(io_lock, flags);
1201 /* Now queue the abort command to firmware */
1202 int_to_scsilun(sc->device->lun, &fc_lun);
1204 if (fnic_queue_abort_io_req(fnic, tag,
1205 FCPIO_ITMF_ABT_TASK_TERM,
1206 fc_lun.scsi_lun, io_req)) {
1208 * Revert the cmd state back to old state, if
1209 * it hasnt changed in between. This cmd will get
1210 * aborted later by scsi_eh, or cleaned up during
1211 * lun reset
1213 io_lock = fnic_io_lock_hash(fnic, sc);
1215 spin_lock_irqsave(io_lock, flags);
1216 if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
1217 CMD_STATE(sc) = old_ioreq_state;
1218 spin_unlock_irqrestore(io_lock, flags);
1225 * This function is exported to SCSI for sending abort cmnds.
1226 * A SCSI IO is represented by a io_req in the driver.
1227 * The ioreq is linked to the SCSI Cmd, thus a link with the ULP's IO.
1229 int fnic_abort_cmd(struct scsi_cmnd *sc)
1231 struct fc_lport *lp;
1232 struct fnic *fnic;
1233 struct fnic_io_req *io_req;
1234 struct fc_rport *rport;
1235 spinlock_t *io_lock;
1236 unsigned long flags;
1237 int ret = SUCCESS;
1238 u32 task_req;
1239 struct scsi_lun fc_lun;
1240 DECLARE_COMPLETION_ONSTACK(tm_done);
1242 /* Wait for rport to unblock */
1243 fc_block_scsi_eh(sc);
1245 /* Get local-port, check ready and link up */
1246 lp = shost_priv(sc->device->host);
1248 fnic = lport_priv(lp);
1249 rport = starget_to_rport(scsi_target(sc->device));
1250 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
1251 "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n",
1252 rport->port_id, sc->device->lun, sc->request->tag);
1254 if (lp->state != LPORT_ST_READY || !(lp->link_up)) {
1255 ret = FAILED;
1256 goto fnic_abort_cmd_end;
1260 * Avoid a race between SCSI issuing the abort and the device
1261 * completing the command.
1263 * If the command is already completed by the fw cmpl code,
1264 * we just return SUCCESS from here. This means that the abort
1265 * succeeded. In the SCSI ML, since the timeout for command has
1266 * happened, the completion wont actually complete the command
1267 * and it will be considered as an aborted command
1269 * The CMD_SP will not be cleared except while holding io_req_lock.
1271 io_lock = fnic_io_lock_hash(fnic, sc);
1272 spin_lock_irqsave(io_lock, flags);
1273 io_req = (struct fnic_io_req *)CMD_SP(sc);
1274 if (!io_req) {
1275 spin_unlock_irqrestore(io_lock, flags);
1276 goto fnic_abort_cmd_end;
1279 io_req->abts_done = &tm_done;
1281 if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
1282 spin_unlock_irqrestore(io_lock, flags);
1283 goto wait_pending;
1286 * Command is still pending, need to abort it
1287 * If the firmware completes the command after this point,
1288 * the completion wont be done till mid-layer, since abort
1289 * has already started.
1291 CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
1292 CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
1294 spin_unlock_irqrestore(io_lock, flags);
1297 * Check readiness of the remote port. If the path to remote
1298 * port is up, then send abts to the remote port to terminate
1299 * the IO. Else, just locally terminate the IO in the firmware
1301 if (fc_remote_port_chkready(rport) == 0)
1302 task_req = FCPIO_ITMF_ABT_TASK;
1303 else
1304 task_req = FCPIO_ITMF_ABT_TASK_TERM;
1306 /* Now queue the abort command to firmware */
1307 int_to_scsilun(sc->device->lun, &fc_lun);
1309 if (fnic_queue_abort_io_req(fnic, sc->request->tag, task_req,
1310 fc_lun.scsi_lun, io_req)) {
1311 spin_lock_irqsave(io_lock, flags);
1312 io_req = (struct fnic_io_req *)CMD_SP(sc);
1313 if (io_req)
1314 io_req->abts_done = NULL;
1315 spin_unlock_irqrestore(io_lock, flags);
1316 ret = FAILED;
1317 goto fnic_abort_cmd_end;
1321 * We queued an abort IO, wait for its completion.
1322 * Once the firmware completes the abort command, it will
1323 * wake up this thread.
1325 wait_pending:
1326 wait_for_completion_timeout(&tm_done,
1327 msecs_to_jiffies
1328 (2 * fnic->config.ra_tov +
1329 fnic->config.ed_tov));
1331 /* Check the abort status */
1332 spin_lock_irqsave(io_lock, flags);
1334 io_req = (struct fnic_io_req *)CMD_SP(sc);
1335 if (!io_req) {
1336 spin_unlock_irqrestore(io_lock, flags);
1337 ret = FAILED;
1338 goto fnic_abort_cmd_end;
1340 io_req->abts_done = NULL;
1342 /* fw did not complete abort, timed out */
1343 if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
1344 spin_unlock_irqrestore(io_lock, flags);
1345 ret = FAILED;
1346 goto fnic_abort_cmd_end;
1350 * firmware completed the abort, check the status,
1351 * free the io_req irrespective of failure or success
1353 if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS)
1354 ret = FAILED;
1356 CMD_SP(sc) = NULL;
1358 spin_unlock_irqrestore(io_lock, flags);
1360 fnic_release_ioreq_buf(fnic, io_req, sc);
1361 mempool_free(io_req, fnic->io_req_pool);
1363 fnic_abort_cmd_end:
1364 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
1365 "Returning from abort cmd %s\n",
1366 (ret == SUCCESS) ?
1367 "SUCCESS" : "FAILED");
1368 return ret;
1371 static inline int fnic_queue_dr_io_req(struct fnic *fnic,
1372 struct scsi_cmnd *sc,
1373 struct fnic_io_req *io_req)
1375 struct vnic_wq_copy *wq = &fnic->wq_copy[0];
1376 struct scsi_lun fc_lun;
1377 int ret = 0;
1378 unsigned long intr_flags;
1380 spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
1382 if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
1383 free_wq_copy_descs(fnic, wq);
1385 if (!vnic_wq_copy_desc_avail(wq)) {
1386 ret = -EAGAIN;
1387 goto lr_io_req_end;
1390 /* fill in the lun info */
1391 int_to_scsilun(sc->device->lun, &fc_lun);
1393 fnic_queue_wq_copy_desc_itmf(wq, sc->request->tag | FNIC_TAG_DEV_RST,
1394 0, FCPIO_ITMF_LUN_RESET, SCSI_NO_TAG,
1395 fc_lun.scsi_lun, io_req->port_id,
1396 fnic->config.ra_tov, fnic->config.ed_tov);
1398 lr_io_req_end:
1399 spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
1401 return ret;
1405 * Clean up any pending aborts on the lun
1406 * For each outstanding IO on this lun, whose abort is not completed by fw,
1407 * issue a local abort. Wait for abort to complete. Return 0 if all commands
1408 * successfully aborted, 1 otherwise
1410 static int fnic_clean_pending_aborts(struct fnic *fnic,
1411 struct scsi_cmnd *lr_sc)
1413 int tag;
1414 struct fnic_io_req *io_req;
1415 spinlock_t *io_lock;
1416 unsigned long flags;
1417 int ret = 0;
1418 struct scsi_cmnd *sc;
1419 struct scsi_lun fc_lun;
1420 struct scsi_device *lun_dev = lr_sc->device;
1421 DECLARE_COMPLETION_ONSTACK(tm_done);
1423 for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
1424 sc = scsi_host_find_tag(fnic->lport->host, tag);
1426 * ignore this lun reset cmd or cmds that do not belong to
1427 * this lun
1429 if (!sc || sc == lr_sc || sc->device != lun_dev)
1430 continue;
1432 io_lock = fnic_io_lock_hash(fnic, sc);
1433 spin_lock_irqsave(io_lock, flags);
1435 io_req = (struct fnic_io_req *)CMD_SP(sc);
1437 if (!io_req || sc->device != lun_dev) {
1438 spin_unlock_irqrestore(io_lock, flags);
1439 continue;
1443 * Found IO that is still pending with firmware and
1444 * belongs to the LUN that we are resetting
1446 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
1447 "Found IO in %s on lun\n",
1448 fnic_ioreq_state_to_str(CMD_STATE(sc)));
1450 BUG_ON(CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING);
1452 CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
1453 io_req->abts_done = &tm_done;
1454 spin_unlock_irqrestore(io_lock, flags);
1456 /* Now queue the abort command to firmware */
1457 int_to_scsilun(sc->device->lun, &fc_lun);
1459 if (fnic_queue_abort_io_req(fnic, tag,
1460 FCPIO_ITMF_ABT_TASK_TERM,
1461 fc_lun.scsi_lun, io_req)) {
1462 spin_lock_irqsave(io_lock, flags);
1463 io_req = (struct fnic_io_req *)CMD_SP(sc);
1464 if (io_req)
1465 io_req->abts_done = NULL;
1466 spin_unlock_irqrestore(io_lock, flags);
1467 ret = 1;
1468 goto clean_pending_aborts_end;
1471 wait_for_completion_timeout(&tm_done,
1472 msecs_to_jiffies
1473 (fnic->config.ed_tov));
1475 /* Recheck cmd state to check if it is now aborted */
1476 spin_lock_irqsave(io_lock, flags);
1477 io_req = (struct fnic_io_req *)CMD_SP(sc);
1478 if (!io_req) {
1479 spin_unlock_irqrestore(io_lock, flags);
1480 ret = 1;
1481 goto clean_pending_aborts_end;
1484 io_req->abts_done = NULL;
1486 /* if abort is still pending with fw, fail */
1487 if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
1488 spin_unlock_irqrestore(io_lock, flags);
1489 ret = 1;
1490 goto clean_pending_aborts_end;
1492 CMD_SP(sc) = NULL;
1493 spin_unlock_irqrestore(io_lock, flags);
1495 fnic_release_ioreq_buf(fnic, io_req, sc);
1496 mempool_free(io_req, fnic->io_req_pool);
1499 clean_pending_aborts_end:
1500 return ret;
1504 * SCSI Eh thread issues a Lun Reset when one or more commands on a LUN
1505 * fail to get aborted. It calls driver's eh_device_reset with a SCSI command
1506 * on the LUN.
1508 int fnic_device_reset(struct scsi_cmnd *sc)
1510 struct fc_lport *lp;
1511 struct fnic *fnic;
1512 struct fnic_io_req *io_req;
1513 struct fc_rport *rport;
1514 int status;
1515 int ret = FAILED;
1516 spinlock_t *io_lock;
1517 unsigned long flags;
1518 DECLARE_COMPLETION_ONSTACK(tm_done);
1520 /* Wait for rport to unblock */
1521 fc_block_scsi_eh(sc);
1523 /* Get local-port, check ready and link up */
1524 lp = shost_priv(sc->device->host);
1526 fnic = lport_priv(lp);
1528 rport = starget_to_rport(scsi_target(sc->device));
1529 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
1530 "Device reset called FCID 0x%x, LUN 0x%x\n",
1531 rport->port_id, sc->device->lun);
1533 if (lp->state != LPORT_ST_READY || !(lp->link_up))
1534 goto fnic_device_reset_end;
1536 /* Check if remote port up */
1537 if (fc_remote_port_chkready(rport))
1538 goto fnic_device_reset_end;
1540 io_lock = fnic_io_lock_hash(fnic, sc);
1541 spin_lock_irqsave(io_lock, flags);
1542 io_req = (struct fnic_io_req *)CMD_SP(sc);
1545 * If there is a io_req attached to this command, then use it,
1546 * else allocate a new one.
1548 if (!io_req) {
1549 io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC);
1550 if (!io_req) {
1551 spin_unlock_irqrestore(io_lock, flags);
1552 goto fnic_device_reset_end;
1554 memset(io_req, 0, sizeof(*io_req));
1555 io_req->port_id = rport->port_id;
1556 CMD_SP(sc) = (char *)io_req;
1558 io_req->dr_done = &tm_done;
1559 CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING;
1560 CMD_LR_STATUS(sc) = FCPIO_INVALID_CODE;
1561 spin_unlock_irqrestore(io_lock, flags);
1563 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %d\n",
1564 sc->request->tag);
1567 * issue the device reset, if enqueue failed, clean up the ioreq
1568 * and break assoc with scsi cmd
1570 if (fnic_queue_dr_io_req(fnic, sc, io_req)) {
1571 spin_lock_irqsave(io_lock, flags);
1572 io_req = (struct fnic_io_req *)CMD_SP(sc);
1573 if (io_req)
1574 io_req->dr_done = NULL;
1575 goto fnic_device_reset_clean;
1579 * Wait on the local completion for LUN reset. The io_req may be
1580 * freed while we wait since we hold no lock.
1582 wait_for_completion_timeout(&tm_done,
1583 msecs_to_jiffies(FNIC_LUN_RESET_TIMEOUT));
1585 spin_lock_irqsave(io_lock, flags);
1586 io_req = (struct fnic_io_req *)CMD_SP(sc);
1587 if (!io_req) {
1588 spin_unlock_irqrestore(io_lock, flags);
1589 goto fnic_device_reset_end;
1591 io_req->dr_done = NULL;
1593 status = CMD_LR_STATUS(sc);
1594 spin_unlock_irqrestore(io_lock, flags);
1597 * If lun reset not completed, bail out with failed. io_req
1598 * gets cleaned up during higher levels of EH
1600 if (status == FCPIO_INVALID_CODE) {
1601 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
1602 "Device reset timed out\n");
1603 goto fnic_device_reset_end;
1606 /* Completed, but not successful, clean up the io_req, return fail */
1607 if (status != FCPIO_SUCCESS) {
1608 spin_lock_irqsave(io_lock, flags);
1609 FNIC_SCSI_DBG(KERN_DEBUG,
1610 fnic->lport->host,
1611 "Device reset completed - failed\n");
1612 io_req = (struct fnic_io_req *)CMD_SP(sc);
1613 goto fnic_device_reset_clean;
1617 * Clean up any aborts on this lun that have still not
1618 * completed. If any of these fail, then LUN reset fails.
1619 * clean_pending_aborts cleans all cmds on this lun except
1620 * the lun reset cmd. If all cmds get cleaned, the lun reset
1621 * succeeds
1623 if (fnic_clean_pending_aborts(fnic, sc)) {
1624 spin_lock_irqsave(io_lock, flags);
1625 io_req = (struct fnic_io_req *)CMD_SP(sc);
1626 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
1627 "Device reset failed"
1628 " since could not abort all IOs\n");
1629 goto fnic_device_reset_clean;
1632 /* Clean lun reset command */
1633 spin_lock_irqsave(io_lock, flags);
1634 io_req = (struct fnic_io_req *)CMD_SP(sc);
1635 if (io_req)
1636 /* Completed, and successful */
1637 ret = SUCCESS;
1639 fnic_device_reset_clean:
1640 if (io_req)
1641 CMD_SP(sc) = NULL;
1643 spin_unlock_irqrestore(io_lock, flags);
1645 if (io_req) {
1646 fnic_release_ioreq_buf(fnic, io_req, sc);
1647 mempool_free(io_req, fnic->io_req_pool);
1650 fnic_device_reset_end:
1651 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
1652 "Returning from device reset %s\n",
1653 (ret == SUCCESS) ?
1654 "SUCCESS" : "FAILED");
1655 return ret;
1658 /* Clean up all IOs, clean up libFC local port */
1659 int fnic_reset(struct Scsi_Host *shost)
1661 struct fc_lport *lp;
1662 struct fnic *fnic;
1663 int ret = SUCCESS;
1665 lp = shost_priv(shost);
1666 fnic = lport_priv(lp);
1668 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
1669 "fnic_reset called\n");
1672 * Reset local port, this will clean up libFC exchanges,
1673 * reset remote port sessions, and if link is up, begin flogi
1675 if (lp->tt.lport_reset(lp))
1676 ret = FAILED;
1678 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
1679 "Returning from fnic reset %s\n",
1680 (ret == SUCCESS) ?
1681 "SUCCESS" : "FAILED");
1683 return ret;
1687 * SCSI Error handling calls driver's eh_host_reset if all prior
1688 * error handling levels return FAILED. If host reset completes
1689 * successfully, and if link is up, then Fabric login begins.
1691 * Host Reset is the highest level of error recovery. If this fails, then
1692 * host is offlined by SCSI.
1695 int fnic_host_reset(struct scsi_cmnd *sc)
1697 int ret;
1698 unsigned long wait_host_tmo;
1699 struct Scsi_Host *shost = sc->device->host;
1700 struct fc_lport *lp = shost_priv(shost);
1703 * If fnic_reset is successful, wait for fabric login to complete
1704 * scsi-ml tries to send a TUR to every device if host reset is
1705 * successful, so before returning to scsi, fabric should be up
1707 ret = fnic_reset(shost);
1708 if (ret == SUCCESS) {
1709 wait_host_tmo = jiffies + FNIC_HOST_RESET_SETTLE_TIME * HZ;
1710 ret = FAILED;
1711 while (time_before(jiffies, wait_host_tmo)) {
1712 if ((lp->state == LPORT_ST_READY) &&
1713 (lp->link_up)) {
1714 ret = SUCCESS;
1715 break;
1717 ssleep(1);
1721 return ret;
1725 * This fxn is called from libFC when host is removed
1727 void fnic_scsi_abort_io(struct fc_lport *lp)
1729 int err = 0;
1730 unsigned long flags;
1731 enum fnic_state old_state;
1732 struct fnic *fnic = lport_priv(lp);
1733 DECLARE_COMPLETION_ONSTACK(remove_wait);
1735 /* Issue firmware reset for fnic, wait for reset to complete */
1736 spin_lock_irqsave(&fnic->fnic_lock, flags);
1737 fnic->remove_wait = &remove_wait;
1738 old_state = fnic->state;
1739 fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
1740 fnic_update_mac_locked(fnic, fnic->ctlr.ctl_src_addr);
1741 spin_unlock_irqrestore(&fnic->fnic_lock, flags);
1743 err = fnic_fw_reset_handler(fnic);
1744 if (err) {
1745 spin_lock_irqsave(&fnic->fnic_lock, flags);
1746 if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)
1747 fnic->state = old_state;
1748 fnic->remove_wait = NULL;
1749 spin_unlock_irqrestore(&fnic->fnic_lock, flags);
1750 return;
1753 /* Wait for firmware reset to complete */
1754 wait_for_completion_timeout(&remove_wait,
1755 msecs_to_jiffies(FNIC_RMDEVICE_TIMEOUT));
1757 spin_lock_irqsave(&fnic->fnic_lock, flags);
1758 fnic->remove_wait = NULL;
1759 FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
1760 "fnic_scsi_abort_io %s\n",
1761 (fnic->state == FNIC_IN_ETH_MODE) ?
1762 "SUCCESS" : "FAILED");
1763 spin_unlock_irqrestore(&fnic->fnic_lock, flags);
1768 * This fxn called from libFC to clean up driver IO state on link down
1770 void fnic_scsi_cleanup(struct fc_lport *lp)
1772 unsigned long flags;
1773 enum fnic_state old_state;
1774 struct fnic *fnic = lport_priv(lp);
1776 /* issue fw reset */
1777 spin_lock_irqsave(&fnic->fnic_lock, flags);
1778 old_state = fnic->state;
1779 fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
1780 fnic_update_mac_locked(fnic, fnic->ctlr.ctl_src_addr);
1781 spin_unlock_irqrestore(&fnic->fnic_lock, flags);
1783 if (fnic_fw_reset_handler(fnic)) {
1784 spin_lock_irqsave(&fnic->fnic_lock, flags);
1785 if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)
1786 fnic->state = old_state;
1787 spin_unlock_irqrestore(&fnic->fnic_lock, flags);
1792 void fnic_empty_scsi_cleanup(struct fc_lport *lp)
1796 void fnic_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did)
1798 struct fnic *fnic = lport_priv(lp);
1800 /* Non-zero sid, nothing to do */
1801 if (sid)
1802 goto call_fc_exch_mgr_reset;
1804 if (did) {
1805 fnic_rport_exch_reset(fnic, did);
1806 goto call_fc_exch_mgr_reset;
1810 * sid = 0, did = 0
1811 * link down or device being removed
1813 if (!fnic->in_remove)
1814 fnic_scsi_cleanup(lp);
1815 else
1816 fnic_scsi_abort_io(lp);
1818 /* call libFC exch mgr reset to reset its exchanges */
1819 call_fc_exch_mgr_reset:
1820 fc_exch_mgr_reset(lp, sid, did);