release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/net/wireless/libertas/if_spi.h

   1 /*
   2  *      linux/drivers/net/wireless/libertas/if_spi.c
   3  *
   4  *      Driver for Marvell SPI WLAN cards.
   5  *
   6  *      Copyright 2008 Analog Devices Inc.
   7  *
   8  *      Authors:
   9  *      Andrey Yurovsky <andrey@cozybit.com>
  10  *      Colin McCabe <colin@cozybit.com>
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License as published by
  14  * the Free Software Foundation; either version 2 of the License, or (at
  15  * your option) any later version.
  16  */
  17
  18 #ifndef _LBS_IF_SPI_H_
  19 #define _LBS_IF_SPI_H_
  20
  21 #define IPFIELD_ALIGN_OFFSET 2
  22 #define IF_SPI_CMD_BUF_SIZE 2400
  23
  24 /***************** Firmware *****************/
  25
  26 #define IF_SPI_FW_NAME_MAX 30
  27
  28 struct chip_ident {
  29         u16 chip_id;
  30         u16 name;
  31 };
  32
  33 #define MAX_MAIN_FW_LOAD_CRC_ERR 10
  34
  35 /* Chunk size when loading the helper firmware */
  36 #define HELPER_FW_LOAD_CHUNK_SZ 64
  37
  38 /* Value to write to indicate end of helper firmware dnld */
  39 #define FIRMWARE_DNLD_OK 0x0000
  40
  41 /* Value to check once the main firmware is downloaded */
  42 #define SUCCESSFUL_FW_DOWNLOAD_MAGIC 0x88888888
  43
  44 /***************** SPI Interface Unit *****************/
  45 /* Masks used in SPI register read/write operations */
  46 #define IF_SPI_READ_OPERATION_MASK 0x0
  47 #define IF_SPI_WRITE_OPERATION_MASK 0x8000
  48
  49 /* SPI register offsets. 4-byte aligned. */
  50 #define IF_SPI_DEVICEID_CTRL_REG 0x00   /* DeviceID controller reg */
  51 #define IF_SPI_IO_READBASE_REG 0x04     /* Read I/O base reg */
  52 #define IF_SPI_IO_WRITEBASE_REG 0x08    /* Write I/O base reg */
  53 #define IF_SPI_IO_RDWRPORT_REG 0x0C     /* Read/Write I/O port reg */
  54
  55 #define IF_SPI_CMD_READBASE_REG 0x10    /* Read command base reg */
  56 #define IF_SPI_CMD_WRITEBASE_REG 0x14   /* Write command base reg */
  57 #define IF_SPI_CMD_RDWRPORT_REG 0x18    /* Read/Write command port reg */
  58
  59 #define IF_SPI_DATA_READBASE_REG 0x1C   /* Read data base reg */
  60 #define IF_SPI_DATA_WRITEBASE_REG 0x20  /* Write data base reg */
  61 #define IF_SPI_DATA_RDWRPORT_REG 0x24   /* Read/Write data port reg */
  62
  63 #define IF_SPI_SCRATCH_1_REG 0x28       /* Scratch reg 1 */
  64 #define IF_SPI_SCRATCH_2_REG 0x2C       /* Scratch reg 2 */
  65 #define IF_SPI_SCRATCH_3_REG 0x30       /* Scratch reg 3 */
  66 #define IF_SPI_SCRATCH_4_REG 0x34       /* Scratch reg 4 */
  67
  68 #define IF_SPI_TX_FRAME_SEQ_NUM_REG 0x38 /* Tx frame sequence number reg */
  69 #define IF_SPI_TX_FRAME_STATUS_REG 0x3C /* Tx frame status reg */
  70
  71 #define IF_SPI_HOST_INT_CTRL_REG 0x40   /* Host interrupt controller reg */
  72
  73 #define IF_SPI_CARD_INT_CAUSE_REG 0x44  /* Card interrupt cause reg */
  74 #define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interupt status reg */
  75 #define IF_SPI_CARD_INT_EVENT_MASK_REG 0x4C /* Card interrupt event mask */
  76 #define IF_SPI_CARD_INT_STATUS_MASK_REG 0x50 /* Card interrupt status mask */
  77
  78 #define IF_SPI_CARD_INT_RESET_SELECT_REG 0x54 /* Card interrupt reset select */
  79
  80 #define IF_SPI_HOST_INT_CAUSE_REG 0x58  /* Host interrupt cause reg */
  81 #define IF_SPI_HOST_INT_STATUS_REG 0x5C /* Host interrupt status reg */
  82 #define IF_SPI_HOST_INT_EVENT_MASK_REG 0x60 /* Host interrupt event mask */
  83 #define IF_SPI_HOST_INT_STATUS_MASK_REG 0x64 /* Host interrupt status mask */
  84 #define IF_SPI_HOST_INT_RESET_SELECT_REG 0x68 /* Host interrupt reset select */
  85
  86 #define IF_SPI_DELAY_READ_REG 0x6C      /* Delay read reg */
  87 #define IF_SPI_SPU_BUS_MODE_REG 0x70    /* SPU BUS mode reg */
  88
  89 /***************** IF_SPI_DEVICEID_CTRL_REG *****************/
  90 #define IF_SPI_DEVICEID_CTRL_REG_TO_CARD_ID(dc) ((dc & 0xffff0000)>>16)
  91 #define IF_SPI_DEVICEID_CTRL_REG_TO_CARD_REV(dc) (dc & 0x000000ff)
  92
  93 /***************** IF_SPI_HOST_INT_CTRL_REG *****************/
  94 /** Host Interrupt Control bit : Wake up */
  95 #define IF_SPI_HICT_WAKE_UP                             (1<<0)
  96 /** Host Interrupt Control bit : WLAN ready */
  97 #define IF_SPI_HICT_WLAN_READY                          (1<<1)
  98 /*#define IF_SPI_HICT_FIFO_FIRST_HALF_EMPTY             (1<<2) */
  99 /*#define IF_SPI_HICT_FIFO_SECOND_HALF_EMPTY            (1<<3) */
 100 /*#define IF_SPI_HICT_IRQSRC_WLAN                       (1<<4) */
 101 /** Host Interrupt Control bit : Tx auto download */
 102 #define IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO               (1<<5)
 103 /** Host Interrupt Control bit : Rx auto upload */
 104 #define IF_SPI_HICT_RX_UPLOAD_OVER_AUTO                 (1<<6)
 105 /** Host Interrupt Control bit : Command auto download */
 106 #define IF_SPI_HICT_CMD_DOWNLOAD_OVER_AUTO              (1<<7)
 107 /** Host Interrupt Control bit : Command auto upload */
 108 #define IF_SPI_HICT_CMD_UPLOAD_OVER_AUTO                (1<<8)
 109
 110 /***************** IF_SPI_CARD_INT_CAUSE_REG *****************/
 111 /** Card Interrupt Case bit : Tx download over */
 112 #define IF_SPI_CIC_TX_DOWNLOAD_OVER                     (1<<0)
 113 /** Card Interrupt Case bit : Rx upload over */
 114 #define IF_SPI_CIC_RX_UPLOAD_OVER                       (1<<1)
 115 /** Card Interrupt Case bit : Command download over */
 116 #define IF_SPI_CIC_CMD_DOWNLOAD_OVER                    (1<<2)
 117 /** Card Interrupt Case bit : Host event */
 118 #define IF_SPI_CIC_HOST_EVENT                           (1<<3)
 119 /** Card Interrupt Case bit : Command upload over */
 120 #define IF_SPI_CIC_CMD_UPLOAD_OVER                      (1<<4)
 121 /** Card Interrupt Case bit : Power down */
 122 #define IF_SPI_CIC_POWER_DOWN                           (1<<5)
 123
 124 /***************** IF_SPI_CARD_INT_STATUS_REG *****************/
 125 #define IF_SPI_CIS_TX_DOWNLOAD_OVER                     (1<<0)
 126 #define IF_SPI_CIS_RX_UPLOAD_OVER                       (1<<1)
 127 #define IF_SPI_CIS_CMD_DOWNLOAD_OVER                    (1<<2)
 128 #define IF_SPI_CIS_HOST_EVENT                           (1<<3)
 129 #define IF_SPI_CIS_CMD_UPLOAD_OVER                      (1<<4)
 130 #define IF_SPI_CIS_POWER_DOWN                           (1<<5)
 131
 132 /***************** IF_SPI_HOST_INT_CAUSE_REG *****************/
 133 #define IF_SPI_HICU_TX_DOWNLOAD_RDY                     (1<<0)
 134 #define IF_SPI_HICU_RX_UPLOAD_RDY                       (1<<1)
 135 #define IF_SPI_HICU_CMD_DOWNLOAD_RDY                    (1<<2)
 136 #define IF_SPI_HICU_CARD_EVENT                          (1<<3)
 137 #define IF_SPI_HICU_CMD_UPLOAD_RDY                      (1<<4)
 138 #define IF_SPI_HICU_IO_WR_FIFO_OVERFLOW                 (1<<5)
 139 #define IF_SPI_HICU_IO_RD_FIFO_UNDERFLOW                (1<<6)
 140 #define IF_SPI_HICU_DATA_WR_FIFO_OVERFLOW               (1<<7)
 141 #define IF_SPI_HICU_DATA_RD_FIFO_UNDERFLOW              (1<<8)
 142 #define IF_SPI_HICU_CMD_WR_FIFO_OVERFLOW                (1<<9)
 143 #define IF_SPI_HICU_CMD_RD_FIFO_UNDERFLOW               (1<<10)
 144
 145 /***************** IF_SPI_HOST_INT_STATUS_REG *****************/
 146 /** Host Interrupt Status bit : Tx download ready */
 147 #define IF_SPI_HIST_TX_DOWNLOAD_RDY                     (1<<0)
 148 /** Host Interrupt Status bit : Rx upload ready */
 149 #define IF_SPI_HIST_RX_UPLOAD_RDY                       (1<<1)
 150 /** Host Interrupt Status bit : Command download ready */
 151 #define IF_SPI_HIST_CMD_DOWNLOAD_RDY                    (1<<2)
 152 /** Host Interrupt Status bit : Card event */
 153 #define IF_SPI_HIST_CARD_EVENT                          (1<<3)
 154 /** Host Interrupt Status bit : Command upload ready */
 155 #define IF_SPI_HIST_CMD_UPLOAD_RDY                      (1<<4)
 156 /** Host Interrupt Status bit : I/O write FIFO overflow */
 157 #define IF_SPI_HIST_IO_WR_FIFO_OVERFLOW                 (1<<5)
 158 /** Host Interrupt Status bit : I/O read FIFO underflow */
 159 #define IF_SPI_HIST_IO_RD_FIFO_UNDRFLOW                 (1<<6)
 160 /** Host Interrupt Status bit : Data write FIFO overflow */
 161 #define IF_SPI_HIST_DATA_WR_FIFO_OVERFLOW               (1<<7)
 162 /** Host Interrupt Status bit : Data read FIFO underflow */
 163 #define IF_SPI_HIST_DATA_RD_FIFO_UNDERFLOW              (1<<8)
 164 /** Host Interrupt Status bit : Command write FIFO overflow */
 165 #define IF_SPI_HIST_CMD_WR_FIFO_OVERFLOW                (1<<9)
 166 /** Host Interrupt Status bit : Command read FIFO underflow */
 167 #define IF_SPI_HIST_CMD_RD_FIFO_UNDERFLOW               (1<<10)
 168
 169 /***************** IF_SPI_HOST_INT_STATUS_MASK_REG *****************/
 170 /** Host Interrupt Status Mask bit : Tx download ready */
 171 #define IF_SPI_HISM_TX_DOWNLOAD_RDY                     (1<<0)
 172 /** Host Interrupt Status Mask bit : Rx upload ready */
 173 #define IF_SPI_HISM_RX_UPLOAD_RDY                       (1<<1)
 174 /** Host Interrupt Status Mask bit : Command download ready */
 175 #define IF_SPI_HISM_CMD_DOWNLOAD_RDY                    (1<<2)
 176 /** Host Interrupt Status Mask bit : Card event */
 177 #define IF_SPI_HISM_CARDEVENT                           (1<<3)
 178 /** Host Interrupt Status Mask bit : Command upload ready */
 179 #define IF_SPI_HISM_CMD_UPLOAD_RDY                      (1<<4)
 180 /** Host Interrupt Status Mask bit : I/O write FIFO overflow */
 181 #define IF_SPI_HISM_IO_WR_FIFO_OVERFLOW                 (1<<5)
 182 /** Host Interrupt Status Mask bit : I/O read FIFO underflow */
 183 #define IF_SPI_HISM_IO_RD_FIFO_UNDERFLOW                (1<<6)
 184 /** Host Interrupt Status Mask bit : Data write FIFO overflow */
 185 #define IF_SPI_HISM_DATA_WR_FIFO_OVERFLOW               (1<<7)
 186 /** Host Interrupt Status Mask bit : Data write FIFO underflow */
 187 #define IF_SPI_HISM_DATA_RD_FIFO_UNDERFLOW              (1<<8)
 188 /** Host Interrupt Status Mask bit : Command write FIFO overflow */
 189 #define IF_SPI_HISM_CMD_WR_FIFO_OVERFLOW                (1<<9)
 190 /** Host Interrupt Status Mask bit : Command write FIFO underflow */
 191 #define IF_SPI_HISM_CMD_RD_FIFO_UNDERFLOW               (1<<10)
 192
 193 /***************** IF_SPI_SPU_BUS_MODE_REG *****************/
 194 /* SCK edge on which the WLAN module outputs data on MISO */
 195 #define IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_FALLING 0x8
 196 #define IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING 0x0
 197
 198 /* In a SPU read operation, there is a delay between writing the SPU
 199  * register name and getting back data from the WLAN module.
 200  * This can be specified in terms of nanoseconds or in terms of dummy
 201  * clock cycles which the master must output before receiving a response. */
 202 #define IF_SPI_BUS_MODE_DELAY_METHOD_DUMMY_CLOCK 0x4
 203 #define IF_SPI_BUS_MODE_DELAY_METHOD_TIMED 0x0
 204
 205 /* Some different modes of SPI operation */
 206 #define IF_SPI_BUS_MODE_8_BIT_ADDRESS_16_BIT_DATA 0x00
 207 #define IF_SPI_BUS_MODE_8_BIT_ADDRESS_32_BIT_DATA 0x01
 208 #define IF_SPI_BUS_MODE_16_BIT_ADDRESS_16_BIT_DATA 0x02
 209 #define IF_SPI_BUS_MODE_16_BIT_ADDRESS_32_BIT_DATA 0x03
 210
 211 #endif