GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / net / stnic.c
blob9fa5c73835d962f17fa7cff070bcee6a51db0bd8
1 /* stnic.c : A SH7750 specific part of driver for NS DP83902A ST-NIC.
3 * This file is subject to the terms and conditions of the GNU General Public
4 * License. See the file "COPYING" in the main directory of this archive
5 * for more details.
7 * Copyright (C) 1999 kaz Kojima
8 */
10 #include <linux/module.h>
11 #include <linux/kernel.h>
12 #include <linux/errno.h>
13 #include <linux/interrupt.h>
14 #include <linux/ioport.h>
15 #include <linux/netdevice.h>
16 #include <linux/etherdevice.h>
17 #include <linux/init.h>
18 #include <linux/delay.h>
20 #include <asm/system.h>
21 #include <asm/io.h>
22 #include <mach-se/mach/se.h>
23 #include <asm/machvec.h>
24 #ifdef CONFIG_SH_STANDARD_BIOS
25 #include <asm/sh_bios.h>
26 #endif
28 #include "8390.h"
30 #define DRV_NAME "stnic"
32 #define byte unsigned char
33 #define half unsigned short
34 #define word unsigned int
35 #define vbyte volatile unsigned char
36 #define vhalf volatile unsigned short
37 #define vword volatile unsigned int
39 #define STNIC_RUN 0x01 /* 1 == Run, 0 == reset. */
41 #define START_PG 0 /* First page of TX buffer */
42 #define STOP_PG 128 /* Last page +1 of RX ring */
44 /* Alias */
45 #define STNIC_CR E8390_CMD
46 #define PG0_RSAR0 EN0_RSARLO
47 #define PG0_RSAR1 EN0_RSARHI
48 #define PG0_RBCR0 EN0_RCNTLO
49 #define PG0_RBCR1 EN0_RCNTHI
51 #define CR_RRD E8390_RREAD
52 #define CR_RWR E8390_RWRITE
53 #define CR_PG0 E8390_PAGE0
54 #define CR_STA E8390_START
55 #define CR_RDMA E8390_NODMA
57 static byte stnic_eadr[6] =
58 {0x00, 0xc0, 0x6e, 0x00, 0x00, 0x07};
60 static struct net_device *stnic_dev;
62 static void stnic_reset (struct net_device *dev);
63 static void stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr,
64 int ring_page);
65 static void stnic_block_input (struct net_device *dev, int count,
66 struct sk_buff *skb , int ring_offset);
67 static void stnic_block_output (struct net_device *dev, int count,
68 const unsigned char *buf, int start_page);
70 static void stnic_init (struct net_device *dev);
72 /* SH7750 specific read/write io. */
73 static inline void
74 STNIC_DELAY (void)
76 vword trash;
77 trash = *(vword *) 0xa0000000;
78 trash = *(vword *) 0xa0000000;
79 trash = *(vword *) 0xa0000000;
82 static inline byte
83 STNIC_READ (int reg)
85 byte val;
87 val = (*(vhalf *) (PA_83902 + ((reg) << 1)) >> 8) & 0xff;
88 STNIC_DELAY ();
89 return val;
92 static inline void
93 STNIC_WRITE (int reg, byte val)
95 *(vhalf *) (PA_83902 + ((reg) << 1)) = ((half) (val) << 8);
96 STNIC_DELAY ();
99 static int __init stnic_probe(void)
101 struct net_device *dev;
102 int i, err;
104 /* If we are not running on a SolutionEngine, give up now */
105 if (! MACH_SE)
106 return -ENODEV;
108 /* New style probing API */
109 dev = alloc_ei_netdev();
110 if (!dev)
111 return -ENOMEM;
113 #ifdef CONFIG_SH_STANDARD_BIOS
114 sh_bios_get_node_addr (stnic_eadr);
115 #endif
116 for (i = 0; i < ETHER_ADDR_LEN; i++)
117 dev->dev_addr[i] = stnic_eadr[i];
119 /* Set the base address to point to the NIC, not the "real" base! */
120 dev->base_addr = 0x1000;
121 dev->irq = IRQ_STNIC;
122 dev->netdev_ops = &ei_netdev_ops;
124 /* Snarf the interrupt now. There's no point in waiting since we cannot
125 share and the board will usually be enabled. */
126 err = request_irq (dev->irq, ei_interrupt, 0, DRV_NAME, dev);
127 if (err) {
128 printk (KERN_EMERG " unable to get IRQ %d.\n", dev->irq);
129 free_netdev(dev);
130 return err;
133 ei_status.name = dev->name;
134 ei_status.word16 = 1;
135 #ifdef __LITTLE_ENDIAN__
136 ei_status.bigendian = 0;
137 #else
138 ei_status.bigendian = 1;
139 #endif
140 ei_status.tx_start_page = START_PG;
141 ei_status.rx_start_page = START_PG + TX_PAGES;
142 ei_status.stop_page = STOP_PG;
144 ei_status.reset_8390 = &stnic_reset;
145 ei_status.get_8390_hdr = &stnic_get_hdr;
146 ei_status.block_input = &stnic_block_input;
147 ei_status.block_output = &stnic_block_output;
149 stnic_init (dev);
151 err = register_netdev(dev);
152 if (err) {
153 free_irq(dev->irq, dev);
154 free_netdev(dev);
155 return err;
157 stnic_dev = dev;
159 printk (KERN_INFO "NS ST-NIC 83902A\n");
161 return 0;
164 static void
165 stnic_reset (struct net_device *dev)
167 *(vhalf *) PA_83902_RST = 0;
168 udelay (5);
169 if (ei_debug > 1)
170 printk (KERN_WARNING "8390 reset done (%ld).\n", jiffies);
171 *(vhalf *) PA_83902_RST = ~0;
172 udelay (5);
175 static void
176 stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr,
177 int ring_page)
179 half buf[2];
181 STNIC_WRITE (PG0_RSAR0, 0);
182 STNIC_WRITE (PG0_RSAR1, ring_page);
183 STNIC_WRITE (PG0_RBCR0, 4);
184 STNIC_WRITE (PG0_RBCR1, 0);
185 STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
187 buf[0] = *(vhalf *) PA_83902_IF;
188 STNIC_DELAY ();
189 buf[1] = *(vhalf *) PA_83902_IF;
190 STNIC_DELAY ();
191 hdr->next = buf[0] >> 8;
192 hdr->status = buf[0] & 0xff;
193 #ifdef __LITTLE_ENDIAN__
194 hdr->count = buf[1];
195 #else
196 hdr->count = ((buf[1] >> 8) & 0xff) | (buf[1] << 8);
197 #endif
199 if (ei_debug > 1)
200 printk (KERN_DEBUG "ring %x status %02x next %02x count %04x.\n",
201 ring_page, hdr->status, hdr->next, hdr->count);
203 STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
206 /* Block input and output, similar to the Crynwr packet driver. If you are
207 porting to a new ethercard look at the packet driver source for hints.
208 The HP LAN doesn't use shared memory -- we put the packet
209 out through the "remote DMA" dataport. */
211 static void
212 stnic_block_input (struct net_device *dev, int length, struct sk_buff *skb,
213 int offset)
215 char *buf = skb->data;
216 half val;
218 STNIC_WRITE (PG0_RSAR0, offset & 0xff);
219 STNIC_WRITE (PG0_RSAR1, offset >> 8);
220 STNIC_WRITE (PG0_RBCR0, length & 0xff);
221 STNIC_WRITE (PG0_RBCR1, length >> 8);
222 STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
224 if (length & 1)
225 length++;
227 while (length > 0)
229 val = *(vhalf *) PA_83902_IF;
230 #ifdef __LITTLE_ENDIAN__
231 *buf++ = val & 0xff;
232 *buf++ = val >> 8;
233 #else
234 *buf++ = val >> 8;
235 *buf++ = val & 0xff;
236 #endif
237 STNIC_DELAY ();
238 length -= sizeof (half);
241 STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
244 static void
245 stnic_block_output (struct net_device *dev, int length,
246 const unsigned char *buf, int output_page)
248 STNIC_WRITE (PG0_RBCR0, 1); /* Write non-zero value */
249 STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
250 STNIC_DELAY ();
252 STNIC_WRITE (PG0_RBCR0, length & 0xff);
253 STNIC_WRITE (PG0_RBCR1, length >> 8);
254 STNIC_WRITE (PG0_RSAR0, 0);
255 STNIC_WRITE (PG0_RSAR1, output_page);
256 STNIC_WRITE (STNIC_CR, CR_RWR | CR_PG0 | CR_STA);
258 if (length & 1)
259 length++;
261 while (length > 0)
263 #ifdef __LITTLE_ENDIAN__
264 *(vhalf *) PA_83902_IF = ((half) buf[1] << 8) | buf[0];
265 #else
266 *(vhalf *) PA_83902_IF = ((half) buf[0] << 8) | buf[1];
267 #endif
268 STNIC_DELAY ();
269 buf += sizeof (half);
270 length -= sizeof (half);
273 STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
276 /* This function resets the STNIC if something screws up. */
277 static void
278 stnic_init (struct net_device *dev)
280 stnic_reset (dev);
281 NS8390_init (dev, 0);
284 static void __exit stnic_cleanup(void)
286 unregister_netdev(stnic_dev);
287 free_irq(stnic_dev->irq, stnic_dev);
288 free_netdev(stnic_dev);
291 module_init(stnic_probe);
292 module_exit(stnic_cleanup);
293 MODULE_LICENSE("GPL");