GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / block / xsysace.c
blob21cc94caa62dcce2614b9add39b42d28abe17191
1 /*
2 * Xilinx SystemACE device driver
4 * Copyright 2007 Secret Lab Technologies Ltd.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
12 * The SystemACE chip is designed to configure FPGAs by loading an FPGA
13 * bitstream from a file on a CF card and squirting it into FPGAs connected
14 * to the SystemACE JTAG chain. It also has the advantage of providing an
15 * MPU interface which can be used to control the FPGA configuration process
16 * and to use the attached CF card for general purpose storage.
18 * This driver is a block device driver for the SystemACE.
20 * Initialization:
21 * The driver registers itself as a platform_device driver at module
22 * load time. The platform bus will take care of calling the
23 * ace_probe() method for all SystemACE instances in the system. Any
24 * number of SystemACE instances are supported. ace_probe() calls
25 * ace_setup() which initialized all data structures, reads the CF
26 * id structure and registers the device.
28 * Processing:
29 * Just about all of the heavy lifting in this driver is performed by
30 * a Finite State Machine (FSM). The driver needs to wait on a number
31 * of events; some raised by interrupts, some which need to be polled
32 * for. Describing all of the behaviour in a FSM seems to be the
33 * easiest way to keep the complexity low and make it easy to
34 * understand what the driver is doing. If the block ops or the
35 * request function need to interact with the hardware, then they
36 * simply need to flag the request and kick of FSM processing.
38 * The FSM itself is atomic-safe code which can be run from any
39 * context. The general process flow is:
40 * 1. obtain the ace->lock spinlock.
41 * 2. loop on ace_fsm_dostate() until the ace->fsm_continue flag is
42 * cleared.
43 * 3. release the lock.
45 * Individual states do not sleep in any way. If a condition needs to
46 * be waited for then the state much clear the fsm_continue flag and
47 * either schedule the FSM to be run again at a later time, or expect
48 * an interrupt to call the FSM when the desired condition is met.
50 * In normal operation, the FSM is processed at interrupt context
51 * either when the driver's tasklet is scheduled, or when an irq is
52 * raised by the hardware. The tasklet can be scheduled at any time.
53 * The request method in particular schedules the tasklet when a new
54 * request has been indicated by the block layer. Once started, the
55 * FSM proceeds as far as it can processing the request until it
56 * needs on a hardware event. At this point, it must yield execution.
58 * A state has two options when yielding execution:
59 * 1. ace_fsm_yield()
60 * - Call if need to poll for event.
61 * - clears the fsm_continue flag to exit the processing loop
62 * - reschedules the tasklet to run again as soon as possible
63 * 2. ace_fsm_yieldirq()
64 * - Call if an irq is expected from the HW
65 * - clears the fsm_continue flag to exit the processing loop
66 * - does not reschedule the tasklet so the FSM will not be processed
67 * again until an irq is received.
68 * After calling a yield function, the state must return control back
69 * to the FSM main loop.
71 * Additionally, the driver maintains a kernel timer which can process
72 * the FSM. If the FSM gets stalled, typically due to a missed
73 * interrupt, then the kernel timer will expire and the driver can
74 * continue where it left off.
76 * To Do:
77 * - Add FPGA configuration control interface.
78 * - Request major number from lanana
81 #undef DEBUG
83 #include <linux/module.h>
84 #include <linux/ctype.h>
85 #include <linux/init.h>
86 #include <linux/interrupt.h>
87 #include <linux/errno.h>
88 #include <linux/kernel.h>
89 #include <linux/delay.h>
90 #include <linux/slab.h>
91 #include <linux/blkdev.h>
92 #include <linux/smp_lock.h>
93 #include <linux/ata.h>
94 #include <linux/hdreg.h>
95 #include <linux/platform_device.h>
96 #if defined(CONFIG_OF)
97 #include <linux/of_address.h>
98 #include <linux/of_device.h>
99 #include <linux/of_platform.h>
100 #endif
102 MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
103 MODULE_DESCRIPTION("Xilinx SystemACE device driver");
104 MODULE_LICENSE("GPL");
106 /* SystemACE register definitions */
107 #define ACE_BUSMODE (0x00)
109 #define ACE_STATUS (0x04)
110 #define ACE_STATUS_CFGLOCK (0x00000001)
111 #define ACE_STATUS_MPULOCK (0x00000002)
112 #define ACE_STATUS_CFGERROR (0x00000004) /* config controller error */
113 #define ACE_STATUS_CFCERROR (0x00000008) /* CF controller error */
114 #define ACE_STATUS_CFDETECT (0x00000010)
115 #define ACE_STATUS_DATABUFRDY (0x00000020)
116 #define ACE_STATUS_DATABUFMODE (0x00000040)
117 #define ACE_STATUS_CFGDONE (0x00000080)
118 #define ACE_STATUS_RDYFORCFCMD (0x00000100)
119 #define ACE_STATUS_CFGMODEPIN (0x00000200)
120 #define ACE_STATUS_CFGADDR_MASK (0x0000e000)
121 #define ACE_STATUS_CFBSY (0x00020000)
122 #define ACE_STATUS_CFRDY (0x00040000)
123 #define ACE_STATUS_CFDWF (0x00080000)
124 #define ACE_STATUS_CFDSC (0x00100000)
125 #define ACE_STATUS_CFDRQ (0x00200000)
126 #define ACE_STATUS_CFCORR (0x00400000)
127 #define ACE_STATUS_CFERR (0x00800000)
129 #define ACE_ERROR (0x08)
130 #define ACE_CFGLBA (0x0c)
131 #define ACE_MPULBA (0x10)
133 #define ACE_SECCNTCMD (0x14)
134 #define ACE_SECCNTCMD_RESET (0x0100)
135 #define ACE_SECCNTCMD_IDENTIFY (0x0200)
136 #define ACE_SECCNTCMD_READ_DATA (0x0300)
137 #define ACE_SECCNTCMD_WRITE_DATA (0x0400)
138 #define ACE_SECCNTCMD_ABORT (0x0600)
140 #define ACE_VERSION (0x16)
141 #define ACE_VERSION_REVISION_MASK (0x00FF)
142 #define ACE_VERSION_MINOR_MASK (0x0F00)
143 #define ACE_VERSION_MAJOR_MASK (0xF000)
145 #define ACE_CTRL (0x18)
146 #define ACE_CTRL_FORCELOCKREQ (0x0001)
147 #define ACE_CTRL_LOCKREQ (0x0002)
148 #define ACE_CTRL_FORCECFGADDR (0x0004)
149 #define ACE_CTRL_FORCECFGMODE (0x0008)
150 #define ACE_CTRL_CFGMODE (0x0010)
151 #define ACE_CTRL_CFGSTART (0x0020)
152 #define ACE_CTRL_CFGSEL (0x0040)
153 #define ACE_CTRL_CFGRESET (0x0080)
154 #define ACE_CTRL_DATABUFRDYIRQ (0x0100)
155 #define ACE_CTRL_ERRORIRQ (0x0200)
156 #define ACE_CTRL_CFGDONEIRQ (0x0400)
157 #define ACE_CTRL_RESETIRQ (0x0800)
158 #define ACE_CTRL_CFGPROG (0x1000)
159 #define ACE_CTRL_CFGADDR_MASK (0xe000)
161 #define ACE_FATSTAT (0x1c)
163 #define ACE_NUM_MINORS 16
164 #define ACE_SECTOR_SIZE (512)
165 #define ACE_FIFO_SIZE (32)
166 #define ACE_BUF_PER_SECTOR (ACE_SECTOR_SIZE / ACE_FIFO_SIZE)
168 #define ACE_BUS_WIDTH_8 0
169 #define ACE_BUS_WIDTH_16 1
171 struct ace_reg_ops;
173 struct ace_device {
174 /* driver state data */
175 int id;
176 int media_change;
177 int users;
178 struct list_head list;
180 /* finite state machine data */
181 struct tasklet_struct fsm_tasklet;
182 uint fsm_task; /* Current activity (ACE_TASK_*) */
183 uint fsm_state; /* Current state (ACE_FSM_STATE_*) */
184 uint fsm_continue_flag; /* cleared to exit FSM mainloop */
185 uint fsm_iter_num;
186 struct timer_list stall_timer;
188 /* Transfer state/result, use for both id and block request */
189 struct request *req; /* request being processed */
190 void *data_ptr; /* pointer to I/O buffer */
191 int data_count; /* number of buffers remaining */
192 int data_result; /* Result of transfer; 0 := success */
194 int id_req_count; /* count of id requests */
195 int id_result;
196 struct completion id_completion; /* used when id req finishes */
197 int in_irq;
199 /* Details of hardware device */
200 resource_size_t physaddr;
201 void __iomem *baseaddr;
202 int irq;
203 int bus_width; /* 0 := 8 bit; 1 := 16 bit */
204 struct ace_reg_ops *reg_ops;
205 int lock_count;
207 /* Block device data structures */
208 spinlock_t lock;
209 struct device *dev;
210 struct request_queue *queue;
211 struct gendisk *gd;
213 /* Inserted CF card parameters */
214 u16 cf_id[ATA_ID_WORDS];
217 static int ace_major;
219 /* ---------------------------------------------------------------------
220 * Low level register access
223 struct ace_reg_ops {
224 u16(*in) (struct ace_device * ace, int reg);
225 void (*out) (struct ace_device * ace, int reg, u16 val);
226 void (*datain) (struct ace_device * ace);
227 void (*dataout) (struct ace_device * ace);
230 /* 8 Bit bus width */
231 static u16 ace_in_8(struct ace_device *ace, int reg)
233 void __iomem *r = ace->baseaddr + reg;
234 return in_8(r) | (in_8(r + 1) << 8);
237 static void ace_out_8(struct ace_device *ace, int reg, u16 val)
239 void __iomem *r = ace->baseaddr + reg;
240 out_8(r, val);
241 out_8(r + 1, val >> 8);
244 static void ace_datain_8(struct ace_device *ace)
246 void __iomem *r = ace->baseaddr + 0x40;
247 u8 *dst = ace->data_ptr;
248 int i = ACE_FIFO_SIZE;
249 while (i--)
250 *dst++ = in_8(r++);
251 ace->data_ptr = dst;
254 static void ace_dataout_8(struct ace_device *ace)
256 void __iomem *r = ace->baseaddr + 0x40;
257 u8 *src = ace->data_ptr;
258 int i = ACE_FIFO_SIZE;
259 while (i--)
260 out_8(r++, *src++);
261 ace->data_ptr = src;
264 static struct ace_reg_ops ace_reg_8_ops = {
265 .in = ace_in_8,
266 .out = ace_out_8,
267 .datain = ace_datain_8,
268 .dataout = ace_dataout_8,
271 /* 16 bit big endian bus attachment */
272 static u16 ace_in_be16(struct ace_device *ace, int reg)
274 return in_be16(ace->baseaddr + reg);
277 static void ace_out_be16(struct ace_device *ace, int reg, u16 val)
279 out_be16(ace->baseaddr + reg, val);
282 static void ace_datain_be16(struct ace_device *ace)
284 int i = ACE_FIFO_SIZE / 2;
285 u16 *dst = ace->data_ptr;
286 while (i--)
287 *dst++ = in_le16(ace->baseaddr + 0x40);
288 ace->data_ptr = dst;
291 static void ace_dataout_be16(struct ace_device *ace)
293 int i = ACE_FIFO_SIZE / 2;
294 u16 *src = ace->data_ptr;
295 while (i--)
296 out_le16(ace->baseaddr + 0x40, *src++);
297 ace->data_ptr = src;
300 /* 16 bit little endian bus attachment */
301 static u16 ace_in_le16(struct ace_device *ace, int reg)
303 return in_le16(ace->baseaddr + reg);
306 static void ace_out_le16(struct ace_device *ace, int reg, u16 val)
308 out_le16(ace->baseaddr + reg, val);
311 static void ace_datain_le16(struct ace_device *ace)
313 int i = ACE_FIFO_SIZE / 2;
314 u16 *dst = ace->data_ptr;
315 while (i--)
316 *dst++ = in_be16(ace->baseaddr + 0x40);
317 ace->data_ptr = dst;
320 static void ace_dataout_le16(struct ace_device *ace)
322 int i = ACE_FIFO_SIZE / 2;
323 u16 *src = ace->data_ptr;
324 while (i--)
325 out_be16(ace->baseaddr + 0x40, *src++);
326 ace->data_ptr = src;
329 static struct ace_reg_ops ace_reg_be16_ops = {
330 .in = ace_in_be16,
331 .out = ace_out_be16,
332 .datain = ace_datain_be16,
333 .dataout = ace_dataout_be16,
336 static struct ace_reg_ops ace_reg_le16_ops = {
337 .in = ace_in_le16,
338 .out = ace_out_le16,
339 .datain = ace_datain_le16,
340 .dataout = ace_dataout_le16,
343 static inline u16 ace_in(struct ace_device *ace, int reg)
345 return ace->reg_ops->in(ace, reg);
348 static inline u32 ace_in32(struct ace_device *ace, int reg)
350 return ace_in(ace, reg) | (ace_in(ace, reg + 2) << 16);
353 static inline void ace_out(struct ace_device *ace, int reg, u16 val)
355 ace->reg_ops->out(ace, reg, val);
358 static inline void ace_out32(struct ace_device *ace, int reg, u32 val)
360 ace_out(ace, reg, val);
361 ace_out(ace, reg + 2, val >> 16);
364 /* ---------------------------------------------------------------------
365 * Debug support functions
368 #if defined(DEBUG)
369 static void ace_dump_mem(void *base, int len)
371 const char *ptr = base;
372 int i, j;
374 for (i = 0; i < len; i += 16) {
375 printk(KERN_INFO "%.8x:", i);
376 for (j = 0; j < 16; j++) {
377 if (!(j % 4))
378 printk(" ");
379 printk("%.2x", ptr[i + j]);
381 printk(" ");
382 for (j = 0; j < 16; j++)
383 printk("%c", isprint(ptr[i + j]) ? ptr[i + j] : '.');
384 printk("\n");
387 #else
388 static inline void ace_dump_mem(void *base, int len)
391 #endif
393 static void ace_dump_regs(struct ace_device *ace)
395 dev_info(ace->dev,
396 " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n"
397 " status:%.8x mpu_lba:%.8x busmode:%4x\n"
398 " error: %.8x cfg_lba:%.8x fatstat:%.4x\n",
399 ace_in32(ace, ACE_CTRL),
400 ace_in(ace, ACE_SECCNTCMD),
401 ace_in(ace, ACE_VERSION),
402 ace_in32(ace, ACE_STATUS),
403 ace_in32(ace, ACE_MPULBA),
404 ace_in(ace, ACE_BUSMODE),
405 ace_in32(ace, ACE_ERROR),
406 ace_in32(ace, ACE_CFGLBA), ace_in(ace, ACE_FATSTAT));
409 void ace_fix_driveid(u16 *id)
411 #if defined(__BIG_ENDIAN)
412 int i;
414 /* All half words have wrong byte order; swap the bytes */
415 for (i = 0; i < ATA_ID_WORDS; i++, id++)
416 *id = le16_to_cpu(*id);
417 #endif
420 /* ---------------------------------------------------------------------
421 * Finite State Machine (FSM) implementation
424 /* FSM tasks; used to direct state transitions */
425 #define ACE_TASK_IDLE 0
426 #define ACE_TASK_IDENTIFY 1
427 #define ACE_TASK_READ 2
428 #define ACE_TASK_WRITE 3
429 #define ACE_FSM_NUM_TASKS 4
431 /* FSM state definitions */
432 #define ACE_FSM_STATE_IDLE 0
433 #define ACE_FSM_STATE_REQ_LOCK 1
434 #define ACE_FSM_STATE_WAIT_LOCK 2
435 #define ACE_FSM_STATE_WAIT_CFREADY 3
436 #define ACE_FSM_STATE_IDENTIFY_PREPARE 4
437 #define ACE_FSM_STATE_IDENTIFY_TRANSFER 5
438 #define ACE_FSM_STATE_IDENTIFY_COMPLETE 6
439 #define ACE_FSM_STATE_REQ_PREPARE 7
440 #define ACE_FSM_STATE_REQ_TRANSFER 8
441 #define ACE_FSM_STATE_REQ_COMPLETE 9
442 #define ACE_FSM_STATE_ERROR 10
443 #define ACE_FSM_NUM_STATES 11
445 /* Set flag to exit FSM loop and reschedule tasklet */
446 static inline void ace_fsm_yield(struct ace_device *ace)
448 dev_dbg(ace->dev, "ace_fsm_yield()\n");
449 tasklet_schedule(&ace->fsm_tasklet);
450 ace->fsm_continue_flag = 0;
453 /* Set flag to exit FSM loop and wait for IRQ to reschedule tasklet */
454 static inline void ace_fsm_yieldirq(struct ace_device *ace)
456 dev_dbg(ace->dev, "ace_fsm_yieldirq()\n");
458 if (ace->irq == NO_IRQ)
459 /* No IRQ assigned, so need to poll */
460 tasklet_schedule(&ace->fsm_tasklet);
461 ace->fsm_continue_flag = 0;
464 /* Get the next read/write request; ending requests that we don't handle */
465 struct request *ace_get_next_request(struct request_queue * q)
467 struct request *req;
469 while ((req = blk_peek_request(q)) != NULL) {
470 if (req->cmd_type == REQ_TYPE_FS)
471 break;
472 blk_start_request(req);
473 __blk_end_request_all(req, -EIO);
475 return req;
478 static void ace_fsm_dostate(struct ace_device *ace)
480 struct request *req;
481 u32 status;
482 u16 val;
483 int count;
485 #if defined(DEBUG)
486 dev_dbg(ace->dev, "fsm_state=%i, id_req_count=%i\n",
487 ace->fsm_state, ace->id_req_count);
488 #endif
490 /* Verify that there is actually a CF in the slot. If not, then
491 * bail out back to the idle state and wake up all the waiters */
492 status = ace_in32(ace, ACE_STATUS);
493 if ((status & ACE_STATUS_CFDETECT) == 0) {
494 ace->fsm_state = ACE_FSM_STATE_IDLE;
495 ace->media_change = 1;
496 set_capacity(ace->gd, 0);
497 dev_info(ace->dev, "No CF in slot\n");
499 /* Drop all in-flight and pending requests */
500 if (ace->req) {
501 __blk_end_request_all(ace->req, -EIO);
502 ace->req = NULL;
504 while ((req = blk_fetch_request(ace->queue)) != NULL)
505 __blk_end_request_all(req, -EIO);
507 /* Drop back to IDLE state and notify waiters */
508 ace->fsm_state = ACE_FSM_STATE_IDLE;
509 ace->id_result = -EIO;
510 while (ace->id_req_count) {
511 complete(&ace->id_completion);
512 ace->id_req_count--;
516 switch (ace->fsm_state) {
517 case ACE_FSM_STATE_IDLE:
518 /* See if there is anything to do */
519 if (ace->id_req_count || ace_get_next_request(ace->queue)) {
520 ace->fsm_iter_num++;
521 ace->fsm_state = ACE_FSM_STATE_REQ_LOCK;
522 mod_timer(&ace->stall_timer, jiffies + HZ);
523 if (!timer_pending(&ace->stall_timer))
524 add_timer(&ace->stall_timer);
525 break;
527 del_timer(&ace->stall_timer);
528 ace->fsm_continue_flag = 0;
529 break;
531 case ACE_FSM_STATE_REQ_LOCK:
532 if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) {
533 /* Already have the lock, jump to next state */
534 ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY;
535 break;
538 /* Request the lock */
539 val = ace_in(ace, ACE_CTRL);
540 ace_out(ace, ACE_CTRL, val | ACE_CTRL_LOCKREQ);
541 ace->fsm_state = ACE_FSM_STATE_WAIT_LOCK;
542 break;
544 case ACE_FSM_STATE_WAIT_LOCK:
545 if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) {
546 /* got the lock; move to next state */
547 ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY;
548 break;
551 /* wait a bit for the lock */
552 ace_fsm_yield(ace);
553 break;
555 case ACE_FSM_STATE_WAIT_CFREADY:
556 status = ace_in32(ace, ACE_STATUS);
557 if (!(status & ACE_STATUS_RDYFORCFCMD) ||
558 (status & ACE_STATUS_CFBSY)) {
559 /* CF card isn't ready; it needs to be polled */
560 ace_fsm_yield(ace);
561 break;
564 /* Device is ready for command; determine what to do next */
565 if (ace->id_req_count)
566 ace->fsm_state = ACE_FSM_STATE_IDENTIFY_PREPARE;
567 else
568 ace->fsm_state = ACE_FSM_STATE_REQ_PREPARE;
569 break;
571 case ACE_FSM_STATE_IDENTIFY_PREPARE:
572 /* Send identify command */
573 ace->fsm_task = ACE_TASK_IDENTIFY;
574 ace->data_ptr = ace->cf_id;
575 ace->data_count = ACE_BUF_PER_SECTOR;
576 ace_out(ace, ACE_SECCNTCMD, ACE_SECCNTCMD_IDENTIFY);
578 /* As per datasheet, put config controller in reset */
579 val = ace_in(ace, ACE_CTRL);
580 ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET);
582 /* irq handler takes over from this point; wait for the
583 * transfer to complete */
584 ace->fsm_state = ACE_FSM_STATE_IDENTIFY_TRANSFER;
585 ace_fsm_yieldirq(ace);
586 break;
588 case ACE_FSM_STATE_IDENTIFY_TRANSFER:
589 /* Check that the sysace is ready to receive data */
590 status = ace_in32(ace, ACE_STATUS);
591 if (status & ACE_STATUS_CFBSY) {
592 dev_dbg(ace->dev, "CFBSY set; t=%i iter=%i dc=%i\n",
593 ace->fsm_task, ace->fsm_iter_num,
594 ace->data_count);
595 ace_fsm_yield(ace);
596 break;
598 if (!(status & ACE_STATUS_DATABUFRDY)) {
599 ace_fsm_yield(ace);
600 break;
603 /* Transfer the next buffer */
604 ace->reg_ops->datain(ace);
605 ace->data_count--;
607 /* If there are still buffers to be transfers; jump out here */
608 if (ace->data_count != 0) {
609 ace_fsm_yieldirq(ace);
610 break;
613 /* transfer finished; kick state machine */
614 dev_dbg(ace->dev, "identify finished\n");
615 ace->fsm_state = ACE_FSM_STATE_IDENTIFY_COMPLETE;
616 break;
618 case ACE_FSM_STATE_IDENTIFY_COMPLETE:
619 ace_fix_driveid(ace->cf_id);
620 ace_dump_mem(ace->cf_id, 512); /* Debug: Dump out disk ID */
622 if (ace->data_result) {
623 /* Error occured, disable the disk */
624 ace->media_change = 1;
625 set_capacity(ace->gd, 0);
626 dev_err(ace->dev, "error fetching CF id (%i)\n",
627 ace->data_result);
628 } else {
629 ace->media_change = 0;
631 /* Record disk parameters */
632 set_capacity(ace->gd,
633 ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY));
634 dev_info(ace->dev, "capacity: %i sectors\n",
635 ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY));
638 /* We're done, drop to IDLE state and notify waiters */
639 ace->fsm_state = ACE_FSM_STATE_IDLE;
640 ace->id_result = ace->data_result;
641 while (ace->id_req_count) {
642 complete(&ace->id_completion);
643 ace->id_req_count--;
645 break;
647 case ACE_FSM_STATE_REQ_PREPARE:
648 req = ace_get_next_request(ace->queue);
649 if (!req) {
650 ace->fsm_state = ACE_FSM_STATE_IDLE;
651 break;
653 blk_start_request(req);
655 /* Okay, it's a data request, set it up for transfer */
656 dev_dbg(ace->dev,
657 "request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n",
658 (unsigned long long)blk_rq_pos(req),
659 blk_rq_sectors(req), blk_rq_cur_sectors(req),
660 rq_data_dir(req));
662 ace->req = req;
663 ace->data_ptr = req->buffer;
664 ace->data_count = blk_rq_cur_sectors(req) * ACE_BUF_PER_SECTOR;
665 ace_out32(ace, ACE_MPULBA, blk_rq_pos(req) & 0x0FFFFFFF);
667 count = blk_rq_sectors(req);
668 if (rq_data_dir(req)) {
669 /* Kick off write request */
670 dev_dbg(ace->dev, "write data\n");
671 ace->fsm_task = ACE_TASK_WRITE;
672 ace_out(ace, ACE_SECCNTCMD,
673 count | ACE_SECCNTCMD_WRITE_DATA);
674 } else {
675 /* Kick off read request */
676 dev_dbg(ace->dev, "read data\n");
677 ace->fsm_task = ACE_TASK_READ;
678 ace_out(ace, ACE_SECCNTCMD,
679 count | ACE_SECCNTCMD_READ_DATA);
682 /* As per datasheet, put config controller in reset */
683 val = ace_in(ace, ACE_CTRL);
684 ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET);
686 /* Move to the transfer state. The systemace will raise
687 * an interrupt once there is something to do
689 ace->fsm_state = ACE_FSM_STATE_REQ_TRANSFER;
690 if (ace->fsm_task == ACE_TASK_READ)
691 ace_fsm_yieldirq(ace); /* wait for data ready */
692 break;
694 case ACE_FSM_STATE_REQ_TRANSFER:
695 /* Check that the sysace is ready to receive data */
696 status = ace_in32(ace, ACE_STATUS);
697 if (status & ACE_STATUS_CFBSY) {
698 dev_dbg(ace->dev,
699 "CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n",
700 ace->fsm_task, ace->fsm_iter_num,
701 blk_rq_cur_sectors(ace->req) * 16,
702 ace->data_count, ace->in_irq);
703 ace_fsm_yield(ace); /* need to poll CFBSY bit */
704 break;
706 if (!(status & ACE_STATUS_DATABUFRDY)) {
707 dev_dbg(ace->dev,
708 "DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n",
709 ace->fsm_task, ace->fsm_iter_num,
710 blk_rq_cur_sectors(ace->req) * 16,
711 ace->data_count, ace->in_irq);
712 ace_fsm_yieldirq(ace);
713 break;
716 /* Transfer the next buffer */
717 if (ace->fsm_task == ACE_TASK_WRITE)
718 ace->reg_ops->dataout(ace);
719 else
720 ace->reg_ops->datain(ace);
721 ace->data_count--;
723 /* If there are still buffers to be transfers; jump out here */
724 if (ace->data_count != 0) {
725 ace_fsm_yieldirq(ace);
726 break;
729 /* bio finished; is there another one? */
730 if (__blk_end_request_cur(ace->req, 0)) {
731 /* dev_dbg(ace->dev, "next block; h=%u c=%u\n",
732 * blk_rq_sectors(ace->req),
733 * blk_rq_cur_sectors(ace->req));
735 ace->data_ptr = ace->req->buffer;
736 ace->data_count = blk_rq_cur_sectors(ace->req) * 16;
737 ace_fsm_yieldirq(ace);
738 break;
741 ace->fsm_state = ACE_FSM_STATE_REQ_COMPLETE;
742 break;
744 case ACE_FSM_STATE_REQ_COMPLETE:
745 ace->req = NULL;
747 /* Finished request; go to idle state */
748 ace->fsm_state = ACE_FSM_STATE_IDLE;
749 break;
751 default:
752 ace->fsm_state = ACE_FSM_STATE_IDLE;
753 break;
757 static void ace_fsm_tasklet(unsigned long data)
759 struct ace_device *ace = (void *)data;
760 unsigned long flags;
762 spin_lock_irqsave(&ace->lock, flags);
764 /* Loop over state machine until told to stop */
765 ace->fsm_continue_flag = 1;
766 while (ace->fsm_continue_flag)
767 ace_fsm_dostate(ace);
769 spin_unlock_irqrestore(&ace->lock, flags);
772 static void ace_stall_timer(unsigned long data)
774 struct ace_device *ace = (void *)data;
775 unsigned long flags;
777 dev_warn(ace->dev,
778 "kicking stalled fsm; state=%i task=%i iter=%i dc=%i\n",
779 ace->fsm_state, ace->fsm_task, ace->fsm_iter_num,
780 ace->data_count);
781 spin_lock_irqsave(&ace->lock, flags);
783 /* Rearm the stall timer *before* entering FSM (which may then
784 * delete the timer) */
785 mod_timer(&ace->stall_timer, jiffies + HZ);
787 /* Loop over state machine until told to stop */
788 ace->fsm_continue_flag = 1;
789 while (ace->fsm_continue_flag)
790 ace_fsm_dostate(ace);
792 spin_unlock_irqrestore(&ace->lock, flags);
795 /* ---------------------------------------------------------------------
796 * Interrupt handling routines
798 static int ace_interrupt_checkstate(struct ace_device *ace)
800 u32 sreg = ace_in32(ace, ACE_STATUS);
801 u16 creg = ace_in(ace, ACE_CTRL);
803 /* Check for error occurance */
804 if ((sreg & (ACE_STATUS_CFGERROR | ACE_STATUS_CFCERROR)) &&
805 (creg & ACE_CTRL_ERRORIRQ)) {
806 dev_err(ace->dev, "transfer failure\n");
807 ace_dump_regs(ace);
808 return -EIO;
811 return 0;
814 static irqreturn_t ace_interrupt(int irq, void *dev_id)
816 u16 creg;
817 struct ace_device *ace = dev_id;
819 /* be safe and get the lock */
820 spin_lock(&ace->lock);
821 ace->in_irq = 1;
823 /* clear the interrupt */
824 creg = ace_in(ace, ACE_CTRL);
825 ace_out(ace, ACE_CTRL, creg | ACE_CTRL_RESETIRQ);
826 ace_out(ace, ACE_CTRL, creg);
828 /* check for IO failures */
829 if (ace_interrupt_checkstate(ace))
830 ace->data_result = -EIO;
832 if (ace->fsm_task == 0) {
833 dev_err(ace->dev,
834 "spurious irq; stat=%.8x ctrl=%.8x cmd=%.4x\n",
835 ace_in32(ace, ACE_STATUS), ace_in32(ace, ACE_CTRL),
836 ace_in(ace, ACE_SECCNTCMD));
837 dev_err(ace->dev, "fsm_task=%i fsm_state=%i data_count=%i\n",
838 ace->fsm_task, ace->fsm_state, ace->data_count);
841 /* Loop over state machine until told to stop */
842 ace->fsm_continue_flag = 1;
843 while (ace->fsm_continue_flag)
844 ace_fsm_dostate(ace);
846 /* done with interrupt; drop the lock */
847 ace->in_irq = 0;
848 spin_unlock(&ace->lock);
850 return IRQ_HANDLED;
853 /* ---------------------------------------------------------------------
854 * Block ops
856 static void ace_request(struct request_queue * q)
858 struct request *req;
859 struct ace_device *ace;
861 req = ace_get_next_request(q);
863 if (req) {
864 ace = req->rq_disk->private_data;
865 tasklet_schedule(&ace->fsm_tasklet);
869 static int ace_media_changed(struct gendisk *gd)
871 struct ace_device *ace = gd->private_data;
872 dev_dbg(ace->dev, "ace_media_changed(): %i\n", ace->media_change);
874 return ace->media_change;
877 static int ace_revalidate_disk(struct gendisk *gd)
879 struct ace_device *ace = gd->private_data;
880 unsigned long flags;
882 dev_dbg(ace->dev, "ace_revalidate_disk()\n");
884 if (ace->media_change) {
885 dev_dbg(ace->dev, "requesting cf id and scheduling tasklet\n");
887 spin_lock_irqsave(&ace->lock, flags);
888 ace->id_req_count++;
889 spin_unlock_irqrestore(&ace->lock, flags);
891 tasklet_schedule(&ace->fsm_tasklet);
892 wait_for_completion(&ace->id_completion);
895 dev_dbg(ace->dev, "revalidate complete\n");
896 return ace->id_result;
899 static int ace_open(struct block_device *bdev, fmode_t mode)
901 struct ace_device *ace = bdev->bd_disk->private_data;
902 unsigned long flags;
904 dev_dbg(ace->dev, "ace_open() users=%i\n", ace->users + 1);
906 lock_kernel();
907 spin_lock_irqsave(&ace->lock, flags);
908 ace->users++;
909 spin_unlock_irqrestore(&ace->lock, flags);
911 check_disk_change(bdev);
912 unlock_kernel();
914 return 0;
917 static int ace_release(struct gendisk *disk, fmode_t mode)
919 struct ace_device *ace = disk->private_data;
920 unsigned long flags;
921 u16 val;
923 dev_dbg(ace->dev, "ace_release() users=%i\n", ace->users - 1);
925 lock_kernel();
926 spin_lock_irqsave(&ace->lock, flags);
927 ace->users--;
928 if (ace->users == 0) {
929 val = ace_in(ace, ACE_CTRL);
930 ace_out(ace, ACE_CTRL, val & ~ACE_CTRL_LOCKREQ);
932 spin_unlock_irqrestore(&ace->lock, flags);
933 unlock_kernel();
934 return 0;
937 static int ace_getgeo(struct block_device *bdev, struct hd_geometry *geo)
939 struct ace_device *ace = bdev->bd_disk->private_data;
940 u16 *cf_id = ace->cf_id;
942 dev_dbg(ace->dev, "ace_getgeo()\n");
944 geo->heads = cf_id[ATA_ID_HEADS];
945 geo->sectors = cf_id[ATA_ID_SECTORS];
946 geo->cylinders = cf_id[ATA_ID_CYLS];
948 return 0;
951 static const struct block_device_operations ace_fops = {
952 .owner = THIS_MODULE,
953 .open = ace_open,
954 .release = ace_release,
955 .media_changed = ace_media_changed,
956 .revalidate_disk = ace_revalidate_disk,
957 .getgeo = ace_getgeo,
960 /* --------------------------------------------------------------------
961 * SystemACE device setup/teardown code
963 static int __devinit ace_setup(struct ace_device *ace)
965 u16 version;
966 u16 val;
967 int rc;
969 dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
970 dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
971 (unsigned long long)ace->physaddr, ace->irq);
973 spin_lock_init(&ace->lock);
974 init_completion(&ace->id_completion);
977 * Map the device
979 ace->baseaddr = ioremap(ace->physaddr, 0x80);
980 if (!ace->baseaddr)
981 goto err_ioremap;
984 * Initialize the state machine tasklet and stall timer
986 tasklet_init(&ace->fsm_tasklet, ace_fsm_tasklet, (unsigned long)ace);
987 setup_timer(&ace->stall_timer, ace_stall_timer, (unsigned long)ace);
990 * Initialize the request queue
992 ace->queue = blk_init_queue(ace_request, &ace->lock);
993 if (ace->queue == NULL)
994 goto err_blk_initq;
995 blk_queue_logical_block_size(ace->queue, 512);
998 * Allocate and initialize GD structure
1000 ace->gd = alloc_disk(ACE_NUM_MINORS);
1001 if (!ace->gd)
1002 goto err_alloc_disk;
1004 ace->gd->major = ace_major;
1005 ace->gd->first_minor = ace->id * ACE_NUM_MINORS;
1006 ace->gd->fops = &ace_fops;
1007 ace->gd->queue = ace->queue;
1008 ace->gd->private_data = ace;
1009 snprintf(ace->gd->disk_name, 32, "xs%c", ace->id + 'a');
1011 /* set bus width */
1012 if (ace->bus_width == ACE_BUS_WIDTH_16) {
1013 /* 0x0101 should work regardless of endianess */
1014 ace_out_le16(ace, ACE_BUSMODE, 0x0101);
1016 /* read it back to determine endianess */
1017 if (ace_in_le16(ace, ACE_BUSMODE) == 0x0001)
1018 ace->reg_ops = &ace_reg_le16_ops;
1019 else
1020 ace->reg_ops = &ace_reg_be16_ops;
1021 } else {
1022 ace_out_8(ace, ACE_BUSMODE, 0x00);
1023 ace->reg_ops = &ace_reg_8_ops;
1026 /* Make sure version register is sane */
1027 version = ace_in(ace, ACE_VERSION);
1028 if ((version == 0) || (version == 0xFFFF))
1029 goto err_read;
1031 /* Put sysace in a sane state by clearing most control reg bits */
1032 ace_out(ace, ACE_CTRL, ACE_CTRL_FORCECFGMODE |
1033 ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ);
1035 /* Now we can hook up the irq handler */
1036 if (ace->irq != NO_IRQ) {
1037 rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace);
1038 if (rc) {
1039 /* Failure - fall back to polled mode */
1040 dev_err(ace->dev, "request_irq failed\n");
1041 ace->irq = NO_IRQ;
1045 /* Enable interrupts */
1046 val = ace_in(ace, ACE_CTRL);
1047 val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ;
1048 ace_out(ace, ACE_CTRL, val);
1050 /* Print the identification */
1051 dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
1052 (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
1053 dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
1054 (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq);
1056 ace->media_change = 1;
1057 ace_revalidate_disk(ace->gd);
1059 /* Make the sysace device 'live' */
1060 add_disk(ace->gd);
1062 return 0;
1064 err_read:
1065 put_disk(ace->gd);
1066 err_alloc_disk:
1067 blk_cleanup_queue(ace->queue);
1068 err_blk_initq:
1069 iounmap(ace->baseaddr);
1070 err_ioremap:
1071 dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
1072 (unsigned long long) ace->physaddr);
1073 return -ENOMEM;
1076 static void __devexit ace_teardown(struct ace_device *ace)
1078 if (ace->gd) {
1079 del_gendisk(ace->gd);
1080 put_disk(ace->gd);
1083 if (ace->queue)
1084 blk_cleanup_queue(ace->queue);
1086 tasklet_kill(&ace->fsm_tasklet);
1088 if (ace->irq != NO_IRQ)
1089 free_irq(ace->irq, ace);
1091 iounmap(ace->baseaddr);
1094 static int __devinit
1095 ace_alloc(struct device *dev, int id, resource_size_t physaddr,
1096 int irq, int bus_width)
1098 struct ace_device *ace;
1099 int rc;
1100 dev_dbg(dev, "ace_alloc(%p)\n", dev);
1102 if (!physaddr) {
1103 rc = -ENODEV;
1104 goto err_noreg;
1107 /* Allocate and initialize the ace device structure */
1108 ace = kzalloc(sizeof(struct ace_device), GFP_KERNEL);
1109 if (!ace) {
1110 rc = -ENOMEM;
1111 goto err_alloc;
1114 ace->dev = dev;
1115 ace->id = id;
1116 ace->physaddr = physaddr;
1117 ace->irq = irq;
1118 ace->bus_width = bus_width;
1120 /* Call the setup code */
1121 rc = ace_setup(ace);
1122 if (rc)
1123 goto err_setup;
1125 dev_set_drvdata(dev, ace);
1126 return 0;
1128 err_setup:
1129 dev_set_drvdata(dev, NULL);
1130 kfree(ace);
1131 err_alloc:
1132 err_noreg:
1133 dev_err(dev, "could not initialize device, err=%i\n", rc);
1134 return rc;
1137 static void __devexit ace_free(struct device *dev)
1139 struct ace_device *ace = dev_get_drvdata(dev);
1140 dev_dbg(dev, "ace_free(%p)\n", dev);
1142 if (ace) {
1143 ace_teardown(ace);
1144 dev_set_drvdata(dev, NULL);
1145 kfree(ace);
1149 /* ---------------------------------------------------------------------
1150 * Platform Bus Support
1153 static int __devinit ace_probe(struct platform_device *dev)
1155 resource_size_t physaddr = 0;
1156 int bus_width = ACE_BUS_WIDTH_16;
1157 int id = dev->id;
1158 int irq = NO_IRQ;
1159 int i;
1161 dev_dbg(&dev->dev, "ace_probe(%p)\n", dev);
1163 for (i = 0; i < dev->num_resources; i++) {
1164 if (dev->resource[i].flags & IORESOURCE_MEM)
1165 physaddr = dev->resource[i].start;
1166 if (dev->resource[i].flags & IORESOURCE_IRQ)
1167 irq = dev->resource[i].start;
1170 /* Call the bus-independant setup code */
1171 return ace_alloc(&dev->dev, id, physaddr, irq, bus_width);
1175 * Platform bus remove() method
1177 static int __devexit ace_remove(struct platform_device *dev)
1179 ace_free(&dev->dev);
1180 return 0;
1183 static struct platform_driver ace_platform_driver = {
1184 .probe = ace_probe,
1185 .remove = __devexit_p(ace_remove),
1186 .driver = {
1187 .owner = THIS_MODULE,
1188 .name = "xsysace",
1192 /* ---------------------------------------------------------------------
1193 * OF_Platform Bus Support
1196 #if defined(CONFIG_OF)
1197 static int __devinit
1198 ace_of_probe(struct platform_device *op, const struct of_device_id *match)
1200 struct resource res;
1201 resource_size_t physaddr;
1202 const u32 *id;
1203 int irq, bus_width, rc;
1205 dev_dbg(&op->dev, "ace_of_probe(%p, %p)\n", op, match);
1207 /* device id */
1208 id = of_get_property(op->dev.of_node, "port-number", NULL);
1210 /* physaddr */
1211 rc = of_address_to_resource(op->dev.of_node, 0, &res);
1212 if (rc) {
1213 dev_err(&op->dev, "invalid address\n");
1214 return rc;
1216 physaddr = res.start;
1218 /* irq */
1219 irq = irq_of_parse_and_map(op->dev.of_node, 0);
1221 /* bus width */
1222 bus_width = ACE_BUS_WIDTH_16;
1223 if (of_find_property(op->dev.of_node, "8-bit", NULL))
1224 bus_width = ACE_BUS_WIDTH_8;
1226 /* Call the bus-independant setup code */
1227 return ace_alloc(&op->dev, id ? *id : 0, physaddr, irq, bus_width);
1230 static int __devexit ace_of_remove(struct platform_device *op)
1232 ace_free(&op->dev);
1233 return 0;
1236 /* Match table for of_platform binding */
1237 static const struct of_device_id ace_of_match[] __devinitconst = {
1238 { .compatible = "xlnx,opb-sysace-1.00.b", },
1239 { .compatible = "xlnx,opb-sysace-1.00.c", },
1240 { .compatible = "xlnx,xps-sysace-1.00.a", },
1241 { .compatible = "xlnx,sysace", },
1244 MODULE_DEVICE_TABLE(of, ace_of_match);
1246 static struct of_platform_driver ace_of_driver = {
1247 .probe = ace_of_probe,
1248 .remove = __devexit_p(ace_of_remove),
1249 .driver = {
1250 .name = "xsysace",
1251 .owner = THIS_MODULE,
1252 .of_match_table = ace_of_match,
1256 /* Registration helpers to keep the number of #ifdefs to a minimum */
1257 static inline int __init ace_of_register(void)
1259 pr_debug("xsysace: registering OF binding\n");
1260 return of_register_platform_driver(&ace_of_driver);
1263 static inline void __exit ace_of_unregister(void)
1265 of_unregister_platform_driver(&ace_of_driver);
1267 #else /* CONFIG_OF */
1268 /* CONFIG_OF not enabled; do nothing helpers */
1269 static inline int __init ace_of_register(void) { return 0; }
1270 static inline void __exit ace_of_unregister(void) { }
1271 #endif /* CONFIG_OF */
1273 /* ---------------------------------------------------------------------
1274 * Module init/exit routines
1276 static int __init ace_init(void)
1278 int rc;
1280 ace_major = register_blkdev(ace_major, "xsysace");
1281 if (ace_major <= 0) {
1282 rc = -ENOMEM;
1283 goto err_blk;
1286 rc = ace_of_register();
1287 if (rc)
1288 goto err_of;
1290 pr_debug("xsysace: registering platform binding\n");
1291 rc = platform_driver_register(&ace_platform_driver);
1292 if (rc)
1293 goto err_plat;
1295 pr_info("Xilinx SystemACE device driver, major=%i\n", ace_major);
1296 return 0;
1298 err_plat:
1299 ace_of_unregister();
1300 err_of:
1301 unregister_blkdev(ace_major, "xsysace");
1302 err_blk:
1303 printk(KERN_ERR "xsysace: registration failed; err=%i\n", rc);
1304 return rc;
1307 static void __exit ace_exit(void)
1309 pr_debug("Unregistering Xilinx SystemACE driver\n");
1310 platform_driver_unregister(&ace_platform_driver);
1311 ace_of_unregister();
1312 unregister_blkdev(ace_major, "xsysace");
1315 module_init(ace_init);
1316 module_exit(ace_exit);