release/src-rt-6.x.4708/linux/linux-2.6.36/arch/sparc/include/asm/memreg.h

   1 #ifndef _SPARC_MEMREG_H
   2 #define _SPARC_MEMREG_H
   3 /* memreg.h:  Definitions of the values found in the synchronous
   4  *            and asynchronous memory error registers when a fault
   5  *            occurs on the sun4c.
   6  *
   7  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
   8  */
   9
  10 /* First the synchronous error codes, these are usually just
  11  * normal page faults.
  12  */
  13
  14 #define SUN4C_SYNC_WDRESET   0x0001  /* watchdog reset */
  15 #define SUN4C_SYNC_SIZE      0x0002  /* bad access size? whuz this? */
  16 #define SUN4C_SYNC_PARITY    0x0008  /* bad ram chips caused a parity error */
  17 #define SUN4C_SYNC_SBUS      0x0010  /* the SBUS had some problems... */
  18 #define SUN4C_SYNC_NOMEM     0x0020  /* translation to non-existent ram */
  19 #define SUN4C_SYNC_PROT      0x0040  /* access violated pte protections */
  20 #define SUN4C_SYNC_NPRESENT  0x0080  /* pte said that page was not present */
  21 #define SUN4C_SYNC_BADWRITE  0x8000  /* while writing something went bogus */
  22
  23 #define SUN4C_SYNC_BOLIXED  \
  24         (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \
  25          SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY)
  26
  27 /* Now the asynchronous error codes, these are almost always produced
  28  * by the cache writing things back to memory and getting a bad translation.
  29  * Bad DVMA transactions can cause these faults too.
  30  */
  31
  32 #define SUN4C_ASYNC_BADDVMA 0x0010  /* error during DVMA access */
  33 #define SUN4C_ASYNC_NOMEM   0x0020  /* write back pointed to bad phys addr */
  34 #define SUN4C_ASYNC_BADWB   0x0080  /* write back points to non-present page */
  35
  36 /* Memory parity error register with associated bit constants. */
  37 #ifndef __ASSEMBLY__
  38 extern __volatile__ unsigned long __iomem *sun4c_memerr_reg;
  39 #endif
  40
  41 #define SUN4C_MPE_ERROR 0x80    /* Parity error detected. (ro) */
  42 #define SUN4C_MPE_MULTI 0x40    /* Multiple parity errors detected. (ro) */
  43 #define SUN4C_MPE_TEST  0x20    /* Write inverse parity. (rw) */
  44 #define SUN4C_MPE_CHECK 0x10    /* Enable parity checking. (rw) */
  45 #define SUN4C_MPE_ERR00 0x08    /* Parity error in bits 0-7. (ro) */
  46 #define SUN4C_MPE_ERR08 0x04    /* Parity error in bits 8-15. (ro) */
  47 #define SUN4C_MPE_ERR16 0x02    /* Parity error in bits 16-23. (ro) */
  48 #define SUN4C_MPE_ERR24 0x01    /* Parity error in bits 24-31. (ro) */
  49 #define SUN4C_MPE_ERRS  0x0F    /* Bit mask for the error bits. (ro) */
  50
  51 #endif /* !(_SPARC_MEMREG_H) */