release/src-rt-6.x.4708/linux/linux-2.6.36/arch/m68k/include/asm/dma.h

   1 #ifndef _M68K_DMA_H
   2 #define _M68K_DMA_H 1
   3
   4 #ifdef CONFIG_COLDFIRE
   5 /*
   6  * ColdFire DMA Model:
   7  *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
   8  * address mode emits a source address, and expects that the device will either
   9  * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
  10  * the device will place data on the correct byte(s) of the data bus, as the
  11  * memory transactions are always 32 bits. This implies that only 32 bit
  12  * devices will find single mode transfers useful. Dual address DMA mode
  13  * performs two cycles: source read and destination write. ColdFire will
  14  * align the data so that the device will always get the correct bytes, thus
  15  * is useful for 8 and 16 bit devices. This is the mode that is supported
  16  * below.
  17  *
  18  * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
  19  *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
  20  *
  21  * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
  22  *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
  23  *
  24  * APR/18/2002 : added proper support for MCF5272 DMA controller.
  25  *               Arthur Shipkowski (art@videon-central.com)
  26  */
  27
  28 #include <asm/coldfire.h>
  29 #include <asm/mcfsim.h>
  30 #include <asm/mcfdma.h>
  31
  32 /*
  33  * Set number of channels of DMA on ColdFire for different implementations.
  34  */
  35 #if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
  36         defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
  37 #define MAX_M68K_DMA_CHANNELS 4
  38 #elif defined(CONFIG_M5272)
  39 #define MAX_M68K_DMA_CHANNELS 1
  40 #elif defined(CONFIG_M532x)
  41 #define MAX_M68K_DMA_CHANNELS 0
  42 #else
  43 #define MAX_M68K_DMA_CHANNELS 2
  44 #endif
  45
  46 extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
  47 extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
  48
  49 #if !defined(CONFIG_M5272)
  50 #define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
  51 #define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
  52 #define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
  53 #define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
  54
  55 /* I/O to memory, 8 bits, mode */
  56 #define DMA_MODE_READ               0
  57 /* memory to I/O, 8 bits, mode */
  58 #define DMA_MODE_WRITE              1
  59 /* I/O to memory, 16 bits, mode */
  60 #define DMA_MODE_READ_WORD          2
  61 /* memory to I/O, 16 bits, mode */
  62 #define DMA_MODE_WRITE_WORD         3
  63 /* I/O to memory, 32 bits, mode */
  64 #define DMA_MODE_READ_LONG          4
  65 /* memory to I/O, 32 bits, mode */
  66 #define DMA_MODE_WRITE_LONG         5
  67 /* I/O to memory, 8 bits, single-address-mode */
  68 #define DMA_MODE_READ_SINGLE        8
  69 /* memory to I/O, 8 bits, single-address-mode */
  70 #define DMA_MODE_WRITE_SINGLE       9
  71 /* I/O to memory, 16 bits, single-address-mode */
  72 #define DMA_MODE_READ_WORD_SINGLE  10
  73 /* memory to I/O, 16 bits, single-address-mode */
  74 #define DMA_MODE_WRITE_WORD_SINGLE 11
  75 /* I/O to memory, 32 bits, single-address-mode */
  76 #define DMA_MODE_READ_LONG_SINGLE  12
  77 /* memory to I/O, 32 bits, single-address-mode */
  78 #define DMA_MODE_WRITE_LONG_SINGLE 13
  79
  80 #else /* CONFIG_M5272 is defined */
  81
  82 /* Source static-address mode */
  83 #define DMA_MODE_SRC_SA_BIT 0x01
  84 /* Two bits to select between all four modes */
  85 #define DMA_MODE_SSIZE_MASK 0x06
  86 /* Offset to shift bits in */
  87 #define DMA_MODE_SSIZE_OFF  0x01
  88 /* Destination static-address mode */
  89 #define DMA_MODE_DES_SA_BIT 0x10
  90 /* Two bits to select between all four modes */
  91 #define DMA_MODE_DSIZE_MASK 0x60
  92 /* Offset to shift bits in */
  93 #define DMA_MODE_DSIZE_OFF  0x05
  94 /* Size modifiers */
  95 #define DMA_MODE_SIZE_LONG  0x00
  96 #define DMA_MODE_SIZE_BYTE  0x01
  97 #define DMA_MODE_SIZE_WORD  0x02
  98 #define DMA_MODE_SIZE_LINE  0x03
  99
 100 /*
 101  * Aliases to help speed quick ports; these may be suboptimal, however. They
 102  * do not include the SINGLE mode modifiers since the MCF5272 does not have a
 103  * mode where the device is in control of its addressing.
 104  */
 105
 106 /* I/O to memory, 8 bits, mode */
 107 #define DMA_MODE_READ                 ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
 108 /* memory to I/O, 8 bits, mode */
 109 #define DMA_MODE_WRITE              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
 110 /* I/O to memory, 16 bits, mode */
 111 #define DMA_MODE_READ_WORD              ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
 112 /* memory to I/O, 16 bits, mode */
 113 #define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
 114 /* I/O to memory, 32 bits, mode */
 115 #define DMA_MODE_READ_LONG              ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
 116 /* memory to I/O, 32 bits, mode */
 117 #define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
 118
 119 #endif /* !defined(CONFIG_M5272) */
 120
 121 #if !defined(CONFIG_M5272)
 122 /* enable/disable a specific DMA channel */
 123 static __inline__ void enable_dma(unsigned int dmanr)
 124 {
 125   volatile unsigned short *dmawp;
 126
 127 #ifdef DMA_DEBUG
 128   printk("enable_dma(dmanr=%d)\n", dmanr);
 129 #endif
 130
 131   dmawp = (unsigned short *) dma_base_addr[dmanr];
 132   dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
 133 }
 134
 135 static __inline__ void disable_dma(unsigned int dmanr)
 136 {
 137   volatile unsigned short *dmawp;
 138   volatile unsigned char  *dmapb;
 139
 140 #ifdef DMA_DEBUG
 141   printk("disable_dma(dmanr=%d)\n", dmanr);
 142 #endif
 143
 144   dmawp = (unsigned short *) dma_base_addr[dmanr];
 145   dmapb = (unsigned char *) dma_base_addr[dmanr];
 146
 147   /* Turn off external requests, and stop any DMA in progress */
 148   dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
 149   dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
 150 }
 151
 152 /*
 153  * Clear the 'DMA Pointer Flip Flop'.
 154  * Write 0 for LSB/MSB, 1 for MSB/LSB access.
 155  * Use this once to initialize the FF to a known state.
 156  * After that, keep track of it. :-)
 157  * --- In order to do that, the DMA routines below should ---
 158  * --- only be used while interrupts are disabled! ---
 159  *
 160  * This is a NOP for ColdFire. Provide a stub for compatibility.
 161  */
 162 static __inline__ void clear_dma_ff(unsigned int dmanr)
 163 {
 164 }
 165
 166 /* set mode (above) for a specific DMA channel */
 167 static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
 168 {
 169
 170   volatile unsigned char  *dmabp;
 171   volatile unsigned short *dmawp;
 172
 173 #ifdef DMA_DEBUG
 174   printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
 175 #endif
 176
 177   dmabp = (unsigned char *) dma_base_addr[dmanr];
 178   dmawp = (unsigned short *) dma_base_addr[dmanr];
 179
 180   /* Clear config errors */
 181   dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
 182
 183   /* Set command register */
 184   dmawp[MCFDMA_DCR] =
 185     MCFDMA_DCR_INT |         /* Enable completion irq */
 186     MCFDMA_DCR_CS |          /* Force one xfer per request */
 187     MCFDMA_DCR_AA |          /* Enable auto alignment */
 188     /* single-address-mode */
 189     ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
 190     /* sets s_rw (-> r/w) high if Memory to I/0 */
 191     ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
 192     /* Memory to I/O or I/O to Memory */
 193     ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
 194     /* 32 bit, 16 bit or 8 bit transfers */
 195     ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD :
 196      ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
 197                                    MCFDMA_DCR_SSIZE_BYTE)) |
 198     ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
 199      ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
 200                                    MCFDMA_DCR_DSIZE_BYTE));
 201
 202 #ifdef DEBUG_DMA
 203   printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
 204          dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
 205          (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
 206 #endif
 207 }
 208
 209 /* Set transfer address for specific DMA channel */
 210 static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
 211 {
 212   volatile unsigned short *dmawp;
 213   volatile unsigned int   *dmalp;
 214
 215 #ifdef DMA_DEBUG
 216   printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
 217 #endif
 218
 219   dmawp = (unsigned short *) dma_base_addr[dmanr];
 220   dmalp = (unsigned int *) dma_base_addr[dmanr];
 221
 222   /* Determine which address registers are used for memory/device accesses */
 223   if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
 224     /* Source incrementing, must be memory */
 225     dmalp[MCFDMA_SAR] = a;
 226     /* Set dest address, must be device */
 227     dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
 228   } else {
 229     /* Destination incrementing, must be memory */
 230     dmalp[MCFDMA_DAR] = a;
 231     /* Set source address, must be device */
 232     dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
 233   }
 234
 235 #ifdef DEBUG_DMA
 236   printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
 237         __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
 238         (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
 239         (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
 240 #endif
 241 }
 242
 243 /*
 244  * Specific for Coldfire - sets device address.
 245  * Should be called after the mode set call, and before set DMA address.
 246  */
 247 static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
 248 {
 249 #ifdef DMA_DEBUG
 250   printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
 251 #endif
 252
 253   dma_device_address[dmanr] = a;
 254 }
 255
 256 /*
 257  * NOTE 2: "count" represents _bytes_.
 258  */
 259 static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
 260 {
 261   volatile unsigned short *dmawp;
 262
 263 #ifdef DMA_DEBUG
 264   printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
 265 #endif
 266
 267   dmawp = (unsigned short *) dma_base_addr[dmanr];
 268   dmawp[MCFDMA_BCR] = (unsigned short)count;
 269 }
 270
 271 /*
 272  * Get DMA residue count. After a DMA transfer, this
 273  * should return zero. Reading this while a DMA transfer is
 274  * still in progress will return unpredictable results.
 275  * Otherwise, it returns the number of _bytes_ left to transfer.
 276  */
 277 static __inline__ int get_dma_residue(unsigned int dmanr)
 278 {
 279   volatile unsigned short *dmawp;
 280   unsigned short count;
 281
 282 #ifdef DMA_DEBUG
 283   printk("get_dma_residue(dmanr=%d)\n", dmanr);
 284 #endif
 285
 286   dmawp = (unsigned short *) dma_base_addr[dmanr];
 287   count = dmawp[MCFDMA_BCR];
 288   return((int) count);
 289 }
 290 #else /* CONFIG_M5272 is defined */
 291
 292 /*
 293  * The MCF5272 DMA controller is very different than the controller defined above
 294  * in terms of register mapping.  For instance, with the exception of the 16-bit
 295  * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
 296  *
 297  * The big difference, however, is the lack of device-requested DMA.  All modes
 298  * are dual address transfer, and there is no 'device' setup or direction bit.
 299  * You can DMA between a device and memory, between memory and memory, or even between
 300  * two devices directly, with any combination of incrementing and non-incrementing
 301  * addresses you choose.  This puts a crimp in distinguishing between the 'device
 302  * address' set up by set_dma_device_addr.
 303  *
 304  * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
 305  * which will act exactly as above in -- it will look to see if the source is set to
 306  * autoincrement, and if so it will make the source use the set_dma_addr value and the
 307  * destination the set_dma_device_addr value.  Otherwise the source will be set to the
 308  * set_dma_device_addr value and the destination will get the set_dma_addr value.
 309  *
 310  * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
 311  * and make it explicit.  Depending on what you're doing, one of these two should work
 312  * for you, but don't mix them in the same transfer setup.
 313  */
 314
 315 /* enable/disable a specific DMA channel */
 316 static __inline__ void enable_dma(unsigned int dmanr)
 317 {
 318   volatile unsigned int  *dmalp;
 319
 320 #ifdef DMA_DEBUG
 321   printk("enable_dma(dmanr=%d)\n", dmanr);
 322 #endif
 323
 324   dmalp = (unsigned int *) dma_base_addr[dmanr];
 325   dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
 326 }
 327
 328 static __inline__ void disable_dma(unsigned int dmanr)
 329 {
 330   volatile unsigned int   *dmalp;
 331
 332 #ifdef DMA_DEBUG
 333   printk("disable_dma(dmanr=%d)\n", dmanr);
 334 #endif
 335
 336   dmalp = (unsigned int *) dma_base_addr[dmanr];
 337
 338   /* Turn off external requests, and stop any DMA in progress */
 339   dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
 340   dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
 341 }
 342
 343 /*
 344  * Clear the 'DMA Pointer Flip Flop'.
 345  * Write 0 for LSB/MSB, 1 for MSB/LSB access.
 346  * Use this once to initialize the FF to a known state.
 347  * After that, keep track of it. :-)
 348  * --- In order to do that, the DMA routines below should ---
 349  * --- only be used while interrupts are disabled! ---
 350  *
 351  * This is a NOP for ColdFire. Provide a stub for compatibility.
 352  */
 353 static __inline__ void clear_dma_ff(unsigned int dmanr)
 354 {
 355 }
 356
 357 /* set mode (above) for a specific DMA channel */
 358 static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
 359 {
 360
 361   volatile unsigned int   *dmalp;
 362   volatile unsigned short *dmawp;
 363
 364 #ifdef DMA_DEBUG
 365   printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
 366 #endif
 367   dmalp = (unsigned int *) dma_base_addr[dmanr];
 368   dmawp = (unsigned short *) dma_base_addr[dmanr];
 369
 370   /* Clear config errors */
 371   dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
 372
 373   /* Set command register */
 374   dmalp[MCFDMA_DMR] =
 375     MCFDMA_DMR_RQM_DUAL |         /* Mandatory Request Mode setting */
 376     MCFDMA_DMR_DSTT_SD  |         /* Set up addressing types; set to supervisor-data. */
 377     MCFDMA_DMR_SRCT_SD  |         /* Set up addressing types; set to supervisor-data. */
 378     /* source static-address-mode */
 379     ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
 380     /* dest static-address-mode */
 381     ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
 382     /* burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 */
 383     (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
 384     (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
 385
 386   dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
 387
 388 #ifdef DEBUG_DMA
 389   printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
 390          dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
 391          (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
 392 #endif
 393 }
 394
 395 /* Set transfer address for specific DMA channel */
 396 static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
 397 {
 398   volatile unsigned int   *dmalp;
 399
 400 #ifdef DMA_DEBUG
 401   printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
 402 #endif
 403
 404   dmalp = (unsigned int *) dma_base_addr[dmanr];
 405
 406   /* Determine which address registers are used for memory/device accesses */
 407   if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
 408     /* Source incrementing, must be memory */
 409     dmalp[MCFDMA_DSAR] = a;
 410     /* Set dest address, must be device */
 411     dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
 412   } else {
 413     /* Destination incrementing, must be memory */
 414     dmalp[MCFDMA_DDAR] = a;
 415     /* Set source address, must be device */
 416     dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
 417   }
 418
 419 #ifdef DEBUG_DMA
 420   printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
 421         __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
 422         (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
 423         (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
 424 #endif
 425 }
 426
 427 /*
 428  * Specific for Coldfire - sets device address.
 429  * Should be called after the mode set call, and before set DMA address.
 430  */
 431 static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
 432 {
 433 #ifdef DMA_DEBUG
 434   printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
 435 #endif
 436
 437   dma_device_address[dmanr] = a;
 438 }
 439
 440 /*
 441  * NOTE 2: "count" represents _bytes_.
 442  *
 443  * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
 444  */
 445 static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
 446 {
 447   volatile unsigned int *dmalp;
 448
 449 #ifdef DMA_DEBUG
 450   printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
 451 #endif
 452
 453   dmalp = (unsigned int *) dma_base_addr[dmanr];
 454   dmalp[MCFDMA_DBCR] = count;
 455 }
 456
 457 /*
 458  * Get DMA residue count. After a DMA transfer, this
 459  * should return zero. Reading this while a DMA transfer is
 460  * still in progress will return unpredictable results.
 461  * Otherwise, it returns the number of _bytes_ left to transfer.
 462  */
 463 static __inline__ int get_dma_residue(unsigned int dmanr)
 464 {
 465   volatile unsigned int *dmalp;
 466   unsigned int count;
 467
 468 #ifdef DMA_DEBUG
 469   printk("get_dma_residue(dmanr=%d)\n", dmanr);
 470 #endif
 471
 472   dmalp = (unsigned int *) dma_base_addr[dmanr];
 473   count = dmalp[MCFDMA_DBCR];
 474   return(count);
 475 }
 476
 477 #endif /* !defined(CONFIG_M5272) */
 478 #endif /* CONFIG_COLDFIRE */
 479
 480 /* it's useless on the m68k, but unfortunately needed by the new
 481    bootmem allocator (but this should do it for this) */
 482 #define MAX_DMA_ADDRESS PAGE_OFFSET
 483
 484 #define MAX_DMA_CHANNELS 8
 485
 486 extern int request_dma(unsigned int dmanr, const char * device_id);     /* reserve a DMA channel */
 487 extern void free_dma(unsigned int dmanr);       /* release it again */
 488
 489 #define isa_dma_bridge_buggy    (0)
 490
 491 #endif /* _M68K_DMA_H */