release/src-rt-6.x.4708/linux/linux-2.6.36/arch/ia64/include/asm/system.h

   1 #ifndef _ASM_IA64_SYSTEM_H
   2 #define _ASM_IA64_SYSTEM_H
   3
   4 /*
   5  * System defines. Note that this is included both from .c and .S
   6  * files, so it does only defines, not any C code.  This is based
   7  * on information published in the Processor Abstraction Layer
   8  * and the System Abstraction Layer manual.
   9  *
  10  * Copyright (C) 1998-2003 Hewlett-Packard Co
  11  *      David Mosberger-Tang <davidm@hpl.hp.com>
  12  * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
  13  * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
  14  */
  15
  16 #include <asm/kregs.h>
  17 #include <asm/page.h>
  18 #include <asm/pal.h>
  19 #include <asm/percpu.h>
  20
  21 #define GATE_ADDR               RGN_BASE(RGN_GATE)
  22
  23 /*
  24  * 0xa000000000000000+2*PERCPU_PAGE_SIZE
  25  * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
  26  */
  27 #define KERNEL_START             (GATE_ADDR+__IA64_UL_CONST(0x100000000))
  28 #define PERCPU_ADDR             (-PERCPU_PAGE_SIZE)
  29 #define LOAD_OFFSET             (KERNEL_START - KERNEL_TR_PAGE_SIZE)
  30
  31 #ifndef __ASSEMBLY__
  32
  33 #include <linux/kernel.h>
  34 #include <linux/types.h>
  35
  36 #define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */
  37
  38 struct pci_vector_struct {
  39         __u16 segment;  /* PCI Segment number */
  40         __u16 bus;      /* PCI Bus number */
  41         __u32 pci_id;   /* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
  42         __u8 pin;       /* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
  43         __u32 irq;      /* IRQ assigned */
  44 };
  45
  46 extern struct ia64_boot_param {
  47         __u64 command_line;             /* physical address of command line arguments */
  48         __u64 efi_systab;               /* physical address of EFI system table */
  49         __u64 efi_memmap;               /* physical address of EFI memory map */
  50         __u64 efi_memmap_size;          /* size of EFI memory map */
  51         __u64 efi_memdesc_size;         /* size of an EFI memory map descriptor */
  52         __u32 efi_memdesc_version;      /* memory descriptor version */
  53         struct {
  54                 __u16 num_cols; /* number of columns on console output device */
  55                 __u16 num_rows; /* number of rows on console output device */
  56                 __u16 orig_x;   /* cursor's x position */
  57                 __u16 orig_y;   /* cursor's y position */
  58         } console_info;
  59         __u64 fpswa;            /* physical address of the fpswa interface */
  60         __u64 initrd_start;
  61         __u64 initrd_size;
  62 } *ia64_boot_param;
  63
  64 /*
  65  * Macros to force memory ordering.  In these descriptions, "previous"
  66  * and "subsequent" refer to program order; "visible" means that all
  67  * architecturally visible effects of a memory access have occurred
  68  * (at a minimum, this means the memory has been read or written).
  69  *
  70  *   wmb():     Guarantees that all preceding stores to memory-
  71  *              like regions are visible before any subsequent
  72  *              stores and that all following stores will be
  73  *              visible only after all previous stores.
  74  *   rmb():     Like wmb(), but for reads.
  75  *   mb():      wmb()/rmb() combo, i.e., all previous memory
  76  *              accesses are visible before all subsequent
  77  *              accesses and vice versa.  This is also known as
  78  *              a "fence."
  79  *
  80  * Note: "mb()" and its variants cannot be used as a fence to order
  81  * accesses to memory mapped I/O registers.  For that, mf.a needs to
  82  * be used.  However, we don't want to always use mf.a because (a)
  83  * it's (presumably) much slower than mf and (b) mf.a is supported for
  84  * sequential memory pages only.
  85  */
  86 #define mb()    ia64_mf()
  87 #define rmb()   mb()
  88 #define wmb()   mb()
  89 #define read_barrier_depends()  do { } while(0)
  90
  91 #ifdef CONFIG_SMP
  92 # define smp_mb()       mb()
  93 # define smp_rmb()      rmb()
  94 # define smp_wmb()      wmb()
  95 # define smp_read_barrier_depends()     read_barrier_depends()
  96 #else
  97 # define smp_mb()       barrier()
  98 # define smp_rmb()      barrier()
  99 # define smp_wmb()      barrier()
 100 # define smp_read_barrier_depends()     do { } while(0)
 101 #endif
 102
 103 #define set_mb(var, value)      do { (var) = (value); mb(); } while (0)
 104
 105 #define safe_halt()         ia64_pal_halt_light()    /* PAL_HALT_LIGHT */
 106
 107 /*
 108  * The group barrier in front of the rsm & ssm are necessary to ensure
 109  * that none of the previous instructions in the same group are
 110  * affected by the rsm/ssm.
 111  */
 112 /* For spinlocks etc */
 113
 114 /*
 115  * - clearing psr.i is implicitly serialized (visible by next insn)
 116  * - setting psr.i requires data serialization
 117  * - we need a stop-bit before reading PSR because we sometimes
 118  *   write a floating-point register right before reading the PSR
 119  *   and that writes to PSR.mfl
 120  */
 121 #ifdef CONFIG_PARAVIRT
 122 #define __local_save_flags()    ia64_get_psr_i()
 123 #else
 124 #define __local_save_flags()    ia64_getreg(_IA64_REG_PSR)
 125 #endif
 126
 127 #define __local_irq_save(x)                     \
 128 do {                                            \
 129         ia64_stop();                            \
 130         (x) = __local_save_flags();             \
 131         ia64_stop();                            \
 132         ia64_rsm(IA64_PSR_I);                   \
 133 } while (0)
 134
 135 #define __local_irq_disable()                   \
 136 do {                                            \
 137         ia64_stop();                            \
 138         ia64_rsm(IA64_PSR_I);                   \
 139 } while (0)
 140
 141 #define __local_irq_restore(x)  ia64_intrin_local_irq_restore((x) & IA64_PSR_I)
 142
 143 #ifdef CONFIG_IA64_DEBUG_IRQ
 144
 145   extern unsigned long last_cli_ip;
 146
 147 # define __save_ip()            last_cli_ip = ia64_getreg(_IA64_REG_IP)
 148
 149 # define local_irq_save(x)                                      \
 150 do {                                                            \
 151         unsigned long __psr;                                    \
 152                                                                 \
 153         __local_irq_save(__psr);                                \
 154         if (__psr & IA64_PSR_I)                                 \
 155                 __save_ip();                                    \
 156         (x) = __psr;                                            \
 157 } while (0)
 158
 159 # define local_irq_disable()    do { unsigned long __x; local_irq_save(__x); } while (0)
 160
 161 # define local_irq_restore(x)                                   \
 162 do {                                                            \
 163         unsigned long __old_psr, __psr = (x);                   \
 164                                                                 \
 165         local_save_flags(__old_psr);                            \
 166         __local_irq_restore(__psr);                             \
 167         if ((__old_psr & IA64_PSR_I) && !(__psr & IA64_PSR_I))  \
 168                 __save_ip();                                    \
 169 } while (0)
 170
 171 #else /* !CONFIG_IA64_DEBUG_IRQ */
 172 # define local_irq_save(x)      __local_irq_save(x)
 173 # define local_irq_disable()    __local_irq_disable()
 174 # define local_irq_restore(x)   __local_irq_restore(x)
 175 #endif /* !CONFIG_IA64_DEBUG_IRQ */
 176
 177 #define local_irq_enable()      ({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); })
 178 #define local_save_flags(flags) ({ ia64_stop(); (flags) = __local_save_flags(); })
 179
 180 #define irqs_disabled()                         \
 181 ({                                              \
 182         unsigned long __ia64_id_flags;          \
 183         local_save_flags(__ia64_id_flags);      \
 184         (__ia64_id_flags & IA64_PSR_I) == 0;    \
 185 })
 186
 187 #ifdef __KERNEL__
 188
 189 /*
 190  * Context switch from one thread to another.  If the two threads have
 191  * different address spaces, schedule() has already taken care of
 192  * switching to the new address space by calling switch_mm().
 193  *
 194  * Disabling access to the fph partition and the debug-register
 195  * context switch MUST be done before calling ia64_switch_to() since a
 196  * newly created thread returns directly to
 197  * ia64_ret_from_syscall_clear_r8.
 198  */
 199 extern struct task_struct *ia64_switch_to (void *next_task);
 200
 201 struct task_struct;
 202
 203 extern void ia64_save_extra (struct task_struct *task);
 204 extern void ia64_load_extra (struct task_struct *task);
 205
 206 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 207 extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct *next);
 208 # define IA64_ACCOUNT_ON_SWITCH(p,n) ia64_account_on_switch(p,n)
 209 #else
 210 # define IA64_ACCOUNT_ON_SWITCH(p,n)
 211 #endif
 212
 213 #ifdef CONFIG_PERFMON
 214   DECLARE_PER_CPU(unsigned long, pfm_syst_info);
 215 # define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
 216 #else
 217 # define PERFMON_IS_SYSWIDE() (0)
 218 #endif
 219
 220 #define IA64_HAS_EXTRA_STATE(t)                                                 \
 221         ((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID)       \
 222          || PERFMON_IS_SYSWIDE())
 223
 224 #define __switch_to(prev,next,last) do {                                                         \
 225         IA64_ACCOUNT_ON_SWITCH(prev, next);                                                      \
 226         if (IA64_HAS_EXTRA_STATE(prev))                                                          \
 227                 ia64_save_extra(prev);                                                           \
 228         if (IA64_HAS_EXTRA_STATE(next))                                                          \
 229                 ia64_load_extra(next);                                                           \
 230         ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next);                      \
 231         (last) = ia64_switch_to((next));                                                         \
 232 } while (0)
 233
 234 #ifdef CONFIG_SMP
 235 /*
 236  * In the SMP case, we save the fph state when context-switching away from a thread that
 237  * modified fph.  This way, when the thread gets scheduled on another CPU, the CPU can
 238  * pick up the state from task->thread.fph, avoiding the complication of having to fetch
 239  * the latest fph state from another CPU.  In other words: eager save, lazy restore.
 240  */
 241 # define switch_to(prev,next,last) do {                                         \
 242         if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) {                               \
 243                 ia64_psr(task_pt_regs(prev))->mfh = 0;                  \
 244                 (prev)->thread.flags |= IA64_THREAD_FPH_VALID;                  \
 245                 __ia64_save_fpu((prev)->thread.fph);                            \
 246         }                                                                       \
 247         __switch_to(prev, next, last);                                          \
 248         /* "next" in old context is "current" in new context */                 \
 249         if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) &&        \
 250                      (task_cpu(current) !=                                     \
 251                                       task_thread_info(current)->last_cpu))) { \
 252                 platform_migrate(current);                                     \
 253                 task_thread_info(current)->last_cpu = task_cpu(current);       \
 254         }                                                                      \
 255 } while (0)
 256 #else
 257 # define switch_to(prev,next,last)      __switch_to(prev, next, last)
 258 #endif
 259
 260 #define __ARCH_WANT_UNLOCKED_CTXSW
 261 #define ARCH_HAS_PREFETCH_SWITCH_STACK
 262 #define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
 263
 264 void cpu_idle_wait(void);
 265
 266 #define arch_align_stack(x) (x)
 267
 268 void default_idle(void);
 269
 270 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 271 extern void account_system_vtime(struct task_struct *);
 272 #endif
 273
 274 #endif /* __KERNEL__ */
 275
 276 #endif /* __ASSEMBLY__ */
 277
 278 #endif /* _ASM_IA64_SYSTEM_H */