release/src-rt-6.x.4708/linux/linux-2.6.36/arch/blackfin/include/asm/bfin_rotary.h

   1 /*
   2  * board initialization should put one of these structures into platform_data
   3  * and place the bfin-rotary onto platform_bus named "bfin-rotary".
   4  *
   5  * Copyright 2008-2010 Analog Devices Inc.
   6  *
   7  * Licensed under the GPL-2 or later.
   8  */
   9
  10 #ifndef _BFIN_ROTARY_H
  11 #define _BFIN_ROTARY_H
  12
  13 /* mode bitmasks */
  14 #define ROT_QUAD_ENC    CNTMODE_QUADENC /* quadrature/grey code encoder mode */
  15 #define ROT_BIN_ENC     CNTMODE_BINENC  /* binary encoder mode */
  16 #define ROT_UD_CNT      CNTMODE_UDCNT   /* rotary counter mode */
  17 #define ROT_DIR_CNT     CNTMODE_DIRCNT  /* direction counter mode */
  18
  19 #define ROT_DEBE        DEBE            /* Debounce Enable */
  20
  21 #define ROT_CDGINV      CDGINV          /* CDG Pin Polarity Invert */
  22 #define ROT_CUDINV      CUDINV          /* CUD Pin Polarity Invert */
  23 #define ROT_CZMINV      CZMINV          /* CZM Pin Polarity Invert */
  24
  25 struct bfin_rotary_platform_data {
  26         /* set rotary UP KEY_### or BTN_### in case you prefer
  27          * bfin-rotary to send EV_KEY otherwise set 0
  28          */
  29         unsigned int rotary_up_key;
  30         /* set rotary DOWN KEY_### or BTN_### in case you prefer
  31          * bfin-rotary to send EV_KEY otherwise set 0
  32          */
  33         unsigned int rotary_down_key;
  34         /* set rotary BUTTON KEY_### or BTN_### */
  35         unsigned int rotary_button_key;
  36         /* set rotary Relative Axis REL_### in case you prefer
  37          * bfin-rotary to send EV_REL otherwise set 0
  38          */
  39         unsigned int rotary_rel_code;
  40         unsigned short debounce;        /* 0..17 */
  41         unsigned short mode;
  42 };
  43
  44 /* CNT_CONFIG bitmasks */
  45 #define CNTE            (1 << 0)        /* Counter Enable */
  46 #define DEBE            (1 << 1)        /* Debounce Enable */
  47 #define CDGINV          (1 << 4)        /* CDG Pin Polarity Invert */
  48 #define CUDINV          (1 << 5)        /* CUD Pin Polarity Invert */
  49 #define CZMINV          (1 << 6)        /* CZM Pin Polarity Invert */
  50 #define CNTMODE_SHIFT   8
  51 #define CNTMODE         (0x7 << CNTMODE_SHIFT)  /* Counter Operating Mode */
  52 #define ZMZC            (1 << 1)        /* CZM Zeroes Counter Enable */
  53 #define BNDMODE_SHIFT   12
  54 #define BNDMODE         (0x3 << BNDMODE_SHIFT)  /* Boundary register Mode */
  55 #define INPDIS          (1 << 15)       /* CUG and CDG Input Disable */
  56
  57 #define CNTMODE_QUADENC (0 << CNTMODE_SHIFT)    /* quadrature encoder mode */
  58 #define CNTMODE_BINENC  (1 << CNTMODE_SHIFT)    /* binary encoder mode */
  59 #define CNTMODE_UDCNT   (2 << CNTMODE_SHIFT)    /* up/down counter mode */
  60 #define CNTMODE_DIRCNT  (4 << CNTMODE_SHIFT)    /* direction counter mode */
  61 #define CNTMODE_DIRTMR  (5 << CNTMODE_SHIFT)    /* direction timer mode */
  62
  63 #define BNDMODE_COMP    (0 << BNDMODE_SHIFT)    /* boundary compare mode */
  64 #define BNDMODE_ZERO    (1 << BNDMODE_SHIFT)    /* boundary compare and zero mode */
  65 #define BNDMODE_CAPT    (2 << BNDMODE_SHIFT)    /* boundary capture mode */
  66 #define BNDMODE_AEXT    (3 << BNDMODE_SHIFT)    /* boundary auto-extend mode */
  67
  68 /* CNT_IMASK bitmasks */
  69 #define ICIE            (1 << 0)        /* Illegal Gray/Binary Code Interrupt Enable */
  70 #define UCIE            (1 << 1)        /* Up count Interrupt Enable */
  71 #define DCIE            (1 << 2)        /* Down count Interrupt Enable */
  72 #define MINCIE          (1 << 3)        /* Min Count Interrupt Enable */
  73 #define MAXCIE          (1 << 4)        /* Max Count Interrupt Enable */
  74 #define COV31IE         (1 << 5)        /* Bit 31 Overflow Interrupt Enable */
  75 #define COV15IE         (1 << 6)        /* Bit 15 Overflow Interrupt Enable */
  76 #define CZEROIE         (1 << 7)        /* Count to Zero Interrupt Enable */
  77 #define CZMIE           (1 << 8)        /* CZM Pin Interrupt Enable */
  78 #define CZMEIE          (1 << 9)        /* CZM Error Interrupt Enable */
  79 #define CZMZIE          (1 << 10)       /* CZM Zeroes Counter Interrupt Enable */
  80
  81 /* CNT_STATUS bitmasks */
  82 #define ICII            (1 << 0)        /* Illegal Gray/Binary Code Interrupt Identifier */
  83 #define UCII            (1 << 1)        /* Up count Interrupt Identifier */
  84 #define DCII            (1 << 2)        /* Down count Interrupt Identifier */
  85 #define MINCII          (1 << 3)        /* Min Count Interrupt Identifier */
  86 #define MAXCII          (1 << 4)        /* Max Count Interrupt Identifier */
  87 #define COV31II         (1 << 5)        /* Bit 31 Overflow Interrupt Identifier */
  88 #define COV15II         (1 << 6)        /* Bit 15 Overflow Interrupt Identifier */
  89 #define CZEROII         (1 << 7)        /* Count to Zero Interrupt Identifier */
  90 #define CZMII           (1 << 8)        /* CZM Pin Interrupt Identifier */
  91 #define CZMEII          (1 << 9)        /* CZM Error Interrupt Identifier */
  92 #define CZMZII          (1 << 10)       /* CZM Zeroes Counter Interrupt Identifier */
  93
  94 /* CNT_COMMAND bitmasks */
  95 #define W1LCNT          0xf             /* Load Counter Register */
  96 #define W1LMIN          0xf0            /* Load Min Register */
  97 #define W1LMAX          0xf00           /* Load Max Register */
  98 #define W1ZMONCE        (1 << 12)       /* Enable CZM Clear Counter Once */
  99
 100 #define W1LCNT_ZERO     (1 << 0)        /* write 1 to load CNT_COUNTER with zero */
 101 #define W1LCNT_MIN      (1 << 2)        /* write 1 to load CNT_COUNTER from CNT_MIN */
 102 #define W1LCNT_MAX      (1 << 3)        /* write 1 to load CNT_COUNTER from CNT_MAX */
 103
 104 #define W1LMIN_ZERO     (1 << 4)        /* write 1 to load CNT_MIN with zero */
 105 #define W1LMIN_CNT      (1 << 5)        /* write 1 to load CNT_MIN from CNT_COUNTER */
 106 #define W1LMIN_MAX      (1 << 7)        /* write 1 to load CNT_MIN from CNT_MAX */
 107
 108 #define W1LMAX_ZERO     (1 << 8)        /* write 1 to load CNT_MAX with zero */
 109 #define W1LMAX_CNT      (1 << 9)        /* write 1 to load CNT_MAX from CNT_COUNTER */
 110 #define W1LMAX_MIN      (1 << 10)       /* write 1 to load CNT_MAX from CNT_MIN */
 111
 112 /* CNT_DEBOUNCE bitmasks */
 113 #define DPRESCALE       0xf             /* Load Counter Register */
 114
 115 #endif