release/src-rt-6.x/linux/linux-2.6/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h

   1 #include <linux/serial.h>
   2 #include <asm/dma.h>
   3
   4 #define NR_PORTS                2
   5
   6 #define OFFSET_THR              0x00    /* Transmit Holding register            */
   7 #define OFFSET_RBR              0x00    /* Receive Buffer register              */
   8 #define OFFSET_DLL              0x00    /* Divisor Latch (Low-Byte)             */
   9 #define OFFSET_IER              0x04    /* Interrupt Enable Register            */
  10 #define OFFSET_DLH              0x04    /* Divisor Latch (High-Byte)            */
  11 #define OFFSET_IIR              0x08    /* Interrupt Identification Register    */
  12 #define OFFSET_LCR              0x0C    /* Line Control Register                */
  13 #define OFFSET_MCR              0x10    /* Modem Control Register               */
  14 #define OFFSET_LSR              0x14    /* Line Status Register                 */
  15 #define OFFSET_MSR              0x18    /* Modem Status Register                */
  16 #define OFFSET_SCR              0x1C    /* SCR Scratch Register                 */
  17 #define OFFSET_GCTL             0x24    /* Global Control Register              */
  18
  19 #define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
  20 #define UART_GET_DLL(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLL))
  21 #define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
  22 #define UART_GET_DLH(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLH))
  23 #define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
  24 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
  25 #define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
  26 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
  27
  28 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
  29 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
  30 #define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
  31 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
  32 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
  33 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
  34
  35 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
  36 # define CONFIG_SERIAL_BFIN_CTSRTS
  37
  38 # ifndef CONFIG_UART0_CTS_PIN
  39 #  define CONFIG_UART0_CTS_PIN -1
  40 # endif
  41
  42 # ifndef CONFIG_UART0_RTS_PIN
  43 #  define CONFIG_UART0_RTS_PIN -1
  44 # endif
  45
  46 # ifndef CONFIG_UART1_CTS_PIN
  47 #  define CONFIG_UART1_CTS_PIN -1
  48 # endif
  49
  50 # ifndef CONFIG_UART1_RTS_PIN
  51 #  define CONFIG_UART1_RTS_PIN -1
  52 # endif
  53 #endif
  54 /*
  55  * The pin configuration is different from schematic
  56  */
  57 struct bfin_serial_port {
  58         struct uart_port        port;
  59         unsigned int            old_status;
  60 #ifdef CONFIG_SERIAL_BFIN_DMA
  61         int                     tx_done;
  62         int                     tx_count;
  63         struct circ_buf         rx_dma_buf;
  64         struct timer_list       rx_dma_timer;
  65         int                     rx_dma_nrows;
  66         unsigned int            tx_dma_channel;
  67         unsigned int            rx_dma_channel;
  68         struct work_struct      tx_dma_workqueue;
  69 #else
  70         struct work_struct      cts_workqueue;
  71 #endif
  72 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
  73         int             cts_pin;
  74         int             rts_pin;
  75 #endif
  76 };
  77
  78 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
  79 struct bfin_serial_res {
  80         unsigned long   uart_base_addr;
  81         int             uart_irq;
  82 #ifdef CONFIG_SERIAL_BFIN_DMA
  83         unsigned int    uart_tx_dma_channel;
  84         unsigned int    uart_rx_dma_channel;
  85 #endif
  86 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
  87         int     uart_cts_pin;
  88         int     uart_rts_pin;
  89 #endif
  90 };
  91
  92 struct bfin_serial_res bfin_serial_resource[] = {
  93 #ifdef CONFIG_SERIAL_BFIN_UART0
  94         {
  95         0xFFC00400,
  96         IRQ_UART0_RX,
  97 #ifdef CONFIG_SERIAL_BFIN_DMA
  98         CH_UART0_TX,
  99         CH_UART0_RX,
 100 #endif
 101 #ifdef CONFIG_BFIN_UART0_CTSRTS
 102         CONFIG_UART0_CTS_PIN,
 103         CONFIG_UART0_RTS_PIN,
 104 #endif
 105         },
 106 #endif
 107 #ifdef CONFIG_SERIAL_BFIN_UART1
 108         {
 109         0xFFC02000,
 110         IRQ_UART1_RX,
 111 #ifdef CONFIG_SERIAL_BFIN_DMA
 112         CH_UART1_TX,
 113         CH_UART1_RX,
 114 #endif
 115 #ifdef CONFIG_BFIN_UART1_CTSRTS
 116         CONFIG_UART1_CTS_PIN,
 117         CONFIG_UART1_RTS_PIN,
 118 #endif
 119         },
 120 #endif
 121 };
 122
 123 int nr_ports = ARRAY_SIZE(bfin_serial_resource);
 124
 125 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 126 {
 127         unsigned short val;
 128         val = bfin_read16(BFIN_PORT_MUX);
 129         val &= ~(PFDE | PFTE);
 130         bfin_write16(BFIN_PORT_MUX, val);
 131
 132         val = bfin_read16(PORTF_FER);
 133         val |= 0xF;
 134         bfin_write16(PORTF_FER, val);
 135
 136 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 137         if (uart->cts_pin >= 0) {
 138                 gpio_request(uart->cts_pin, NULL);
 139                 gpio_direction_input(uart->cts_pin);
 140         }
 141
 142         if (uart->rts_pin >= 0) {
 143                 gpio_request(uart->rts_pin, NULL);
 144                 gpio_direction_output(uart->rts_pin);
 145         }
 146 #endif
 147 }