release/src-rt-6.x/linux/linux-2.6/drivers/serial/8250_au1x00.c

   1 /*
   2  * Serial Device Initialisation for Au1x00
   3  *
   4  * (C) Copyright Embedded Alley Solutions, Inc 2005
   5  * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  */
  12
  13 #include <linux/errno.h>
  14 #include <linux/init.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/ioport.h>
  17 #include <linux/module.h>
  18 #include <linux/serial_core.h>
  19 #include <linux/signal.h>
  20 #include <linux/slab.h>
  21 #include <linux/types.h>
  22
  23 #include <linux/serial_8250.h>
  24
  25 #include <asm/mach-au1x00/au1000.h>
  26
  27 #include "8250.h"
  28
  29 #define PORT(_base, _irq)                               \
  30         {                                               \
  31                 .iobase         = _base,                \
  32                 .membase        = (void __iomem *)_base,\
  33                 .mapbase        = CPHYSADDR(_base),     \
  34                 .irq            = _irq,                 \
  35                 .uartclk        = 0,    /* filled */    \
  36                 .regshift       = 2,                    \
  37                 .iotype         = UPIO_AU,              \
  38                 .flags          = UPF_SKIP_TEST         \
  39         }
  40
  41 static struct plat_serial8250_port au1x00_data[] = {
  42 #if defined(CONFIG_SOC_AU1000)
  43         PORT(UART0_ADDR, AU1000_UART0_INT),
  44         PORT(UART1_ADDR, AU1000_UART1_INT),
  45         PORT(UART2_ADDR, AU1000_UART2_INT),
  46         PORT(UART3_ADDR, AU1000_UART3_INT),
  47 #elif defined(CONFIG_SOC_AU1500)
  48         PORT(UART0_ADDR, AU1500_UART0_INT),
  49         PORT(UART3_ADDR, AU1500_UART3_INT),
  50 #elif defined(CONFIG_SOC_AU1100)
  51         PORT(UART0_ADDR, AU1100_UART0_INT),
  52         PORT(UART1_ADDR, AU1100_UART1_INT),
  53         /* The internal UART2 does not exist on the AU1100 processor. */
  54         PORT(UART3_ADDR, AU1100_UART3_INT),
  55 #elif defined(CONFIG_SOC_AU1550)
  56         PORT(UART0_ADDR, AU1550_UART0_INT),
  57         PORT(UART1_ADDR, AU1550_UART1_INT),
  58         PORT(UART3_ADDR, AU1550_UART3_INT),
  59 #elif defined(CONFIG_SOC_AU1200)
  60         PORT(UART0_ADDR, AU1200_UART0_INT),
  61         PORT(UART1_ADDR, AU1200_UART1_INT),
  62 #endif
  63         { },
  64 };
  65
  66 static struct platform_device au1x00_device = {
  67         .name                   = "serial8250",
  68         .id                     = PLAT8250_DEV_AU1X00,
  69         .dev                    = {
  70                 .platform_data  = au1x00_data,
  71         },
  72 };
  73
  74 static int __init au1x00_init(void)
  75 {
  76         int i;
  77         unsigned int uartclk;
  78
  79         /* get uart clock */
  80         uartclk = get_au1x00_uart_baud_base() * 16;
  81
  82         /* fill up uartclk */
  83         for (i = 0; au1x00_data[i].flags ; i++)
  84                 au1x00_data[i].uartclk = uartclk;
  85
  86         return platform_device_register(&au1x00_device);
  87 }
  88
  89 /* XXX: Yes, I know this doesn't yet work. */
  90 static void __exit au1x00_exit(void)
  91 {
  92         platform_device_unregister(&au1x00_device);
  93 }
  94
  95 module_init(au1x00_init);
  96 module_exit(au1x00_exit);
  97
  98 MODULE_AUTHOR("Pantelis Antoniou <pantelis@embeddedalley.com>");
  99 MODULE_DESCRIPTION("8250 serial probe module for Au1x000 cards");
 100 MODULE_LICENSE("GPL");