release/src-rt-6.x/linux/linux-2.6/drivers/net/sk98lin/Makefile

   1 #
   2 # Makefile for the SysKonnect SK-98xx device driver.
   3 #
   4
   5
   6 #
   7 # Standalone driver params
   8 # SKPARAM += -DSK_KERNEL_24
   9 # SKPARAM += -DSK_KERNEL_24_26
  10 # SKPARAM += -DSK_KERNEL_26
  11 # SKPARAM += -DSK_KERNEL_22_24
  12
  13 obj-$(CONFIG_SK98LIN) += sk98lin.o
  14 sk98lin-objs    :=      \
  15                 skge.o          \
  16                 skethtool.o     \
  17                 skdim.o         \
  18                 skaddr.o        \
  19                 skgehwt.o       \
  20                 skgeinit.o      \
  21                 skgepnmi.o      \
  22                 skgesirq.o      \
  23                 ski2c.o         \
  24                 sklm80.o        \
  25                 skqueue.o       \
  26                 skrlmt.o        \
  27                 sktimer.o       \
  28                 skvpd.o         \
  29                 skxmac2.o
  30
  31 # DBGDEF =  \
  32 # -DDEBUG
  33
  34 ifdef DEBUG
  35 DBGDEF +=  \
  36 -DSK_DEBUG_CHKMOD=0x00000000L \
  37 -DSK_DEBUG_CHKCAT=0x00000000L
  38 endif
  39
  40
  41 # **** possible debug modules for SK_DEBUG_CHKMOD *****************
  42 # SK_DBGMOD_MERR        0x00000001L     /* general module error indication */
  43 # SK_DBGMOD_HWM         0x00000002L     /* Hardware init module */
  44 # SK_DBGMOD_RLMT        0x00000004L     /* RLMT module */
  45 # SK_DBGMOD_VPD         0x00000008L     /* VPD module */
  46 # SK_DBGMOD_I2C         0x00000010L     /* I2C module */
  47 # SK_DBGMOD_PNMI        0x00000020L     /* PNMI module */
  48 # SK_DBGMOD_CSUM        0x00000040L     /* CSUM module */
  49 # SK_DBGMOD_ADDR        0x00000080L     /* ADDR module */
  50 # SK_DBGMOD_DRV         0x00010000L     /* DRV module */
  51
  52 # **** possible debug categories for SK_DEBUG_CHKCAT **************
  53 # *** common modules ***
  54 # SK_DBGCAT_INIT        0x00000001L     module/driver initialization
  55 # SK_DBGCAT_CTRL        0x00000002L     controlling: add/rmv MCA/MAC and other controls (IOCTL)
  56 # SK_DBGCAT_ERR         0x00000004L     error handling paths
  57 # SK_DBGCAT_TX          0x00000008L     transmit path
  58 # SK_DBGCAT_RX          0x00000010L     receive path
  59 # SK_DBGCAT_IRQ         0x00000020L     general IRQ handling
  60 # SK_DBGCAT_QUEUE       0x00000040L     any queue management
  61 # SK_DBGCAT_DUMP        0x00000080L     large data output e.g. hex dump
  62 # SK_DBGCAT_FATAL       0x00000100L     large data output e.g. hex dump
  63
  64 # *** driver (file skge.c) ***
  65 # SK_DBGCAT_DRV_ENTRY           0x00010000      entry points
  66 # SK_DBGCAT_DRV_???             0x00020000      not used
  67 # SK_DBGCAT_DRV_MCA             0x00040000      multicast
  68 # SK_DBGCAT_DRV_TX_PROGRESS     0x00080000      tx path
  69 # SK_DBGCAT_DRV_RX_PROGRESS     0x00100000      rx path
  70 # SK_DBGCAT_DRV_PROGRESS        0x00200000      general runtime
  71 # SK_DBGCAT_DRV_???             0x00400000      not used
  72 # SK_DBGCAT_DRV_PROM            0x00800000      promiscuous mode
  73 # SK_DBGCAT_DRV_TX_FRAME        0x01000000      display tx frames
  74 # SK_DBGCAT_DRV_ERROR           0x02000000      error conditions
  75 # SK_DBGCAT_DRV_INT_SRC         0x04000000      interrupts sources
  76 # SK_DBGCAT_DRV_EVENT           0x08000000      driver events
  77
  78 EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
  79
  80 clean:
  81         rm -f core *.o *.a *.s
  82
  83
  84
  85
  86
  87