release/src-rt-6.x/linux/linux-2.6/drivers/net/b44.h

   1 #ifndef _B44_H
   2 #define _B44_H
   3
   4 /* Register layout. (These correspond to struct _bcmenettregs in bcm4400.) */
   5 #define B44_DEVCTRL     0x0000UL /* Device Control */
   6 #define  DEVCTRL_MPM            0x00000040 /* Magic Packet PME Enable (B0 only) */
   7 #define  DEVCTRL_PFE            0x00000080 /* Pattern Filtering Enable */
   8 #define  DEVCTRL_IPP            0x00000400 /* Internal EPHY Present */
   9 #define  DEVCTRL_EPR            0x00008000 /* EPHY Reset */
  10 #define  DEVCTRL_PME            0x00001000 /* PHY Mode Enable */
  11 #define  DEVCTRL_PMCE           0x00002000 /* PHY Mode Clocks Enable */
  12 #define  DEVCTRL_PADDR          0x0007c000 /* PHY Address */
  13 #define  DEVCTRL_PADDR_SHIFT    18
  14 #define B44_BIST_STAT   0x000CUL /* Built-In Self-Test Status */
  15 #define B44_WKUP_LEN    0x0010UL /* Wakeup Length */
  16 #define  WKUP_LEN_P0_MASK       0x0000007f /* Pattern 0 */
  17 #define  WKUP_LEN_D0            0x00000080
  18 #define  WKUP_LEN_P1_MASK       0x00007f00 /* Pattern 1 */
  19 #define  WKUP_LEN_P1_SHIFT      8
  20 #define  WKUP_LEN_D1            0x00008000
  21 #define  WKUP_LEN_P2_MASK       0x007f0000 /* Pattern 2 */
  22 #define  WKUP_LEN_P2_SHIFT      16
  23 #define  WKUP_LEN_D2            0x00000000
  24 #define  WKUP_LEN_P3_MASK       0x7f000000 /* Pattern 3 */
  25 #define  WKUP_LEN_P3_SHIFT      24
  26 #define  WKUP_LEN_D3            0x80000000
  27 #define  WKUP_LEN_DISABLE       0x80808080
  28 #define  WKUP_LEN_ENABLE_TWO    0x80800000
  29 #define  WKUP_LEN_ENABLE_THREE  0x80000000
  30 #define B44_ISTAT       0x0020UL /* Interrupt Status */
  31 #define  ISTAT_LS               0x00000020 /* Link Change (B0 only) */
  32 #define  ISTAT_PME              0x00000040 /* Power Management Event */
  33 #define  ISTAT_TO               0x00000080 /* General Purpose Timeout */
  34 #define  ISTAT_DSCE             0x00000400 /* Descriptor Error */
  35 #define  ISTAT_DATAE            0x00000800 /* Data Error */
  36 #define  ISTAT_DPE              0x00001000 /* Descr. Protocol Error */
  37 #define  ISTAT_RDU              0x00002000 /* Receive Descr. Underflow */
  38 #define  ISTAT_RFO              0x00004000 /* Receive FIFO Overflow */
  39 #define  ISTAT_TFU              0x00008000 /* Transmit FIFO Underflow */
  40 #define  ISTAT_RX               0x00010000 /* RX Interrupt */
  41 #define  ISTAT_TX               0x01000000 /* TX Interrupt */
  42 #define  ISTAT_EMAC             0x04000000 /* EMAC Interrupt */
  43 #define  ISTAT_MII_WRITE        0x08000000 /* MII Write Interrupt */
  44 #define  ISTAT_MII_READ         0x10000000 /* MII Read Interrupt */
  45 #define  ISTAT_ERRORS (ISTAT_DSCE|ISTAT_DATAE|ISTAT_DPE|ISTAT_RDU|ISTAT_RFO|ISTAT_TFU)
  46 #define B44_IMASK       0x0024UL /* Interrupt Mask */
  47 #define  IMASK_DEF              (ISTAT_ERRORS | ISTAT_TO | ISTAT_RX | ISTAT_TX)
  48 #define B44_GPTIMER     0x0028UL /* General Purpose Timer */
  49 #define B44_ADDR_LO     0x0088UL /* ENET Address Lo (B0 only) */
  50 #define B44_ADDR_HI     0x008CUL /* ENET Address Hi (B0 only) */
  51 #define B44_FILT_ADDR   0x0090UL /* ENET Filter Address */
  52 #define B44_FILT_DATA   0x0094UL /* ENET Filter Data */
  53 #define B44_TXBURST     0x00A0UL /* TX Max Burst Length */
  54 #define B44_RXBURST     0x00A4UL /* RX Max Burst Length */
  55 #define B44_MAC_CTRL    0x00A8UL /* MAC Control */
  56 #define  MAC_CTRL_CRC32_ENAB    0x00000001 /* CRC32 Generation Enable */
  57 #define  MAC_CTRL_PHY_PDOWN     0x00000004 /* Onchip EPHY Powerdown */
  58 #define  MAC_CTRL_PHY_EDET      0x00000008 /* Onchip EPHY Energy Detected */
  59 #define  MAC_CTRL_PHY_LEDCTRL   0x000000e0 /* Onchip EPHY LED Control */
  60 #define  MAC_CTRL_PHY_LEDCTRL_SHIFT 5
  61 #define B44_MAC_FLOW    0x00ACUL /* MAC Flow Control */
  62 #define  MAC_FLOW_RX_HI_WATER   0x000000ff /* Receive FIFO HI Water Mark */
  63 #define  MAC_FLOW_PAUSE_ENAB    0x00008000 /* Enable Pause Frame Generation */
  64 #define B44_RCV_LAZY    0x0100UL /* Lazy Interrupt Control */
  65 #define  RCV_LAZY_TO_MASK       0x00ffffff /* Timeout */
  66 #define  RCV_LAZY_FC_MASK       0xff000000 /* Frame Count */
  67 #define  RCV_LAZY_FC_SHIFT      24
  68 #define B44_DMATX_CTRL  0x0200UL /* DMA TX Control */
  69 #define  DMATX_CTRL_ENABLE      0x00000001 /* Enable */
  70 #define  DMATX_CTRL_SUSPEND     0x00000002 /* Suepend Request */
  71 #define  DMATX_CTRL_LPBACK      0x00000004 /* Loopback Enable */
  72 #define  DMATX_CTRL_FAIRPRIOR   0x00000008 /* Fair Priority */
  73 #define  DMATX_CTRL_FLUSH       0x00000010 /* Flush Request */
  74 #define B44_DMATX_ADDR  0x0204UL /* DMA TX Descriptor Ring Address */
  75 #define B44_DMATX_PTR   0x0208UL /* DMA TX Last Posted Descriptor */
  76 #define B44_DMATX_STAT  0x020CUL /* DMA TX Current Active Desc. + Status */
  77 #define  DMATX_STAT_CDMASK      0x00000fff /* Current Descriptor Mask */
  78 #define  DMATX_STAT_SMASK       0x0000f000 /* State Mask */
  79 #define  DMATX_STAT_SDISABLED   0x00000000 /* State Disabled */
  80 #define  DMATX_STAT_SACTIVE     0x00001000 /* State Active */
  81 #define  DMATX_STAT_SIDLE       0x00002000 /* State Idle Wait */
  82 #define  DMATX_STAT_SSTOPPED    0x00003000 /* State Stopped */
  83 #define  DMATX_STAT_SSUSP       0x00004000 /* State Suspend Pending */
  84 #define  DMATX_STAT_EMASK       0x000f0000 /* Error Mask */
  85 #define  DMATX_STAT_ENONE       0x00000000 /* Error None */
  86 #define  DMATX_STAT_EDPE        0x00010000 /* Error Desc. Protocol Error */
  87 #define  DMATX_STAT_EDFU        0x00020000 /* Error Data FIFO Underrun */
  88 #define  DMATX_STAT_EBEBR       0x00030000 /* Error Bus Error on Buffer Read */
  89 #define  DMATX_STAT_EBEDA       0x00040000 /* Error Bus Error on Desc. Access */
  90 #define  DMATX_STAT_FLUSHED     0x00100000 /* Flushed */
  91 #define B44_DMARX_CTRL  0x0210UL /* DMA RX Control */
  92 #define  DMARX_CTRL_ENABLE      0x00000001 /* Enable */
  93 #define  DMARX_CTRL_ROMASK      0x000000fe /* Receive Offset Mask */
  94 #define  DMARX_CTRL_ROSHIFT     1          /* Receive Offset Shift */
  95 #define B44_DMARX_ADDR  0x0214UL /* DMA RX Descriptor Ring Address */
  96 #define B44_DMARX_PTR   0x0218UL /* DMA RX Last Posted Descriptor */
  97 #define B44_DMARX_STAT  0x021CUL /* DMA RX Current Active Desc. + Status */
  98 #define  DMARX_STAT_CDMASK      0x00000fff /* Current Descriptor Mask */
  99 #define  DMARX_STAT_SMASK       0x0000f000 /* State Mask */
 100 #define  DMARX_STAT_SDISABLED   0x00000000 /* State Disbaled */
 101 #define  DMARX_STAT_SACTIVE     0x00001000 /* State Active */
 102 #define  DMARX_STAT_SIDLE       0x00002000 /* State Idle Wait */
 103 #define  DMARX_STAT_SSTOPPED    0x00003000 /* State Stopped */
 104 #define  DMARX_STAT_EMASK       0x000f0000 /* Error Mask */
 105 #define  DMARX_STAT_ENONE       0x00000000 /* Error None */
 106 #define  DMARX_STAT_EDPE        0x00010000 /* Error Desc. Protocol Error */
 107 #define  DMARX_STAT_EDFO        0x00020000 /* Error Data FIFO Overflow */
 108 #define  DMARX_STAT_EBEBW       0x00030000 /* Error Bus Error on Buffer Write */
 109 #define  DMARX_STAT_EBEDA       0x00040000 /* Error Bus Error on Desc. Access */
 110 #define B44_DMAFIFO_AD  0x0220UL /* DMA FIFO Diag Address */
 111 #define  DMAFIFO_AD_OMASK       0x0000ffff /* Offset Mask */
 112 #define  DMAFIFO_AD_SMASK       0x000f0000 /* Select Mask */
 113 #define  DMAFIFO_AD_SXDD        0x00000000 /* Select Transmit DMA Data */
 114 #define  DMAFIFO_AD_SXDP        0x00010000 /* Select Transmit DMA Pointers */
 115 #define  DMAFIFO_AD_SRDD        0x00040000 /* Select Receive DMA Data */
 116 #define  DMAFIFO_AD_SRDP        0x00050000 /* Select Receive DMA Pointers */
 117 #define  DMAFIFO_AD_SXFD        0x00080000 /* Select Transmit FIFO Data */
 118 #define  DMAFIFO_AD_SXFP        0x00090000 /* Select Transmit FIFO Pointers */
 119 #define  DMAFIFO_AD_SRFD        0x000c0000 /* Select Receive FIFO Data */
 120 #define  DMAFIFO_AD_SRFP        0x000c0000 /* Select Receive FIFO Pointers */
 121 #define B44_DMAFIFO_LO  0x0224UL /* DMA FIFO Diag Low Data */
 122 #define B44_DMAFIFO_HI  0x0228UL /* DMA FIFO Diag High Data */
 123 #define B44_RXCONFIG    0x0400UL /* EMAC RX Config */
 124 #define  RXCONFIG_DBCAST        0x00000001 /* Disable Broadcast */
 125 #define  RXCONFIG_ALLMULTI      0x00000002 /* Accept All Multicast */
 126 #define  RXCONFIG_NORX_WHILE_TX 0x00000004 /* Receive Disable While Transmitting */
 127 #define  RXCONFIG_PROMISC       0x00000008 /* Promiscuous Enable */
 128 #define  RXCONFIG_LPBACK        0x00000010 /* Loopback Enable */
 129 #define  RXCONFIG_FLOW          0x00000020 /* Flow Control Enable */
 130 #define  RXCONFIG_FLOW_ACCEPT   0x00000040 /* Accept Unicast Flow Control Frame */
 131 #define  RXCONFIG_RFILT         0x00000080 /* Reject Filter */
 132 #define B44_RXMAXLEN    0x0404UL /* EMAC RX Max Packet Length */
 133 #define B44_TXMAXLEN    0x0408UL /* EMAC TX Max Packet Length */
 134 #define B44_MDIO_CTRL   0x0410UL /* EMAC MDIO Control */
 135 #define  MDIO_CTRL_MAXF_MASK    0x0000007f /* MDC Frequency */
 136 #define  MDIO_CTRL_PREAMBLE     0x00000080 /* MII Preamble Enable */
 137 #define B44_MDIO_DATA   0x0414UL /* EMAC MDIO Data */
 138 #define  MDIO_DATA_DATA         0x0000ffff /* R/W Data */
 139 #define  MDIO_DATA_TA_MASK      0x00030000 /* Turnaround Value */
 140 #define  MDIO_DATA_TA_SHIFT     16
 141 #define  MDIO_TA_VALID          2
 142 #define  MDIO_DATA_RA_MASK      0x007c0000 /* Register Address */
 143 #define  MDIO_DATA_RA_SHIFT     18
 144 #define  MDIO_DATA_PMD_MASK     0x0f800000 /* Physical Media Device */
 145 #define  MDIO_DATA_PMD_SHIFT    23
 146 #define  MDIO_DATA_OP_MASK      0x30000000 /* Opcode */
 147 #define  MDIO_DATA_OP_SHIFT     28
 148 #define  MDIO_OP_WRITE          1
 149 #define  MDIO_OP_READ           2
 150 #define  MDIO_DATA_SB_MASK      0xc0000000 /* Start Bits */
 151 #define  MDIO_DATA_SB_SHIFT     30
 152 #define  MDIO_DATA_SB_START     0x40000000 /* Start Of Frame */
 153 #define B44_EMAC_IMASK  0x0418UL /* EMAC Interrupt Mask */
 154 #define B44_EMAC_ISTAT  0x041CUL /* EMAC Interrupt Status */
 155 #define  EMAC_INT_MII           0x00000001 /* MII MDIO Interrupt */
 156 #define  EMAC_INT_MIB           0x00000002 /* MIB Interrupt */
 157 #define  EMAC_INT_FLOW          0x00000003 /* Flow Control Interrupt */
 158 #define B44_CAM_DATA_LO 0x0420UL /* EMAC CAM Data Low */
 159 #define B44_CAM_DATA_HI 0x0424UL /* EMAC CAM Data High */
 160 #define  CAM_DATA_HI_VALID      0x00010000 /* Valid Bit */
 161 #define B44_CAM_CTRL    0x0428UL /* EMAC CAM Control */
 162 #define  CAM_CTRL_ENABLE        0x00000001 /* CAM Enable */
 163 #define  CAM_CTRL_MSEL          0x00000002 /* Mask Select */
 164 #define  CAM_CTRL_READ          0x00000004 /* Read */
 165 #define  CAM_CTRL_WRITE         0x00000008 /* Read */
 166 #define  CAM_CTRL_INDEX_MASK    0x003f0000 /* Index Mask */
 167 #define  CAM_CTRL_INDEX_SHIFT   16
 168 #define  CAM_CTRL_BUSY          0x80000000 /* CAM Busy */
 169 #define B44_ENET_CTRL   0x042CUL /* EMAC ENET Control */
 170 #define  ENET_CTRL_ENABLE       0x00000001 /* EMAC Enable */
 171 #define  ENET_CTRL_DISABLE      0x00000002 /* EMAC Disable */
 172 #define  ENET_CTRL_SRST         0x00000004 /* EMAC Soft Reset */
 173 #define  ENET_CTRL_EPSEL        0x00000008 /* External PHY Select */
 174 #define B44_TX_CTRL     0x0430UL /* EMAC TX Control */
 175 #define  TX_CTRL_DUPLEX         0x00000001 /* Full Duplex */
 176 #define  TX_CTRL_FMODE          0x00000002 /* Flow Mode */
 177 #define  TX_CTRL_SBENAB         0x00000004 /* Single Backoff Enable */
 178 #define  TX_CTRL_SMALL_SLOT     0x00000008 /* Small Slottime */
 179 #define B44_TX_WMARK    0x0434UL /* EMAC TX Watermark */
 180 #define B44_MIB_CTRL    0x0438UL /* EMAC MIB Control */
 181 #define  MIB_CTRL_CLR_ON_READ   0x00000001 /* Autoclear on Read */
 182 #define B44_TX_GOOD_O   0x0500UL /* MIB TX Good Octets */
 183 #define B44_TX_GOOD_P   0x0504UL /* MIB TX Good Packets */
 184 #define B44_TX_O        0x0508UL /* MIB TX Octets */
 185 #define B44_TX_P        0x050CUL /* MIB TX Packets */
 186 #define B44_TX_BCAST    0x0510UL /* MIB TX Broadcast Packets */
 187 #define B44_TX_MCAST    0x0514UL /* MIB TX Multicast Packets */
 188 #define B44_TX_64       0x0518UL /* MIB TX <= 64 byte Packets */
 189 #define B44_TX_65_127   0x051CUL /* MIB TX 65 to 127 byte Packets */
 190 #define B44_TX_128_255  0x0520UL /* MIB TX 128 to 255 byte Packets */
 191 #define B44_TX_256_511  0x0524UL /* MIB TX 256 to 511 byte Packets */
 192 #define B44_TX_512_1023 0x0528UL /* MIB TX 512 to 1023 byte Packets */
 193 #define B44_TX_1024_MAX 0x052CUL /* MIB TX 1024 to max byte Packets */
 194 #define B44_TX_JABBER   0x0530UL /* MIB TX Jabber Packets */
 195 #define B44_TX_OSIZE    0x0534UL /* MIB TX Oversize Packets */
 196 #define B44_TX_FRAG     0x0538UL /* MIB TX Fragment Packets */
 197 #define B44_TX_URUNS    0x053CUL /* MIB TX Underruns */
 198 #define B44_TX_TCOLS    0x0540UL /* MIB TX Total Collisions */
 199 #define B44_TX_SCOLS    0x0544UL /* MIB TX Single Collisions */
 200 #define B44_TX_MCOLS    0x0548UL /* MIB TX Multiple Collisions */
 201 #define B44_TX_ECOLS    0x054CUL /* MIB TX Excessive Collisions */
 202 #define B44_TX_LCOLS    0x0550UL /* MIB TX Late Collisions */
 203 #define B44_TX_DEFERED  0x0554UL /* MIB TX Defered Packets */
 204 #define B44_TX_CLOST    0x0558UL /* MIB TX Carrier Lost */
 205 #define B44_TX_PAUSE    0x055CUL /* MIB TX Pause Packets */
 206 #define B44_RX_GOOD_O   0x0580UL /* MIB RX Good Octets */
 207 #define B44_RX_GOOD_P   0x0584UL /* MIB RX Good Packets */
 208 #define B44_RX_O        0x0588UL /* MIB RX Octets */
 209 #define B44_RX_P        0x058CUL /* MIB RX Packets */
 210 #define B44_RX_BCAST    0x0590UL /* MIB RX Broadcast Packets */
 211 #define B44_RX_MCAST    0x0594UL /* MIB RX Multicast Packets */
 212 #define B44_RX_64       0x0598UL /* MIB RX <= 64 byte Packets */
 213 #define B44_RX_65_127   0x059CUL /* MIB RX 65 to 127 byte Packets */
 214 #define B44_RX_128_255  0x05A0UL /* MIB RX 128 to 255 byte Packets */
 215 #define B44_RX_256_511  0x05A4UL /* MIB RX 256 to 511 byte Packets */
 216 #define B44_RX_512_1023 0x05A8UL /* MIB RX 512 to 1023 byte Packets */
 217 #define B44_RX_1024_MAX 0x05ACUL /* MIB RX 1024 to max byte Packets */
 218 #define B44_RX_JABBER   0x05B0UL /* MIB RX Jabber Packets */
 219 #define B44_RX_OSIZE    0x05B4UL /* MIB RX Oversize Packets */
 220 #define B44_RX_FRAG     0x05B8UL /* MIB RX Fragment Packets */
 221 #define B44_RX_MISS     0x05BCUL /* MIB RX Missed Packets */
 222 #define B44_RX_CRCA     0x05C0UL /* MIB RX CRC Align Errors */
 223 #define B44_RX_USIZE    0x05C4UL /* MIB RX Undersize Packets */
 224 #define B44_RX_CRC      0x05C8UL /* MIB RX CRC Errors */
 225 #define B44_RX_ALIGN    0x05CCUL /* MIB RX Align Errors */
 226 #define B44_RX_SYM      0x05D0UL /* MIB RX Symbol Errors */
 227 #define B44_RX_PAUSE    0x05D4UL /* MIB RX Pause Packets */
 228 #define B44_RX_NPAUSE   0x05D8UL /* MIB RX Non-Pause Packets */
 229
 230 /* Silicon backplane register definitions */
 231 #define B44_SBIMSTATE   0x0F90UL /* SB Initiator Agent State */
 232 #define  SBIMSTATE_PC           0x0000000f /* Pipe Count */
 233 #define  SBIMSTATE_AP_MASK      0x00000030 /* Arbitration Priority */
 234 #define  SBIMSTATE_AP_BOTH      0x00000000 /* Use both timeslices and token */
 235 #define  SBIMSTATE_AP_TS        0x00000010 /* Use timeslices only */
 236 #define  SBIMSTATE_AP_TK        0x00000020 /* Use token only */
 237 #define  SBIMSTATE_AP_RSV       0x00000030 /* Reserved */
 238 #define  SBIMSTATE_IBE          0x00020000 /* In Band Error */
 239 #define  SBIMSTATE_TO           0x00040000 /* Timeout */
 240 #define B44_SBINTVEC    0x0F94UL /* SB Interrupt Mask */
 241 #define  SBINTVEC_PCI           0x00000001 /* Enable interrupts for PCI */
 242 #define  SBINTVEC_ENET0         0x00000002 /* Enable interrupts for enet 0 */
 243 #define  SBINTVEC_ILINE20       0x00000004 /* Enable interrupts for iline20 */
 244 #define  SBINTVEC_CODEC         0x00000008 /* Enable interrupts for v90 codec */
 245 #define  SBINTVEC_USB           0x00000010 /* Enable interrupts for usb */
 246 #define  SBINTVEC_EXTIF         0x00000020 /* Enable interrupts for external i/f */
 247 #define  SBINTVEC_ENET1         0x00000040 /* Enable interrupts for enet 1 */
 248 #define B44_SBTMSLOW    0x0F98UL /* SB Target State Low */
 249 #define  SBTMSLOW_RESET         0x00000001 /* Reset */
 250 #define  SBTMSLOW_REJECT        0x00000002 /* Reject */
 251 #define  SBTMSLOW_CLOCK         0x00010000 /* Clock Enable */
 252 #define  SBTMSLOW_FGC           0x00020000 /* Force Gated Clocks On */
 253 #define  SBTMSLOW_PE            0x40000000 /* Power Management Enable */
 254 #define  SBTMSLOW_BE            0x80000000 /* BIST Enable */
 255 #define B44_SBTMSHIGH   0x0F9CUL /* SB Target State High */
 256 #define  SBTMSHIGH_SERR         0x00000001 /* S-error */
 257 #define  SBTMSHIGH_INT          0x00000002 /* Interrupt */
 258 #define  SBTMSHIGH_BUSY         0x00000004 /* Busy */
 259 #define  SBTMSHIGH_GCR          0x20000000 /* Gated Clock Request */
 260 #define  SBTMSHIGH_BISTF        0x40000000 /* BIST Failed */
 261 #define  SBTMSHIGH_BISTD        0x80000000 /* BIST Done */
 262 #define B44_SBIDHIGH    0x0FFCUL /* SB Identification High */
 263 #define  SBIDHIGH_RC_MASK       0x0000000f /* Revision Code */
 264 #define  SBIDHIGH_CC_MASK       0x0000fff0 /* Core Code */
 265 #define  SBIDHIGH_CC_SHIFT      4
 266 #define  SBIDHIGH_VC_MASK       0xffff0000 /* Vendor Code */
 267 #define  SBIDHIGH_VC_SHIFT      16
 268
 269 /* SSB PCI config space registers.  */
 270 #define SSB_PMCSR               0x44
 271 #define  SSB_PE                 0x100
 272 #define SSB_BAR0_WIN            0x80
 273 #define SSB_BAR1_WIN            0x84
 274 #define SSB_SPROM_CONTROL       0x88
 275 #define SSB_BAR1_CONTROL        0x8c
 276
 277 /* SSB core and host control registers.  */
 278 #define SSB_CONTROL             0x0000UL
 279 #define SSB_ARBCONTROL          0x0010UL
 280 #define SSB_ISTAT               0x0020UL
 281 #define SSB_IMASK               0x0024UL
 282 #define SSB_MBOX                0x0028UL
 283 #define SSB_BCAST_ADDR          0x0050UL
 284 #define SSB_BCAST_DATA          0x0054UL
 285 #define SSB_PCI_TRANS_0         0x0100UL
 286 #define SSB_PCI_TRANS_1         0x0104UL
 287 #define SSB_PCI_TRANS_2         0x0108UL
 288 #define SSB_SPROM               0x0800UL
 289
 290 #define SSB_PCI_MEM             0x00000000
 291 #define SSB_PCI_IO              0x00000001
 292 #define SSB_PCI_CFG0            0x00000002
 293 #define SSB_PCI_CFG1            0x00000003
 294 #define SSB_PCI_PREF            0x00000004
 295 #define SSB_PCI_BURST           0x00000008
 296 #define SSB_PCI_MASK0           0xfc000000
 297 #define SSB_PCI_MASK1           0xfc000000
 298 #define SSB_PCI_MASK2           0xc0000000
 299
 300 /* 4400 PHY registers */
 301 #define B44_MII_AUXCTRL         24      /* Auxiliary Control */
 302 #define  MII_AUXCTRL_DUPLEX     0x0001  /* Full Duplex */
 303 #define  MII_AUXCTRL_SPEED      0x0002  /* 1=100Mbps, 0=10Mbps */
 304 #define  MII_AUXCTRL_FORCED     0x0004  /* Forced 10/100 */
 305 #define B44_MII_ALEDCTRL        26      /* Activity LED */
 306 #define  MII_ALEDCTRL_ALLMSK    0x7fff
 307 #define B44_MII_TLEDCTRL        27      /* Traffic Meter LED */
 308 #define  MII_TLEDCTRL_ENABLE    0x0040
 309
 310 struct dma_desc {
 311         __le32  ctrl;
 312         __le32  addr;
 313 };
 314
 315 /* There are only 12 bits in the DMA engine for descriptor offsetting
 316  * so the table must be aligned on a boundary of this.
 317  */
 318 #define DMA_TABLE_BYTES         4096
 319
 320 #define DESC_CTRL_LEN   0x00001fff
 321 #define DESC_CTRL_CMASK 0x0ff00000 /* Core specific bits */
 322 #define DESC_CTRL_EOT   0x10000000 /* End of Table */
 323 #define DESC_CTRL_IOC   0x20000000 /* Interrupt On Completion */
 324 #define DESC_CTRL_EOF   0x40000000 /* End of Frame */
 325 #define DESC_CTRL_SOF   0x80000000 /* Start of Frame */
 326
 327 #define RX_COPY_THRESHOLD       256
 328
 329 struct rx_header {
 330         __le16  len;
 331         __le16  flags;
 332         __le16  pad[12];
 333 };
 334 #define RX_HEADER_LEN   28
 335
 336 #define RX_FLAG_OFIFO   0x00000001 /* FIFO Overflow */
 337 #define RX_FLAG_CRCERR  0x00000002 /* CRC Error */
 338 #define RX_FLAG_SERR    0x00000004 /* Receive Symbol Error */
 339 #define RX_FLAG_ODD     0x00000008 /* Frame has odd number of nibbles */
 340 #define RX_FLAG_LARGE   0x00000010 /* Frame is > RX MAX Length */
 341 #define RX_FLAG_MCAST   0x00000020 /* Dest is Multicast Address */
 342 #define RX_FLAG_BCAST   0x00000040 /* Dest is Broadcast Address */
 343 #define RX_FLAG_MISS    0x00000080 /* Received due to promisc mode */
 344 #define RX_FLAG_LAST    0x00000800 /* Last buffer in frame */
 345 #define RX_FLAG_ERRORS  (RX_FLAG_ODD | RX_FLAG_SERR | RX_FLAG_CRCERR | RX_FLAG_OFIFO)
 346
 347 struct ring_info {
 348         struct sk_buff          *skb;
 349         DECLARE_PCI_UNMAP_ADDR(mapping);
 350 };
 351
 352 #define B44_MCAST_TABLE_SIZE    32
 353
 354 #define B44_STAT_REG_DECLARE            \
 355         _B44(tx_good_octets)            \
 356         _B44(tx_good_pkts)              \
 357         _B44(tx_octets)                 \
 358         _B44(tx_pkts)                   \
 359         _B44(tx_broadcast_pkts)         \
 360         _B44(tx_multicast_pkts)         \
 361         _B44(tx_len_64)                 \
 362         _B44(tx_len_65_to_127)          \
 363         _B44(tx_len_128_to_255)         \
 364         _B44(tx_len_256_to_511)         \
 365         _B44(tx_len_512_to_1023)        \
 366         _B44(tx_len_1024_to_max)        \
 367         _B44(tx_jabber_pkts)            \
 368         _B44(tx_oversize_pkts)          \
 369         _B44(tx_fragment_pkts)          \
 370         _B44(tx_underruns)              \
 371         _B44(tx_total_cols)             \
 372         _B44(tx_single_cols)            \
 373         _B44(tx_multiple_cols)          \
 374         _B44(tx_excessive_cols)         \
 375         _B44(tx_late_cols)              \
 376         _B44(tx_defered)                \
 377         _B44(tx_carrier_lost)           \
 378         _B44(tx_pause_pkts)             \
 379         _B44(rx_good_octets)            \
 380         _B44(rx_good_pkts)              \
 381         _B44(rx_octets)                 \
 382         _B44(rx_pkts)                   \
 383         _B44(rx_broadcast_pkts)         \
 384         _B44(rx_multicast_pkts)         \
 385         _B44(rx_len_64)                 \
 386         _B44(rx_len_65_to_127)          \
 387         _B44(rx_len_128_to_255)         \
 388         _B44(rx_len_256_to_511)         \
 389         _B44(rx_len_512_to_1023)        \
 390         _B44(rx_len_1024_to_max)        \
 391         _B44(rx_jabber_pkts)            \
 392         _B44(rx_oversize_pkts)          \
 393         _B44(rx_fragment_pkts)          \
 394         _B44(rx_missed_pkts)            \
 395         _B44(rx_crc_align_errs)         \
 396         _B44(rx_undersize)              \
 397         _B44(rx_crc_errs)               \
 398         _B44(rx_align_errs)             \
 399         _B44(rx_symbol_errs)            \
 400         _B44(rx_pause_pkts)             \
 401         _B44(rx_nonpause_pkts)
 402
 403 /* SW copy of device statistics, kept up to date by periodic timer
 404  * which probes HW values. Check b44_stats_update if you mess with
 405  * the layout
 406  */
 407 struct b44_hw_stats {
 408 #define _B44(x) u32 x;
 409 B44_STAT_REG_DECLARE
 410 #undef _B44
 411 };
 412
 413 struct b44 {
 414         spinlock_t              lock;
 415
 416         u32                     imask, istat;
 417
 418         struct dma_desc         *rx_ring, *tx_ring;
 419
 420         u32                     tx_prod, tx_cons;
 421         u32                     rx_prod, rx_cons;
 422
 423         struct ring_info        *rx_buffers;
 424         struct ring_info        *tx_buffers;
 425
 426         u32                     dma_offset;
 427         u32                     flags;
 428 #define B44_FLAG_B0_ANDLATER    0x00000001
 429 #define B44_FLAG_BUGGY_TXPTR    0x00000002
 430 #define B44_FLAG_REORDER_BUG    0x00000004
 431 #define B44_FLAG_PAUSE_AUTO     0x00008000
 432 #define B44_FLAG_FULL_DUPLEX    0x00010000
 433 #define B44_FLAG_100_BASE_T     0x00020000
 434 #define B44_FLAG_TX_PAUSE       0x00040000
 435 #define B44_FLAG_RX_PAUSE       0x00080000
 436 #define B44_FLAG_FORCE_LINK     0x00100000
 437 #define B44_FLAG_ADV_10HALF     0x01000000
 438 #define B44_FLAG_ADV_10FULL     0x02000000
 439 #define B44_FLAG_ADV_100HALF    0x04000000
 440 #define B44_FLAG_ADV_100FULL    0x08000000
 441 #define B44_FLAG_INTERNAL_PHY   0x10000000
 442 #define B44_FLAG_RX_RING_HACK   0x20000000
 443 #define B44_FLAG_TX_RING_HACK   0x40000000
 444 #define B44_FLAG_WOL_ENABLE     0x80000000
 445
 446         u32                     rx_offset;
 447
 448         u32                     msg_enable;
 449
 450         struct timer_list       timer;
 451
 452         struct net_device_stats stats;
 453         struct b44_hw_stats     hw_stats;
 454
 455         void __iomem            *regs;
 456         struct pci_dev          *pdev;
 457         struct net_device       *dev;
 458
 459         dma_addr_t              rx_ring_dma, tx_ring_dma;
 460
 461         u32                     rx_pending;
 462         u32                     tx_pending;
 463         u8                      phy_addr;
 464         u8                      core_unit;
 465
 466         struct mii_if_info      mii_if;
 467 };
 468
 469 #endif /* _B44_H */