allow coexistance of N build and AC build.
[tomato.git] / release / src-rt-6.x / linux / linux-2.6 / drivers / media / dvb / frontends / mt352.c
blob87e31ca7e1084e9d7916468eb9038e0dae6d71a5
1 /*
2 * Driver for Zarlink DVB-T MT352 demodulator
4 * Written by Holger Waechtler <holger@qanu.de>
5 * and Daniel Mack <daniel@qanu.de>
7 * AVerMedia AVerTV DVB-T 771 support by
8 * Wolfram Joost <dbox2@frokaschwei.de>
10 * Support for Samsung TDTC9251DH01C(M) tuner
11 * Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it>
12 * Amauri Celani <acelani@essegi.net>
14 * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by
15 * Christopher Pascoe <c.pascoe@itee.uq.edu.au>
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License as published by
19 * the Free Software Foundation; either version 2 of the License, or
20 * (at your option) any later version.
22 * This program is distributed in the hope that it will be useful,
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/init.h>
37 #include <linux/delay.h>
38 #include <linux/string.h>
39 #include <linux/slab.h>
41 #include "dvb_frontend.h"
42 #include "mt352_priv.h"
43 #include "mt352.h"
45 struct mt352_state {
46 struct i2c_adapter* i2c;
47 struct dvb_frontend frontend;
49 /* configuration settings */
50 struct mt352_config config;
53 static int debug;
54 #define dprintk(args...) \
55 do { \
56 if (debug) printk(KERN_DEBUG "mt352: " args); \
57 } while (0)
59 static int mt352_single_write(struct dvb_frontend *fe, u8 reg, u8 val)
61 struct mt352_state* state = fe->demodulator_priv;
62 u8 buf[2] = { reg, val };
63 struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0,
64 .buf = buf, .len = 2 };
65 int err = i2c_transfer(state->i2c, &msg, 1);
66 if (err != 1) {
67 printk("mt352_write() to reg %x failed (err = %d)!\n", reg, err);
68 return err;
70 return 0;
73 static int _mt352_write(struct dvb_frontend* fe, u8* ibuf, int ilen)
75 int err,i;
76 for (i=0; i < ilen-1; i++)
77 if ((err = mt352_single_write(fe,ibuf[0]+i,ibuf[i+1])))
78 return err;
80 return 0;
83 static int mt352_read_register(struct mt352_state* state, u8 reg)
85 int ret;
86 u8 b0 [] = { reg };
87 u8 b1 [] = { 0 };
88 struct i2c_msg msg [] = { { .addr = state->config.demod_address,
89 .flags = 0,
90 .buf = b0, .len = 1 },
91 { .addr = state->config.demod_address,
92 .flags = I2C_M_RD,
93 .buf = b1, .len = 1 } };
95 ret = i2c_transfer(state->i2c, msg, 2);
97 if (ret != 2) {
98 printk("%s: readreg error (reg=%d, ret==%i)\n",
99 __FUNCTION__, reg, ret);
100 return ret;
103 return b1[0];
106 static int mt352_sleep(struct dvb_frontend* fe)
108 static u8 mt352_softdown[] = { CLOCK_CTL, 0x20, 0x08 };
110 _mt352_write(fe, mt352_softdown, sizeof(mt352_softdown));
111 return 0;
114 static void mt352_calc_nominal_rate(struct mt352_state* state,
115 enum fe_bandwidth bandwidth,
116 unsigned char *buf)
118 u32 adc_clock = 20480; /* 20.340 MHz */
119 u32 bw,value;
121 switch (bandwidth) {
122 case BANDWIDTH_6_MHZ:
123 bw = 6;
124 break;
125 case BANDWIDTH_7_MHZ:
126 bw = 7;
127 break;
128 case BANDWIDTH_8_MHZ:
129 default:
130 bw = 8;
131 break;
133 if (state->config.adc_clock)
134 adc_clock = state->config.adc_clock;
136 value = 64 * bw * (1<<16) / (7 * 8);
137 value = value * 1000 / adc_clock;
138 dprintk("%s: bw %d, adc_clock %d => 0x%x\n",
139 __FUNCTION__, bw, adc_clock, value);
140 buf[0] = msb(value);
141 buf[1] = lsb(value);
144 static void mt352_calc_input_freq(struct mt352_state* state,
145 unsigned char *buf)
147 int adc_clock = 20480; /* 20.480000 MHz */
148 int if2 = 36167; /* 36.166667 MHz */
149 int ife,value;
151 if (state->config.adc_clock)
152 adc_clock = state->config.adc_clock;
153 if (state->config.if2)
154 if2 = state->config.if2;
156 ife = (2*adc_clock - if2);
157 value = -16374 * ife / adc_clock;
158 dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n",
159 __FUNCTION__, if2, ife, adc_clock, value, value & 0x3fff);
160 buf[0] = msb(value);
161 buf[1] = lsb(value);
164 static int mt352_set_parameters(struct dvb_frontend* fe,
165 struct dvb_frontend_parameters *param)
167 struct mt352_state* state = fe->demodulator_priv;
168 unsigned char buf[13];
169 static unsigned char tuner_go[] = { 0x5d, 0x01 };
170 static unsigned char fsm_go[] = { 0x5e, 0x01 };
171 unsigned int tps = 0;
172 struct dvb_ofdm_parameters *op = &param->u.ofdm;
174 switch (op->code_rate_HP) {
175 case FEC_2_3:
176 tps |= (1 << 7);
177 break;
178 case FEC_3_4:
179 tps |= (2 << 7);
180 break;
181 case FEC_5_6:
182 tps |= (3 << 7);
183 break;
184 case FEC_7_8:
185 tps |= (4 << 7);
186 break;
187 case FEC_1_2:
188 case FEC_AUTO:
189 break;
190 default:
191 return -EINVAL;
194 switch (op->code_rate_LP) {
195 case FEC_2_3:
196 tps |= (1 << 4);
197 break;
198 case FEC_3_4:
199 tps |= (2 << 4);
200 break;
201 case FEC_5_6:
202 tps |= (3 << 4);
203 break;
204 case FEC_7_8:
205 tps |= (4 << 4);
206 break;
207 case FEC_1_2:
208 case FEC_AUTO:
209 break;
210 case FEC_NONE:
211 if (op->hierarchy_information == HIERARCHY_AUTO ||
212 op->hierarchy_information == HIERARCHY_NONE)
213 break;
214 default:
215 return -EINVAL;
218 switch (op->constellation) {
219 case QPSK:
220 break;
221 case QAM_AUTO:
222 case QAM_16:
223 tps |= (1 << 13);
224 break;
225 case QAM_64:
226 tps |= (2 << 13);
227 break;
228 default:
229 return -EINVAL;
232 switch (op->transmission_mode) {
233 case TRANSMISSION_MODE_2K:
234 case TRANSMISSION_MODE_AUTO:
235 break;
236 case TRANSMISSION_MODE_8K:
237 tps |= (1 << 0);
238 break;
239 default:
240 return -EINVAL;
243 switch (op->guard_interval) {
244 case GUARD_INTERVAL_1_32:
245 case GUARD_INTERVAL_AUTO:
246 break;
247 case GUARD_INTERVAL_1_16:
248 tps |= (1 << 2);
249 break;
250 case GUARD_INTERVAL_1_8:
251 tps |= (2 << 2);
252 break;
253 case GUARD_INTERVAL_1_4:
254 tps |= (3 << 2);
255 break;
256 default:
257 return -EINVAL;
260 switch (op->hierarchy_information) {
261 case HIERARCHY_AUTO:
262 case HIERARCHY_NONE:
263 break;
264 case HIERARCHY_1:
265 tps |= (1 << 10);
266 break;
267 case HIERARCHY_2:
268 tps |= (2 << 10);
269 break;
270 case HIERARCHY_4:
271 tps |= (3 << 10);
272 break;
273 default:
274 return -EINVAL;
278 buf[0] = TPS_GIVEN_1; /* TPS_GIVEN_1 and following registers */
280 buf[1] = msb(tps); /* TPS_GIVEN_(1|0) */
281 buf[2] = lsb(tps);
283 buf[3] = 0x50; // old
284 // buf[3] = 0xf4; // pinnacle
286 mt352_calc_nominal_rate(state, op->bandwidth, buf+4);
287 mt352_calc_input_freq(state, buf+6);
289 if (state->config.no_tuner) {
290 if (fe->ops.tuner_ops.set_params) {
291 fe->ops.tuner_ops.set_params(fe, param);
292 if (fe->ops.i2c_gate_ctrl)
293 fe->ops.i2c_gate_ctrl(fe, 0);
296 _mt352_write(fe, buf, 8);
297 _mt352_write(fe, fsm_go, 2);
298 } else {
299 if (fe->ops.tuner_ops.calc_regs) {
300 fe->ops.tuner_ops.calc_regs(fe, param, buf+8, 5);
301 buf[8] <<= 1;
302 _mt352_write(fe, buf, sizeof(buf));
303 _mt352_write(fe, tuner_go, 2);
307 return 0;
310 static int mt352_get_parameters(struct dvb_frontend* fe,
311 struct dvb_frontend_parameters *param)
313 struct mt352_state* state = fe->demodulator_priv;
314 u16 tps;
315 u16 div;
316 u8 trl;
317 struct dvb_ofdm_parameters *op = &param->u.ofdm;
318 static const u8 tps_fec_to_api[8] =
320 FEC_1_2,
321 FEC_2_3,
322 FEC_3_4,
323 FEC_5_6,
324 FEC_7_8,
325 FEC_AUTO,
326 FEC_AUTO,
327 FEC_AUTO
330 if ( (mt352_read_register(state,0x00) & 0xC0) != 0xC0 )
331 return -EINVAL;
333 /* Use TPS_RECEIVED-registers, not the TPS_CURRENT-registers because
334 * the mt352 sometimes works with the wrong parameters
336 tps = (mt352_read_register(state, TPS_RECEIVED_1) << 8) | mt352_read_register(state, TPS_RECEIVED_0);
337 div = (mt352_read_register(state, CHAN_START_1) << 8) | mt352_read_register(state, CHAN_START_0);
338 trl = mt352_read_register(state, TRL_NOMINAL_RATE_1);
340 op->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7];
341 op->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7];
343 switch ( (tps >> 13) & 3)
345 case 0:
346 op->constellation = QPSK;
347 break;
348 case 1:
349 op->constellation = QAM_16;
350 break;
351 case 2:
352 op->constellation = QAM_64;
353 break;
354 default:
355 op->constellation = QAM_AUTO;
356 break;
359 op->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K : TRANSMISSION_MODE_2K;
361 switch ( (tps >> 2) & 3)
363 case 0:
364 op->guard_interval = GUARD_INTERVAL_1_32;
365 break;
366 case 1:
367 op->guard_interval = GUARD_INTERVAL_1_16;
368 break;
369 case 2:
370 op->guard_interval = GUARD_INTERVAL_1_8;
371 break;
372 case 3:
373 op->guard_interval = GUARD_INTERVAL_1_4;
374 break;
375 default:
376 op->guard_interval = GUARD_INTERVAL_AUTO;
377 break;
380 switch ( (tps >> 10) & 7)
382 case 0:
383 op->hierarchy_information = HIERARCHY_NONE;
384 break;
385 case 1:
386 op->hierarchy_information = HIERARCHY_1;
387 break;
388 case 2:
389 op->hierarchy_information = HIERARCHY_2;
390 break;
391 case 3:
392 op->hierarchy_information = HIERARCHY_4;
393 break;
394 default:
395 op->hierarchy_information = HIERARCHY_AUTO;
396 break;
399 param->frequency = ( 500 * (div - IF_FREQUENCYx6) ) / 3 * 1000;
401 if (trl == 0x72)
402 op->bandwidth = BANDWIDTH_8_MHZ;
403 else if (trl == 0x64)
404 op->bandwidth = BANDWIDTH_7_MHZ;
405 else
406 op->bandwidth = BANDWIDTH_6_MHZ;
409 if (mt352_read_register(state, STATUS_2) & 0x02)
410 param->inversion = INVERSION_OFF;
411 else
412 param->inversion = INVERSION_ON;
414 return 0;
417 static int mt352_read_status(struct dvb_frontend* fe, fe_status_t* status)
419 struct mt352_state* state = fe->demodulator_priv;
420 int s0, s1, s3;
422 /* FIXME:
424 * The MT352 design manual from Zarlink states (page 46-47):
426 * Notes about the TUNER_GO register:
428 * If the Read_Tuner_Byte (bit-1) is activated, then the tuner status
429 * byte is copied from the tuner to the STATUS_3 register and
430 * completion of the read operation is indicated by bit-5 of the
431 * INTERRUPT_3 register.
434 if ((s0 = mt352_read_register(state, STATUS_0)) < 0)
435 return -EREMOTEIO;
436 if ((s1 = mt352_read_register(state, STATUS_1)) < 0)
437 return -EREMOTEIO;
438 if ((s3 = mt352_read_register(state, STATUS_3)) < 0)
439 return -EREMOTEIO;
441 *status = 0;
442 if (s0 & (1 << 4))
443 *status |= FE_HAS_CARRIER;
444 if (s0 & (1 << 1))
445 *status |= FE_HAS_VITERBI;
446 if (s0 & (1 << 5))
447 *status |= FE_HAS_LOCK;
448 if (s1 & (1 << 1))
449 *status |= FE_HAS_SYNC;
450 if (s3 & (1 << 6))
451 *status |= FE_HAS_SIGNAL;
453 if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
454 (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
455 *status &= ~FE_HAS_LOCK;
457 return 0;
460 static int mt352_read_ber(struct dvb_frontend* fe, u32* ber)
462 struct mt352_state* state = fe->demodulator_priv;
464 *ber = (mt352_read_register (state, RS_ERR_CNT_2) << 16) |
465 (mt352_read_register (state, RS_ERR_CNT_1) << 8) |
466 (mt352_read_register (state, RS_ERR_CNT_0));
468 return 0;
471 static int mt352_read_signal_strength(struct dvb_frontend* fe, u16* strength)
473 struct mt352_state* state = fe->demodulator_priv;
475 /* align the 12 bit AGC gain with the most significant bits */
476 u16 signal = ((mt352_read_register(state, AGC_GAIN_1) & 0x0f) << 12) |
477 (mt352_read_register(state, AGC_GAIN_0) << 4);
479 /* inverse of gain is signal strength */
480 *strength = ~signal;
481 return 0;
484 static int mt352_read_snr(struct dvb_frontend* fe, u16* snr)
486 struct mt352_state* state = fe->demodulator_priv;
488 u8 _snr = mt352_read_register (state, SNR);
489 *snr = (_snr << 8) | _snr;
491 return 0;
494 static int mt352_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
496 struct mt352_state* state = fe->demodulator_priv;
498 *ucblocks = (mt352_read_register (state, RS_UBC_1) << 8) |
499 (mt352_read_register (state, RS_UBC_0));
501 return 0;
504 static int mt352_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
506 fe_tune_settings->min_delay_ms = 800;
507 fe_tune_settings->step_size = 0;
508 fe_tune_settings->max_drift = 0;
510 return 0;
513 static int mt352_init(struct dvb_frontend* fe)
515 struct mt352_state* state = fe->demodulator_priv;
517 static u8 mt352_reset_attach [] = { RESET, 0xC0 };
519 dprintk("%s: hello\n",__FUNCTION__);
521 if ((mt352_read_register(state, CLOCK_CTL) & 0x10) == 0 ||
522 (mt352_read_register(state, CONFIG) & 0x20) == 0) {
524 /* Do a "hard" reset */
525 _mt352_write(fe, mt352_reset_attach, sizeof(mt352_reset_attach));
526 return state->config.demod_init(fe);
529 return 0;
532 static void mt352_release(struct dvb_frontend* fe)
534 struct mt352_state* state = fe->demodulator_priv;
535 kfree(state);
538 static struct dvb_frontend_ops mt352_ops;
540 struct dvb_frontend* mt352_attach(const struct mt352_config* config,
541 struct i2c_adapter* i2c)
543 struct mt352_state* state = NULL;
545 /* allocate memory for the internal state */
546 state = kzalloc(sizeof(struct mt352_state), GFP_KERNEL);
547 if (state == NULL) goto error;
549 /* setup the state */
550 state->i2c = i2c;
551 memcpy(&state->config,config,sizeof(struct mt352_config));
553 /* check if the demod is there */
554 if (mt352_read_register(state, CHIP_ID) != ID_MT352) goto error;
556 /* create dvb_frontend */
557 memcpy(&state->frontend.ops, &mt352_ops, sizeof(struct dvb_frontend_ops));
558 state->frontend.demodulator_priv = state;
559 return &state->frontend;
561 error:
562 kfree(state);
563 return NULL;
566 static struct dvb_frontend_ops mt352_ops = {
568 .info = {
569 .name = "Zarlink MT352 DVB-T",
570 .type = FE_OFDM,
571 .frequency_min = 174000000,
572 .frequency_max = 862000000,
573 .frequency_stepsize = 166667,
574 .frequency_tolerance = 0,
575 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
576 FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
577 FE_CAN_FEC_AUTO |
578 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
579 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
580 FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER |
581 FE_CAN_MUTE_TS
584 .release = mt352_release,
586 .init = mt352_init,
587 .sleep = mt352_sleep,
588 .write = _mt352_write,
590 .set_frontend = mt352_set_parameters,
591 .get_frontend = mt352_get_parameters,
592 .get_tune_settings = mt352_get_tune_settings,
594 .read_status = mt352_read_status,
595 .read_ber = mt352_read_ber,
596 .read_signal_strength = mt352_read_signal_strength,
597 .read_snr = mt352_read_snr,
598 .read_ucblocks = mt352_read_ucblocks,
601 module_param(debug, int, 0644);
602 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
604 MODULE_DESCRIPTION("Zarlink MT352 DVB-T Demodulator driver");
605 MODULE_AUTHOR("Holger Waechtler, Daniel Mack, Antonio Mancuso");
606 MODULE_LICENSE("GPL");
608 EXPORT_SYMBOL(mt352_attach);