allow coexistance of N build and AC build.
[tomato.git] / release / src-rt-6.x / linux / linux-2.6 / arch / ppc / platforms / ev64360.c
blobf8baf05f16ce14378dd964835845d9cd1abbeda0
1 /*
2 * Board setup routines for the Marvell EV-64360-BP Evaluation Board.
4 * Author: Lee Nicks <allinux@gmail.com>
6 * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
7 * Based on code done by - Mark A. Greer <mgreer@mvista.com>
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
14 #include <linux/kernel.h>
15 #include <linux/pci.h>
16 #include <linux/kdev_t.h>
17 #include <linux/console.h>
18 #include <linux/initrd.h>
19 #include <linux/root_dev.h>
20 #include <linux/delay.h>
21 #include <linux/seq_file.h>
22 #include <linux/bootmem.h>
23 #include <linux/mtd/physmap.h>
24 #include <linux/mv643xx.h>
25 #include <linux/platform_device.h>
26 #ifdef CONFIG_BOOTIMG
27 #include <linux/bootimg.h>
28 #endif
29 #include <asm/page.h>
30 #include <asm/time.h>
31 #include <asm/smp.h>
32 #include <asm/todc.h>
33 #include <asm/bootinfo.h>
34 #include <asm/ppcboot.h>
35 #include <asm/mv64x60.h>
36 #include <asm/machdep.h>
37 #include <platforms/ev64360.h>
39 #define BOARD_VENDOR "Marvell"
40 #define BOARD_MACHINE "EV-64360-BP"
42 static struct mv64x60_handle bh;
43 static void __iomem *sram_base;
45 static u32 ev64360_flash_size_0;
46 static u32 ev64360_flash_size_1;
48 static u32 ev64360_bus_frequency;
50 unsigned char __res[sizeof(bd_t)];
52 TODC_ALLOC();
54 static int __init
55 ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
57 return 0;
60 static void __init
61 ev64360_setup_bridge(void)
63 struct mv64x60_setup_info si;
64 int i;
66 memset(&si, 0, sizeof(si));
68 si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
70 #ifdef CONFIG_PCI
71 si.pci_1.enable_bus = 1;
72 si.pci_1.pci_io.cpu_base = EV64360_PCI1_IO_START_PROC_ADDR;
73 si.pci_1.pci_io.pci_base_hi = 0;
74 si.pci_1.pci_io.pci_base_lo = EV64360_PCI1_IO_START_PCI_ADDR;
75 si.pci_1.pci_io.size = EV64360_PCI1_IO_SIZE;
76 si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
77 si.pci_1.pci_mem[0].cpu_base = EV64360_PCI1_MEM_START_PROC_ADDR;
78 si.pci_1.pci_mem[0].pci_base_hi = EV64360_PCI1_MEM_START_PCI_HI_ADDR;
79 si.pci_1.pci_mem[0].pci_base_lo = EV64360_PCI1_MEM_START_PCI_LO_ADDR;
80 si.pci_1.pci_mem[0].size = EV64360_PCI1_MEM_SIZE;
81 si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
82 si.pci_1.pci_cmd_bits = 0;
83 si.pci_1.latency_timer = 0x80;
84 #else
85 si.pci_0.enable_bus = 0;
86 si.pci_1.enable_bus = 0;
87 #endif
89 for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
90 #if defined(CONFIG_NOT_COHERENT_CACHE)
91 si.cpu_prot_options[i] = 0;
92 si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
93 si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
94 si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
96 si.pci_1.acc_cntl_options[i] =
97 MV64360_PCI_ACC_CNTL_SNOOP_NONE |
98 MV64360_PCI_ACC_CNTL_SWAP_NONE |
99 MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
100 MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
101 #else
102 si.cpu_prot_options[i] = 0;
103 si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
104 si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
105 si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
107 si.pci_1.acc_cntl_options[i] =
108 MV64360_PCI_ACC_CNTL_SNOOP_WB |
109 MV64360_PCI_ACC_CNTL_SWAP_NONE |
110 MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
111 MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
112 #endif
115 if (mv64x60_init(&bh, &si))
116 printk(KERN_WARNING "Bridge initialization failed.\n");
118 #ifdef CONFIG_PCI
119 pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
120 ppc_md.pci_swizzle = common_swizzle;
121 ppc_md.pci_map_irq = ev64360_map_irq;
122 ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
124 mv64x60_set_bus(&bh, 1, 0);
125 bh.hose_b->first_busno = 0;
126 bh.hose_b->last_busno = 0xff;
127 #endif
130 /* Bridge & platform setup routines */
131 void __init
132 ev64360_intr_setup(void)
134 /* MPP 8, 9, and 10 */
135 mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
138 * Define GPP 8,9,and 10 interrupt polarity as active low
139 * input signal and level triggered
141 mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700);
142 mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700);
144 /* Config GPP intr ctlr to respond to level trigger */
145 mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
147 /* Erranum FEr PCI-#8 */
148 mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9));
149 mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9));
152 * Dismiss and then enable interrupt on GPP interrupt cause
153 * for CPU #0
155 mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700);
156 mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700);
159 * Dismiss and then enable interrupt on CPU #0 high cause reg
160 * BIT25 summarizes GPP interrupts 8-15
162 mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25));
165 void __init
166 ev64360_setup_peripherals(void)
168 u32 base;
170 /* Set up window for boot CS */
171 mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
172 EV64360_BOOT_WINDOW_BASE, EV64360_BOOT_WINDOW_SIZE, 0);
173 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
175 /* We only use the 32-bit flash */
176 mv64x60_get_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, &base,
177 &ev64360_flash_size_0);
178 ev64360_flash_size_1 = 0;
180 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
181 EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0);
182 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
184 TODC_INIT(TODC_TYPE_DS1501, 0, 0,
185 ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8);
187 mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
188 EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
189 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
190 sram_base = ioremap(EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
192 /* Set up Enet->SRAM window */
193 mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
194 EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2);
195 bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
197 /* Give enet r/w access to memory region */
198 mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1)));
199 mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1)));
200 mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1)));
202 mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
203 mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
204 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
206 #if defined(CONFIG_NOT_COHERENT_CACHE)
207 mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000);
208 #else
209 mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
210 #endif
213 * Setting the SRAM to 0. Note that this generates parity errors on
214 * internal data path in SRAM since it's first time accessing it
215 * while after reset it's not configured.
217 memset(sram_base, 0, MV64360_SRAM_SIZE);
219 /* set up PCI interrupt controller */
220 ev64360_intr_setup();
223 static void __init
224 ev64360_setup_arch(void)
226 if (ppc_md.progress)
227 ppc_md.progress("ev64360_setup_arch: enter", 0);
229 set_tb(0, 0);
231 #ifdef CONFIG_BLK_DEV_INITRD
232 if (initrd_start)
233 ROOT_DEV = Root_RAM0;
234 else
235 #endif
236 #ifdef CONFIG_ROOT_NFS
237 ROOT_DEV = Root_NFS;
238 #else
239 ROOT_DEV = Root_SDA2;
240 #endif
243 * Set up the L2CR register.
245 _set_L2CR(L2CR_L2E | L2CR_L2PE);
247 if (ppc_md.progress)
248 ppc_md.progress("ev64360_setup_arch: calling setup_bridge", 0);
250 ev64360_setup_bridge();
251 ev64360_setup_peripherals();
252 ev64360_bus_frequency = ev64360_bus_freq();
254 printk(KERN_INFO "%s %s port (C) 2005 Lee Nicks "
255 "(allinux@gmail.com)\n", BOARD_VENDOR, BOARD_MACHINE);
256 if (ppc_md.progress)
257 ppc_md.progress("ev64360_setup_arch: exit", 0);
260 /* Platform device data fixup routines. */
261 #if defined(CONFIG_SERIAL_MPSC)
262 static void __init
263 ev64360_fixup_mpsc_pdata(struct platform_device *pdev)
265 struct mpsc_pdata *pdata;
267 pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
269 pdata->max_idle = 40;
270 pdata->default_baud = EV64360_DEFAULT_BAUD;
271 pdata->brg_clk_src = EV64360_MPSC_CLK_SRC;
273 * TCLK (not SysCLk) is routed to BRG, then to the MPSC. On most parts,
274 * TCLK == SysCLK but on 64460, they are separate pins.
275 * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz.
277 pdata->brg_clk_freq = min(ev64360_bus_frequency, MV64x60_TCLK_FREQ_MAX);
279 #endif
281 #if defined(CONFIG_MV643XX_ETH)
282 static void __init
283 ev64360_fixup_eth_pdata(struct platform_device *pdev)
285 struct mv643xx_eth_platform_data *eth_pd;
286 static u16 phy_addr[] = {
287 EV64360_ETH0_PHY_ADDR,
288 EV64360_ETH1_PHY_ADDR,
289 EV64360_ETH2_PHY_ADDR,
292 eth_pd = pdev->dev.platform_data;
293 eth_pd->force_phy_addr = 1;
294 eth_pd->phy_addr = phy_addr[pdev->id];
295 eth_pd->tx_queue_size = EV64360_ETH_TX_QUEUE_SIZE;
296 eth_pd->rx_queue_size = EV64360_ETH_RX_QUEUE_SIZE;
298 #endif
300 static int
301 ev64360_platform_notify(struct device *dev)
303 static struct {
304 char *bus_id;
305 void ((*rtn)(struct platform_device *pdev));
306 } dev_map[] = {
307 #if defined(CONFIG_SERIAL_MPSC)
308 { MPSC_CTLR_NAME ".0", ev64360_fixup_mpsc_pdata },
309 { MPSC_CTLR_NAME ".1", ev64360_fixup_mpsc_pdata },
310 #endif
311 #if defined(CONFIG_MV643XX_ETH)
312 { MV643XX_ETH_NAME ".0", ev64360_fixup_eth_pdata },
313 { MV643XX_ETH_NAME ".1", ev64360_fixup_eth_pdata },
314 { MV643XX_ETH_NAME ".2", ev64360_fixup_eth_pdata },
315 #endif
317 struct platform_device *pdev;
318 int i;
320 if (dev && dev->bus_id)
321 for (i=0; i<ARRAY_SIZE(dev_map); i++)
322 if (!strncmp(dev->bus_id, dev_map[i].bus_id,
323 BUS_ID_SIZE)) {
325 pdev = container_of(dev,
326 struct platform_device, dev);
327 dev_map[i].rtn(pdev);
330 return 0;
333 #ifdef CONFIG_MTD_PHYSMAP
335 #ifndef MB
336 #define MB (1 << 20)
337 #endif
340 * MTD Layout.
342 * FLASH Amount: 0xff000000 - 0xffffffff
343 * ------------- -----------------------
344 * Reserved: 0xff000000 - 0xff03ffff
345 * JFFS2 file system: 0xff040000 - 0xffefffff
346 * U-boot: 0xfff00000 - 0xffffffff
348 static int __init
349 ev64360_setup_mtd(void)
351 u32 size;
352 int ptbl_entries;
353 static struct mtd_partition *ptbl;
355 size = ev64360_flash_size_0 + ev64360_flash_size_1;
356 if (!size)
357 return -ENOMEM;
359 ptbl_entries = 3;
361 if ((ptbl = kzalloc(ptbl_entries * sizeof(struct mtd_partition),
362 GFP_KERNEL)) == NULL) {
364 printk(KERN_WARNING "Can't alloc MTD partition table\n");
365 return -ENOMEM;
368 ptbl[0].name = "reserved";
369 ptbl[0].offset = 0;
370 ptbl[0].size = EV64360_MTD_RESERVED_SIZE;
371 ptbl[1].name = "jffs2";
372 ptbl[1].offset = EV64360_MTD_RESERVED_SIZE;
373 ptbl[1].size = EV64360_MTD_JFFS2_SIZE;
374 ptbl[2].name = "U-BOOT";
375 ptbl[2].offset = EV64360_MTD_RESERVED_SIZE + EV64360_MTD_JFFS2_SIZE;
376 ptbl[2].size = EV64360_MTD_UBOOT_SIZE;
378 physmap_map.size = size;
379 physmap_set_partitions(ptbl, ptbl_entries);
380 return 0;
383 arch_initcall(ev64360_setup_mtd);
384 #endif
386 static void
387 ev64360_restart(char *cmd)
389 ulong i = 0xffffffff;
390 volatile unsigned char * rtc_base = ioremap(EV64360_RTC_WINDOW_BASE,0x4000);
392 /* issue hard reset */
393 rtc_base[0xf] = 0x80;
394 rtc_base[0xc] = 0x00;
395 rtc_base[0xd] = 0x01;
396 rtc_base[0xf] = 0x83;
398 while (i-- > 0) ;
399 panic("restart failed\n");
402 static void
403 ev64360_halt(void)
405 while (1) ;
406 /* NOTREACHED */
409 static void
410 ev64360_power_off(void)
412 ev64360_halt();
413 /* NOTREACHED */
416 static int
417 ev64360_show_cpuinfo(struct seq_file *m)
419 seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
420 seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
421 seq_printf(m, "bus speed\t: %dMHz\n", ev64360_bus_frequency/1000/1000);
423 return 0;
426 static void __init
427 ev64360_calibrate_decr(void)
429 u32 freq;
431 freq = ev64360_bus_frequency / 4;
433 printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
434 (long)freq / 1000000, (long)freq % 1000000);
436 tb_ticks_per_jiffy = freq / HZ;
437 tb_to_us = mulhwu_scale_factor(freq, 1000000);
440 unsigned long __init
441 ev64360_find_end_of_memory(void)
443 return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
444 MV64x60_TYPE_MV64360);
447 static inline void
448 ev64360_set_bat(void)
450 mb();
451 mtspr(SPRN_DBAT2U, 0xf0001ffe);
452 mtspr(SPRN_DBAT2L, 0xf000002a);
453 mb();
456 #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
457 static void __init
458 ev64360_map_io(void)
460 io_block_mapping(CONFIG_MV64X60_NEW_BASE, \
461 CONFIG_MV64X60_NEW_BASE, \
462 0x00020000, _PAGE_IO);
464 #endif
466 void __init
467 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
468 unsigned long r6, unsigned long r7)
470 parse_bootinfo(find_bootinfo());
472 /* ASSUMPTION: If both r3 (bd_t pointer) and r6 (cmdline pointer)
473 * are non-zero, then we should use the board info from the bd_t
474 * structure and the cmdline pointed to by r6 instead of the
475 * information from birecs, if any. Otherwise, use the information
476 * from birecs as discovered by the preceding call to
477 * parse_bootinfo(). This rule should work with both PPCBoot, which
478 * uses a bd_t board info structure, and the kernel boot wrapper,
479 * which uses birecs.
481 if (r3 && r6) {
482 /* copy board info structure */
483 memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
484 /* copy command line */
485 *(char *)(r7+KERNELBASE) = 0;
486 strcpy(cmd_line, (char *)(r6+KERNELBASE));
488 #ifdef CONFIG_ISA
489 isa_mem_base = 0;
490 #endif
492 ppc_md.setup_arch = ev64360_setup_arch;
493 ppc_md.show_cpuinfo = ev64360_show_cpuinfo;
494 ppc_md.init_IRQ = mv64360_init_irq;
495 ppc_md.get_irq = mv64360_get_irq;
496 ppc_md.restart = ev64360_restart;
497 ppc_md.power_off = ev64360_power_off;
498 ppc_md.halt = ev64360_halt;
499 ppc_md.find_end_of_memory = ev64360_find_end_of_memory;
500 ppc_md.init = NULL;
502 ppc_md.time_init = todc_time_init;
503 ppc_md.set_rtc_time = todc_set_rtc_time;
504 ppc_md.get_rtc_time = todc_get_rtc_time;
505 ppc_md.nvram_read_val = todc_direct_read_val;
506 ppc_md.nvram_write_val = todc_direct_write_val;
507 ppc_md.calibrate_decr = ev64360_calibrate_decr;
509 #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
510 ppc_md.setup_io_mappings = ev64360_map_io;
511 ppc_md.progress = mv64x60_mpsc_progress;
512 mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
513 #endif
515 #if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
516 platform_notify = ev64360_platform_notify;
517 #endif
519 ev64360_set_bat(); /* Need for ev64360_find_end_of_memory and progress */