allow coexistance of N build and AC build.
[tomato.git] / release / src-rt-6.x / linux / linux-2.6 / arch / mips / tx4938 / toshiba_rbtx4938 / setup.c
blobf5d1ce739fcc48b6eb1442e1cf87f610a7655066
1 /*
2 * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c
4 * Setup pointers to hardware-dependent routines.
5 * Copyright (C) 2000-2001 Toshiba Corporation
7 * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
8 * terms of the GNU General Public License version 2. This program is
9 * licensed "as is" without any warranty of any kind, whether express
10 * or implied.
12 * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
14 #include <linux/init.h>
15 #include <linux/types.h>
16 #include <linux/ioport.h>
17 #include <linux/proc_fs.h>
18 #include <linux/delay.h>
19 #include <linux/interrupt.h>
20 #include <linux/console.h>
21 #include <linux/pci.h>
22 #include <linux/pm.h>
23 #include <linux/platform_device.h>
25 #include <asm/wbflush.h>
26 #include <asm/reboot.h>
27 #include <asm/irq.h>
28 #include <asm/time.h>
29 #include <asm/uaccess.h>
30 #include <asm/io.h>
31 #include <asm/bootinfo.h>
32 #include <asm/tx4938/rbtx4938.h>
33 #ifdef CONFIG_SERIAL_TXX9
34 #include <linux/tty.h>
35 #include <linux/serial.h>
36 #include <linux/serial_core.h>
37 #endif
39 extern void rbtx4938_time_init(void) __init;
40 extern char * __init prom_getcmdline(void);
41 static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr);
43 /* These functions are used for rebooting or halting the machine*/
44 extern void rbtx4938_machine_restart(char *command);
45 extern void rbtx4938_machine_halt(void);
46 extern void rbtx4938_machine_power_off(void);
48 /* clocks */
49 unsigned int txx9_master_clock;
50 unsigned int txx9_cpu_clock;
51 unsigned int txx9_gbus_clock;
53 unsigned long rbtx4938_ce_base[8];
54 unsigned long rbtx4938_ce_size[8];
55 int txboard_pci66_mode;
56 static int tx4938_pcic_trdyto; /* default: disabled */
57 static int tx4938_pcic_retryto; /* default: disabled */
58 static int tx4938_ccfg_toeon = 1;
60 struct tx4938_pcic_reg *pcicptrs[4] = {
61 tx4938_pcicptr /* default setting for TX4938 */
64 static struct {
65 unsigned long base;
66 unsigned long size;
67 } phys_regions[16] __initdata;
68 static int num_phys_regions __initdata;
70 #define PHYS_REGION_MINSIZE 0x10000
72 void rbtx4938_machine_halt(void)
74 printk(KERN_NOTICE "System Halted\n");
75 local_irq_disable();
77 while (1)
78 __asm__(".set\tmips3\n\t"
79 "wait\n\t"
80 ".set\tmips0");
83 void rbtx4938_machine_power_off(void)
85 rbtx4938_machine_halt();
86 /* no return */
89 void rbtx4938_machine_restart(char *command)
91 local_irq_disable();
93 printk("Rebooting...");
94 *rbtx4938_softresetlock_ptr = 1;
95 *rbtx4938_sfvol_ptr = 1;
96 *rbtx4938_softreset_ptr = 1;
97 wbflush();
99 while(1);
102 void __init
103 txboard_add_phys_region(unsigned long base, unsigned long size)
105 if (num_phys_regions >= ARRAY_SIZE(phys_regions)) {
106 printk("phys_region overflow\n");
107 return;
109 phys_regions[num_phys_regions].base = base;
110 phys_regions[num_phys_regions].size = size;
111 num_phys_regions++;
113 unsigned long __init
114 txboard_find_free_phys_region(unsigned long begin, unsigned long end,
115 unsigned long size)
117 unsigned long base;
118 int i;
120 for (base = begin / size * size; base < end; base += size) {
121 for (i = 0; i < num_phys_regions; i++) {
122 if (phys_regions[i].size &&
123 base <= phys_regions[i].base + (phys_regions[i].size - 1) &&
124 base + (size - 1) >= phys_regions[i].base)
125 break;
127 if (i == num_phys_regions)
128 return base;
130 return 0;
132 unsigned long __init
133 txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end,
134 unsigned long *size)
136 unsigned long sz, base;
137 for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) {
138 base = txboard_find_free_phys_region(begin, end, sz);
139 if (base) {
140 *size = sz;
141 return base;
144 return 0;
146 unsigned long __init
147 txboard_request_phys_region_range(unsigned long begin, unsigned long end,
148 unsigned long size)
150 unsigned long base;
151 base = txboard_find_free_phys_region(begin, end, size);
152 if (base)
153 txboard_add_phys_region(base, size);
154 return base;
156 unsigned long __init
157 txboard_request_phys_region(unsigned long size)
159 unsigned long base;
160 unsigned long begin = 0, end = 0x20000000; /* search low 512MB */
161 base = txboard_find_free_phys_region(begin, end, size);
162 if (base)
163 txboard_add_phys_region(base, size);
164 return base;
166 unsigned long __init
167 txboard_request_phys_region_shrink(unsigned long *size)
169 unsigned long base;
170 unsigned long begin = 0, end = 0x20000000; /* search low 512MB */
171 base = txboard_find_free_phys_region_shrink(begin, end, size);
172 if (base)
173 txboard_add_phys_region(base, *size);
174 return base;
177 #ifdef CONFIG_PCI
178 void __init
179 tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr,
180 struct pci_controller *channel,
181 unsigned long pci_io_base,
182 int extarb)
184 int i;
186 /* Disable All Initiator Space */
187 pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)|
188 TX4938_PCIC_PCICCFG_G2PMEN(1)|
189 TX4938_PCIC_PCICCFG_G2PMEN(2)|
190 TX4938_PCIC_PCICCFG_G2PIOEN);
192 /* GB->PCI mappings */
193 pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4;
194 pcicptr->g2piogbase = pci_io_base |
195 #ifdef __BIG_ENDIAN
196 TX4938_PCIC_G2PIOGBASE_ECHG
197 #else
198 TX4938_PCIC_G2PIOGBASE_BSDIS
199 #endif
201 pcicptr->g2piopbase = 0;
202 for (i = 0; i < 3; i++) {
203 pcicptr->g2pmmask[i] = 0;
204 pcicptr->g2pmgbase[i] = 0;
205 pcicptr->g2pmpbase[i] = 0;
207 if (channel->mem_resource->end) {
208 pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4;
209 pcicptr->g2pmgbase[0] = channel->mem_resource->start |
210 #ifdef __BIG_ENDIAN
211 TX4938_PCIC_G2PMnGBASE_ECHG
212 #else
213 TX4938_PCIC_G2PMnGBASE_BSDIS
214 #endif
216 pcicptr->g2pmpbase[0] = channel->mem_resource->start;
218 /* PCI->GB mappings (I/O 256B) */
219 pcicptr->p2giopbase = 0; /* 256B */
220 pcicptr->p2giogbase = 0;
221 /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
222 pcicptr->p2gm0plbase = 0;
223 pcicptr->p2gm0pubase = 0;
224 pcicptr->p2gmgbase[0] = 0 |
225 TX4938_PCIC_P2GMnGBASE_TMEMEN |
226 #ifdef __BIG_ENDIAN
227 TX4938_PCIC_P2GMnGBASE_TECHG
228 #else
229 TX4938_PCIC_P2GMnGBASE_TBSDIS
230 #endif
232 /* PCI->GB mappings (MEM 16MB) */
233 pcicptr->p2gm1plbase = 0xffffffff;
234 pcicptr->p2gm1pubase = 0xffffffff;
235 pcicptr->p2gmgbase[1] = 0;
236 /* PCI->GB mappings (MEM 1MB) */
237 pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */
238 pcicptr->p2gmgbase[2] = 0;
240 pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK;
241 /* Enable Initiator Memory Space */
242 if (channel->mem_resource->end)
243 pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0);
244 /* Enable Initiator I/O Space */
245 if (channel->io_resource->end)
246 pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN;
247 /* Enable Initiator Config */
248 pcicptr->pciccfg |=
249 TX4938_PCIC_PCICCFG_ICAEN |
250 TX4938_PCIC_PCICCFG_TCAR;
252 /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
253 pcicptr->pcicfg1 = 0;
255 pcicptr->g2ptocnt &= ~0xffff;
257 if (tx4938_pcic_trdyto >= 0) {
258 pcicptr->g2ptocnt &= ~0xff;
259 pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff);
262 if (tx4938_pcic_retryto >= 0) {
263 pcicptr->g2ptocnt &= ~0xff00;
264 pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00);
267 /* Clear All Local Bus Status */
268 pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL;
269 /* Enable All Local Bus Interrupts */
270 pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL;
271 /* Clear All Initiator Status */
272 pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL;
273 /* Enable All Initiator Interrupts */
274 pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL;
275 /* Clear All PCI Status Error */
276 pcicptr->pcistatus =
277 (pcicptr->pcistatus & 0x0000ffff) |
278 (TX4938_PCIC_PCISTATUS_ALL << 16);
279 /* Enable All PCI Status Error Interrupts */
280 pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL;
282 if (!extarb) {
283 /* Reset Bus Arbiter */
284 pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA;
285 pcicptr->pbabm = 0;
286 /* Enable Bus Arbiter */
287 pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN;
290 /* PCIC Int => IRC IRQ16 */
291 pcicptr->pcicfg2 =
292 (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC;
294 pcicptr->pcistatus = PCI_COMMAND_MASTER |
295 PCI_COMMAND_MEMORY |
296 PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
299 int __init
300 tx4938_report_pciclk(void)
302 unsigned long pcode = TX4938_REV_PCODE();
303 int pciclk = 0;
304 printk("TX%lx PCIC --%s PCICLK:",
305 pcode,
306 (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : "");
307 if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
309 switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) {
310 case TX4938_CCFG_PCIDIVMODE_4:
311 pciclk = txx9_cpu_clock / 4; break;
312 case TX4938_CCFG_PCIDIVMODE_4_5:
313 pciclk = txx9_cpu_clock * 2 / 9; break;
314 case TX4938_CCFG_PCIDIVMODE_5:
315 pciclk = txx9_cpu_clock / 5; break;
316 case TX4938_CCFG_PCIDIVMODE_5_5:
317 pciclk = txx9_cpu_clock * 2 / 11; break;
318 case TX4938_CCFG_PCIDIVMODE_8:
319 pciclk = txx9_cpu_clock / 8; break;
320 case TX4938_CCFG_PCIDIVMODE_9:
321 pciclk = txx9_cpu_clock / 9; break;
322 case TX4938_CCFG_PCIDIVMODE_10:
323 pciclk = txx9_cpu_clock / 10; break;
324 case TX4938_CCFG_PCIDIVMODE_11:
325 pciclk = txx9_cpu_clock / 11; break;
327 printk("Internal(%dMHz)", pciclk / 1000000);
328 } else {
329 printk("External");
330 pciclk = -1;
332 printk("\n");
333 return pciclk;
336 void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr)
338 pcicptrs[ch] = pcicptr;
341 struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch)
343 return pcicptrs[ch];
346 static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
347 int top_bus, int busnr, int devfn)
349 static struct pci_dev dev;
350 static struct pci_bus bus;
352 dev.sysdata = (void *)hose;
353 dev.devfn = devfn;
354 bus.number = busnr;
355 bus.ops = hose->pci_ops;
356 bus.parent = NULL;
357 dev.bus = &bus;
359 return &dev;
362 #define EARLY_PCI_OP(rw, size, type) \
363 static int early_##rw##_config_##size(struct pci_controller *hose, \
364 int top_bus, int bus, int devfn, int offset, type value) \
366 return pci_##rw##_config_##size( \
367 fake_pci_dev(hose, top_bus, bus, devfn), \
368 offset, value); \
371 EARLY_PCI_OP(read, word, u16 *)
373 int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus)
375 u32 pci_devfn;
376 unsigned short vid;
377 int devfn_start = 0;
378 int devfn_stop = 0xff;
379 int cap66 = -1;
380 u16 stat;
382 printk("PCI: Checking 66MHz capabilities...\n");
384 for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
385 early_read_config_word(hose, top_bus, current_bus, pci_devfn,
386 PCI_VENDOR_ID, &vid);
388 if (vid == 0xffff) continue;
390 /* check 66MHz capability */
391 if (cap66 < 0)
392 cap66 = 1;
393 if (cap66) {
394 early_read_config_word(hose, top_bus, current_bus, pci_devfn,
395 PCI_STATUS, &stat);
396 if (!(stat & PCI_STATUS_66MHZ)) {
397 printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n",
398 current_bus, pci_devfn);
399 cap66 = 0;
400 break;
404 return cap66 > 0;
407 int __init
408 tx4938_pciclk66_setup(void)
410 int pciclk;
412 /* Assert M66EN */
413 tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66;
414 /* Double PCICLK (if possible) */
415 if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
416 unsigned int pcidivmode =
417 tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK;
418 switch (pcidivmode) {
419 case TX4938_CCFG_PCIDIVMODE_8:
420 case TX4938_CCFG_PCIDIVMODE_4:
421 pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
422 pciclk = txx9_cpu_clock / 4;
423 break;
424 case TX4938_CCFG_PCIDIVMODE_9:
425 case TX4938_CCFG_PCIDIVMODE_4_5:
426 pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
427 pciclk = txx9_cpu_clock * 2 / 9;
428 break;
429 case TX4938_CCFG_PCIDIVMODE_10:
430 case TX4938_CCFG_PCIDIVMODE_5:
431 pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
432 pciclk = txx9_cpu_clock / 5;
433 break;
434 case TX4938_CCFG_PCIDIVMODE_11:
435 case TX4938_CCFG_PCIDIVMODE_5_5:
436 default:
437 pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
438 pciclk = txx9_cpu_clock * 2 / 11;
439 break;
441 tx4938_ccfgptr->ccfg =
442 (tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK)
443 | pcidivmode;
444 printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
445 (unsigned long)tx4938_ccfgptr->ccfg);
446 } else {
447 pciclk = -1;
449 return pciclk;
452 extern struct pci_controller tx4938_pci_controller[];
453 static int __init tx4938_pcibios_init(void)
455 unsigned long mem_base[2];
456 unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0,TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */
457 unsigned long io_base[2];
458 unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0,TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */
459 /* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */
460 int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB);
462 PCIBIOS_MIN_IO = 0x00001000UL;
463 PCIBIOS_MIN_MEM = 0x01000000UL;
465 mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]);
466 io_base[0] = txboard_request_phys_region_shrink(&io_size[0]);
468 printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
469 (unsigned short)(tx4938_pcicptr->pciid >> 16),
470 (unsigned short)(tx4938_pcicptr->pciid & 0xffff),
471 (unsigned short)(tx4938_pcicptr->pciccrev & 0xff),
472 extarb ? "External" : "Internal");
474 /* setup PCI area */
475 tx4938_pci_controller[0].io_resource->start = io_base[0];
476 tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1;
477 tx4938_pci_controller[0].mem_resource->start = mem_base[0];
478 tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1;
480 set_tx4938_pcicptr(0, tx4938_pcicptr);
482 register_pci_controller(&tx4938_pci_controller[0]);
484 if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) {
485 printk("TX4938_CCFG_PCI66 already configured\n");
486 txboard_pci66_mode = -1; /* already configured */
489 /* Reset PCI Bus */
490 *rbtx4938_pcireset_ptr = 0;
491 /* Reset PCIC */
492 tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
493 if (txboard_pci66_mode > 0)
494 tx4938_pciclk66_setup();
495 mdelay(10);
496 /* clear PCIC reset */
497 tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
498 *rbtx4938_pcireset_ptr = 1;
499 wbflush();
500 tx4938_report_pcic_status1(tx4938_pcicptr);
502 tx4938_report_pciclk();
503 tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
504 if (txboard_pci66_mode == 0 &&
505 txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) {
506 /* Reset PCI Bus */
507 *rbtx4938_pcireset_ptr = 0;
508 /* Reset PCIC */
509 tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
510 tx4938_pciclk66_setup();
511 mdelay(10);
512 /* clear PCIC reset */
513 tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
514 *rbtx4938_pcireset_ptr = 1;
515 wbflush();
516 /* Reinitialize PCIC */
517 tx4938_report_pciclk();
518 tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
521 mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]);
522 io_base[1] = txboard_request_phys_region_shrink(&io_size[1]);
523 /* Reset PCIC1 */
524 tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST;
525 /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
526 if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD))
527 tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66;
528 else
529 tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66;
530 mdelay(10);
531 /* clear PCIC1 reset */
532 tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
533 tx4938_report_pcic_status1(tx4938_pcic1ptr);
535 printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x",
536 (unsigned short)(tx4938_pcic1ptr->pciid >> 16),
537 (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff),
538 (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff));
539 printk("%s PCICLK:%dMHz\n",
540 (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "",
541 txx9_gbus_clock /
542 ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) /
543 1000000);
545 /* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */
546 tx4938_pci_controller[1].io_resource->start =
547 io_base[1] - io_base[0];
548 tx4938_pci_controller[1].io_resource->end =
549 io_base[1] - io_base[0] + io_size[1] - 1;
550 tx4938_pci_controller[1].mem_resource->start = mem_base[1];
551 tx4938_pci_controller[1].mem_resource->end =
552 mem_base[1] + mem_size[1] - 1;
553 set_tx4938_pcicptr(1, tx4938_pcic1ptr);
555 register_pci_controller(&tx4938_pci_controller[1]);
557 tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb);
559 /* map ioport 0 to PCI I/O space address 0 */
560 set_io_port_base(KSEG1 + io_base[0]);
562 return 0;
565 arch_initcall(tx4938_pcibios_init);
567 #endif /* CONFIG_PCI */
569 /* SPI support */
571 /* chip select for SPI devices */
572 #define SEEPROM1_CS 7 /* PIO7 */
573 #define SEEPROM2_CS 0 /* IOC */
574 #define SEEPROM3_CS 1 /* IOC */
575 #define SRTC_CS 2 /* IOC */
577 static int rbtx4938_spi_cs_func(int chipid, int on)
579 unsigned char bit;
580 switch (chipid) {
581 case RBTX4938_SEEPROM1_CHIPID:
582 if (on)
583 tx4938_pioptr->dout &= ~(1 << SEEPROM1_CS);
584 else
585 tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
586 return 0;
587 break;
588 case RBTX4938_SEEPROM2_CHIPID:
589 bit = (1 << SEEPROM2_CS);
590 break;
591 case RBTX4938_SEEPROM3_CHIPID:
592 bit = (1 << SEEPROM3_CS);
593 break;
594 case RBTX4938_SRTC_CHIPID:
595 bit = (1 << SRTC_CS);
596 break;
597 default:
598 return -ENODEV;
600 /* bit1,2,4 are low active, bit3 is high active */
601 *rbtx4938_spics_ptr =
602 (*rbtx4938_spics_ptr & ~bit) |
603 ((on ? (bit ^ 0x0b) : ~(bit ^ 0x0b)) & bit);
604 return 0;
607 #ifdef CONFIG_PCI
608 extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len);
610 int rbtx4938_get_tx4938_ethaddr(struct pci_dev *dev, unsigned char *addr)
612 struct pci_controller *channel = (struct pci_controller *)dev->bus->sysdata;
613 static unsigned char dat[17];
614 static int read_dat = 0;
615 int ch = 0;
617 if (channel != &tx4938_pci_controller[1])
618 return -ENODEV;
619 /* TX4938 PCIC1 */
620 switch (PCI_SLOT(dev->devfn)) {
621 case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
622 ch = 0;
623 break;
624 case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
625 ch = 1;
626 break;
627 default:
628 return -ENODEV;
630 if (!read_dat) {
631 unsigned char sum;
632 int i;
633 read_dat = 1;
634 /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
635 if (spi_eeprom_read(RBTX4938_SEEPROM1_CHIPID,
636 0, dat, sizeof(dat))) {
637 printk(KERN_ERR "seeprom: read error.\n");
638 } else {
639 if (strcmp(dat, "MAC") != 0)
640 printk(KERN_WARNING "seeprom: bad signature.\n");
641 for (i = 0, sum = 0; i < sizeof(dat); i++)
642 sum += dat[i];
643 if (sum)
644 printk(KERN_WARNING "seeprom: bad checksum.\n");
647 memcpy(addr, &dat[4 + 6 * ch], 6);
648 return 0;
650 #endif /* CONFIG_PCI */
652 extern void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on));
653 static void __init rbtx4938_spi_setup(void)
655 /* set SPI_SEL */
656 tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL;
657 /* chip selects for SPI devices */
658 tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
659 tx4938_pioptr->dir |= (1 << SEEPROM1_CS);
660 txx9_spi_init(TX4938_SPI_REG, rbtx4938_spi_cs_func);
663 static struct resource rbtx4938_fpga_resource;
665 static char pcode_str[8];
666 static struct resource tx4938_reg_resource = {
667 .start = TX4938_REG_BASE,
668 .end = TX4938_REG_BASE + TX4938_REG_SIZE,
669 .name = pcode_str,
670 .flags = IORESOURCE_MEM
673 void __init tx4938_board_setup(void)
675 int i;
676 unsigned long divmode;
677 int cpuclk = 0;
678 unsigned long pcode = TX4938_REV_PCODE();
680 ioport_resource.start = 0x1000;
681 ioport_resource.end = 0xffffffff;
682 iomem_resource.start = 0x1000;
683 iomem_resource.end = 0xffffffff; /* expand to 4GB */
685 sprintf(pcode_str, "TX%lx", pcode);
686 /* SDRAMC,EBUSC are configured by PROM */
687 for (i = 0; i < 8; i++) {
688 if (!(tx4938_ebuscptr->cr[i] & 0x8))
689 continue; /* disabled */
690 rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
691 txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i));
694 /* clocks */
695 if (txx9_master_clock) {
696 /* calculate gbus_clock and cpu_clock from master_clock */
697 divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
698 switch (divmode) {
699 case TX4938_CCFG_DIVMODE_8:
700 case TX4938_CCFG_DIVMODE_10:
701 case TX4938_CCFG_DIVMODE_12:
702 case TX4938_CCFG_DIVMODE_16:
703 case TX4938_CCFG_DIVMODE_18:
704 txx9_gbus_clock = txx9_master_clock * 4; break;
705 default:
706 txx9_gbus_clock = txx9_master_clock;
708 switch (divmode) {
709 case TX4938_CCFG_DIVMODE_2:
710 case TX4938_CCFG_DIVMODE_8:
711 cpuclk = txx9_gbus_clock * 2; break;
712 case TX4938_CCFG_DIVMODE_2_5:
713 case TX4938_CCFG_DIVMODE_10:
714 cpuclk = txx9_gbus_clock * 5 / 2; break;
715 case TX4938_CCFG_DIVMODE_3:
716 case TX4938_CCFG_DIVMODE_12:
717 cpuclk = txx9_gbus_clock * 3; break;
718 case TX4938_CCFG_DIVMODE_4:
719 case TX4938_CCFG_DIVMODE_16:
720 cpuclk = txx9_gbus_clock * 4; break;
721 case TX4938_CCFG_DIVMODE_4_5:
722 case TX4938_CCFG_DIVMODE_18:
723 cpuclk = txx9_gbus_clock * 9 / 2; break;
725 txx9_cpu_clock = cpuclk;
726 } else {
727 if (txx9_cpu_clock == 0) {
728 txx9_cpu_clock = 300000000; /* 300MHz */
730 /* calculate gbus_clock and master_clock from cpu_clock */
731 cpuclk = txx9_cpu_clock;
732 divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
733 switch (divmode) {
734 case TX4938_CCFG_DIVMODE_2:
735 case TX4938_CCFG_DIVMODE_8:
736 txx9_gbus_clock = cpuclk / 2; break;
737 case TX4938_CCFG_DIVMODE_2_5:
738 case TX4938_CCFG_DIVMODE_10:
739 txx9_gbus_clock = cpuclk * 2 / 5; break;
740 case TX4938_CCFG_DIVMODE_3:
741 case TX4938_CCFG_DIVMODE_12:
742 txx9_gbus_clock = cpuclk / 3; break;
743 case TX4938_CCFG_DIVMODE_4:
744 case TX4938_CCFG_DIVMODE_16:
745 txx9_gbus_clock = cpuclk / 4; break;
746 case TX4938_CCFG_DIVMODE_4_5:
747 case TX4938_CCFG_DIVMODE_18:
748 txx9_gbus_clock = cpuclk * 2 / 9; break;
750 switch (divmode) {
751 case TX4938_CCFG_DIVMODE_8:
752 case TX4938_CCFG_DIVMODE_10:
753 case TX4938_CCFG_DIVMODE_12:
754 case TX4938_CCFG_DIVMODE_16:
755 case TX4938_CCFG_DIVMODE_18:
756 txx9_master_clock = txx9_gbus_clock / 4; break;
757 default:
758 txx9_master_clock = txx9_gbus_clock;
761 /* change default value to udelay/mdelay take reasonable time */
762 loops_per_jiffy = txx9_cpu_clock / HZ / 2;
764 /* CCFG */
765 /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
766 tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW;
767 /* clear PCIC1 reset */
768 if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST)
769 tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
771 /* enable Timeout BusError */
772 if (tx4938_ccfg_toeon)
773 tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE;
775 /* DMA selection */
776 tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL;
778 /* Use external clock for external arbiter */
779 if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB))
780 tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL;
782 printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n",
783 pcode_str,
784 cpuclk / 1000000, txx9_master_clock / 1000000,
785 (unsigned long)tx4938_ccfgptr->crir,
786 tx4938_ccfgptr->ccfg,
787 tx4938_ccfgptr->pcfg);
789 printk("%s SDRAMC --", pcode_str);
790 for (i = 0; i < 4; i++) {
791 unsigned long long cr = tx4938_sdramcptr->cr[i];
792 unsigned long ram_base, ram_size;
793 if (!((unsigned long)cr & 0x00000400))
794 continue; /* disabled */
795 ram_base = (unsigned long)(cr >> 49) << 21;
796 ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
797 if (ram_base >= 0x20000000)
798 continue; /* high memory (ignore) */
799 printk(" CR%d:%016Lx", i, cr);
800 txboard_add_phys_region(ram_base, ram_size);
802 printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
804 /* SRAM */
805 if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) {
806 unsigned int size = 0x800;
807 unsigned long base =
808 (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
809 txboard_add_phys_region(base, size);
812 /* IRC */
813 /* disable interrupt control */
814 tx4938_ircptr->cer = 0;
816 /* TMR */
817 /* disable all timers */
818 for (i = 0; i < TX4938_NR_TMR; i++) {
819 tx4938_tmrptr(i)->tcr = 0x00000020;
820 tx4938_tmrptr(i)->tisr = 0;
821 tx4938_tmrptr(i)->cpra = 0xffffffff;
822 tx4938_tmrptr(i)->itmr = 0;
823 tx4938_tmrptr(i)->ccdr = 0;
824 tx4938_tmrptr(i)->pgmr = 0;
827 /* enable DMA */
828 TX4938_WR64(0xff1fb150, TX4938_DMA_MCR_MSTEN);
829 TX4938_WR64(0xff1fb950, TX4938_DMA_MCR_MSTEN);
831 /* PIO */
832 tx4938_pioptr->maskcpu = 0;
833 tx4938_pioptr->maskext = 0;
835 /* TX4938 internal registers */
836 if (request_resource(&iomem_resource, &tx4938_reg_resource))
837 printk("request resource for internal registers failed\n");
840 #ifdef CONFIG_PCI
841 static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr)
843 unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16);
844 unsigned long g2pstatus = pcicptr->g2pstatus;
845 unsigned long pcicstatus = pcicptr->pcicstatus;
846 static struct {
847 unsigned long flag;
848 const char *str;
849 } pcistat_tbl[] = {
850 { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" },
851 { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" },
852 { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" },
853 { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" },
854 { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" },
855 { PCI_STATUS_PARITY, "MasterParityError" },
856 }, g2pstat_tbl[] = {
857 { TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" },
858 { TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" },
859 }, pcicstat_tbl[] = {
860 { TX4938_PCIC_PCICSTATUS_PME, "PME" },
861 { TX4938_PCIC_PCICSTATUS_TLB, "TLB" },
862 { TX4938_PCIC_PCICSTATUS_NIB, "NIB" },
863 { TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" },
864 { TX4938_PCIC_PCICSTATUS_PERR, "PERR" },
865 { TX4938_PCIC_PCICSTATUS_SERR, "SERR" },
866 { TX4938_PCIC_PCICSTATUS_GBE, "GBE" },
867 { TX4938_PCIC_PCICSTATUS_IWB, "IWB" },
869 int i;
871 printk("pcistat:%04x(", pcistatus);
872 for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
873 if (pcistatus & pcistat_tbl[i].flag)
874 printk("%s ", pcistat_tbl[i].str);
875 printk("), g2pstatus:%08lx(", g2pstatus);
876 for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
877 if (g2pstatus & g2pstat_tbl[i].flag)
878 printk("%s ", g2pstat_tbl[i].str);
879 printk("), pcicstatus:%08lx(", pcicstatus);
880 for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
881 if (pcicstatus & pcicstat_tbl[i].flag)
882 printk("%s ", pcicstat_tbl[i].str);
883 printk(")\n");
886 void tx4938_report_pcic_status(void)
888 int i;
889 struct tx4938_pcic_reg *pcicptr;
890 for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++)
891 tx4938_report_pcic_status1(pcicptr);
894 #endif /* CONFIG_PCI */
896 /* We use onchip r4k counter or TMR timer as our system wide timer
897 * interrupt running at 100HZ. */
899 extern void __init rtc_rx5c348_init(int chipid);
900 void __init rbtx4938_time_init(void)
902 rtc_rx5c348_init(RBTX4938_SRTC_CHIPID);
903 mips_hpt_frequency = txx9_cpu_clock / 2;
906 void __init toshiba_rbtx4938_setup(void)
908 unsigned long long pcfg;
909 char *argptr;
911 iomem_resource.end = 0xffffffff; /* 4GB */
913 if (txx9_master_clock == 0)
914 txx9_master_clock = 25000000; /* 25MHz */
915 tx4938_board_setup();
916 /* setup irq stuff */
917 TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000000); /* irq trigger */
918 TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM1), 0x00000000); /* irq trigger */
919 /* setup serial stuff */
920 TX4938_WR(0xff1ff314, 0x00000000); /* h/w flow control off */
921 TX4938_WR(0xff1ff414, 0x00000000); /* h/w flow control off */
923 #ifndef CONFIG_PCI
924 set_io_port_base(RBTX4938_ETHER_BASE);
925 #endif
927 #ifdef CONFIG_SERIAL_TXX9
929 extern int early_serial_txx9_setup(struct uart_port *port);
930 int i;
931 struct uart_port req;
932 for(i = 0; i < 2; i++) {
933 memset(&req, 0, sizeof(req));
934 req.line = i;
935 req.iotype = UPIO_MEM;
936 req.membase = (char *)(0xff1ff300 + i * 0x100);
937 req.mapbase = 0xff1ff300 + i * 0x100;
938 req.irq = 32 + i;
939 req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
940 req.uartclk = 50000000;
941 early_serial_txx9_setup(&req);
944 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
945 argptr = prom_getcmdline();
946 if (strstr(argptr, "console=") == NULL) {
947 strcat(argptr, " console=ttyS0,38400");
949 #endif
950 #endif
952 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
953 printk("PIOSEL: disabling both ata and nand selection\n");
954 local_irq_disable();
955 tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
956 #endif
958 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
959 printk("PIOSEL: enabling nand selection\n");
960 tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL;
961 tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL;
962 #endif
964 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
965 printk("PIOSEL: enabling ata selection\n");
966 tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL;
967 tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL;
968 #endif
970 #ifdef CONFIG_IP_PNP
971 argptr = prom_getcmdline();
972 if (strstr(argptr, "ip=") == NULL) {
973 strcat(argptr, " ip=any");
975 #endif
978 #ifdef CONFIG_FB
980 conswitchp = &dummy_con;
982 #endif
984 rbtx4938_spi_setup();
985 pcfg = tx4938_ccfgptr->pcfg; /* updated */
986 /* fixup piosel */
987 if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
988 TX4938_PCFG_ATA_SEL) {
989 *rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x04;
991 else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
992 TX4938_PCFG_NDF_SEL) {
993 *rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x08;
995 else {
996 *rbtx4938_piosel_ptr &= ~(0x08 | 0x04);
999 rbtx4938_fpga_resource.name = "FPGA Registers";
1000 rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
1001 rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
1002 rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
1003 if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
1004 printk("request resource for fpga failed\n");
1006 /* disable all OnBoard I/O interrupts */
1007 *rbtx4938_imask_ptr = 0;
1009 _machine_restart = rbtx4938_machine_restart;
1010 _machine_halt = rbtx4938_machine_halt;
1011 pm_power_off = rbtx4938_machine_power_off;
1013 *rbtx4938_led_ptr = 0xff;
1014 printk("RBTX4938 --- FPGA(Rev %02x)", *rbtx4938_fpga_rev_ptr);
1015 printk(" DIPSW:%02x,%02x\n",
1016 *rbtx4938_dipsw_ptr, *rbtx4938_bdipsw_ptr);
1019 #ifdef CONFIG_PROC_FS
1020 extern void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid);
1021 static int __init tx4938_spi_proc_setup(void)
1023 struct proc_dir_entry *tx4938_spi_eeprom_dir;
1025 tx4938_spi_eeprom_dir = proc_mkdir("spi_eeprom", 0);
1027 if (!tx4938_spi_eeprom_dir)
1028 return -ENOMEM;
1030 /* don't allow user access to RBTX4938_SEEPROM1_CHIPID
1031 * as it contains eth0 and eth1 MAC addresses
1033 spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM2_CHIPID);
1034 spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM3_CHIPID);
1036 return 0;
1039 __initcall(tx4938_spi_proc_setup);
1040 #endif
1042 static int __init rbtx4938_ne_init(void)
1044 struct resource res[] = {
1046 .start = RBTX4938_RTL_8019_BASE,
1047 .end = RBTX4938_RTL_8019_BASE + 0x20 - 1,
1048 .flags = IORESOURCE_IO,
1049 }, {
1050 .start = RBTX4938_RTL_8019_IRQ,
1051 .flags = IORESOURCE_IRQ,
1054 struct platform_device *dev =
1055 platform_device_register_simple("ne", -1,
1056 res, ARRAY_SIZE(res));
1057 return IS_ERR(dev) ? PTR_ERR(dev) : 0;
1059 device_initcall(rbtx4938_ne_init);