release/src-rt-6.x/linux/linux-2.6/arch/mips/momentum/ocelot_c/cpci-irq.c

   1 /*
   2  * Copyright 2002 Momentum Computer
   3  * Author: mdharm@momenco.com
   4  *
   5  * arch/mips/momentum/ocelot_c/cpci-irq.c
   6  *     Interrupt routines for cpci.  Interrupt numbers are assigned from
   7  *     CPCI_IRQ_BASE to CPCI_IRQ_BASE+8 (8 interrupt sources).
   8  *
   9  * Note that the high-level software will need to be careful about using
  10  * these interrupts.  If this board is asserting a cPCI interrupt, it will
  11  * also see the asserted interrupt.  Care must be taken to avoid an
  12  * interrupt flood.
  13  *
  14  * This program is free software; you can redistribute  it and/or modify it
  15  * under  the terms of  the GNU General  Public License as published by the
  16  * Free Software Foundation;  either version 2 of the  License, or (at your
  17  * option) any later version.
  18  */
  19
  20 #include <linux/module.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/irq.h>
  23 #include <linux/kernel.h>
  24 #include <linux/sched.h>
  25 #include <linux/kernel_stat.h>
  26 #include <asm/io.h>
  27 #include "ocelot_c_fpga.h"
  28
  29 #define CPCI_IRQ_BASE   8
  30
  31 static inline int ls1bit8(unsigned int x)
  32 {
  33         int b = 7, s;
  34
  35         s =  4; if (((unsigned char)(x <<  4)) == 0) s = 0; b -= s; x <<= s;
  36         s =  2; if (((unsigned char)(x <<  2)) == 0) s = 0; b -= s; x <<= s;
  37         s =  1; if (((unsigned char)(x <<  1)) == 0) s = 0; b -= s;
  38
  39         return b;
  40 }
  41
  42 /* mask off an interrupt -- 0 is enable, 1 is disable */
  43 static inline void mask_cpci_irq(unsigned int irq)
  44 {
  45         uint32_t value;
  46
  47         value = OCELOT_FPGA_READ(INTMASK);
  48         value |= 1 << (irq - CPCI_IRQ_BASE);
  49         OCELOT_FPGA_WRITE(value, INTMASK);
  50
  51         /* read the value back to assure that it's really been written */
  52         value = OCELOT_FPGA_READ(INTMASK);
  53 }
  54
  55 /* unmask an interrupt -- 0 is enable, 1 is disable */
  56 static inline void unmask_cpci_irq(unsigned int irq)
  57 {
  58         uint32_t value;
  59
  60         value = OCELOT_FPGA_READ(INTMASK);
  61         value &= ~(1 << (irq - CPCI_IRQ_BASE));
  62         OCELOT_FPGA_WRITE(value, INTMASK);
  63
  64         /* read the value back to assure that it's really been written */
  65         value = OCELOT_FPGA_READ(INTMASK);
  66 }
  67
  68 /*
  69  * Interrupt handler for interrupts coming from the FPGA chip.
  70  * It could be built in ethernet ports etc...
  71  */
  72 void ll_cpci_irq(void)
  73 {
  74         unsigned int irq_src, irq_mask;
  75
  76         /* read the interrupt status registers */
  77         irq_src = OCELOT_FPGA_READ(INTSTAT);
  78         irq_mask = OCELOT_FPGA_READ(INTMASK);
  79
  80         /* mask for just the interrupts we want */
  81         irq_src &= ~irq_mask;
  82
  83         do_IRQ(ls1bit8(irq_src) + CPCI_IRQ_BASE);
  84 }
  85
  86 struct irq_chip cpci_irq_type = {
  87         .name = "CPCI/FPGA",
  88         .ack = mask_cpci_irq,
  89         .mask = mask_cpci_irq,
  90         .mask_ack = mask_cpci_irq,
  91         .unmask = unmask_cpci_irq,
  92 };
  93
  94 void cpci_irq_init(void)
  95 {
  96         int i;
  97
  98         for (i = CPCI_IRQ_BASE; i < (CPCI_IRQ_BASE + 8); i++)
  99                 set_irq_chip_and_handler(i, &cpci_irq_type, handle_level_irq);
 100 }