release/src/Makefile

   1 #
   2 # Toplevel Makefile for the BCM947xx Linux Router release
   3 #
   4 # Copyright 2005, Broadcom Corporation
   5 # All Rights Reserved.
   6 #
   7 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11 #
  12 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  13 #
  14
  15 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  16
  17 # To rebuild everything and all configurations:
  18 #  make distclean
  19 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m
  20 # The 1st "whatever" would be the build number, the sub-whatever would
  21 #       be the update to the version.
  22 #
  23 # Example:
  24 # make V1=8516 V2="-jffs.1" a b c d m s
  25
  26 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  27
  28
  29
  30 export SRCBASE := $(shell pwd)
  31 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  32 PATH := $(RELEASEDIR)/tools:$(PATH)
  33 export TPROFILE := N
  34
  35 include ./target.mak
  36
  37 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  38 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  39 V1 ?= "--def"
  40 VPN ?= "VPN"
  41 NC ?="NOCAT"
  42 ifeq ($(CONFIG_LINUX26),y)
  43 ND = "K26"
  44 else
  45 ND = "ND"
  46 endif
  47 SNMP ?= "n"
  48 VLAN ?= "n"
  49 PPTP ?= "n"
  50
  51 ifeq ($(NVRAM_SIZE),)
  52 NVRAM_SIZE = 0
  53 endif
  54
  55 -include tomato_profile.mak
  56
  57 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  58 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  59 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  60 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  61 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  62 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  63 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  64
  65 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
  66 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
  67 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
  68 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
  69
  70 ifeq ($(CONFIG_LINUX26),y)
  71 mips_rev = $(if $(filter $(MIPS32),r2),MIPSR2,MIPSR1)
  72 KERN_SIZE_OPT ?= n
  73 else
  74 mips_rev =
  75 KERN_SIZE_OPT ?= y
  76 endif
  77
  78 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
  79
  80 tomato_ver:
  81         @echo ""
  82         @btools/uversion.pl --gen $(V1) $(mips_rev)$(beta)$(V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
  83
  84 ifeq ($(TOMATO_BUILD),)
  85
  86 all:
  87         $(MAKE) a
  88
  89 else
  90
  91 all: tomato_ver
  92         @echo ""
  93         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
  94
  95         @echo ""
  96         @echo ""
  97
  98         @-mkdir image
  99         @$(MAKE) -C router all
 100         @$(MAKE) -C router install
 101         @$(MAKE) -C btools
 102
 103         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx
 104         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 105 ifeq ($(WRT54),y)
 106 ifneq ($(MIPS32),r2)
 107         @rm -f image/tomato-WRT54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 108         @rm -f image/tomato-WRTSL54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 109         @rm -f image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 110 endif
 111 endif
 112 ifeq ($(LINKSYS_E),y)
 113         @rm -f image/tomato-E??00$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 114 endif
 115 ifeq ($(BELKIN),y)
 116 ifneq ($(NVRAM_SIZE),60)
 117         @rm -f image/tomato-F7D????$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 118         @rm -f image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 119 endif
 120 endif
 121         @echo "" >>fpkg.log
 122         @echo "***********************" `date` "************************" >>fpkg.log
 123         @cat router/shared/tomato_version >>fpkg.log
 124         @echo "" >>fpkg.log
 125         @cat router/target.info >>fpkg.log
 126 ifeq ($(WRT54),y)
 127 ifneq ($(MIPS32),r2)
 128         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 129                 -l W54G,image/tomato-WRT54G_WRT54GL$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 130                 -l W54S,image/tomato-WRT54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 131                 -l W54s,image/tomato-WRT54GSv4$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 132                 -l W54U,image/tomato-WRTSL54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 133                 -m 0x10577050,image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 134                 | tee -a fpkg.log
 135 endif
 136 endif
 137 ifeq ($(LINKSYS_E),y)
 138         # Linksys E-series images
 139         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 140                 -l 4200,image/tomato-E4200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 141                 -l 61XN,image/tomato-E3000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 142                 -l 32XN,image/tomato-E2000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 143                 | tee -a fpkg.log
 144 endif
 145 ifeq ($(BELKIN),y)
 146 ifneq ($(NVRAM_SIZE),60)
 147         # Create Belkin images
 148         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 149                 -b 0x20100322,image/tomato-F7D3301$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 150                 -b 0x20090928,image/tomato-F7D3302$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 151                 -b 0x20091006,image/tomato-F7D4302$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 152                 -b 0x00017116,image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 153                 | tee -a fpkg.log
 154 endif
 155 endif
 156         # Create generic TRX image
 157         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 158                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 159                 | tee -a fpkg.log
 160
 161         @cp fpkg.log image/fpkg-$(V1)$(mips_rev)$(beta)$(V2).log
 162         @echo ""
 163         @echo "-----------------"
 164         @echo `cat router/shared/tomato_version` " ready"
 165         @echo "-----------------"
 166 ifneq ($(NOVERSION),1)
 167         @cp router/shared/tomato_version router/shared/tomato_version_last
 168         @btools/uversion.pl --bump
 169 endif
 170 endif
 171
 172
 173
 174 clean:
 175         @touch router/.config
 176         @rm -f router/config_[a-z]
 177         @rm -f router/busybox/config_[a-z]
 178         @$(MAKE) -C router $@
 179         @-rmdir router/mipsel-uclibc
 180
 181 cleanimage:
 182         @rm -f fpkg.log
 183         @rm -fr image/*
 184         @rm -f router/.config
 185         @touch router/.config
 186         @-mkdir image
 187
 188 cleantools:
 189         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 190         @$(MAKE) -C btools clean
 191
 192 cleankernel:
 193         @cd $(LINUXDIR) && \
 194         mv .config save-config && \
 195         $(MAKE) distclean || true; \
 196         cp -p save-config .config || true
 197
 198 kernel:
 199         @$(MAKE) -C router kernel
 200         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 201
 202 distclean: clean cleanimage cleankernel cleantools
 203 ifneq ($(INSIDE_MAK),1)
 204         @$(MAKE) -C router $@ INSIDE_MAK=1
 205 endif
 206         mv router/busybox/.config busybox-saved-config || true
 207         @$(MAKE) -C router/busybox distclean
 208         @rm -f router/busybox/config_current
 209         @cp -p busybox-saved-config router/busybox/.config || true
 210         @cp -p router/busybox/.config  router/busybox/config_current || true
 211         @rm -f router/config_current
 212         @rm -f router/.config.cmd router/.config.old router/.config
 213         @rm -f router/libfoo_xref.txt
 214         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 215         @touch tomato_profile.mak
 216         @touch router/shared/tomato_profile.h
 217
 218
 219 prepk:
 220         @cd $(LINUXDIR) ; \
 221                 rm -f config_current ; \
 222                 ln -s config_base config_current ; \
 223                 cp -f config_current .config
 224         $(MAKE) -C $(LINUXDIR) oldconfig
 225 ifneq ($(CONFIG_LINUX26),y)
 226         $(MAKE) -C $(LINUXDIR) dep
 227 endif
 228
 229 what:
 230         @echo ""
 231         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 232         @echo ""
 233
 234
 235 # The methodology for making the different builds is to
 236 # copy the "base" config file to the "target" config file in
 237 # the appropriate directory, and then edit it by removing and
 238 # inserting the desired configuration lines.
 239 # You can't just delete the "whatever=y" line, you must have
 240 # a "...is not set" line, or the make oldconfig will stop and ask
 241 # what to do.
 242
 243 # Options for "make bin" :
 244 # BUILD_DESC (Std|Lite|Ext|...)
 245 # MIPS32 (r2|r1)
 246 # KERN_SIZE_OPT
 247 # USB ("USB"|"")
 248 # JFFSv1 | NO_JFFS
 249 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT
 250 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM
 251 # NOCAT
 252 # SNMP
 253 # PPTP
 254 # VLAN
 255
 256 define RouterOptions
 257         @( \
 258         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 259                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 260                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 261         fi; \
 262         sed -i "/TCONFIG_EMF/d" $(1); \
 263         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 264                 if [ "$(SLIM)" = "y" ]; then \
 265                         echo "# TCONFIG_EMF is not set" >>$(1); \
 266                 else \
 267                         echo "TCONFIG_EMF=y" >>$(1); \
 268                 fi; \
 269         else \
 270                 echo "# TCONFIG_EMF is not set" >>$(1); \
 271         fi; \
 272         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 273         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 274                 if [ "$(JFFSv1)" = "y" ]; then \
 275                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 276                 else \
 277                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 278                 fi; \
 279         else \
 280                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 281         fi; \
 282         if [ "$(USB)" = "USB" ]; then \
 283                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 284                 echo "TCONFIG_USB=y" >>$(1); \
 285                 if [ "$(USBEXTRAS)" = "y" ]; then \
 286                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 287                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 288                 fi; \
 289                 if [ "$(NTFS)" = "y" ]; then \
 290                         sed -i "/TCONFIG_NTFS/d" $(1); \
 291                         echo "TCONFIG_NTFS=y" >>$(1); \
 292                 fi; \
 293                 if [ "$(MEDIASRV)" = "y" ]; then \
 294                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 295                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 296                 fi; \
 297         else \
 298                 sed -i "/TCONFIG_USB=y/d" $(1); \
 299                 echo "# TCONFIG_USB is not set" >>$(1); \
 300         fi; \
 301         if [ "$(NO_SAMBA)" = "y" ]; then \
 302                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 303                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 304         fi; \
 305         if [ "$(NO_ZEBRA)" = "y" ]; then \
 306                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 307                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 308         fi; \
 309         if [ "$(NO_JFFS)" = "y" ]; then \
 310                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 311                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 312                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 313                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 314         fi; \
 315         if [ "$(NO_CIFS)" = "y" ]; then \
 316                 sed -i "/TCONFIG_CIFS/d" $(1); \
 317                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 318         fi; \
 319         if [ "$(NO_SSH)" = "y" ]; then \
 320                 sed -i "/TCONFIG_SSH/d" $(1); \
 321                 echo "# TCONFIG_SSH is not set" >>$(1); \
 322         fi; \
 323         if [ "$(NO_HTTPS)" = "y" ]; then \
 324                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 325                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 326         fi; \
 327         if [ "$(NO_XXTP)" = "y" ]; then \
 328                 sed -i "/TCONFIG_L2TP/d" $(1); \
 329                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 330                 sed -i "/TCONFIG_PPTP/d" $(1); \
 331                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 332         fi; \
 333         if [ "$(NO_LIBOPT)" = "y" ]; then \
 334                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 335                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 336         fi; \
 337         if [ "$(EBTABLES)" = "y" ]; then \
 338                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 339                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 340         fi; \
 341         if [ "$(IPV6SUPP)" = "y" ]; then \
 342                 sed -i "/TCONFIG_IPV6/d" $(1); \
 343                 echo "TCONFIG_IPV6=y" >>$(1); \
 344         fi; \
 345         if [ "$(NOCAT)" = "y" ]; then \
 346                 sed -i "/TCONFIG_NOCAT/d" $(1); \
 347                 echo "TCONFIG_NOCAT=y" >>$(1); \
 348         fi; \
 349         if [ "$(OPENVPN)" = "y" ]; then \
 350                 sed -i "/TCONFIG_LZO/d" $(1); \
 351                 echo "TCONFIG_LZO=y" >>$(1); \
 352                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 353                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 354                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 355                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 356                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 357                 fi; \
 358         fi; \
 359         if [ "$(SNMP)" = "y" ]; then \
 360                 sed -i "/TCONFIG_SNMP/d" $(1); \
 361                 echo "TCONFIG_SNMP=y" >>$(1); \
 362         fi; \
 363         if [ "$(PPTP)" = "y" ]; then \
 364                 sed -i "/TCONFIG_PPTP/d" $(1); \
 365                 echo "TCONFIG_PPTP=y" >>$(1); \
 366         fi; \
 367         if [ "$(VLAN)" = "y" ]; then \
 368                 sed -i "/TCONFIG_VLAN/d" $(1); \
 369                 echo "TCONFIG_VLAN=y" >>$(1); \
 370         fi; \
 371         )
 372 endef
 373
 374 define BusyboxOptions
 375         @( \
 376         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 377                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 378                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 379                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 380                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 381                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 382                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 383                 sed -i "/CONFIG_MKNOD/d" $(1); \
 384                 echo "CONFIG_MKNOD=y" >>$(1); \
 385                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 386                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 387         fi; \
 388         if [ "$(NO_CIFS)" = "y" ]; then \
 389                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 390                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 391         fi; \
 392         if [ "$(BBEXTRAS)" = "y" ]; then \
 393                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 394                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 395                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 396                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 397                 sed -i "/CONFIG_FTPPUT/d" $(1); \
 398                 echo "CONFIG_FTPPUT=y" >>$(1); \
 399                 sed -i "/CONFIG_FTPGET/d" $(1); \
 400                 echo "CONFIG_FTPGET=y" >>$(1); \
 401                 sed -i "/CONFIG_CLEAR/d" $(1); \
 402                 echo "CONFIG_CLEAR=y" >>$(1); \
 403                 sed -i "/CONFIG_NICE/d" $(1); \
 404                 echo "CONFIG_NICE=y" >>$(1); \
 405                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 406                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 407                 sed -i "/CONFIG_MKFIFO/d" $(1); \
 408                 echo "CONFIG_MKFIFO=y" >>$(1); \
 409         fi; \
 410         if [ "$(USB)" = "USB" ]; then \
 411                 if [ "$(USBEXTRAS)" = "y" ]; then \
 412                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 413                         echo "CONFIG_E2FSCK=y" >>$(1); \
 414                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 415                         echo "CONFIG_MKE2FS=y" >>$(1); \
 416                         sed -i "/CONFIG_FDISK/d" $(1); \
 417                         echo "CONFIG_FDISK=y" >>$(1); \
 418                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 419                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 420                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 421                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 422                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 423                         echo "CONFIG_MKSWAP=y" >>$(1); \
 424                         sed -i "/CONFIG_FLOCK/d" $(1); \
 425                         echo "CONFIG_FLOCK=y" >>$(1); \
 426                         sed -i "/CONFIG_FSYNC/d" $(1); \
 427                         echo "CONFIG_FSYNC=y" >>$(1); \
 428                         sed -i "/CONFIG_UNZIP/d" $(1); \
 429                         echo "CONFIG_UNZIP=y" >>$(1); \
 430                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 431                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 432                                 echo "CONFIG_LSUSB=y" >>$(1); \
 433                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 434                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 435                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 436                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 437                         fi; \
 438                 fi; \
 439         else \
 440                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 441                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 442                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 443                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 444                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 445                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 446                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 447                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 448                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 449                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 450                 sed -i "/CONFIG_BLKID/d" $(1); \
 451                 echo "# CONFIG_BLKID is not set" >>$(1); \
 452                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 453                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 454                 sed -i "/CONFIG_CHROOT/d" $(1); \
 455                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 456                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 457                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 458                 sed -i "/CONFIG_TRUE/d" $(1); \
 459                 echo "# CONFIG_TRUE is not set" >>$(1); \
 460         fi; \
 461         if [ "$(IPV6SUPP)" = "y" ]; then \
 462                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 463                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 464                 sed -i "/CONFIG_PING6/d" $(1); \
 465                 echo "CONFIG_PING6=y" >>$(1); \
 466                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 467                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 468                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 469                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 470                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 471                 fi; \
 472         fi; \
 473         if [ "$(SLIM)" = "y" ]; then \
 474                 sed -i "/CONFIG_AWK/d" $(1); \
 475                 echo "# CONFIG_AWK is not set" >>$(1); \
 476                 sed -i "/CONFIG_BASENAME/d" $(1); \
 477                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 478                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 479                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 480                 sed -i "/CONFIG_BLKID/d" $(1); \
 481                 echo "# CONFIG_BLKID is not set" >>$(1); \
 482                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 483                 echo "# CONFIG_TELNET is not set" >>$(1); \
 484                 sed -i "/CONFIG_ARPING/d" $(1); \
 485                 echo "# CONFIG_ARPING is not set" >>$(1); \
 486                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 487                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 488                 sed -i "/CONFIG_CHOWN/d" $(1); \
 489                 echo "# CONFIG_CHOWN is not set" >>$(1); \
 490         else \
 491                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 492                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 493                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 494                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 495         fi; \
 496         )
 497 endef
 498
 499 define KernelConfig
 500         @( \
 501         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 502         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 503         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 504         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 505                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 506         else \
 507                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 508         fi; \
 509         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 510                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 511                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 512                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 513                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 514                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 515                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 516         fi; \
 517         if [ "$(USB)" = "" ]; then \
 518                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 519                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 520         fi; \
 521         if [ "$(IPV6SUPP)" = "y" ]; then \
 522                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 523                 echo "CONFIG_IPV6=y" >>$(1); \
 524                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 525                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 526                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 527                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 528                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 529                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 530                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 531                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 532                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 533                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 534                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 535                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 536                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 537                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 538                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 539                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 540                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 541                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 542                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 543                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 544                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 545                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 546                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 547                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 548                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 549                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 550                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 551                         sed -i "/CONFIG_IPV6_OPTIMISTIC_DAD/d" $(1); \
 552                         echo "CONFIG_IPV6_OPTIMISTIC_DAD=y" >>$(1); \
 553                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 554                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 555                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 556                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 557                 else \
 558                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 559                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 560                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 561                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 562                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 563                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 564                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 565                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 566                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 567                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 568                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 569                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 570                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 571                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 572                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 573                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 574                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 575                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 576                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 577                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 578                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 579                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 580                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 581                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 582                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 583                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 584                 fi; \
 585         fi; \
 586         sed -i "/CONFIG_BCM57XX/d" $(1); \
 587         if [ "$(BCM57)" = "y" ]; then \
 588                 echo "CONFIG_BCM57XX=m" >>$(1); \
 589         else \
 590                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 591         fi; \
 592         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 593                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 594                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 595                 if [ "$(IPV6SUPP)" = "y" ]; then \
 596                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 597                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 598                 fi; \
 599         fi; \
 600         )
 601 endef
 602
 603
 604 bin:
 605 ifeq ($(B),)
 606         @echo $@" is not a valid target!"
 607         @false
 608 endif
 609         @cp router/config_base router/config_$(lowercase_B)
 610         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 611         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 612
 613         $(call RouterOptions, router/config_$(lowercase_B))
 614         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 615         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 616
 617         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)"
 618         @$(MAKE) all
 619
 620 ## Make the "normal" build
 621 a:
 622         @$(MAKE) bin B=A BUILD_DESC="Std" USB="USB" VLAN="$(VLAN)" SNMP=y
 623
 624 ## Make the "normal but without SSH" build
 625 b:
 626         @$(MAKE) bin NO_SSH=y B=B BUILD_DESC="No SSH" USB="USB" VLAN="$(VLAN)" SNMP=y
 627
 628 ## Make the "normal but without CIFS" build
 629 c:
 630         @$(MAKE) bin NO_CIFS=y B=C BUILD_DESC="No CIFS" USB="USB" VLAN="$(VLAN)" SNMP=y
 631
 632 ## Make the "normal but without SAMBA" (Lite) build
 633 d:
 634 ifeq ($(CONFIG_LINUX26),y)
 635         @$(MAKE) bin NO_SAMBA=y SLIM=y NO_CIFS=y NO_JFFS=y NO_ZEBRA=y B=D BUILD_DESC="Lite" USB="USB" VLAN="$(VLAN)" SNMP="$(SNMP)"
 636 else
 637         @$(MAKE) bin NO_SAMBA=y SLIM=y B=D BUILD_DESC="Lite" USB="USB" VLAN="$(VLAN)" SNMP="$(SNMP)"
 638 endif
 639
 640 ## Make the "normal (with NTFS support) + VPN" build
 641 e:
 642 ifeq ($(CONFIG_LINUX26),y)
 643         @$(MAKE) bin OPENVPN=y PPTP=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" SNMP=y
 644 else
 645 #       @$(MAKE) bin OPENVPN=y PPTP=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)"
 646         @$(MAKE) bin OPENVPN=y PPTP=y BBEXTRAS=y USBEXTRAS=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB" SNMP=y VLAN="$(VLAN)"
 647 endif
 648
 649 ## Make the "Mini: no USB, no CIFS, no Zebra" build - targeted for Netgear routers
 650 f:
 651         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y SLIM=y B=F BUILD_DESC="Mini" USB="" VLAN="$(VLAN)"
 652
 653 ## Make the "Tiny: no JFFS, no USB, no CIFS, no Zebra" build - targeted for cheapskate routers
 654 fs:
 655         @$(MAKE) bin NO_CIFS=y NO_JFFS=y NO_ZEBRA=y SLIM=y B=FS BUILD_DESC="Tiny" USB="" VLAN="$(VLAN)"
 656
 657 ## Make the "No USB with IPv6, no Zebra" build - for 4MB routers
 658 i:
 659         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB="" VLAN="$(VLAN)"
 660
 661 ## Make the "No USB with IPv6, no Zebra, with VPN" build - for 4MB routers
 662 ifeq ($(CONFIG_LINUX26),y)
 663 j:
 664         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_XXTP=y SLIM=y NO_SAMBA=y NO_ZEBRA=y IPV6SUPP=y OPENVPN=y PPTP=y NO_LIBOPT=y B=I BUILD_DESC="MiniIPv6-VPN" USB="" VLAN="$(VLAN)" SNMP="$(SNMP)"
 665 endif
 666
 667 ## Make the "normal with Extras and NTFS" build
 668 m:
 669 ifeq ($(CONFIG_LINUX26),y)
 670         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Ext" USB="USB" VLAN="$(VLAN)" SNMP=y PPTP=y
 671 else
 672         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Ext" USB="USB" VLAN="$(VLAN)" SNMP=y PPTP=y
 673 endif
 674
 675 ## Roadkill
 676 ## Make the "normal (with NTFS support) + VPN + NOCAT" build
 677 nc:
 678 ifeq ($(CONFIG_LINUX26),y)
 679         @$(MAKE) bin OPENVPN=y PPTP=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=NC BUILD_DESC="$(VPN)" USB="USB" SNMP=y VLAN="$(VLAN)" NOCAT=y BUILD_DESC+="-$(NC)"
 680 else
 681         @$(MAKE) bin OPENVPN=y PPTP=y NTFS=y B=NC BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" NOCAT=y BUILD_DESC+=" $(NC)"
 682 endif
 683
 684 ## Toastman
 685 ## Make the "Mini: no USB, + NOCAT" build - for 4MB routers
 686 ncm:
 687         @$(MAKE) bin JFFSv1=y NOCAT=y B=F BUILD_DESC="Mini-NOCAT" USB="" VLAN="$(VLAN)"
 688
 689 ## Toastman
 690 ## Make the "normal" build + NOCAT
 691 ncs:
 692         @$(MAKE) bin NOCAT=y B=A BUILD_DESC="Std-NOCAT" USB="USB" SNMP=y VLAN="$(VLAN)"
 693
 694
 695 ## Make the "No USB" build
 696 s:
 697 ifeq ($(CONFIG_LINUX26),y)
 698         @$(MAKE) bin JFFSv1=y $(if $(filter r2, $(MIPS32)),,BCM57=y) B=S BUILD_DESC="Std" USB="" SNMP=y VLAN="$(VLAN)"
 699 else
 700         @$(MAKE) bin BBEXTRAS=y BCM57=y B=S BUILD_DESC="Std" USB="" VLAN="$(VLAN)"
 701 endif
 702
 703
 704 ## Make the "No USB with Extras" build (K26 only, for 8MB flash)
 705 ifeq ($(CONFIG_LINUX26),y)
 706 t:
 707         @$(MAKE) bin B=S USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y BUILD_DESC="Std" SNMP=y VLAN="$(VLAN)"
 708 ## Make the "No USB with OpenVPN and Extras" build (K26 only, for 8MB flash)
 709 u:
 710         @$(MAKE) bin B=V USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y OPENVPN=y PPTP=y BUILD_DESC="$(VPN)"  SNMP=y VLAN="$(VLAN)"
 711 endif
 712
 713 ## Make the "VPN with no USB support" build
 714 v:
 715 ifeq ($(CONFIG_LINUX26),y)
 716         @$(MAKE) bin OPENVPN=y PPTP=y NO_JFFS=y B=V BUILD_DESC="$(VPN)" USB=""  SNMP=y VLAN="$(VLAN)"
 717 else
 718         @$(MAKE) bin OPENVPN=y PPTP=y BBEXTRAS=y BCM57=y B=V BUILD_DESC="$(VPN)" USB=""  SNMP=y VLAN="$(VLAN)"
 719 endif
 720
 721 ## Make the "Small VPN with no USB support" build
 722 vs:
 723 ifeq ($(CONFIG_LINUX26),y)
 724         @$(MAKE) bin OPENVPN=y PPTP=y NO_JFFS=y NO_CIFS=y B=V BUILD_DESC="SmallVPN" USB=""
 725 else
 726         @$(MAKE) bin OPENVPN=y PPTP=y NO_JFFS=y NO_CIFS=y BCM57=y B=VS BUILD_DESC="SmallVPN" USB=""
 727 endif
 728
 729 ## Make Mips32r2 builds
 730
 731 r2a:
 732         @$(MAKE) a MIPS32=r2
 733
 734 r2b:
 735         @$(MAKE) b MIPS32=r2
 736
 737 r2c:
 738         @$(MAKE) c MIPS32=r2
 739
 740 r2d:
 741         @$(MAKE) d MIPS32=r2
 742
 743 r2e:
 744         @$(MAKE) e MIPS32=r2
 745
 746 r2f:
 747         @$(MAKE) f MIPS32=r2 BELKIN=y
 748
 749 r2i:
 750         @$(MAKE) i MIPS32=r2
 751
 752 r2j:
 753         @$(MAKE) j MIPS32=r2
 754
 755 r2m:
 756         @$(MAKE) m MIPS32=r2
 757
 758 r2n:
 759         @$(MAKE) n MIPS32=r2
 760
 761 r2nc:
 762         @$(MAKE) nc MIPS32=r2
 763
 764 r2r:
 765         @$(MAKE) r MIPS32=r2
 766
 767 r2s:
 768         @$(MAKE) s MIPS32=r2
 769
 770 r2t:
 771         @$(MAKE) t MIPS32=r2
 772
 773 r2v:
 774         @$(MAKE) v MIPS32=r2
 775
 776 r2vs:
 777         @$(MAKE) vs MIPS32=r2
 778
 779 n60a:
 780         @$(MAKE) r2a NVRAM_SIZE=60 LINKSYS_E=y
 781
 782 n60b:
 783         @$(MAKE) r2b NVRAM_SIZE=60 LINKSYS_E=y
 784
 785 n60c:
 786         @$(MAKE) r2c NVRAM_SIZE=60 LINKSYS_E=y
 787
 788 n60e:
 789         @$(MAKE) r2e NVRAM_SIZE=60 LINKSYS_E=y
 790
 791 n60m:
 792         @$(MAKE) r2m NVRAM_SIZE=60 LINKSYS_E=y
 793
 794 n60n:
 795         @$(MAKE) r2n NVRAM_SIZE=60 LINKSYS_E=y
 796
 797 n60nc:
 798         @$(MAKE) r2nc NVRAM_SIZE=60 LINKSYS_E=y
 799
 800 n60o:
 801         @$(MAKE) r2o NVRAM_SIZE=60 LINKSYS_E=y
 802
 803 n60r:
 804         @$(MAKE) r2r NVRAM_SIZE=60 LINKSYS_E=y
 805
 806 n60s:
 807         @$(MAKE) bin MIPS32=r2 B=S USB="" NVRAM_SIZE=60 LINKSYS_E=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y BUILD_DESC="Std"
 808
 809 n60t:
 810         @$(MAKE) r2t NVRAM_SIZE=60 LINKSYS_E=y
 811
 812 n60v:
 813         @$(MAKE) bin MIPS32=r2 B=V USB="" NVRAM_SIZE=60 LINKSYS_E=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y OPENVPN=y PPTP=y BUILD_DESC="$(VPN)"
 814
 815
 816 setprofile:
 817         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
 818         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
 819         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
 820         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
 821         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
 822         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
 823         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
 824         echo '#define TOMATO_BUILD_DESC "$(DESC)"' >> router/shared/tomato_profile.h
 825         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
 826         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
 827         echo '#endif' >> router/shared/tomato_profile.h
 828         echo '#endif' >> router/shared/tomato_profile.h
 829
 830         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
 831         echo 'PROFILE_G = 1' >> tomato_profile.mak
 832         echo 'PROFILE_N = 2' >> tomato_profile.mak
 833         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
 834         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
 835         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
 836         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
 837         echo 'TOMATO_BUILD_DESC = "$(DESC)"' >> tomato_profile.mak
 838         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
 839         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
 840         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
 841
 842         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE))' >> tomato_profile.mak
 843
 844 # Note that changes to variables in tomato_profile.mak don't
 845 # get propogated to this invocation of make!
 846         @echo ""
 847         @echo "Using $(N) profile, $(B) build config."
 848         @echo ""
 849
 850         @cd $(LINUXDIR) ; \
 851                 rm -f config_current ; \
 852                 ln -s config_$(lowercase_B) config_current ; \
 853                 cp -f config_current .config
 854
 855         @cd router/busybox && \
 856                 rm -f config_current ; \
 857                 ln -s config_$(lowercase_B) config_current ; \
 858                 cp config_current .config
 859
 860         @cd router ; \
 861                 rm -f config_current ; \
 862                 ln -s config_$(lowercase_B) config_current ; \
 863                 cp config_current .config
 864
 865         @$(MAKE) -C router oldconfig
 866
 867 help:
 868         @echo "a            A build (standard)"
 869         @echo "b            B build (standard minus SSH)"
 870         @echo "c            C build (standard minus CIFS)"
 871         @echo "d            D build (standard minus Samba server)"
 872         @echo "m            M build (standard plus extra utilities and NTFS support)"
 873         @echo "nc           NC build (standard plus VPN, extra utilities, NTFS support and NOCAT)"
 874         @echo "ncm          NCS build (no USB support, NOCAT)"
 875         @echo "ncs          NCS build (std + NOCAT)"
 876         @echo "m            Ext - (standard plus extra utilities and NTFS support)"
 877
 878 ifeq ($(CONFIG_LINUX26),y)
 879         @echo "e            E build (standard plus VPN, extra utilities and NTFS support)"
 880         @echo "i            I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
 881 else
 882         @echo "e            E build (standard plus VPN and NTFS support)"
 883 endif
 884         @echo "s            S build (no USB support)"
 885         @echo "f            F build (no USB support minus CIFS and RIPv1/2)"
 886         @echo "v            V build (VPN with no USB support)"
 887
 888 ifeq ($(CONFIG_LINUX26),y)
 889         @echo "r2a          MIPS Release 2 A build (standard)"
 890         @echo "r2b          MIPS Release 2 B build (standard minus SSH)"
 891         @echo "r2c          MIPS Release 2 V build (standard minus CIFS)"
 892         @echo "r2d          MIPS Release 2 D build (standard minus Samba server)"
 893         @echo "r2e          MIPS Release 2 E build (standard plus VPN and extras)"
 894         @echo "r2f          MIPS Release 2 F build (no USB support minus CIFS and RIPv1/2)"
 895         @echo "r2i          MIPS Release 2 I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
 896         @echo "r2m          MIPS Release 2 M build (standard plus extras)"
 897         @echo "r2nc         MIPS Release 2 NC build (standard plus VPN, extras and NOCAT)"
 898         @echo "r2s          MIPS Release 2 S build (no USB support)"
 899         @echo "r2v          MIPS Release 2 V build (VPN with no USB support)"
 900         @echo "r2v          MIPS Release 2 V build (Small VPN with no USB support)"
 901         @echo "n60m         Linksys E-series build (60KB NVRAM, standard plus extras)"
 902         @echo "n60e         Linksys E-series build (60KB NVRAM, standard plus VPN and extras)"
 903         @echo "n60nc        Linksys E-series build (60KB NVRAM, standard plus extras, plus VPN, plus NOCAT)"
 904         @echo "n60s         Linksys E-series build (60KB NVRAM, no USB support)"
 905         @echo "n60v         Linksys E-series build (60KB NVRAM, VPN with no USB support)"
 906 endif
 907         @echo "..etc..      other build configs"
 908         @echo "clean        -C router clean"
 909         @echo "cleanimage   rm -rf image"
 910         @echo "cleantools   clean btools, mksquashfs"
 911         @echo "cleankernel  -C Linux distclean (but preserves .config)"
 912         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
 913         @echo "prepk        -C Linux oldconfig dep"
 914
 915 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
 916 .PHONY: a b c d m Makefile allversions tomato_profile.mak