release/src-rt-6.x.4708/linux/linux-2.6.36/include/linux/amba/pl022.h

   1 /*
   2  * include/linux/amba/pl022.h
   3  *
   4  * Copyright (C) 2008-2009 ST-Ericsson AB
   5  * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
   6  *
   7  * Author: Linus Walleij <linus.walleij@stericsson.com>
   8  *
   9  * Initial version inspired by:
  10  *      linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
  11  * Initial adoption to PL022 by:
  12  *      Sachin Verma <sachin.verma@st.com>
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License as published by
  16  * the Free Software Foundation; either version 2 of the License, or
  17  * (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  */
  24
  25 #ifndef _SSP_PL022_H
  26 #define _SSP_PL022_H
  27
  28 #include <linux/device.h>
  29
  30 /**
  31  * whether SSP is in loopback mode or not
  32  */
  33 enum ssp_loopback {
  34         LOOPBACK_DISABLED,
  35         LOOPBACK_ENABLED
  36 };
  37
  38 /**
  39  * enum ssp_interface - interfaces allowed for this SSP Controller
  40  * @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface
  41  * @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial
  42  * interface
  43  * @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire
  44  * interface
  45  * @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810
  46  * &STn8815 only)
  47  */
  48 enum ssp_interface {
  49         SSP_INTERFACE_MOTOROLA_SPI,
  50         SSP_INTERFACE_TI_SYNC_SERIAL,
  51         SSP_INTERFACE_NATIONAL_MICROWIRE,
  52         SSP_INTERFACE_UNIDIRECTIONAL
  53 };
  54
  55 /**
  56  * enum ssp_hierarchy - whether SSP is configured as Master or Slave
  57  */
  58 enum ssp_hierarchy {
  59         SSP_MASTER,
  60         SSP_SLAVE
  61 };
  62
  63 /**
  64  * enum ssp_clock_params - clock parameters, to set SSP clock at a
  65  * desired freq
  66  */
  67 struct ssp_clock_params {
  68         u8 cpsdvsr; /* value from 2 to 254 (even only!) */
  69         u8 scr;     /* value from 0 to 255 */
  70 };
  71
  72 /**
  73  * enum ssp_rx_endian - endianess of Rx FIFO Data
  74  * this feature is only available in ST versionf of PL022
  75  */
  76 enum ssp_rx_endian {
  77         SSP_RX_MSB,
  78         SSP_RX_LSB
  79 };
  80
  81 /**
  82  * enum ssp_tx_endian - endianess of Tx FIFO Data
  83  */
  84 enum ssp_tx_endian {
  85         SSP_TX_MSB,
  86         SSP_TX_LSB
  87 };
  88
  89 /**
  90  * enum ssp_data_size - number of bits in one data element
  91  */
  92 enum ssp_data_size {
  93         SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6,
  94         SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9,
  95         SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12,
  96         SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15,
  97         SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18,
  98         SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21,
  99         SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24,
 100         SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27,
 101         SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30,
 102         SSP_DATA_BITS_31, SSP_DATA_BITS_32
 103 };
 104
 105 /**
 106  * enum ssp_mode - SSP mode of operation (Communication modes)
 107  */
 108 enum ssp_mode {
 109         INTERRUPT_TRANSFER,
 110         POLLING_TRANSFER,
 111         DMA_TRANSFER
 112 };
 113
 114 /**
 115  * enum ssp_rx_level_trig - receive FIFO watermark level which triggers
 116  * IT: Interrupt fires when _N_ or more elements in RX FIFO.
 117  */
 118 enum ssp_rx_level_trig {
 119         SSP_RX_1_OR_MORE_ELEM,
 120         SSP_RX_4_OR_MORE_ELEM,
 121         SSP_RX_8_OR_MORE_ELEM,
 122         SSP_RX_16_OR_MORE_ELEM,
 123         SSP_RX_32_OR_MORE_ELEM
 124 };
 125
 126 /**
 127  * Transmit FIFO watermark level which triggers (IT Interrupt fires
 128  * when _N_ or more empty locations in TX FIFO)
 129  */
 130 enum ssp_tx_level_trig {
 131         SSP_TX_1_OR_MORE_EMPTY_LOC,
 132         SSP_TX_4_OR_MORE_EMPTY_LOC,
 133         SSP_TX_8_OR_MORE_EMPTY_LOC,
 134         SSP_TX_16_OR_MORE_EMPTY_LOC,
 135         SSP_TX_32_OR_MORE_EMPTY_LOC
 136 };
 137
 138 /**
 139  * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
 140  * @SSP_CLK_FIRST_EDGE: Receive data on first edge transition (actual direction depends on polarity)
 141  * @SSP_CLK_SECOND_EDGE: Receive data on second edge transition (actual direction depends on polarity)
 142  */
 143 enum ssp_spi_clk_phase {
 144         SSP_CLK_FIRST_EDGE,
 145         SSP_CLK_SECOND_EDGE
 146 };
 147
 148 /**
 149  * enum SPI Clock Polarity - clock polarity (Motorola SPI interface only)
 150  * @SSP_CLK_POL_IDLE_LOW: Low inactive level
 151  * @SSP_CLK_POL_IDLE_HIGH: High inactive level
 152  */
 153 enum ssp_spi_clk_pol {
 154         SSP_CLK_POL_IDLE_LOW,
 155         SSP_CLK_POL_IDLE_HIGH
 156 };
 157
 158 /**
 159  * Microwire Conrol Lengths Command size in microwire format
 160  */
 161 enum ssp_microwire_ctrl_len {
 162         SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6,
 163         SSP_BITS_7, SSP_BITS_8, SSP_BITS_9,
 164         SSP_BITS_10, SSP_BITS_11, SSP_BITS_12,
 165         SSP_BITS_13, SSP_BITS_14, SSP_BITS_15,
 166         SSP_BITS_16, SSP_BITS_17, SSP_BITS_18,
 167         SSP_BITS_19, SSP_BITS_20, SSP_BITS_21,
 168         SSP_BITS_22, SSP_BITS_23, SSP_BITS_24,
 169         SSP_BITS_25, SSP_BITS_26, SSP_BITS_27,
 170         SSP_BITS_28, SSP_BITS_29, SSP_BITS_30,
 171         SSP_BITS_31, SSP_BITS_32
 172 };
 173
 174 /**
 175  * enum Microwire Wait State
 176  * @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit
 177  * @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit
 178  */
 179 enum ssp_microwire_wait_state {
 180         SSP_MWIRE_WAIT_ZERO,
 181         SSP_MWIRE_WAIT_ONE
 182 };
 183
 184 /**
 185  * enum ssp_duplex - whether Full/Half Duplex on microwire, only
 186  * available in the ST Micro variant.
 187  * @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
 188  *     SSPRXD not used
 189  * @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
 190  *     an input.
 191  */
 192 enum ssp_duplex {
 193         SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
 194         SSP_MICROWIRE_CHANNEL_HALF_DUPLEX
 195 };
 196
 197 /**
 198  * enum ssp_clkdelay - an optional clock delay on the feedback clock
 199  * only available in the ST Micro PL023 variant.
 200  * @SSP_FEEDBACK_CLK_DELAY_NONE: no delay, the data coming in from the
 201  * slave is sampled directly
 202  * @SSP_FEEDBACK_CLK_DELAY_1T: the incoming slave data is sampled with
 203  * a delay of T-dt
 204  * @SSP_FEEDBACK_CLK_DELAY_2T: dito with a delay if 2T-dt
 205  * @SSP_FEEDBACK_CLK_DELAY_3T: dito with a delay if 3T-dt
 206  * @SSP_FEEDBACK_CLK_DELAY_4T: dito with a delay if 4T-dt
 207  * @SSP_FEEDBACK_CLK_DELAY_5T: dito with a delay if 5T-dt
 208  * @SSP_FEEDBACK_CLK_DELAY_6T: dito with a delay if 6T-dt
 209  * @SSP_FEEDBACK_CLK_DELAY_7T: dito with a delay if 7T-dt
 210  */
 211 enum ssp_clkdelay {
 212         SSP_FEEDBACK_CLK_DELAY_NONE,
 213         SSP_FEEDBACK_CLK_DELAY_1T,
 214         SSP_FEEDBACK_CLK_DELAY_2T,
 215         SSP_FEEDBACK_CLK_DELAY_3T,
 216         SSP_FEEDBACK_CLK_DELAY_4T,
 217         SSP_FEEDBACK_CLK_DELAY_5T,
 218         SSP_FEEDBACK_CLK_DELAY_6T,
 219         SSP_FEEDBACK_CLK_DELAY_7T
 220 };
 221
 222 /**
 223  * CHIP select/deselect commands
 224  */
 225 enum ssp_chip_select {
 226         SSP_CHIP_SELECT,
 227         SSP_CHIP_DESELECT
 228 };
 229
 230
 231 /**
 232  * struct pl022_ssp_master - device.platform_data for SPI controller devices.
 233  * @num_chipselect: chipselects are used to distinguish individual
 234  *     SPI slaves, and are numbered from zero to num_chipselects - 1.
 235  *     each slave has a chipselect signal, but it's common that not
 236  *     every chipselect is connected to a slave.
 237  * @enable_dma: if true enables DMA driven transfers.
 238  */
 239 struct pl022_ssp_controller {
 240         u16 bus_id;
 241         u8 num_chipselect;
 242         u8 enable_dma:1;
 243 };
 244
 245 /**
 246  * struct ssp_config_chip - spi_board_info.controller_data for SPI
 247  * slave devices, copied to spi_device.controller_data.
 248  *
 249  * @lbm: used for test purpose to internally connect RX and TX
 250  * @iface: Interface type(Motorola, TI, Microwire, Universal)
 251  * @hierarchy: sets whether interface is master or slave
 252  * @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
 253  * @clk_freq: Tune freq parameters of SSP(when in master mode)
 254  * @endian_rx: Endianess of Data in Rx FIFO
 255  * @endian_tx: Endianess of Data in Tx FIFO
 256  * @data_size: Width of data element(4 to 32 bits)
 257  * @com_mode: communication mode: polling, Interrupt or DMA
 258  * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
 259  * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
 260  * @clk_phase: Motorola SPI interface Clock phase
 261  * @clk_pol: Motorola SPI interface Clock polarity
 262  * @ctrl_len: Microwire interface: Control length
 263  * @wait_state: Microwire interface: Wait state
 264  * @duplex: Microwire interface: Full/Half duplex
 265  * @clkdelay: on the PL023 variant, the delay in feeback clock cycles
 266  * before sampling the incoming line
 267  * @cs_control: function pointer to board-specific function to
 268  * assert/deassert I/O port to control HW generation of devices chip-select.
 269  * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
 270  * @dma_config: DMA configuration for SSP controller and peripheral
 271  */
 272 struct pl022_config_chip {
 273         struct device *dev;
 274         enum ssp_loopback lbm;
 275         enum ssp_interface iface;
 276         enum ssp_hierarchy hierarchy;
 277         bool slave_tx_disable;
 278         struct ssp_clock_params clk_freq;
 279         enum ssp_rx_endian endian_rx;
 280         enum ssp_tx_endian endian_tx;
 281         enum ssp_data_size data_size;
 282         enum ssp_mode com_mode;
 283         enum ssp_rx_level_trig rx_lev_trig;
 284         enum ssp_tx_level_trig tx_lev_trig;
 285         enum ssp_spi_clk_phase clk_phase;
 286         enum ssp_spi_clk_pol clk_pol;
 287         enum ssp_microwire_ctrl_len ctrl_len;
 288         enum ssp_microwire_wait_state wait_state;
 289         enum ssp_duplex duplex;
 290         enum ssp_clkdelay clkdelay;
 291         void (*cs_control) (u32 control);
 292 };
 293
 294 #endif /* _SSP_PL022_H */