release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/net/usb/cdc_subset.c

   1 /*
   2  * Simple "CDC Subset" USB Networking Links
   3  * Copyright (C) 2000-2005 by David Brownell
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  18  */
  19
  20 #include <linux/module.h>
  21 #include <linux/kmod.h>
  22 #include <linux/init.h>
  23 #include <linux/netdevice.h>
  24 #include <linux/etherdevice.h>
  25 #include <linux/ethtool.h>
  26 #include <linux/workqueue.h>
  27 #include <linux/mii.h>
  28 #include <linux/usb.h>
  29 #include <linux/usb/usbnet.h>
  30
  31
  32 /*
  33  * This supports simple USB network links that don't require any special
  34  * framing or hardware control operations.  The protocol used here is a
  35  * strict subset of CDC Ethernet, with three basic differences reflecting
  36  * the goal that almost any hardware should run it:
  37  *
  38  *  - Minimal runtime control:  one interface, no altsettings, and
  39  *    no vendor or class specific control requests.  If a device is
  40  *    configured, it is allowed to exchange packets with the host.
  41  *    Fancier models would mean not working on some hardware.
  42  *
  43  *  - Minimal manufacturing control:  no IEEE "Organizationally
  44  *    Unique ID" required, or an EEPROMs to store one.  Each host uses
  45  *    one random "locally assigned" Ethernet address instead, which can
  46  *    of course be overridden using standard tools like "ifconfig".
  47  *    (With 2^46 such addresses, same-net collisions are quite rare.)
  48  *
  49  *  - There is no additional framing data for USB.  Packets are written
  50  *    exactly as in CDC Ethernet, starting with an Ethernet header and
  51  *    terminated by a short packet.  However, the host will never send a
  52  *    zero length packet; some systems can't handle those robustly.
  53  *
  54  * Anything that can transmit and receive USB bulk packets can implement
  55  * this protocol.  That includes both smart peripherals and quite a lot
  56  * of "host-to-host" USB cables (which embed two devices back-to-back).
  57  *
  58  * Note that although Linux may use many of those host-to-host links
  59  * with this "cdc_subset" framing, that doesn't mean there may not be a
  60  * better approach.  Handling the "other end unplugs/replugs" scenario
  61  * well tends to require chip-specific vendor requests.  Also, Windows
  62  * peers at the other end of host-to-host cables may expect their own
  63  * framing to be used rather than this "cdc_subset" model.
  64  */
  65
  66 #if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX)
  67 /* PDA style devices are always connected if present */
  68 static int always_connected (struct usbnet *dev)
  69 {
  70         return 0;
  71 }
  72 #endif
  73
  74 #ifdef  CONFIG_USB_ALI_M5632
  75 #define HAVE_HARDWARE
  76
  77 /*-------------------------------------------------------------------------
  78  *
  79  * ALi M5632 driver ... does high speed
  80  *
  81  * NOTE that the MS-Windows drivers for this chip use some funky and
  82  * (naturally) undocumented 7-byte prefix to each packet, so this is a
  83  * case where we don't currently interoperate.  Also, once you unplug
  84  * one end of the cable, you need to replug the other end too ... since
  85  * chip docs are unavailable, there's no way to reset the relevant state
  86  * short of a power cycle.
  87  *
  88  *-------------------------------------------------------------------------*/
  89
  90 static const struct driver_info ali_m5632_info = {
  91         .description =  "ALi M5632",
  92 };
  93
  94 #endif
  95
  96 \f
  97 #ifdef  CONFIG_USB_AN2720
  98 #define HAVE_HARDWARE
  99
 100 /*-------------------------------------------------------------------------
 101  *
 102  * AnchorChips 2720 driver ... http://www.cypress.com
 103  *
 104  * This doesn't seem to have a way to detect whether the peer is
 105  * connected, or need any reset handshaking.  It's got pretty big
 106  * internal buffers (handles most of a frame's worth of data).
 107  * Chip data sheets don't describe any vendor control messages.
 108  *
 109  *-------------------------------------------------------------------------*/
 110
 111 static const struct driver_info an2720_info = {
 112         .description =  "AnchorChips/Cypress 2720",
 113         // no reset available!
 114         // no check_connect available!
 115
 116         .in = 2, .out = 2,              // direction distinguishes these
 117 };
 118
 119 #endif  /* CONFIG_USB_AN2720 */
 120
 121 \f
 122 #ifdef  CONFIG_USB_BELKIN
 123 #define HAVE_HARDWARE
 124
 125 /*-------------------------------------------------------------------------
 126  *
 127  * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller
 128  *
 129  * ... also two eTEK designs, including one sold as "Advance USBNET"
 130  *
 131  *-------------------------------------------------------------------------*/
 132
 133 static const struct driver_info belkin_info = {
 134         .description =  "Belkin, eTEK, or compatible",
 135 };
 136
 137 #endif  /* CONFIG_USB_BELKIN */
 138
 139
 140 \f
 141 #ifdef  CONFIG_USB_EPSON2888
 142 #define HAVE_HARDWARE
 143
 144 /*-------------------------------------------------------------------------
 145  *
 146  * EPSON USB clients
 147  *
 148  * This is the same idea as Linux PDAs (below) except the firmware in the
 149  * device might not be Tux-powered.  Epson provides reference firmware that
 150  * implements this interface.  Product developers can reuse or modify that
 151  * code, such as by using their own product and vendor codes.
 152  *
 153  * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
 154  *
 155  *-------------------------------------------------------------------------*/
 156
 157 static const struct driver_info epson2888_info = {
 158         .description =  "Epson USB Device",
 159         .check_connect = always_connected,
 160
 161         .in = 4, .out = 3,
 162 };
 163
 164 #endif  /* CONFIG_USB_EPSON2888 */
 165
 166 \f
 167 /*-------------------------------------------------------------------------
 168  *
 169  * info from Jonathan McDowell <noodles@earth.li>
 170  *
 171  *-------------------------------------------------------------------------*/
 172 #ifdef CONFIG_USB_KC2190
 173 #define HAVE_HARDWARE
 174 static const struct driver_info kc2190_info = {
 175         .description =  "KC Technology KC-190",
 176 };
 177 #endif /* CONFIG_USB_KC2190 */
 178
 179 \f
 180 #ifdef  CONFIG_USB_ARMLINUX
 181 #define HAVE_HARDWARE
 182
 183 /*-------------------------------------------------------------------------
 184  *
 185  * Intel's SA-1100 chip integrates basic USB support, and is used
 186  * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
 187  * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
 188  * network using minimal USB framing data.
 189  *
 190  * This describes the driver currently in standard ARM Linux kernels.
 191  * The Zaurus uses a different driver (see later).
 192  *
 193  * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
 194  * and different USB endpoint numbering than the SA1100 devices.  The
 195  * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
 196  * so we rely on the endpoint descriptors.
 197  *
 198  *-------------------------------------------------------------------------*/
 199
 200 static const struct driver_info linuxdev_info = {
 201         .description =  "Linux Device",
 202         .check_connect = always_connected,
 203 };
 204
 205 static const struct driver_info yopy_info = {
 206         .description =  "Yopy",
 207         .check_connect = always_connected,
 208 };
 209
 210 static const struct driver_info blob_info = {
 211         .description =  "Boot Loader OBject",
 212         .check_connect = always_connected,
 213 };
 214
 215 #endif  /* CONFIG_USB_ARMLINUX */
 216
 217 \f
 218 /*-------------------------------------------------------------------------*/
 219
 220 #ifndef HAVE_HARDWARE
 221 #warning You need to configure some hardware for this driver
 222 #endif
 223
 224 /*
 225  * chip vendor names won't normally be on the cables, and
 226  * may not be on the device.
 227  */
 228
 229 static const struct usb_device_id       products [] = {
 230
 231 #ifdef  CONFIG_USB_ALI_M5632
 232 {
 233         USB_DEVICE (0x0402, 0x5632),    // ALi defaults
 234         .driver_info =  (unsigned long) &ali_m5632_info,
 235 },
 236 {
 237         USB_DEVICE (0x182d,0x207c),     // SiteCom CN-124
 238         .driver_info =  (unsigned long) &ali_m5632_info,
 239 },
 240 #endif
 241
 242 #ifdef  CONFIG_USB_AN2720
 243 {
 244         USB_DEVICE (0x0547, 0x2720),    // AnchorChips defaults
 245         .driver_info =  (unsigned long) &an2720_info,
 246 }, {
 247         USB_DEVICE (0x0547, 0x2727),    // Xircom PGUNET
 248         .driver_info =  (unsigned long) &an2720_info,
 249 },
 250 #endif
 251
 252 #ifdef  CONFIG_USB_BELKIN
 253 {
 254         USB_DEVICE (0x050d, 0x0004),    // Belkin
 255         .driver_info =  (unsigned long) &belkin_info,
 256 }, {
 257         USB_DEVICE (0x056c, 0x8100),    // eTEK
 258         .driver_info =  (unsigned long) &belkin_info,
 259 }, {
 260         USB_DEVICE (0x0525, 0x9901),    // Advance USBNET (eTEK)
 261         .driver_info =  (unsigned long) &belkin_info,
 262 },
 263 #endif
 264
 265 #ifdef  CONFIG_USB_EPSON2888
 266 {
 267         USB_DEVICE (0x0525, 0x2888),    // EPSON USB client
 268         .driver_info    = (unsigned long) &epson2888_info,
 269 },
 270 #endif
 271
 272 #ifdef CONFIG_USB_KC2190
 273 {
 274         USB_DEVICE (0x050f, 0x0190),    // KC-190
 275         .driver_info =  (unsigned long) &kc2190_info,
 276 },
 277 #endif
 278
 279 #ifdef  CONFIG_USB_ARMLINUX
 280 /*
 281  * SA-1100 using standard ARM Linux kernels, or compatible.
 282  * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
 283  * The sa-1100 "usb-eth" driver handles the basic framing.
 284  *
 285  * PXA25x or PXA210 ...  these use a "usb-eth" driver much like
 286  * the sa1100 one, but hardware uses different endpoint numbers.
 287  *
 288  * Or the Linux "Ethernet" gadget on hardware that can't talk
 289  * CDC Ethernet (e.g., no altsettings), in either of two modes:
 290  *  - acting just like the old "usb-eth" firmware, though
 291  *    the implementation is different
 292  *  - supporting RNDIS as the first/default configuration for
 293  *    MS-Windows interop; Linux needs to use the other config
 294  */
 295 {
 296         // 1183 = 0x049F, both used as hex values?
 297         // Compaq "Itsy" vendor/product id
 298         USB_DEVICE (0x049F, 0x505A),    // usb-eth, or compatible
 299         .driver_info =  (unsigned long) &linuxdev_info,
 300 }, {
 301         USB_DEVICE (0x0E7E, 0x1001),    // G.Mate "Yopy"
 302         .driver_info =  (unsigned long) &yopy_info,
 303 }, {
 304         USB_DEVICE (0x8086, 0x07d3),    // "blob" bootloader
 305         .driver_info =  (unsigned long) &blob_info,
 306 }, {
 307         USB_DEVICE (0x1286, 0x8001),    // "blob" bootloader
 308         .driver_info =  (unsigned long) &blob_info,
 309 }, {
 310         // Linux Ethernet/RNDIS gadget, mostly on PXA, second config
 311         // e.g. Gumstix, current OpenZaurus, ... or anything else
 312         // that just enables this gadget option.
 313         USB_DEVICE (0x0525, 0xa4a2),
 314         .driver_info =  (unsigned long) &linuxdev_info,
 315 },
 316 #endif
 317
 318         { },            // END
 319 };
 320 MODULE_DEVICE_TABLE(usb, products);
 321
 322 /*-------------------------------------------------------------------------*/
 323
 324 static struct usb_driver cdc_subset_driver = {
 325         .name =         "cdc_subset",
 326         .probe =        usbnet_probe,
 327         .suspend =      usbnet_suspend,
 328         .resume =       usbnet_resume,
 329         .disconnect =   usbnet_disconnect,
 330         .id_table =     products,
 331 };
 332
 333 static int __init cdc_subset_init(void)
 334 {
 335         return usb_register(&cdc_subset_driver);
 336 }
 337 module_init(cdc_subset_init);
 338
 339 static void __exit cdc_subset_exit(void)
 340 {
 341         usb_deregister(&cdc_subset_driver);
 342 }
 343 module_exit(cdc_subset_exit);
 344
 345 MODULE_AUTHOR("David Brownell");
 346 MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links");
 347 MODULE_LICENSE("GPL");