release/src-rt-6.x.4708/linux/linux-2.6.36/arch/powerpc/sysdev/dart_iommu.c

   1 /*
   2  * arch/powerpc/sysdev/dart_iommu.c
   3  *
   4  * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
   5  * Copyright (C) 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>,
   6  *                    IBM Corporation
   7  *
   8  * Based on pSeries_iommu.c:
   9  * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
  10  * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
  11  *
  12  * Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu.
  13  *
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, write to the Free Software
  27  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  28  */
  29
  30 #include <linux/init.h>
  31 #include <linux/types.h>
  32 #include <linux/mm.h>
  33 #include <linux/spinlock.h>
  34 #include <linux/string.h>
  35 #include <linux/pci.h>
  36 #include <linux/dma-mapping.h>
  37 #include <linux/vmalloc.h>
  38 #include <linux/suspend.h>
  39 #include <linux/memblock.h>
  40 #include <linux/gfp.h>
  41 #include <asm/io.h>
  42 #include <asm/prom.h>
  43 #include <asm/iommu.h>
  44 #include <asm/pci-bridge.h>
  45 #include <asm/machdep.h>
  46 #include <asm/abs_addr.h>
  47 #include <asm/cacheflush.h>
  48 #include <asm/ppc-pci.h>
  49
  50 #include "dart.h"
  51
  52 /* Physical base address and size of the DART table */
  53 unsigned long dart_tablebase; /* exported to htab_initialize */
  54 static unsigned long dart_tablesize;
  55
  56 /* Virtual base address of the DART table */
  57 static u32 *dart_vbase;
  58 #ifdef CONFIG_PM
  59 static u32 *dart_copy;
  60 #endif
  61
  62 /* Mapped base address for the dart */
  63 static unsigned int __iomem *dart;
  64
  65 /* Dummy val that entries are set to when unused */
  66 static unsigned int dart_emptyval;
  67
  68 static struct iommu_table iommu_table_dart;
  69 static int iommu_table_dart_inited;
  70 static int dart_dirty;
  71 static int dart_is_u4;
  72
  73 #define DBG(...)
  74
  75 static inline void dart_tlb_invalidate_all(void)
  76 {
  77         unsigned long l = 0;
  78         unsigned int reg, inv_bit;
  79         unsigned long limit;
  80
  81         DBG("dart: flush\n");
  82
  83         /* To invalidate the DART, set the DARTCNTL_FLUSHTLB bit in the
  84          * control register and wait for it to clear.
  85          *
  86          * Gotcha: Sometimes, the DART won't detect that the bit gets
  87          * set. If so, clear it and set it again.
  88          */
  89
  90         limit = 0;
  91
  92         inv_bit = dart_is_u4 ? DART_CNTL_U4_FLUSHTLB : DART_CNTL_U3_FLUSHTLB;
  93 retry:
  94         l = 0;
  95         reg = DART_IN(DART_CNTL);
  96         reg |= inv_bit;
  97         DART_OUT(DART_CNTL, reg);
  98
  99         while ((DART_IN(DART_CNTL) & inv_bit) && l < (1L << limit))
 100                 l++;
 101         if (l == (1L << limit)) {
 102                 if (limit < 4) {
 103                         limit++;
 104                         reg = DART_IN(DART_CNTL);
 105                         reg &= ~inv_bit;
 106                         DART_OUT(DART_CNTL, reg);
 107                         goto retry;
 108                 } else
 109                         panic("DART: TLB did not flush after waiting a long "
 110                               "time. Buggy U3 ?");
 111         }
 112 }
 113
 114 static inline void dart_tlb_invalidate_one(unsigned long bus_rpn)
 115 {
 116         unsigned int reg;
 117         unsigned int l, limit;
 118
 119         reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE |
 120                 (bus_rpn & DART_CNTL_U4_IONE_MASK);
 121         DART_OUT(DART_CNTL, reg);
 122
 123         limit = 0;
 124 wait_more:
 125         l = 0;
 126         while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) {
 127                 rmb();
 128                 l++;
 129         }
 130
 131         if (l == (1L << limit)) {
 132                 if (limit < 4) {
 133                         limit++;
 134                         goto wait_more;
 135                 } else
 136                         panic("DART: TLB did not flush after waiting a long "
 137                               "time. Buggy U4 ?");
 138         }
 139 }
 140
 141 static void dart_flush(struct iommu_table *tbl)
 142 {
 143         mb();
 144         if (dart_dirty) {
 145                 dart_tlb_invalidate_all();
 146                 dart_dirty = 0;
 147         }
 148 }
 149
 150 static int dart_build(struct iommu_table *tbl, long index,
 151                        long npages, unsigned long uaddr,
 152                        enum dma_data_direction direction,
 153                        struct dma_attrs *attrs)
 154 {
 155         unsigned int *dp;
 156         unsigned int rpn;
 157         long l;
 158
 159         DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);
 160
 161         dp = ((unsigned int*)tbl->it_base) + index;
 162
 163         /* On U3, all memory is contiguous, so we can move this
 164          * out of the loop.
 165          */
 166         l = npages;
 167         while (l--) {
 168                 rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT;
 169
 170                 *(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
 171
 172                 uaddr += DART_PAGE_SIZE;
 173         }
 174
 175         /* make sure all updates have reached memory */
 176         mb();
 177         in_be32((unsigned __iomem *)dp);
 178         mb();
 179
 180         if (dart_is_u4) {
 181                 rpn = index;
 182                 while (npages--)
 183                         dart_tlb_invalidate_one(rpn++);
 184         } else {
 185                 dart_dirty = 1;
 186         }
 187         return 0;
 188 }
 189
 190
 191 static void dart_free(struct iommu_table *tbl, long index, long npages)
 192 {
 193         unsigned int *dp;
 194
 195         /* We don't worry about flushing the TLB cache. The only drawback of
 196          * not doing it is that we won't catch buggy device drivers doing
 197          * bad DMAs, but then no 32-bit architecture ever does either.
 198          */
 199
 200         DBG("dart: free at: %lx, %lx\n", index, npages);
 201
 202         dp  = ((unsigned int *)tbl->it_base) + index;
 203
 204         while (npages--)
 205                 *(dp++) = dart_emptyval;
 206 }
 207
 208
 209 static int __init dart_init(struct device_node *dart_node)
 210 {
 211         unsigned int i;
 212         unsigned long tmp, base, size;
 213         struct resource r;
 214
 215         if (dart_tablebase == 0 || dart_tablesize == 0) {
 216                 printk(KERN_INFO "DART: table not allocated, using "
 217                        "direct DMA\n");
 218                 return -ENODEV;
 219         }
 220
 221         if (of_address_to_resource(dart_node, 0, &r))
 222                 panic("DART: can't get register base ! ");
 223
 224         /* Make sure nothing from the DART range remains in the CPU cache
 225          * from a previous mapping that existed before the kernel took
 226          * over
 227          */
 228         flush_dcache_phys_range(dart_tablebase,
 229                                 dart_tablebase + dart_tablesize);
 230
 231         tmp = memblock_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
 232         dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
 233                                          DARTMAP_RPNMASK);
 234
 235         /* Map in DART registers */
 236         dart = ioremap(r.start, r.end - r.start + 1);
 237         if (dart == NULL)
 238                 panic("DART: Cannot map registers!");
 239
 240         /* Map in DART table */
 241         dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize);
 242
 243         /* Fill initial table */
 244         for (i = 0; i < dart_tablesize/4; i++)
 245                 dart_vbase[i] = dart_emptyval;
 246
 247         /* Initialize DART with table base and enable it. */
 248         base = dart_tablebase >> DART_PAGE_SHIFT;
 249         size = dart_tablesize >> DART_PAGE_SHIFT;
 250         if (dart_is_u4) {
 251                 size &= DART_SIZE_U4_SIZE_MASK;
 252                 DART_OUT(DART_BASE_U4, base);
 253                 DART_OUT(DART_SIZE_U4, size);
 254                 DART_OUT(DART_CNTL, DART_CNTL_U4_ENABLE);
 255         } else {
 256                 size &= DART_CNTL_U3_SIZE_MASK;
 257                 DART_OUT(DART_CNTL,
 258                          DART_CNTL_U3_ENABLE |
 259                          (base << DART_CNTL_U3_BASE_SHIFT) |
 260                          (size << DART_CNTL_U3_SIZE_SHIFT));
 261         }
 262
 263         /* Invalidate DART to get rid of possible stale TLBs */
 264         dart_tlb_invalidate_all();
 265
 266         printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n",
 267                dart_is_u4 ? "U4" : "U3");
 268
 269         return 0;
 270 }
 271
 272 static void iommu_table_dart_setup(void)
 273 {
 274         iommu_table_dart.it_busno = 0;
 275         iommu_table_dart.it_offset = 0;
 276         /* it_size is in number of entries */
 277         iommu_table_dart.it_size = dart_tablesize / sizeof(u32);
 278
 279         /* Initialize the common IOMMU code */
 280         iommu_table_dart.it_base = (unsigned long)dart_vbase;
 281         iommu_table_dart.it_index = 0;
 282         iommu_table_dart.it_blocksize = 1;
 283         iommu_init_table(&iommu_table_dart, -1);
 284
 285         /* Reserve the last page of the DART to avoid possible prefetch
 286          * past the DART mapped area
 287          */
 288         set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
 289 }
 290
 291 static void pci_dma_dev_setup_dart(struct pci_dev *dev)
 292 {
 293         /* We only have one iommu table on the mac for now, which makes
 294          * things simple. Setup all PCI devices to point to this table
 295          */
 296         set_iommu_table_base(&dev->dev, &iommu_table_dart);
 297 }
 298
 299 static void pci_dma_bus_setup_dart(struct pci_bus *bus)
 300 {
 301         struct device_node *dn;
 302
 303         if (!iommu_table_dart_inited) {
 304                 iommu_table_dart_inited = 1;
 305                 iommu_table_dart_setup();
 306         }
 307
 308         dn = pci_bus_to_OF_node(bus);
 309
 310         if (dn)
 311                 PCI_DN(dn)->iommu_table = &iommu_table_dart;
 312 }
 313
 314 void __init iommu_init_early_dart(void)
 315 {
 316         struct device_node *dn;
 317
 318         /* Find the DART in the device-tree */
 319         dn = of_find_compatible_node(NULL, "dart", "u3-dart");
 320         if (dn == NULL) {
 321                 dn = of_find_compatible_node(NULL, "dart", "u4-dart");
 322                 if (dn == NULL)
 323                         goto bail;
 324                 dart_is_u4 = 1;
 325         }
 326
 327         /* Setup low level TCE operations for the core IOMMU code */
 328         ppc_md.tce_build = dart_build;
 329         ppc_md.tce_free  = dart_free;
 330         ppc_md.tce_flush = dart_flush;
 331
 332         /* Initialize the DART HW */
 333         if (dart_init(dn) == 0) {
 334                 ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_dart;
 335                 ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_dart;
 336
 337                 /* Setup pci_dma ops */
 338                 set_pci_dma_ops(&dma_iommu_ops);
 339                 return;
 340         }
 341
 342  bail:
 343         /* If init failed, use direct iommu and null setup functions */
 344         ppc_md.pci_dma_dev_setup = NULL;
 345         ppc_md.pci_dma_bus_setup = NULL;
 346
 347         /* Setup pci_dma ops */
 348         set_pci_dma_ops(&dma_direct_ops);
 349 }
 350
 351 #ifdef CONFIG_PM
 352 static void iommu_dart_save(void)
 353 {
 354         memcpy(dart_copy, dart_vbase, 2*1024*1024);
 355 }
 356
 357 static void iommu_dart_restore(void)
 358 {
 359         memcpy(dart_vbase, dart_copy, 2*1024*1024);
 360         dart_tlb_invalidate_all();
 361 }
 362
 363 static int __init iommu_init_late_dart(void)
 364 {
 365         unsigned long tbasepfn;
 366         struct page *p;
 367
 368         /* if no dart table exists then we won't need to save it
 369          * and the area has also not been reserved */
 370         if (!dart_tablebase)
 371                 return 0;
 372
 373         tbasepfn = __pa(dart_tablebase) >> PAGE_SHIFT;
 374         register_nosave_region_late(tbasepfn,
 375                                     tbasepfn + ((1<<24) >> PAGE_SHIFT));
 376
 377         /* For suspend we need to copy the dart contents because
 378          * it is not part of the regular mapping (see above) and
 379          * thus not saved automatically. The memory for this copy
 380          * must be allocated early because we need 2 MB. */
 381         p = alloc_pages(GFP_KERNEL, 21 - PAGE_SHIFT);
 382         BUG_ON(!p);
 383         dart_copy = page_address(p);
 384
 385         ppc_md.iommu_save = iommu_dart_save;
 386         ppc_md.iommu_restore = iommu_dart_restore;
 387
 388         return 0;
 389 }
 390
 391 late_initcall(iommu_init_late_dart);
 392 #endif
 393
 394 void __init alloc_dart_table(void)
 395 {
 396         /* Only reserve DART space if machine has more than 1GB of RAM
 397          * or if requested with iommu=on on cmdline.
 398          *
 399          * 1GB of RAM is picked as limit because some default devices
 400          * (i.e. Airport Extreme) have 30 bit address range limits.
 401          */
 402
 403         if (iommu_is_off)
 404                 return;
 405
 406         if (!iommu_force_on && memblock_end_of_DRAM() <= 0x40000000ull)
 407                 return;
 408
 409         /* 512 pages (2MB) is max DART tablesize. */
 410         dart_tablesize = 1UL << 21;
 411         /* 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we
 412          * will blow up an entire large page anyway in the kernel mapping
 413          */
 414         dart_tablebase = (unsigned long)
 415                 abs_to_virt(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
 416
 417         printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase);
 418 }