release/src-rt/include/sbconfig.h

   1 /*
   2  * Broadcom SiliconBackplane hardware register definitions.
   3  *
   4  * Copyright (C) 2009, Broadcom Corporation
   5  * All Rights Reserved.
   6  *
   7  * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8  * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9  * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10  * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11  *
  12  * $Id: sbconfig.h,v 13.70 2008/03/28 19:17:04 Exp $
  13  */
  14
  15 #ifndef _SBCONFIG_H
  16 #define _SBCONFIG_H
  17
  18 /* cpp contortions to concatenate w/arg prescan */
  19 #ifndef PAD
  20 #define _PADLINE(line)  pad ## line
  21 #define _XSTR(line)     _PADLINE(line)
  22 #define PAD             _XSTR(__LINE__)
  23 #endif
  24
  25 /* enumeration in SB is based on the premise that cores are contiguos in the
  26  * enumeration space.
  27  */
  28 #define SB_BUS_SIZE             0x10000         /* Each bus gets 64Kbytes for cores */
  29 #define SB_BUS_BASE(b)          (SI_ENUM_BASE + (b) * SB_BUS_SIZE)
  30 #define SB_BUS_MAXCORES         (SB_BUS_SIZE / SI_CORE_SIZE)    /* Max cores per bus */
  31
  32 /*
  33  * Sonics Configuration Space Registers.
  34  */
  35 #define SBCONFIGOFF             0xf00           /* core sbconfig regs are top 256bytes of regs */
  36 #define SBCONFIGSIZE            256             /* sizeof (sbconfig_t) */
  37
  38 #define SBIPSFLAG               0x08
  39 #define SBTPSFLAG               0x18
  40 #define SBTMERRLOGA             0x48            /* sonics >= 2.3 */
  41 #define SBTMERRLOG              0x50            /* sonics >= 2.3 */
  42 #define SBADMATCH3              0x60
  43 #define SBADMATCH2              0x68
  44 #define SBADMATCH1              0x70
  45 #define SBIMSTATE               0x90
  46 #define SBINTVEC                0x94
  47 #define SBTMSTATELOW            0x98
  48 #define SBTMSTATEHIGH           0x9c
  49 #define SBBWA0                  0xa0
  50 #define SBIMCONFIGLOW           0xa8
  51 #define SBIMCONFIGHIGH          0xac
  52 #define SBADMATCH0              0xb0
  53 #define SBTMCONFIGLOW           0xb8
  54 #define SBTMCONFIGHIGH          0xbc
  55 #define SBBCONFIG               0xc0
  56 #define SBBSTATE                0xc8
  57 #define SBACTCNFG               0xd8
  58 #define SBFLAGST                0xe8
  59 #define SBIDLOW                 0xf8
  60 #define SBIDHIGH                0xfc
  61
  62 /* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have
  63  * a few registers *below* that line. I think it would be very confusing to try
  64  * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here,
  65  */
  66
  67 #define SBIMERRLOGA             0xea8
  68 #define SBIMERRLOG              0xeb0
  69 #define SBTMPORTCONNID0         0xed8
  70 #define SBTMPORTLOCK0           0xef8
  71
  72 #ifndef _LANGUAGE_ASSEMBLY
  73
  74 typedef volatile struct _sbconfig {
  75         uint32  PAD[2];
  76         uint32  sbipsflag;              /* initiator port ocp slave flag */
  77         uint32  PAD[3];
  78         uint32  sbtpsflag;              /* target port ocp slave flag */
  79         uint32  PAD[11];
  80         uint32  sbtmerrloga;            /* (sonics >= 2.3) */
  81         uint32  PAD;
  82         uint32  sbtmerrlog;             /* (sonics >= 2.3) */
  83         uint32  PAD[3];
  84         uint32  sbadmatch3;             /* address match3 */
  85         uint32  PAD;
  86         uint32  sbadmatch2;             /* address match2 */
  87         uint32  PAD;
  88         uint32  sbadmatch1;             /* address match1 */
  89         uint32  PAD[7];
  90         uint32  sbimstate;              /* initiator agent state */
  91         uint32  sbintvec;               /* interrupt mask */
  92         uint32  sbtmstatelow;           /* target state */
  93         uint32  sbtmstatehigh;          /* target state */
  94         uint32  sbbwa0;                 /* bandwidth allocation table0 */
  95         uint32  PAD;
  96         uint32  sbimconfiglow;          /* initiator configuration */
  97         uint32  sbimconfighigh;         /* initiator configuration */
  98         uint32  sbadmatch0;             /* address match0 */
  99         uint32  PAD;
 100         uint32  sbtmconfiglow;          /* target configuration */
 101         uint32  sbtmconfighigh;         /* target configuration */
 102         uint32  sbbconfig;              /* broadcast configuration */
 103         uint32  PAD;
 104         uint32  sbbstate;               /* broadcast state */
 105         uint32  PAD[3];
 106         uint32  sbactcnfg;              /* activate configuration */
 107         uint32  PAD[3];
 108         uint32  sbflagst;               /* current sbflags */
 109         uint32  PAD[3];
 110         uint32  sbidlow;                /* identification */
 111         uint32  sbidhigh;               /* identification */
 112 } sbconfig_t;
 113
 114 #endif /* _LANGUAGE_ASSEMBLY */
 115
 116 /* sbipsflag */
 117 #define SBIPS_INT1_MASK         0x3f            /* which sbflags get routed to mips interrupt 1 */
 118 #define SBIPS_INT1_SHIFT        0
 119 #define SBIPS_INT2_MASK         0x3f00          /* which sbflags get routed to mips interrupt 2 */
 120 #define SBIPS_INT2_SHIFT        8
 121 #define SBIPS_INT3_MASK         0x3f0000        /* which sbflags get routed to mips interrupt 3 */
 122 #define SBIPS_INT3_SHIFT        16
 123 #define SBIPS_INT4_MASK         0x3f000000      /* which sbflags get routed to mips interrupt 4 */
 124 #define SBIPS_INT4_SHIFT        24
 125
 126 /* sbtpsflag */
 127 #define SBTPS_NUM0_MASK         0x3f            /* interrupt sbFlag # generated by this core */
 128 #define SBTPS_F0EN0             0x40            /* interrupt is always sent on the backplane */
 129
 130 /* sbtmerrlog */
 131 #define SBTMEL_CM               0x00000007      /* command */
 132 #define SBTMEL_CI               0x0000ff00      /* connection id */
 133 #define SBTMEL_EC               0x0f000000      /* error code */
 134 #define SBTMEL_ME               0x80000000      /* multiple error */
 135
 136 /* sbimstate */
 137 #define SBIM_PC                 0xf             /* pipecount */
 138 #define SBIM_AP_MASK            0x30            /* arbitration policy */
 139 #define SBIM_AP_BOTH            0x00            /* use both timeslaces and token */
 140 #define SBIM_AP_TS              0x10            /* use timesliaces only */
 141 #define SBIM_AP_TK              0x20            /* use token only */
 142 #define SBIM_AP_RSV             0x30            /* reserved */
 143 #define SBIM_IBE                0x20000         /* inbanderror */
 144 #define SBIM_TO                 0x40000         /* timeout */
 145 #define SBIM_BY                 0x01800000      /* busy (sonics >= 2.3) */
 146 #define SBIM_RJ                 0x02000000      /* reject (sonics >= 2.3) */
 147
 148 /* sbtmstatelow */
 149 #define SBTML_RESET             0x0001          /* reset */
 150 #define SBTML_REJ_MASK          0x0006          /* reject field */
 151 #define SBTML_REJ               0x0002          /* reject */
 152 #define SBTML_TMPREJ            0x0004          /* temporary reject, for error recovery */
 153
 154 #define SBTML_SICF_SHIFT        16              /* Shift to locate the SI control flags in sbtml */
 155
 156 /* sbtmstatehigh */
 157 #define SBTMH_SERR              0x0001          /* serror */
 158 #define SBTMH_INT               0x0002          /* interrupt */
 159 #define SBTMH_BUSY              0x0004          /* busy */
 160 #define SBTMH_TO                0x0020          /* timeout (sonics >= 2.3) */
 161
 162 #define SBTMH_SISF_SHIFT        16              /* Shift to locate the SI status flags in sbtmh */
 163
 164 /* sbbwa0 */
 165 #define SBBWA_TAB0_MASK         0xffff          /* lookup table 0 */
 166 #define SBBWA_TAB1_MASK         0xffff          /* lookup table 1 */
 167 #define SBBWA_TAB1_SHIFT        16
 168
 169 /* sbimconfiglow */
 170 #define SBIMCL_STO_MASK         0x7             /* service timeout */
 171 #define SBIMCL_RTO_MASK         0x70            /* request timeout */
 172 #define SBIMCL_RTO_SHIFT        4
 173 #define SBIMCL_CID_MASK         0xff0000        /* connection id */
 174 #define SBIMCL_CID_SHIFT        16
 175
 176 /* sbimconfighigh */
 177 #define SBIMCH_IEM_MASK         0xc             /* inband error mode */
 178 #define SBIMCH_TEM_MASK         0x30            /* timeout error mode */
 179 #define SBIMCH_TEM_SHIFT        4
 180 #define SBIMCH_BEM_MASK         0xc0            /* bus error mode */
 181 #define SBIMCH_BEM_SHIFT        6
 182
 183 /* sbadmatch0 */
 184 #define SBAM_TYPE_MASK          0x3             /* address type */
 185 #define SBAM_AD64               0x4             /* reserved */
 186 #define SBAM_ADINT0_MASK        0xf8            /* type0 size */
 187 #define SBAM_ADINT0_SHIFT       3
 188 #define SBAM_ADINT1_MASK        0x1f8           /* type1 size */
 189 #define SBAM_ADINT1_SHIFT       3
 190 #define SBAM_ADINT2_MASK        0x1f8           /* type2 size */
 191 #define SBAM_ADINT2_SHIFT       3
 192 #define SBAM_ADEN               0x400           /* enable */
 193 #define SBAM_ADNEG              0x800           /* negative decode */
 194 #define SBAM_BASE0_MASK         0xffffff00      /* type0 base address */
 195 #define SBAM_BASE0_SHIFT        8
 196 #define SBAM_BASE1_MASK         0xfffff000      /* type1 base address for the core */
 197 #define SBAM_BASE1_SHIFT        12
 198 #define SBAM_BASE2_MASK         0xffff0000      /* type2 base address for the core */
 199 #define SBAM_BASE2_SHIFT        16
 200
 201 /* sbtmconfiglow */
 202 #define SBTMCL_CD_MASK          0xff            /* clock divide */
 203 #define SBTMCL_CO_MASK          0xf800          /* clock offset */
 204 #define SBTMCL_CO_SHIFT         11
 205 #define SBTMCL_IF_MASK          0xfc0000        /* interrupt flags */
 206 #define SBTMCL_IF_SHIFT         18
 207 #define SBTMCL_IM_MASK          0x3000000       /* interrupt mode */
 208 #define SBTMCL_IM_SHIFT         24
 209
 210 /* sbtmconfighigh */
 211 #define SBTMCH_BM_MASK          0x3             /* busy mode */
 212 #define SBTMCH_RM_MASK          0x3             /* retry mode */
 213 #define SBTMCH_RM_SHIFT         2
 214 #define SBTMCH_SM_MASK          0x30            /* stop mode */
 215 #define SBTMCH_SM_SHIFT         4
 216 #define SBTMCH_EM_MASK          0x300           /* sb error mode */
 217 #define SBTMCH_EM_SHIFT         8
 218 #define SBTMCH_IM_MASK          0xc00           /* int mode */
 219 #define SBTMCH_IM_SHIFT         10
 220
 221 /* sbbconfig */
 222 #define SBBC_LAT_MASK           0x3             /* sb latency */
 223 #define SBBC_MAX0_MASK          0xf0000         /* maxccntr0 */
 224 #define SBBC_MAX0_SHIFT         16
 225 #define SBBC_MAX1_MASK          0xf00000        /* maxccntr1 */
 226 #define SBBC_MAX1_SHIFT         20
 227
 228 /* sbbstate */
 229 #define SBBS_SRD                0x1             /* st reg disable */
 230 #define SBBS_HRD                0x2             /* hold reg disable */
 231
 232 /* sbidlow */
 233 #define SBIDL_CS_MASK           0x3             /* config space */
 234 #define SBIDL_AR_MASK           0x38            /* # address ranges supported */
 235 #define SBIDL_AR_SHIFT          3
 236 #define SBIDL_SYNCH             0x40            /* sync */
 237 #define SBIDL_INIT              0x80            /* initiator */
 238 #define SBIDL_MINLAT_MASK       0xf00           /* minimum backplane latency */
 239 #define SBIDL_MINLAT_SHIFT      8
 240 #define SBIDL_MAXLAT            0xf000          /* maximum backplane latency */
 241 #define SBIDL_MAXLAT_SHIFT      12
 242 #define SBIDL_FIRST             0x10000         /* this initiator is first */
 243 #define SBIDL_CW_MASK           0xc0000         /* cycle counter width */
 244 #define SBIDL_CW_SHIFT          18
 245 #define SBIDL_TP_MASK           0xf00000        /* target ports */
 246 #define SBIDL_TP_SHIFT          20
 247 #define SBIDL_IP_MASK           0xf000000       /* initiator ports */
 248 #define SBIDL_IP_SHIFT          24
 249 #define SBIDL_RV_MASK           0xf0000000      /* sonics backplane revision code */
 250 #define SBIDL_RV_SHIFT          28
 251 #define SBIDL_RV_2_2            0x00000000      /* version 2.2 or earlier */
 252 #define SBIDL_RV_2_3            0x10000000      /* version 2.3 */
 253
 254 /* sbidhigh */
 255 #define SBIDH_RC_MASK           0x000f          /* revision code */
 256 #define SBIDH_RCE_MASK          0x7000          /* revision code extension field */
 257 #define SBIDH_RCE_SHIFT         8
 258 #define SBCOREREV(sbidh) \
 259         ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
 260 #define SBIDH_CC_MASK           0x8ff0          /* core code */
 261 #define SBIDH_CC_SHIFT          4
 262 #define SBIDH_VC_MASK           0xffff0000      /* vendor code */
 263 #define SBIDH_VC_SHIFT          16
 264
 265 #define SB_COMMIT               0xfd8           /* update buffered registers value */
 266
 267 /* vendor codes */
 268 #define SB_VEND_BCM             0x4243          /* Broadcom's SB vendor code */
 269
 270 #endif  /* _SBCONFIG_H */