release/src-rt/include/proto/bcmevent.h

   1 /*
   2  * Broadcom Event  protocol definitions
   3  *
   4  * Copyright (C) 2009, Broadcom Corporation
   5  * All Rights Reserved.
   6  *
   7  * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8  * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9  * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10  * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11  *
  12  * Dependencies: proto/bcmeth.h
  13  *
  14  * $Id: bcmevent.h,v 9.35.2.6 2009/08/10 07:58:32 Exp $
  15  *
  16  */
  17
  18 /*
  19  * Broadcom Ethernet Events protocol defines
  20  *
  21  */
  22
  23 #ifndef _BCMEVENT_H_
  24 #define _BCMEVENT_H_
  25
  26 /* enable structure packing */
  27 #if defined(__GNUC__)
  28 #define PACKED  __attribute__((packed))
  29 #else
  30 #pragma pack(1)
  31 #define PACKED
  32 #endif /* defined(__GNUC__) */
  33
  34 #define BCM_EVENT_MSG_VERSION           1       /* wl_event_msg_t struct version */
  35 #define BCM_MSG_IFNAME_MAX              16      /* max length of interface name */
  36
  37 /* flags */
  38 #define WLC_EVENT_MSG_LINK              0x01    /* link is up */
  39 #define WLC_EVENT_MSG_FLUSHTXQ          0x02    /* flush tx queue on MIC error */
  40 #define WLC_EVENT_MSG_GROUP             0x04    /* group MIC error */
  41
  42 /* these fields are stored in network order */
  43 typedef struct
  44 {
  45         uint16  version;
  46         uint16  flags;                  /* see flags below */
  47         uint32  event_type;             /* Message (see below) */
  48         uint32  status;                 /* Status code (see below) */
  49         uint32  reason;                 /* Reason code (if applicable) */
  50         uint32  auth_type;              /* WLC_E_AUTH */
  51         uint32  datalen;                /* data buf */
  52         struct ether_addr       addr;   /* Station address (if applicable) */
  53         char    ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */
  54 } PACKED wl_event_msg_t;
  55
  56 /* used by driver msgs */
  57 typedef struct bcm_event {
  58         struct ether_header eth;
  59         bcmeth_hdr_t            bcm_hdr;
  60         wl_event_msg_t          event;
  61         /* data portion follows */
  62 } PACKED bcm_event_t;
  63
  64 #define BCM_MSG_LEN     (sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header))
  65
  66 /* Event messages */
  67 #define WLC_E_SET_SSID          0       /* indicates status of set SSID */
  68 #define WLC_E_JOIN              1       /* differentiates join IBSS from found (WLC_E_START) IBSS */
  69 #define WLC_E_START             2       /* STA founded an IBSS or AP started a BSS */
  70 #define WLC_E_AUTH              3       /* 802.11 AUTH request */
  71 #define WLC_E_AUTH_IND          4       /* 802.11 AUTH indication */
  72 #define WLC_E_DEAUTH            5       /* 802.11 DEAUTH request */
  73 #define WLC_E_DEAUTH_IND        6       /* 802.11 DEAUTH indication */
  74 #define WLC_E_ASSOC             7       /* 802.11 ASSOC request */
  75 #define WLC_E_ASSOC_IND         8       /* 802.11 ASSOC indication */
  76 #define WLC_E_REASSOC           9       /* 802.11 REASSOC request */
  77 #define WLC_E_REASSOC_IND       10      /* 802.11 REASSOC indication */
  78 #define WLC_E_DISASSOC          11      /* 802.11 DISASSOC request */
  79 #define WLC_E_DISASSOC_IND      12      /* 802.11 DISASSOC indication */
  80 #define WLC_E_QUIET_START       13      /* 802.11h Quiet period started */
  81 #define WLC_E_QUIET_END         14      /* 802.11h Quiet period ended */
  82 #define WLC_E_BEACON_RX         15      /* BEACONS received/lost indication */
  83 #define WLC_E_LINK              16      /* generic link indication */
  84 #define WLC_E_MIC_ERROR         17      /* TKIP MIC error occurred */
  85 #define WLC_E_NDIS_LINK         18      /* NDIS style link indication */
  86 #define WLC_E_ROAM              19      /* roam attempt occurred: indicate status & reason */
  87 #define WLC_E_TXFAIL            20      /* change in dot11FailedCount (txfail) */
  88 #define WLC_E_PMKID_CACHE       21      /* WPA2 pmkid cache indication */
  89 #define WLC_E_RETROGRADE_TSF    22      /* current AP's TSF value went backward */
  90 #define WLC_E_PRUNE             23      /* AP was pruned from join list for reason */
  91 #define WLC_E_AUTOAUTH          24      /* report AutoAuth table entry match for join attempt */
  92 #define WLC_E_EAPOL_MSG         25      /* Event encapsulating an EAPOL message */
  93 #define WLC_E_SCAN_COMPLETE     26      /* Scan results are ready or scan was aborted */
  94 #define WLC_E_ADDTS_IND         27      /* indicate to host addts fail/success */
  95 #define WLC_E_DELTS_IND         28      /* indicate to host delts fail/success */
  96 #define WLC_E_BCNSENT_IND       29      /* indicate to host of beacon transmit */
  97 #define WLC_E_BCNRX_MSG         30      /* Send the received beacon up to the host */
  98 #define WLC_E_BCNLOST_MSG       31      /* indicate to host loss of beacon */
  99 #define WLC_E_ROAM_PREP         32      /* before attempting to roam */
 100 #define WLC_E_PFN_NET_FOUND     33      /* PFN network found event */
 101 #define WLC_E_PFN_NET_LOST      34      /* PFN network lost event */
 102 #define WLC_E_RESET_COMPLETE    35
 103 #define WLC_E_JOIN_START        36
 104 #define WLC_E_ROAM_START        37
 105 #define WLC_E_ASSOC_START       38
 106 #define WLC_E_IBSS_ASSOC        39
 107 #define WLC_E_RADIO             40
 108 #define WLC_E_PSM_WATCHDOG      41      /* PSM microcode watchdog fired */
 109 #define WLC_E_PROBREQ_MSG       44      /* probe request received */
 110 #define WLC_E_SCAN_CONFIRM_IND  45
 111 #define WLC_E_PSK_SUP   46      /* WPA Handshake fail */
 112 #define WLC_E_COUNTRY_CODE_CHANGED 47
 113 #define WLC_E_EXCEEDED_MEDIUM_TIME 48   /* WMMAC excedded medium time */
 114 #define WLC_E_ICV_ERROR         49      /* WEP ICV error occurred */
 115 #define WLC_E_UNICAST_DECODE_ERROR 50 /* Unsupported unicast encrypted frame */
 116 #define WLC_E_MULTICAST_DECODE_ERROR 51 /* Unsupported multicast encrypted frame */
 117 #define WLC_E_EXTLOG_MSG        52
 118 #define WLC_E_LAST                      55      /* highest val + 1 for range checking */
 119
 120
 121 /* Event status codes */
 122 #define WLC_E_STATUS_SUCCESS            0       /* operation was successful */
 123 #define WLC_E_STATUS_FAIL               1       /* operation failed */
 124 #define WLC_E_STATUS_TIMEOUT            2       /* operation timed out */
 125 #define WLC_E_STATUS_NO_NETWORKS        3       /* failed due to no matching network found */
 126 #define WLC_E_STATUS_ABORT              4       /* operation was aborted */
 127 #define WLC_E_STATUS_NO_ACK             5       /* protocol failure: packet not ack'd */
 128 #define WLC_E_STATUS_UNSOLICITED        6       /* AUTH or ASSOC packet was unsolicited */
 129 #define WLC_E_STATUS_ATTEMPT            7       /* attempt to assoc to an auto auth configuration */
 130 #define WLC_E_STATUS_PARTIAL            8       /* scan results are incomplete */
 131 #define WLC_E_STATUS_NEWSCAN    9       /* scan aborted by another scan */
 132 #define WLC_E_STATUS_NEWASSOC   10      /* scan aborted due to assoc in progress */
 133 #define WLC_E_STATUS_11HQUIET   11      /* 802.11h quiet period started */
 134 #define WLC_E_STATUS_SUPPRESS   12      /* user disabled scanning (WLC_SET_SCANSUPPRESS) */
 135 #define WLC_E_STATUS_NOCHANS    13      /* no allowable channels to scan */
 136
 137 /* roam reason codes */
 138 #define WLC_E_REASON_INITIAL_ASSOC      0       /* initial assoc */
 139 #define WLC_E_REASON_LOW_RSSI           1       /* roamed due to low RSSI */
 140 #define WLC_E_REASON_DEAUTH             2       /* roamed due to DEAUTH indication */
 141 #define WLC_E_REASON_DISASSOC           3       /* roamed due to DISASSOC indication */
 142 #define WLC_E_REASON_BCNS_LOST          4       /* roamed due to lost beacons */
 143 #define WLC_E_REASON_MINTXRATE          9       /* roamed because at mintxrate for too long */
 144 #define WLC_E_REASON_TXFAIL             10      /* We can hear AP, but AP can't hear us */
 145
 146 /* Roam codes used primarily by CCX */
 147 #define WLC_E_REASON_FAST_ROAM_FAILED   5       /* roamed due to fast roam failure */
 148 #define WLC_E_REASON_DIRECTED_ROAM      6       /* roamed due to request by AP */
 149 #define WLC_E_REASON_TSPEC_REJECTED     7       /* roamed due to TSPEC rejection */
 150 #define WLC_E_REASON_BETTER_AP          8       /* roamed due to finding better AP */
 151
 152 /* prune reason codes */
 153 #define WLC_E_PRUNE_ENCR_MISMATCH       1       /* encryption mismatch */
 154 #define WLC_E_PRUNE_BCAST_BSSID         2       /* AP uses a broadcast BSSID */
 155 #define WLC_E_PRUNE_MAC_DENY            3       /* STA's MAC addr is in AP's MAC deny list */
 156 #define WLC_E_PRUNE_MAC_NA              4       /* STA's MAC addr is not in AP's MAC allow list */
 157 #define WLC_E_PRUNE_REG_PASSV           5       /* AP not allowed due to regulatory restriction */
 158 #define WLC_E_PRUNE_SPCT_MGMT           6       /* AP does not support STA locale spectrum mgmt */
 159 #define WLC_E_PRUNE_RADAR               7       /* AP is on a radar channel of STA locale */
 160 #define WLC_E_RSN_MISMATCH              8       /* STA does not support AP's RSN */
 161 #define WLC_E_PRUNE_NO_COMMON_RATES     9       /* No rates in common with AP */
 162 #define WLC_E_PRUNE_BASIC_RATES         10      /* STA does not support all basic rates of BSS */
 163 #define WLC_E_PRUNE_CIPHER_NA           12      /* BSS's cipher not supported */
 164 #define WLC_E_PRUNE_KNOWN_STA           13      /* AP is already known to us as a STA */
 165 #define WLC_E_PRUNE_WDS_PEER            15      /* AP is already known to us as a WDS peer */
 166 #define WLC_E_PRUNE_QBSS_LOAD           16      /* QBSS LOAD - AAC is too low */
 167 #define WLC_E_PRUNE_HOME_AP             17      /* prune home AP */
 168
 169 /* WPA failure reason codes carried in the WLC_E_PSK_SUP event */
 170 #define WLC_E_SUP_OTHER                         0       /* Other reason */
 171 #define WLC_E_SUP_DECRYPT_KEY_DATA      1       /* Decryption of key data failed */
 172 #define WLC_E_SUP_BAD_UCAST_WEP128      2       /* Illegal use of ucast WEP128 */
 173 #define WLC_E_SUP_BAD_UCAST_WEP40       3       /* Illegal use of ucast WEP40 */
 174 #define WLC_E_SUP_UNSUP_KEY_LEN         4       /* Unsupported key length */
 175 #define WLC_E_SUP_PW_KEY_CIPHER         5       /* Unicast cipher mismatch in pairwise key */
 176 #define WLC_E_SUP_MSG3_TOO_MANY_IE      6       /* WPA IE contains > 1 RSN IE in key msg 3 */
 177 #define WLC_E_SUP_MSG3_IE_MISMATCH      7       /* WPA IE mismatch in key message 3 */
 178 #define WLC_E_SUP_NO_INSTALL_FLAG       8       /* INSTALL flag unset in 4-way msg */
 179 #define WLC_E_SUP_MSG3_NO_GTK           9       /* encapsulated GTK missing from msg 3 */
 180 #define WLC_E_SUP_GRP_KEY_CIPHER        10      /* Multicast cipher mismatch in group key */
 181 #define WLC_E_SUP_GRP_MSG1_NO_GTK       11      /* encapsulated GTK missing from group msg 1 */
 182 #define WLC_E_SUP_GTK_DECRYPT_FAIL      12      /* GTK decrypt failure */
 183 #define WLC_E_SUP_SEND_FAIL                     13      /* message send failure */
 184 #define WLC_E_SUP_DEAUTH                        14      /* received FC_DEAUTH */
 185
 186 /* Reason codes for LINK */
 187 #define WLC_E_LINK_BCN_LOSS     1       /* Link down because of beacon loss */
 188 #define WLC_E_LINK_DISASSOC     2       /* Link down because of disassoc */
 189 #define WLC_E_LINK_ASSOC_REC    3       /* Link down because assoc recreate failed */
 190 #define WLC_E_LINK_BSSCFG_DIS   4       /* Link down due to bsscfg down */
 191
 192 #undef PACKED
 193 #if !defined(__GNUC__)
 194 #pragma pack()
 195 #endif /* PACKED */
 196
 197 #endif /* _BCMEVENT_H_ */