release/src/Makefile

   1
   2 #
   3 # Toplevel Makefile for the BCM947xx Linux Router release
   4 #
   5 # Copyright 2005, Broadcom Corporation
   6 # All Rights Reserved.
   7 #
   8 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   9 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
  10 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  11 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  12 #
  13 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  14 #
  15
  16 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  17
  18 # To rebuild everything and all configurations:
  19 #  make distclean
  20 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m
  21 # The 1st "whatever" would be the build number, the sub-whatever would
  22 #       be the update to the version.
  23 #
  24 # Example:
  25 # make V1=8516 V2="-jffs.1" a b c d m s
  26
  27 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  28
  29
  30
  31 export SRCBASE := $(shell pwd)
  32 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  33 PATH := $(RELEASEDIR)/tools:$(PATH)
  34 export TPROFILE := N
  35
  36 include ./target.mak
  37
  38 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  39 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  40 V1 ?= "--def"
  41 VPN ?= "VPN"
  42 NC ?="NOCAT"
  43 ifeq ($(CONFIG_LINUX26),y)
  44 ND = "K26"
  45 else
  46 ND = "ND"
  47 endif
  48 SNMP ?= "n"
  49 VLAN ?= "n"
  50 USERPPTP ?= "n"
  51
  52 ifeq ($(NVRAM_SIZE),)
  53 NVRAM_SIZE = 0
  54 endif
  55
  56 -include tomato_profile.mak
  57
  58 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  59 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  60 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  61 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  62 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  63 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  64 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  65
  66 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
  67 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
  68 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
  69 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
  70
  71 ifeq ($(CONFIG_LINUX26),y)
  72 mips_rev = $(if $(filter $(MIPS32),r2),MIPSR2,MIPSR1)
  73 KERN_SIZE_OPT ?= n
  74 else
  75 mips_rev =
  76 KERN_SIZE_OPT ?= y
  77 endif
  78
  79 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
  80
  81 tomato_ver:
  82         @echo ""
  83         @btools/uversion.pl --gen $(V1) $(mips_rev)$(beta)$(V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
  84
  85 ifeq ($(TOMATO_BUILD),)
  86
  87 all:
  88         $(MAKE) a
  89
  90 else
  91
  92 all: tomato_ver
  93         @echo ""
  94         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
  95
  96         @echo ""
  97         @echo ""
  98
  99         @-mkdir image
 100         @$(MAKE) -C router all
 101         @$(MAKE) -C router install
 102         @$(MAKE) -C btools
 103
 104         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx
 105         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 106 ifeq ($(WRT54),y)
 107 ifneq ($(MIPS32),r2)
 108         @rm -f image/tomato-WRT54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 109         @rm -f image/tomato-WRTSL54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 110         @rm -f image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 111 endif
 112 endif
 113 ifeq ($(LINKSYS_E),y)
 114         @rm -f image/tomato-E??00$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 115 endif
 116 ifeq ($(BELKIN),y)
 117 ifneq ($(NVRAM_SIZE),60)
 118         @rm -f image/tomato-F7D????$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 119         @rm -f image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 120 endif
 121 endif
 122         @echo "" >>fpkg.log
 123         @echo "***********************" `date` "************************" >>fpkg.log
 124         @cat router/shared/tomato_version >>fpkg.log
 125         @echo "" >>fpkg.log
 126         @cat router/target.info >>fpkg.log
 127 ifeq ($(WRT54),y)
 128 ifneq ($(MIPS32),r2)
 129         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 130                 -l W54G,image/tomato-WRT54G_WRT54GL$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 131                 -l W54S,image/tomato-WRT54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 132                 -l W54s,image/tomato-WRT54GSv4$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 133                 -l W54U,image/tomato-WRTSL54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 134                 -m 0x10577050,image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 135                 | tee -a fpkg.log
 136 endif
 137 endif
 138 ifeq ($(LINKSYS_E),y)
 139         # Linksys E-series images
 140         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 141                 -l 4200,image/tomato-E4200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 142                 -l 61XN,image/tomato-E3000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 143                 -l 32XN,image/tomato-E2000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 144                 | tee -a fpkg.log
 145 endif
 146 ifeq ($(BELKIN),y)
 147 ifneq ($(NVRAM_SIZE),60)
 148         # Create Belkin images
 149         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 150                 -b 0x20100322,image/tomato-F7D3301$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 151                 -b 0x20090928,image/tomato-F7D3302$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 152                 -b 0x20091006,image/tomato-F7D4302$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 153                 -b 0x00017116,image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 154                 | tee -a fpkg.log
 155 endif
 156 endif
 157         # Create generic TRX image
 158         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 159                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 160                 | tee -a fpkg.log
 161
 162         @cp fpkg.log image/fpkg-$(V1)$(mips_rev)$(beta)$(V2).log
 163         @echo ""
 164         @echo "-----------------"
 165         @echo `cat router/shared/tomato_version` " ready"
 166         @echo "-----------------"
 167 ifneq ($(NOVERSION),1)
 168         @cp router/shared/tomato_version router/shared/tomato_version_last
 169         @btools/uversion.pl --bump
 170 endif
 171 endif
 172
 173
 174
 175 clean:
 176         @touch router/.config
 177         @rm -f router/config_[a-z]
 178         @rm -f router/busybox/config_[a-z]
 179         @$(MAKE) -C router $@
 180         @-rmdir router/mipsel-uclibc
 181
 182 cleanimage:
 183         @rm -f fpkg.log
 184         @rm -fr image/*
 185         @rm -f router/.config
 186         @touch router/.config
 187         @-mkdir image
 188
 189 cleantools:
 190         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 191         @$(MAKE) -C btools clean
 192
 193 cleankernel:
 194         @cd $(LINUXDIR) && \
 195         mv .config save-config && \
 196         $(MAKE) distclean || true; \
 197         cp -p save-config .config || true
 198
 199 kernel:
 200         @$(MAKE) -C router kernel
 201         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 202
 203 distclean: clean cleanimage cleankernel cleantools
 204 ifneq ($(INSIDE_MAK),1)
 205         @$(MAKE) -C router $@ INSIDE_MAK=1
 206 endif
 207         mv router/busybox/.config busybox-saved-config || true
 208         @$(MAKE) -C router/busybox distclean
 209         @rm -f router/busybox/config_current
 210         @cp -p busybox-saved-config router/busybox/.config || true
 211         @cp -p router/busybox/.config  router/busybox/config_current || true
 212         @rm -f router/config_current
 213         @rm -f router/.config.cmd router/.config.old router/.config
 214         @rm -f router/libfoo_xref.txt
 215         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 216         @touch tomato_profile.mak
 217         @touch router/shared/tomato_profile.h
 218
 219
 220 prepk:
 221         @cd $(LINUXDIR) ; \
 222                 rm -f config_current ; \
 223                 ln -s config_base config_current ; \
 224                 cp -f config_current .config
 225         $(MAKE) -C $(LINUXDIR) oldconfig
 226 ifneq ($(CONFIG_LINUX26),y)
 227         $(MAKE) -C $(LINUXDIR) dep
 228 endif
 229
 230 what:
 231         @echo ""
 232         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 233         @echo ""
 234
 235
 236 # The methodology for making the different builds is to
 237 # copy the "base" config file to the "target" config file in
 238 # the appropriate directory, and then edit it by removing and
 239 # inserting the desired configuration lines.
 240 # You can't just delete the "whatever=y" line, you must have
 241 # a "...is not set" line, or the make oldconfig will stop and ask
 242 # what to do.
 243
 244 # Options for "make bin" :
 245 # BUILD_DESC (Std|Lite|Ext|...)
 246 # MIPS32 (r2|r1)
 247 # KERN_SIZE_OPT
 248 # USB ("USB"|"")
 249 # JFFSv1 | NO_JFFS
 250 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT
 251 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM
 252 # NOCAT
 253 # SNMP
 254 # USERPPTP
 255 # VLAN
 256
 257 define RouterOptions
 258         @( \
 259         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 260                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 261                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 262         fi; \
 263         sed -i "/TCONFIG_EMF/d" $(1); \
 264         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 265                 if [ "$(SLIM)" = "y" ]; then \
 266                         echo "# TCONFIG_EMF is not set" >>$(1); \
 267                 else \
 268                         echo "TCONFIG_EMF=y" >>$(1); \
 269                 fi; \
 270         else \
 271                 echo "# TCONFIG_EMF is not set" >>$(1); \
 272         fi; \
 273         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 274         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 275                 if [ "$(JFFSv1)" = "y" ]; then \
 276                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 277                 else \
 278                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 279                 fi; \
 280         else \
 281                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 282         fi; \
 283         if [ "$(USB)" = "USB" ]; then \
 284                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 285                 echo "TCONFIG_USB=y" >>$(1); \
 286                 if [ "$(USBEXTRAS)" = "y" ]; then \
 287                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 288                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 289                 fi; \
 290                 if [ "$(NTFS)" = "y" ]; then \
 291                         sed -i "/TCONFIG_NTFS/d" $(1); \
 292                         echo "TCONFIG_NTFS=y" >>$(1); \
 293                 fi; \
 294                 if [ "$(MEDIASRV)" = "y" ]; then \
 295                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 296                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 297                 fi; \
 298         else \
 299                 sed -i "/TCONFIG_USB=y/d" $(1); \
 300                 echo "# TCONFIG_USB is not set" >>$(1); \
 301         fi; \
 302         if [ "$(NO_SAMBA)" = "y" ]; then \
 303                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 304                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 305         fi; \
 306         if [ "$(NO_ZEBRA)" = "y" ]; then \
 307                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 308                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 309         fi; \
 310         if [ "$(NO_JFFS)" = "y" ]; then \
 311                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 312                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 313                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 314                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 315         fi; \
 316         if [ "$(NO_CIFS)" = "y" ]; then \
 317                 sed -i "/TCONFIG_CIFS/d" $(1); \
 318                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 319         fi; \
 320         if [ "$(NO_SSH)" = "y" ]; then \
 321                 sed -i "/TCONFIG_SSH/d" $(1); \
 322                 echo "# TCONFIG_SSH is not set" >>$(1); \
 323         fi; \
 324         if [ "$(NO_HTTPS)" = "y" ]; then \
 325                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 326                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 327         fi; \
 328         if [ "$(NO_XXTP)" = "y" ]; then \
 329                 sed -i "/TCONFIG_L2TP/d" $(1); \
 330                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 331                 sed -i "/TCONFIG_PPTP/d" $(1); \
 332                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 333         fi; \
 334         if [ "$(NO_LIBOPT)" = "y" ]; then \
 335                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 336                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 337         fi; \
 338         if [ "$(EBTABLES)" = "y" ]; then \
 339                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 340                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 341         fi; \
 342         if [ "$(IPV6SUPP)" = "y" ]; then \
 343                 sed -i "/TCONFIG_IPV6/d" $(1); \
 344                 echo "TCONFIG_IPV6=y" >>$(1); \
 345         fi; \
 346         if [ "$(NOCAT)" = "y" ]; then \
 347                 sed -i "/TCONFIG_NOCAT/d" $(1); \
 348                 echo "TCONFIG_NOCAT=y" >>$(1); \
 349         fi; \
 350         if [ "$(OPENVPN)" = "y" ]; then \
 351                 sed -i "/TCONFIG_LZO/d" $(1); \
 352                 echo "TCONFIG_LZO=y" >>$(1); \
 353                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 354                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 355                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 356                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 357                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 358                 fi; \
 359         fi; \
 360         if [ "$(SNMP)" = "y" ]; then \
 361                 sed -i "/TCONFIG_SNMP/d" $(1); \
 362                 echo "TCONFIG_SNMP=y" >>$(1); \
 363         fi; \
 364         if [ "$(USERPPTP)" = "y" ]; then \
 365                 sed -i "/TCONFIG_USERPPTP/d" $(1); \
 366                 echo "TCONFIG_USERPPTP=y" >>$(1); \
 367         fi; \
 368         if [ "$(VLAN)" = "y" ]; then \
 369                 sed -i "/TCONFIG_VLAN/d" $(1); \
 370                 echo "TCONFIG_VLAN=y" >>$(1); \
 371         fi; \
 372         )
 373 endef
 374
 375 define BusyboxOptions
 376         @( \
 377         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 378                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 379                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 380                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 381                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 382                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 383                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 384                 sed -i "/CONFIG_MKNOD/d" $(1); \
 385                 echo "CONFIG_MKNOD=y" >>$(1); \
 386                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 387                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 388         fi; \
 389         if [ "$(NO_CIFS)" = "y" ]; then \
 390                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 391                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 392         fi; \
 393         if [ "$(BBEXTRAS)" = "y" ]; then \
 394                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 395                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 396                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 397                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 398                 sed -i "/CONFIG_FTPPUT/d" $(1); \
 399                 echo "CONFIG_FTPPUT=y" >>$(1); \
 400                 sed -i "/CONFIG_FTPGET/d" $(1); \
 401                 echo "CONFIG_FTPGET=y" >>$(1); \
 402                 sed -i "/CONFIG_CLEAR/d" $(1); \
 403                 echo "CONFIG_CLEAR=y" >>$(1); \
 404                 sed -i "/CONFIG_NICE/d" $(1); \
 405                 echo "CONFIG_NICE=y" >>$(1); \
 406                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 407                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 408                 sed -i "/CONFIG_MKFIFO/d" $(1); \
 409                 echo "CONFIG_MKFIFO=y" >>$(1); \
 410         fi; \
 411         if [ "$(USB)" = "USB" ]; then \
 412                 if [ "$(USBEXTRAS)" = "y" ]; then \
 413                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 414                         echo "CONFIG_E2FSCK=y" >>$(1); \
 415                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 416                         echo "CONFIG_MKE2FS=y" >>$(1); \
 417                         sed -i "/CONFIG_FDISK/d" $(1); \
 418                         echo "CONFIG_FDISK=y" >>$(1); \
 419                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 420                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 421                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 422                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 423                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 424                         echo "CONFIG_MKSWAP=y" >>$(1); \
 425                         sed -i "/CONFIG_FLOCK/d" $(1); \
 426                         echo "CONFIG_FLOCK=y" >>$(1); \
 427                         sed -i "/CONFIG_FSYNC/d" $(1); \
 428                         echo "CONFIG_FSYNC=y" >>$(1); \
 429                         sed -i "/CONFIG_UNZIP/d" $(1); \
 430                         echo "CONFIG_UNZIP=y" >>$(1); \
 431                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 432                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 433                                 echo "CONFIG_LSUSB=y" >>$(1); \
 434                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 435                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 436                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 437                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 438                         fi; \
 439                 fi; \
 440         else \
 441                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 442                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 443                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 444                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 445                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 446                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 447                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 448                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 449                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 450                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 451                 sed -i "/CONFIG_BLKID/d" $(1); \
 452                 echo "# CONFIG_BLKID is not set" >>$(1); \
 453                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 454                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 455                 sed -i "/CONFIG_CHROOT/d" $(1); \
 456                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 457                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 458                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 459                 sed -i "/CONFIG_TRUE/d" $(1); \
 460                 echo "# CONFIG_TRUE is not set" >>$(1); \
 461         fi; \
 462         if [ "$(IPV6SUPP)" = "y" ]; then \
 463                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 464                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 465                 sed -i "/CONFIG_PING6/d" $(1); \
 466                 echo "CONFIG_PING6=y" >>$(1); \
 467                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 468                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 469                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 470                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 471                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 472                 fi; \
 473         fi; \
 474         if [ "$(SLIM)" = "y" ]; then \
 475                 sed -i "/CONFIG_AWK/d" $(1); \
 476                 echo "# CONFIG_AWK is not set" >>$(1); \
 477                 sed -i "/CONFIG_BASENAME/d" $(1); \
 478                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 479                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 480                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 481                 sed -i "/CONFIG_BLKID/d" $(1); \
 482                 echo "# CONFIG_BLKID is not set" >>$(1); \
 483                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 484                 echo "# CONFIG_TELNET is not set" >>$(1); \
 485                 sed -i "/CONFIG_ARPING/d" $(1); \
 486                 echo "# CONFIG_ARPING is not set" >>$(1); \
 487                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 488                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 489                 sed -i "/CONFIG_CHOWN/d" $(1); \
 490                 echo "# CONFIG_CHOWN is not set" >>$(1); \
 491         else \
 492                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 493                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 494                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 495                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 496         fi; \
 497         )
 498 endef
 499
 500 define KernelConfig
 501         @( \
 502         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 503         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 504         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 505         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 506                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 507         else \
 508                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 509         fi; \
 510         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 511                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 512                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 513                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 514                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 515                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 516                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 517         fi; \
 518         if [ "$(USB)" = "" ]; then \
 519                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 520                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 521         fi; \
 522         if [ "$(IPV6SUPP)" = "y" ]; then \
 523                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 524                 echo "CONFIG_IPV6=y" >>$(1); \
 525                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 526                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 527                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 528                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 529                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 530                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 531                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 532                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 533                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 534                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 535                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 536                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 537                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 538                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 539                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 540                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 541                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 542                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 543                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 544                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 545                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 546                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 547                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 548                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 549                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 550                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 551                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 552                         sed -i "/CONFIG_IPV6_OPTIMISTIC_DAD/d" $(1); \
 553                         echo "CONFIG_IPV6_OPTIMISTIC_DAD=y" >>$(1); \
 554                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 555                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 556                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 557                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 558                 else \
 559                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 560                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 561                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 562                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 563                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 564                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 565                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 566                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 567                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 568                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 569                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 570                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 571                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 572                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 573                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 574                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 575                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 576                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 577                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 578                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 579                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 580                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 581                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 582                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 583                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 584                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 585                 fi; \
 586         fi; \
 587         sed -i "/CONFIG_BCM57XX/d" $(1); \
 588         if [ "$(BCM57)" = "y" ]; then \
 589                 echo "CONFIG_BCM57XX=m" >>$(1); \
 590         else \
 591                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 592         fi; \
 593         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 594                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 595                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 596                 if [ "$(IPV6SUPP)" = "y" ]; then \
 597                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 598                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 599                 fi; \
 600         fi; \
 601         )
 602 endef
 603
 604
 605 bin:
 606 ifeq ($(B),)
 607         @echo $@" is not a valid target!"
 608         @false
 609 endif
 610         @cp router/config_base router/config_$(lowercase_B)
 611         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 612         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 613
 614         $(call RouterOptions, router/config_$(lowercase_B))
 615         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 616         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 617
 618         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)"
 619         @$(MAKE) all
 620
 621 ## Make the "normal" build
 622 a:
 623         @$(MAKE) bin B=A BUILD_DESC="Std" USB="USB" VLAN="$(VLAN)" SNMP=y
 624
 625 ## Make the "normal but without SSH" build
 626 b:
 627         @$(MAKE) bin NO_SSH=y B=B BUILD_DESC="No SSH" USB="USB" VLAN="$(VLAN)" SNMP=y
 628
 629 ## Make the "normal but without CIFS" build
 630 c:
 631         @$(MAKE) bin NO_CIFS=y B=C BUILD_DESC="No CIFS" USB="USB" VLAN="$(VLAN)" SNMP=y
 632
 633 ## Make the "normal but without SAMBA" (Lite) build
 634 d:
 635 ifeq ($(CONFIG_LINUX26),y)
 636         @$(MAKE) bin NO_SAMBA=y SLIM=y NO_CIFS=y NO_JFFS=y NO_ZEBRA=y B=D BUILD_DESC="Lite" USB="USB" VLAN="$(VLAN)" SNMP="$(SNMP)"
 637 else
 638         @$(MAKE) bin NO_SAMBA=y SLIM=y B=D BUILD_DESC="Lite" USB="USB" VLAN="$(VLAN)" SNMP="$(SNMP)"
 639 endif
 640
 641 ## Make the "normal (with NTFS support) + VPN" build
 642 e:
 643 ifeq ($(CONFIG_LINUX26),y)
 644         @$(MAKE) bin OPENVPN=y USERPPTP=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" SNMP=y
 645 else
 646 #       @$(MAKE) bin OPENVPN=y USERPPTP=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)"
 647         @$(MAKE) bin OPENVPN=y USERPPTP=y BBEXTRAS=y USBEXTRAS=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB" SNMP=y VLAN="$(VLAN)"
 648 endif
 649
 650 ## Make the "Mini: no USB, no CIFS, no Zebra" build - targeted for Netgear routers
 651 f:
 652         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y SLIM=y B=F BUILD_DESC="Mini" USB="" VLAN="$(VLAN)"
 653
 654 ## Make the "Tiny: no JFFS, no USB, no CIFS, no Zebra" build - targeted for cheapskate routers
 655 fs:
 656         @$(MAKE) bin NO_CIFS=y NO_JFFS=y NO_ZEBRA=y SLIM=y B=FS BUILD_DESC="Tiny" USB="" VLAN="$(VLAN)"
 657
 658 ## Make the "No USB with IPv6, no Zebra" build - for 4MB routers
 659 i:
 660         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB="" VLAN="$(VLAN)"
 661
 662 ## Make the "No USB with IPv6, no Zebra, with VPN" build - for 4MB routers
 663 ifeq ($(CONFIG_LINUX26),y)
 664 j:
 665         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_XXTP=y SLIM=y NO_SAMBA=y NO_ZEBRA=y IPV6SUPP=y OPENVPN=y USERPPTP=y NO_LIBOPT=y B=I BUILD_DESC="MiniIPv6-VPN" USB="" VLAN="$(VLAN)" SNMP="$(SNMP)"
 666 endif
 667
 668 ## Make the "normal with Extras and NTFS" build
 669 m:
 670 ifeq ($(CONFIG_LINUX26),y)
 671         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Ext" USB="USB" VLAN="$(VLAN)" SNMP=y USERPPTP=y
 672 else
 673         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Ext" USB="USB" VLAN="$(VLAN)" SNMP=y USERPPTP=y
 674 endif
 675
 676 ## Roadkill
 677 ## Make the "normal (with NTFS support) + VPN + NOCAT" build
 678 nc:
 679 ifeq ($(CONFIG_LINUX26),y)
 680         @$(MAKE) bin OPENVPN=y USERPPTP=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=NC BUILD_DESC="$(VPN)" USB="USB" SNMP=y VLAN="$(VLAN)" NOCAT=y BUILD_DESC+="-$(NC)"
 681 else
 682         @$(MAKE) bin OPENVPN=y USERPPTP=y NTFS=y B=NC BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" NOCAT=y BUILD_DESC+=" $(NC)"
 683 endif
 684
 685 ## Toastman
 686 ## Make the "Mini: no USB, + NOCAT" build - for 4MB routers
 687 ncm:
 688         @$(MAKE) bin JFFSv1=y NOCAT=y B=F BUILD_DESC="Mini-NOCAT" USB="" VLAN="$(VLAN)"
 689
 690 ## Toastman
 691 ## Make the "normal" build + NOCAT
 692 ncs:
 693         @$(MAKE) bin NOCAT=y B=A BUILD_DESC="Std-NOCAT" USB="USB" SNMP=y VLAN="$(VLAN)"
 694
 695
 696 ## Make the "No USB" build
 697 s:
 698 ifeq ($(CONFIG_LINUX26),y)
 699         @$(MAKE) bin JFFSv1=y $(if $(filter r2, $(MIPS32)),,BCM57=y) B=S BUILD_DESC="Std" USB="" SNMP=y VLAN="$(VLAN)"
 700 else
 701         @$(MAKE) bin BBEXTRAS=y BCM57=y B=S BUILD_DESC="Std" USB="" VLAN="$(VLAN)"
 702 endif
 703
 704
 705 ## Make the "No USB with Extras" build (K26 only, for 8MB flash)
 706 ifeq ($(CONFIG_LINUX26),y)
 707 t:
 708         @$(MAKE) bin B=S USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y BUILD_DESC="Std" SNMP=y VLAN="$(VLAN)"
 709 ## Make the "No USB with OpenVPN and Extras" build (K26 only, for 8MB flash)
 710 u:
 711         @$(MAKE) bin B=V USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y OPENVPN=y USERPPTP=y BUILD_DESC="$(VPN)"  SNMP=y VLAN="$(VLAN)"
 712 endif
 713
 714 ## Make the "VPN with no USB support" build
 715 v:
 716 ifeq ($(CONFIG_LINUX26),y)
 717         @$(MAKE) bin OPENVPN=y USERPPTP=y BBEXTRAS=y B=V BUILD_DESC="$(VPN)" USB=""  SNMP=y VLAN="$(VLAN)"
 718 else
 719         @$(MAKE) bin OPENVPN=y USERPPTP=y NO_JFFS=y BCM57=y B=V BUILD_DESC="$(VPN)" USB="" VLAN="$(VLAN)"
 720 endif
 721
 722 ## Make the "Small VPN with no USB support" build
 723 vs:
 724 ifeq ($(CONFIG_LINUX26),y)
 725         @$(MAKE) bin OPENVPN=y USERPPTP=y NO_JFFS=y NO_CIFS=y B=V BUILD_DESC="SmallVPN" USB=""
 726 else
 727         @$(MAKE) bin OPENVPN=y USERPPTP=y NO_JFFS=y NO_CIFS=y BCM57=y B=VS BUILD_DESC="SmallVPN" USB=""
 728 endif
 729
 730 ## Make Mips32r2 builds
 731
 732 r2a:
 733         @$(MAKE) a MIPS32=r2
 734
 735 r2b:
 736         @$(MAKE) b MIPS32=r2
 737
 738 r2c:
 739         @$(MAKE) c MIPS32=r2
 740
 741 r2d:
 742         @$(MAKE) d MIPS32=r2
 743
 744 r2e:
 745         @$(MAKE) e MIPS32=r2
 746
 747 r2f:
 748         @$(MAKE) f MIPS32=r2 BELKIN=y
 749
 750 r2fs:
 751         @$(MAKE) i MIPS32=r2
 752
 753 r2i:
 754         @$(MAKE) i MIPS32=r2
 755
 756 r2j:
 757         @$(MAKE) j MIPS32=r2
 758
 759 r2m:
 760         @$(MAKE) m MIPS32=r2
 761
 762 r2n:
 763         @$(MAKE) n MIPS32=r2
 764
 765 r2nc:
 766         @$(MAKE) nc MIPS32=r2
 767
 768 r2r:
 769         @$(MAKE) r MIPS32=r2
 770
 771 r2s:
 772         @$(MAKE) s MIPS32=r2
 773
 774 r2t:
 775         @$(MAKE) t MIPS32=r2
 776
 777 r2u:
 778         @$(MAKE) t MIPS32=r2
 779
 780 r2v:
 781         @$(MAKE) v MIPS32=r2
 782
 783 r2vs:
 784         @$(MAKE) vs MIPS32=r2
 785
 786 n60a:
 787         @$(MAKE) r2a NVRAM_SIZE=60 LINKSYS_E=y
 788
 789 n60b:
 790         @$(MAKE) r2b NVRAM_SIZE=60 LINKSYS_E=y
 791
 792 n60c:
 793         @$(MAKE) r2c NVRAM_SIZE=60 LINKSYS_E=y
 794
 795 n60e:
 796         @$(MAKE) r2e NVRAM_SIZE=60 LINKSYS_E=y
 797
 798 n60m:
 799         @$(MAKE) r2m NVRAM_SIZE=60 LINKSYS_E=y
 800
 801 n60n:
 802         @$(MAKE) r2n NVRAM_SIZE=60 LINKSYS_E=y
 803
 804 n60nc:
 805         @$(MAKE) r2nc NVRAM_SIZE=60 LINKSYS_E=y
 806
 807 n60o:
 808         @$(MAKE) r2o NVRAM_SIZE=60 LINKSYS_E=y
 809
 810 n60r:
 811         @$(MAKE) r2r NVRAM_SIZE=60 LINKSYS_E=y
 812
 813 n60s:
 814         @$(MAKE) bin MIPS32=r2 B=S USB="" NVRAM_SIZE=60 LINKSYS_E=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y BUILD_DESC="Std"
 815
 816 n60t:
 817         @$(MAKE) r2t NVRAM_SIZE=60 LINKSYS_E=y
 818
 819 n60v:
 820         @$(MAKE) bin MIPS32=r2 B=V USB="" NVRAM_SIZE=60 LINKSYS_E=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y OPENVPN=y USERPPTP=y BUILD_DESC="$(VPN)"
 821
 822
 823 setprofile:
 824         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
 825         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
 826         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
 827         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
 828         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
 829         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
 830         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
 831         echo '#define TOMATO_BUILD_DESC "$(DESC)"' >> router/shared/tomato_profile.h
 832         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
 833         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
 834         echo '#endif' >> router/shared/tomato_profile.h
 835         echo '#endif' >> router/shared/tomato_profile.h
 836
 837         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
 838         echo 'PROFILE_G = 1' >> tomato_profile.mak
 839         echo 'PROFILE_N = 2' >> tomato_profile.mak
 840         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
 841         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
 842         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
 843         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
 844         echo 'TOMATO_BUILD_DESC = "$(DESC)"' >> tomato_profile.mak
 845         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
 846         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
 847         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
 848
 849         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE))' >> tomato_profile.mak
 850
 851 # Note that changes to variables in tomato_profile.mak don't
 852 # get propogated to this invocation of make!
 853         @echo ""
 854         @echo "Using $(N) profile, $(B) build config."
 855         @echo ""
 856
 857         @cd $(LINUXDIR) ; \
 858                 rm -f config_current ; \
 859                 ln -s config_$(lowercase_B) config_current ; \
 860                 cp -f config_current .config
 861
 862         @cd router/busybox && \
 863                 rm -f config_current ; \
 864                 ln -s config_$(lowercase_B) config_current ; \
 865                 cp config_current .config
 866
 867         @cd router ; \
 868                 rm -f config_current ; \
 869                 ln -s config_$(lowercase_B) config_current ; \
 870                 cp config_current .config
 871
 872         @$(MAKE) -C router oldconfig
 873
 874 help:
 875         @echo "a            A build (standard)"
 876         @echo "b            B build (standard minus SSH)"
 877         @echo "c            C build (standard minus CIFS)"
 878         @echo "d            D build (standard minus Samba server)"
 879         @echo "m            M build (standard plus extra utilities and NTFS support)"
 880         @echo "nc           NC build (standard plus VPN, extra utilities, NTFS support and NOCAT)"
 881         @echo "ncm          NCS build (no USB support, NOCAT)"
 882         @echo "ncs          NCS build (std + NOCAT)"
 883         @echo "m            Ext - (standard plus extra utilities and NTFS support)"
 884
 885 ifeq ($(CONFIG_LINUX26),y)
 886         @echo "e            E build (standard plus VPN, extra utilities and NTFS support)"
 887         @echo "i            I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
 888 else
 889         @echo "e            E build (standard plus VPN and NTFS support)"
 890 endif
 891         @echo "s            S build (no USB support)"
 892         @echo "f            F build (no USB support minus CIFS and RIPv1/2)"
 893         @echo "fs           FS build (no USB support minus CIFS, JFFS, Zebra and RIPv1/2)"
 894         @echo "v            V build (VPN with no USB support)"
 895         @echo "vs           VS build (Small VPN with no USB support)"
 896
 897 ifeq ($(CONFIG_LINUX26),y)
 898         @echo "r2a          MIPS Release 2 A build (standard)"
 899         @echo "r2b          MIPS Release 2 B build (standard minus SSH)"
 900         @echo "r2c          MIPS Release 2 C build (standard minus CIFS)"
 901         @echo "r2d          MIPS Release 2 D build (standard minus Samba server)"
 902         @echo "r2e          MIPS Release 2 E build (standard plus VPN and extras)"
 903         @echo "r2f          MIPS Release 2 F build (no USB support minus CIFS, RIPv1/2)"
 904         @echo "r2fs         MIPS Release 2 FS build (no USB support minus JFFS, CIFS, RIPv1/2, Zebra)"
 905         @echo "r2i          MIPS Release 2 I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
 906         @echo "r2m          MIPS Release 2 M build (standard plus extras)"
 907         @echo "r2nc         MIPS Release 2 NC build (standard plus VPN, extras and NOCAT)"
 908         @echo "r2ncm        MIPS Release 2 NCM build (no USB support, plus NOCAT)"
 909         @echo "r2ncs        MIPS Release 2 NCS build (standard plus NOCAT)"
 910         @echo "r2s          MIPS Release 2 S build (no USB support)"
 911         @echo "r2t          MIPS Release 2 T build (no USB support with extras)"
 912         @echo "r2u          MIPS Release 2 U build (no USB support plus VPN with extras)"
 913         @echo "r2v          MIPS Release 2 V build (VPN with no USB support)"
 914         @echo "r2vs         MIPS Release 2 VS build (Small VPN with no USB support)"
 915         @echo "n60m         Linksys E-series build (60KB NVRAM, standard plus extras)"
 916         @echo "n60e         Linksys E-series build (60KB NVRAM, standard plus VPN and extras)"
 917         @echo "n60nc        Linksys E-series build (60KB NVRAM, standard plus extras, plus VPN, plus NOCAT)"
 918         @echo "n60s         Linksys E-series build (60KB NVRAM, no USB support)"
 919         @echo "n60v         Linksys E-series build (60KB NVRAM, VPN with no USB support)"
 920 endif
 921         @echo "..etc..      other build configs"
 922         @echo "clean        -C router clean"
 923         @echo "cleanimage   rm -rf image"
 924         @echo "cleantools   clean btools, mksquashfs"
 925         @echo "cleankernel  -C Linux distclean (but preserves .config)"
 926         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
 927         @echo "prepk        -C Linux oldconfig dep"
 928
 929 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
 930 .PHONY: a b c d m Makefile allversions tomato_profile.mak
 931
 932