Resync with broadcom drivers 5.100.138.20 and utilities.
[tomato.git] / release / src-rt / include / sbsprom.h
blob7bbcc0cc2906605a03ea709aa67d0e2ee3914120
1 /*
2 * SPROM format definitions for the Broadcom 47xx and 43xx chip family.
4 * $Id: sbsprom.h,v 1.6 2007-08-16 22:58:33 Exp $
5 * Copyright(c) 2002 Broadcom Corporation
6 */
8 #ifndef _SBSPROM_H
9 #define _SBSPROM_H
11 #include "typedefs.h"
12 #include "bcmdevs.h"
14 /* A word is this many bytes */
15 #define SRW 2
17 /* offset into PCI config space for write enable bit */
18 #define CFG_SROM_WRITABLE_OFFSET 0x88
19 #define SROM_WRITEABLE 0x10
21 /* enumeration space consists of N contiguous 4Kbyte core register sets */
22 #define SBCORES_BASE 0x18000000
23 #define SBCORES_EACH 0x1000
25 /* offset from BAR0 for srom space */
26 #define SROM_BASE 4096
28 /* number of 2-byte words in srom */
29 #define SROM_SIZE 64
31 #define SROM_BYTES (SROM_SIZE * SRW)
33 #define MAX_FN 4
35 /* Word 0, Hardware control */
36 #define SROM_HWCTL 0
37 #define HW_FUNMSK 0x000f
38 #define HW_FCLK 0x0200
39 #define HW_CBM 0x0400
40 #define HW_PIMSK 0xf000
41 #define HW_PISHIFT 12
42 #define HW_4301PISHIFT 13
43 #define HW_PI4402 0x2
44 #define HW_FUN4401 0x0001
45 #define HW_FCLK4402 0x0000
47 /* Word 1, common-power/boot-rom */
48 #define SROM_COMMPW 1
49 /* boot rom present bit */
50 #define BR_PRESSHIFT 8
51 /* 15:9 for n; boot rom size is 2^(14 + n) bytes */
52 #define BR_SIZESHIFT 9
54 /* Word 2, SubsystemId */
55 #define SROM_SSID 2
57 /* Word 3, VendorId */
58 #define SROM_VID 3
60 /* Function 0 info, function info length */
61 #define SROM_FN0 4
62 #define SROM_FNSZ 8
64 /* Within each function: */
65 /* Word 0, deviceID */
66 #define SRFN_DID 0
68 /* Words 1-2, ClassCode */
69 #define SRFN_CCL 1
70 /* Word 2, D0 Power */
71 #define SRFN_CCHD0 2
73 /* Word 3, PME and D1D2D3 power */
74 #define SRFN_PMED123 3
76 #define PME_IL 0
77 #define PME_ENET0 1
78 #define PME_ENET1 2
79 #define PME_CODEC 3
81 #define PME_4402_ENET 0
82 #define PME_4402_CODEC 1
83 #define PME_4301_WL 2
84 #define PMEREP_4402_ENET (PMERD3CV | PMERD3CA | PMERD3H | PMERD2 | PMERD1 | PMERD0 | PME)
86 /* Word 4, Bar1 enable, pme reports */
87 #define SRFN_B1PMER 4
88 #define B1E 1
89 #define B1SZMSK 0xe
90 #define B1SZSH 1
91 #define PMERMSK 0x0ff0
92 #define PME 0x0010
93 #define PMERD0 0x0020
94 #define PMERD1 0x0040
95 #define PMERD2 0x0080
96 #define PMERD3H 0x0100
97 #define PMERD3CA 0x0200
98 #define PMERD3CV 0x0400
99 #define IGNCLKRR 0x0800
100 #define B0LMSK 0xf000
102 /* Words 4-5, Bar0 Sonics value */
103 #define SRFN_B0H 5
104 /* Words 6-7, CIS Pointer */
105 #define SRFN_CISL 6
106 #define SRFN_CISH 7
108 /* Words 36-38: iLine MAC address */
109 #define SROM_I_MACHI 36
110 #define SROM_I_MACMID 37
111 #define SROM_I_MACLO 38
113 /* Words 36-38: wireless0 MAC address on 43xx */
114 #define SROM_W0_MACHI 36
115 #define SROM_W0_MACMID 37
116 #define SROM_W0_MACLO 38
118 /* Words 39-41: enet0 MAC address */
119 #define SROM_E0_MACHI 39
120 #define SROM_E0_MACMID 40
121 #define SROM_E0_MACLO 41
123 /* Words 42-44: enet1 MAC address */
124 #define SROM_E1_MACHI 42
125 #define SROM_E1_MACMID 43
126 #define SROM_E1_MACLO 44
128 /* Words 42-44: wireless1 MAC address on 4309 */
129 #define SROM_W1_MACHI 42
130 #define SROM_W1_MACMID 43
131 #define SROM_W1_MACLO 44
133 #define SROM_EPHY 45
135 /* Word 46: BdRev & Antennas0/1 & ccLock for 430x */
136 #define SROM_REV_AA_LOCK 46
138 /* Words 47-51 wl0 PA bx */
139 #define SROM_WL0_PAB0 47
140 #define SROM_WL0_PAB1 48
141 #define SROM_WL0_PAB2 49
142 #define SROM_WL0_PAB3 50
143 #define SROM_WL0_PAB4 51
145 /* Word 52: wl0/wl1 MaxPower */
146 #define SROM_WL_MAXPWR 52
148 /* Words 53-55 wl1 PA bx */
149 #define SROM_WL1_PAB0 53
150 #define SROM_WL1_PAB1 54
151 #define SROM_WL1_PAB2 55
153 /* Woprd 56: itt */
154 #define SROM_ITT 56
156 /* Words 59-62: OEM Space */
157 #define SROM_WL_OEM 59
158 #define SROM_OEM_SIZE 4
160 /* Contents for the srom */
162 #define BU4710_SSID 0x0400
163 #define VSIM4710_SSID 0x0401
164 #define QT4710_SSID 0x0402
166 #define BU4610_SSID 0x0403
167 #define VSIM4610_SSID 0x0404
169 #define BU4307_SSID 0x0405
170 #define BCM94301CB_SSID 0x0406
171 #define BCM94301MP_SSID 0x0407
172 #define BCM94307MP_SSID 0x0408
173 #define AP4307_SSID 0x0409
175 #define BU4309_SSID 0x040a
176 #define BCM94309CB_SSID 0x040b
177 #define BCM94309MP_SSID 0x040c
178 #define AP4309_SSID 0x040d
180 #define BU4312_SSID 0x048a
182 #define BU4402_SSID 0x4402
184 #define CLASS_OTHER 0x8000
185 #define CLASS_ETHER 0x0000
186 #define CLASS_NET 0x0002
187 #define CLASS_COMM 0x0007
188 #define CLASS_MODEM 0x0300
189 #define CLASS_MIPS 0x3000
190 #define CLASS_PROC 0x000b
191 #define CLASS_FLASH 0x0100
192 #define CLASS_MEM 0x0005
193 #define CLASS_SERIALBUS 0x000c
194 #define CLASS_OHCI 0x0310
196 /* Broadcom IEEE MAC addresses are 00:90:4c:xx:xx:xx */
197 #define MACHI 0x90
199 #define MACMID_BU4710I 0x4c17
200 #define MACMID_BU4710E0 0x4c18
201 #define MACMID_BU4710E1 0x4c19
203 #define MACMID_94710R1I 0x4c1a
204 #define MACMID_94710R1E0 0x4c1b
205 #define MACMID_94710R1E1 0x4c1c
207 #define MACMID_94710R4I 0x4c1d
208 #define MACMID_94710R4E0 0x4c1e
209 #define MACMID_94710R4E1 0x4c1f
211 #define MACMID_94710DEVI 0x4c20
212 #define MACMID_94710DEVE0 0x4c21
213 #define MACMID_94710DEVE1 0x4c22
215 #define MACMID_BU4402 0x4c23
217 #define MACMID_BU4610I 0x4c24
218 #define MACMID_BU4610E0 0x4c25
219 #define MACMID_BU4610E1 0x4c26
221 #define MACMID_BU4307W 0x4c27
222 #define MACMID_BU4307E 0x4c28
224 #define MACMID_94301CB 0x4c29
226 #define MACMID_94301MP 0x4c2a
228 #define MACMID_94307MPW 0x4c2b
229 #define MACMID_94307MPE 0x4c2c
231 #define MACMID_AP4307W 0x4c2d
232 #define MACMID_AP4307E 0x4c2e
234 #define MACMID_BU4309W0 0x4c2f
235 #define MACMID_BU4309W1 0x4c30
236 #define MACMID_BU4309E 0x4c31
238 #define MACMID_94309CBW0 0x4c32
239 #define MACMID_94309CBW1 0x4c33
241 #define MACMID_94309MPW0 0x4c34
242 #define MACMID_94309MPW1 0x4c35
243 #define MACMID_94309MPE 0x4c36
245 #define MACMID_BU4401 0x4c37
247 /* Enet phy settings one or two singles or a dual */
248 /* Bits 4-0 : MII address for enet0 (0x1f for not there */
249 /* Bits 9-5 : MII address for enet1 (0x1f for not there */
250 /* Bit 14 : Mdio for enet0 */
251 /* Bit 15 : Mdio for enet1 */
253 /* bu4710 with only one phy on enet1 with address 7: */
254 #define SROM_EPHY_ONE 0x80ff
256 /* bu4710 with two individual phys, at 6 and 7, */
257 /* each mdio connected to its own mac: */
258 #define SROM_EPHY_TWO 0x80e6
260 /* bu4710 with a dual phy addresses 0 & 1, mdio-connected to enet0 */
261 #define SROM_EPHY_DUAL 0x0001
263 /* r1 board with a dual phy at 0, 1 (NOT swapped and mdc0 */
264 #define SROM_EPHY_R1 0x0010
266 /* r4 board with a single phy on enet0 at address 5 and a switch */
267 /* chip on enet1 (speciall case: 0x1e */
268 #define SROM_EPHY_R4 0x83e5
270 /* 4402 uses an internal phy at phyaddr 1; want mdcport == coreunit == 0 */
271 #define SROM_EPHY_INTERNAL 0x0001
273 /* 4307 uses an external phy at phyaddr 0; want mdcport == coreunit == 0 */
274 #define SROM_EPHY_ZERO 0x0000
276 #define SROM_VERS 0x0001
279 #endif /* _SBSPROM_H */