hw/acpi_piix4.c

   1 /*
   2  * ACPI implementation
   3  *
   4  * Copyright (c) 2006 Fabrice Bellard
   5  *
   6  * This library is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU Lesser General Public
   8  * License version 2 as published by the Free Software Foundation.
   9  *
  10  * This library is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  13  * Lesser General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU Lesser General Public
  16  * License along with this library; if not, see <http://www.gnu.org/licenses/>
  17  */
  18 #include "hw.h"
  19 #include "pc.h"
  20 #include "apm.h"
  21 #include "pm_smbus.h"
  22 #include "pci.h"
  23 #include "acpi.h"
  24 #include "sysemu.h"
  25
  26 //#define DEBUG
  27
  28 #ifdef DEBUG
  29 # define PIIX4_DPRINTF(format, ...)     printf(format, ## __VA_ARGS__)
  30 #else
  31 # define PIIX4_DPRINTF(format, ...)     do { } while (0)
  32 #endif
  33
  34 #define ACPI_DBG_IO_ADDR  0xb044
  35
  36 #define GPE_BASE 0xafe0
  37 #define PCI_BASE 0xae00
  38 #define PCI_EJ_BASE 0xae08
  39
  40 struct gpe_regs {
  41     uint16_t sts; /* status */
  42     uint16_t en;  /* enabled */
  43 };
  44
  45 struct pci_status {
  46     uint32_t up;
  47     uint32_t down;
  48 };
  49
  50 typedef struct PIIX4PMState {
  51     PCIDevice dev;
  52     uint16_t pmsts;
  53     uint16_t pmen;
  54     uint16_t pmcntrl;
  55
  56     APMState apm;
  57
  58     QEMUTimer *tmr_timer;
  59     int64_t tmr_overflow_time;
  60
  61     PMSMBus smb;
  62     uint32_t smb_io_base;
  63
  64     qemu_irq irq;
  65     qemu_irq cmos_s3;
  66     qemu_irq smi_irq;
  67     int kvm_enabled;
  68
  69     /* for pci hotplug */
  70     struct gpe_regs gpe;
  71     struct pci_status pci0_status;
  72 } PIIX4PMState;
  73
  74 static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s);
  75
  76 #define ACPI_ENABLE 0xf1
  77 #define ACPI_DISABLE 0xf0
  78
  79 static uint32_t get_pmtmr(PIIX4PMState *s)
  80 {
  81     uint32_t d;
  82     d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
  83     return d & 0xffffff;
  84 }
  85
  86 static int get_pmsts(PIIX4PMState *s)
  87 {
  88     int64_t d;
  89
  90     d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
  91                  get_ticks_per_sec());
  92     if (d >= s->tmr_overflow_time)
  93         s->pmsts |= ACPI_BITMASK_TIMER_STATUS;
  94     return s->pmsts;
  95 }
  96
  97 static void pm_update_sci(PIIX4PMState *s)
  98 {
  99     int sci_level, pmsts;
 100     int64_t expire_time;
 101
 102     pmsts = get_pmsts(s);
 103     sci_level = (((pmsts & s->pmen) &
 104                   (ACPI_BITMASK_RT_CLOCK_ENABLE |
 105                    ACPI_BITMASK_POWER_BUTTON_ENABLE |
 106                    ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
 107                    ACPI_BITMASK_TIMER_ENABLE)) != 0);
 108     qemu_set_irq(s->irq, sci_level);
 109     /* schedule a timer interruption if needed */
 110     if ((s->pmen & ACPI_BITMASK_TIMER_ENABLE) &&
 111         !(pmsts & ACPI_BITMASK_TIMER_STATUS)) {
 112         expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(),
 113                                PM_TIMER_FREQUENCY);
 114         qemu_mod_timer(s->tmr_timer, expire_time);
 115     } else {
 116         qemu_del_timer(s->tmr_timer);
 117     }
 118 }
 119
 120 static void pm_tmr_timer(void *opaque)
 121 {
 122     PIIX4PMState *s = opaque;
 123     pm_update_sci(s);
 124 }
 125
 126 static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
 127 {
 128     PIIX4PMState *s = opaque;
 129     addr &= 0x3f;
 130     switch(addr) {
 131     case 0x00:
 132         {
 133             int64_t d;
 134             int pmsts;
 135             pmsts = get_pmsts(s);
 136             if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) {
 137                 /* if TMRSTS is reset, then compute the new overflow time */
 138                 d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
 139                              get_ticks_per_sec());
 140                 s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
 141             }
 142             s->pmsts &= ~val;
 143             pm_update_sci(s);
 144         }
 145         break;
 146     case 0x02:
 147         s->pmen = val;
 148         pm_update_sci(s);
 149         break;
 150     case 0x04:
 151         {
 152             int sus_typ;
 153             s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
 154             if (val & ACPI_BITMASK_SLEEP_ENABLE) {
 155                 /* change suspend type */
 156                 sus_typ = (val >> 10) & 7;
 157                 switch(sus_typ) {
 158                 case 0: /* soft power off */
 159                     qemu_system_shutdown_request();
 160                     break;
 161                 case 1:
 162                     /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
 163                        Pretend that resume was caused by power button */
 164                     s->pmsts |= (ACPI_BITMASK_WAKE_STATUS |
 165                                  ACPI_BITMASK_POWER_BUTTON_STATUS);
 166                     qemu_system_reset_request();
 167                     if (s->cmos_s3) {
 168                         qemu_irq_raise(s->cmos_s3);
 169                     }
 170                 default:
 171                     break;
 172                 }
 173             }
 174         }
 175         break;
 176     default:
 177         break;
 178     }
 179     PIIX4_DPRINTF("PM writew port=0x%04x val=0x%04x\n", addr, val);
 180 }
 181
 182 static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
 183 {
 184     PIIX4PMState *s = opaque;
 185     uint32_t val;
 186
 187     addr &= 0x3f;
 188     switch(addr) {
 189     case 0x00:
 190         val = get_pmsts(s);
 191         break;
 192     case 0x02:
 193         val = s->pmen;
 194         break;
 195     case 0x04:
 196         val = s->pmcntrl;
 197         break;
 198     default:
 199         val = 0;
 200         break;
 201     }
 202     PIIX4_DPRINTF("PM readw port=0x%04x val=0x%04x\n", addr, val);
 203     return val;
 204 }
 205
 206 static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
 207 {
 208     //    PIIX4PMState *s = opaque;
 209     PIIX4_DPRINTF("PM writel port=0x%04x val=0x%08x\n", addr & 0x3f, val);
 210 }
 211
 212 static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
 213 {
 214     PIIX4PMState *s = opaque;
 215     uint32_t val;
 216
 217     addr &= 0x3f;
 218     switch(addr) {
 219     case 0x08:
 220         val = get_pmtmr(s);
 221         break;
 222     default:
 223         val = 0;
 224         break;
 225     }
 226     PIIX4_DPRINTF("PM readl port=0x%04x val=0x%08x\n", addr, val);
 227     return val;
 228 }
 229
 230 static void apm_ctrl_changed(uint32_t val, void *arg)
 231 {
 232     PIIX4PMState *s = arg;
 233
 234     /* ACPI specs 3.0, 4.7.2.5 */
 235     if (val == ACPI_ENABLE) {
 236         s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE;
 237     } else if (val == ACPI_DISABLE) {
 238         s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE;
 239     }
 240
 241     if (s->dev.config[0x5b] & (1 << 1)) {
 242         if (s->smi_irq) {
 243             qemu_irq_raise(s->smi_irq);
 244         }
 245     }
 246 }
 247
 248 static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
 249 {
 250     PIIX4_DPRINTF("ACPI: DBG: 0x%08x\n", val);
 251 }
 252
 253 static void pm_io_space_update(PIIX4PMState *s)
 254 {
 255     uint32_t pm_io_base;
 256
 257     if (s->dev.config[0x80] & 1) {
 258         pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
 259         pm_io_base &= 0xffc0;
 260
 261         /* XXX: need to improve memory and ioport allocation */
 262         PIIX4_DPRINTF("PM: mapping to 0x%x\n", pm_io_base);
 263         register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s);
 264         register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s);
 265         register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s);
 266         register_ioport_read(pm_io_base, 64, 4, pm_ioport_readl, s);
 267     }
 268 }
 269
 270 static void pm_write_config(PCIDevice *d,
 271                             uint32_t address, uint32_t val, int len)
 272 {
 273     pci_default_write_config(d, address, val, len);
 274     if (range_covers_byte(address, len, 0x80))
 275         pm_io_space_update((PIIX4PMState *)d);
 276 }
 277
 278 static int vmstate_acpi_post_load(void *opaque, int version_id)
 279 {
 280     PIIX4PMState *s = opaque;
 281
 282     pm_io_space_update(s);
 283     return 0;
 284 }
 285
 286 static const VMStateDescription vmstate_gpe = {
 287     .name = "gpe",
 288     .version_id = 1,
 289     .minimum_version_id = 1,
 290     .minimum_version_id_old = 1,
 291     .fields      = (VMStateField []) {
 292         VMSTATE_UINT16(sts, struct gpe_regs),
 293         VMSTATE_UINT16(en, struct gpe_regs),
 294         VMSTATE_END_OF_LIST()
 295     }
 296 };
 297
 298 static const VMStateDescription vmstate_pci_status = {
 299     .name = "pci_status",
 300     .version_id = 1,
 301     .minimum_version_id = 1,
 302     .minimum_version_id_old = 1,
 303     .fields      = (VMStateField []) {
 304         VMSTATE_UINT32(up, struct pci_status),
 305         VMSTATE_UINT32(down, struct pci_status),
 306         VMSTATE_END_OF_LIST()
 307     }
 308 };
 309
 310 static const VMStateDescription vmstate_acpi = {
 311     .name = "piix4_pm",
 312     .version_id = 2,
 313     .minimum_version_id = 1,
 314     .minimum_version_id_old = 1,
 315     .post_load = vmstate_acpi_post_load,
 316     .fields      = (VMStateField []) {
 317         VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
 318         VMSTATE_UINT16(pmsts, PIIX4PMState),
 319         VMSTATE_UINT16(pmen, PIIX4PMState),
 320         VMSTATE_UINT16(pmcntrl, PIIX4PMState),
 321         VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
 322         VMSTATE_TIMER(tmr_timer, PIIX4PMState),
 323         VMSTATE_INT64(tmr_overflow_time, PIIX4PMState),
 324         VMSTATE_STRUCT(gpe, PIIX4PMState, 2, vmstate_gpe, struct gpe_regs),
 325         VMSTATE_STRUCT(pci0_status, PIIX4PMState, 2, vmstate_pci_status,
 326                        struct pci_status),
 327         VMSTATE_END_OF_LIST()
 328     }
 329 };
 330
 331 static void piix4_reset(void *opaque)
 332 {
 333     PIIX4PMState *s = opaque;
 334     uint8_t *pci_conf = s->dev.config;
 335
 336     pci_conf[0x58] = 0;
 337     pci_conf[0x59] = 0;
 338     pci_conf[0x5a] = 0;
 339     pci_conf[0x5b] = 0;
 340
 341     if (s->kvm_enabled) {
 342         /* Mark SMM as already inited (until KVM supports SMM). */
 343         pci_conf[0x5B] = 0x02;
 344     }
 345 }
 346
 347 static void piix4_powerdown(void *opaque, int irq, int power_failing)
 348 {
 349     PIIX4PMState *s = opaque;
 350
 351     if (!s) {
 352         qemu_system_shutdown_request();
 353     } else if (s->pmen & ACPI_BITMASK_POWER_BUTTON_ENABLE) {
 354         s->pmsts |= ACPI_BITMASK_POWER_BUTTON_STATUS;
 355         pm_update_sci(s);
 356     }
 357 }
 358
 359 static int piix4_pm_initfn(PCIDevice *dev)
 360 {
 361     PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, dev);
 362     uint8_t *pci_conf;
 363
 364     pci_conf = s->dev.config;
 365     pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
 366     pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3);
 367     pci_conf[0x06] = 0x80;
 368     pci_conf[0x07] = 0x02;
 369     pci_conf[0x08] = 0x03; // revision number
 370     pci_conf[0x09] = 0x00;
 371     pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER);
 372     pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
 373     pci_conf[0x3d] = 0x01; // interrupt pin 1
 374
 375     pci_conf[0x40] = 0x01; /* PM io base read only bit */
 376
 377     /* APM */
 378     apm_init(&s->apm, apm_ctrl_changed, s);
 379
 380     register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
 381
 382     if (s->kvm_enabled) {
 383         /* Mark SMM as already inited to prevent SMM from running.  KVM does not
 384          * support SMM mode. */
 385         pci_conf[0x5B] = 0x02;
 386     }
 387
 388     /* XXX: which specification is used ? The i82731AB has different
 389        mappings */
 390     pci_conf[0x5f] = (parallel_hds[0] != NULL ? 0x80 : 0) | 0x10;
 391     pci_conf[0x63] = 0x60;
 392     pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) |
 393         (serial_hds[1] != NULL ? 0x90 : 0);
 394
 395     pci_conf[0x90] = s->smb_io_base | 1;
 396     pci_conf[0x91] = s->smb_io_base >> 8;
 397     pci_conf[0xd2] = 0x09;
 398     register_ioport_write(s->smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
 399     register_ioport_read(s->smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
 400
 401     s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
 402
 403     qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);
 404
 405     pm_smbus_init(&s->dev.qdev, &s->smb);
 406     qemu_register_reset(piix4_reset, s);
 407     piix4_acpi_system_hot_add_init(dev->bus, s);
 408
 409     return 0;
 410 }
 411
 412 i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
 413                        qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
 414                        int kvm_enabled)
 415 {
 416     PCIDevice *dev;
 417     PIIX4PMState *s;
 418
 419     dev = pci_create(bus, devfn, "PIIX4_PM");
 420     qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
 421
 422     s = DO_UPCAST(PIIX4PMState, dev, dev);
 423     s->irq = sci_irq;
 424     s->cmos_s3 = cmos_s3;
 425     s->smi_irq = smi_irq;
 426     s->kvm_enabled = kvm_enabled;
 427
 428     qdev_init_nofail(&dev->qdev);
 429
 430     return s->smb.smbus;
 431 }
 432
 433 static PCIDeviceInfo piix4_pm_info = {
 434     .qdev.name          = "PIIX4_PM",
 435     .qdev.desc          = "PM",
 436     .qdev.size          = sizeof(PIIX4PMState),
 437     .qdev.vmsd          = &vmstate_acpi,
 438     .init               = piix4_pm_initfn,
 439     .config_write       = pm_write_config,
 440     .qdev.props         = (Property[]) {
 441         DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
 442         DEFINE_PROP_END_OF_LIST(),
 443     }
 444 };
 445
 446 static void piix4_pm_register(void)
 447 {
 448     pci_qdev_register(&piix4_pm_info);
 449 }
 450
 451 device_init(piix4_pm_register);
 452
 453 static uint32_t gpe_read_val(uint16_t val, uint32_t addr)
 454 {
 455     if (addr & 1)
 456         return (val >> 8) & 0xff;
 457     return val & 0xff;
 458 }
 459
 460 static uint32_t gpe_readb(void *opaque, uint32_t addr)
 461 {
 462     uint32_t val = 0;
 463     struct gpe_regs *g = opaque;
 464     switch (addr) {
 465         case GPE_BASE:
 466         case GPE_BASE + 1:
 467             val = gpe_read_val(g->sts, addr);
 468             break;
 469         case GPE_BASE + 2:
 470         case GPE_BASE + 3:
 471             val = gpe_read_val(g->en, addr);
 472             break;
 473         default:
 474             break;
 475     }
 476
 477     PIIX4_DPRINTF("gpe read %x == %x\n", addr, val);
 478     return val;
 479 }
 480
 481 static void gpe_write_val(uint16_t *cur, int addr, uint32_t val)
 482 {
 483     if (addr & 1)
 484         *cur = (*cur & 0xff) | (val << 8);
 485     else
 486         *cur = (*cur & 0xff00) | (val & 0xff);
 487 }
 488
 489 static void gpe_reset_val(uint16_t *cur, int addr, uint32_t val)
 490 {
 491     uint16_t x1, x0 = val & 0xff;
 492     int shift = (addr & 1) ? 8 : 0;
 493
 494     x1 = (*cur >> shift) & 0xff;
 495
 496     x1 = x1 & ~x0;
 497
 498     *cur = (*cur & (0xff << (8 - shift))) | (x1 << shift);
 499 }
 500
 501 static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
 502 {
 503     struct gpe_regs *g = opaque;
 504     switch (addr) {
 505         case GPE_BASE:
 506         case GPE_BASE + 1:
 507             gpe_reset_val(&g->sts, addr, val);
 508             break;
 509         case GPE_BASE + 2:
 510         case GPE_BASE + 3:
 511             gpe_write_val(&g->en, addr, val);
 512             break;
 513         default:
 514             break;
 515    }
 516
 517     PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val);
 518 }
 519
 520 static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
 521 {
 522     uint32_t val = 0;
 523     struct pci_status *g = opaque;
 524     switch (addr) {
 525         case PCI_BASE:
 526             val = g->up;
 527             break;
 528         case PCI_BASE + 4:
 529             val = g->down;
 530             break;
 531         default:
 532             break;
 533     }
 534
 535     PIIX4_DPRINTF("pcihotplug read %x == %x\n", addr, val);
 536     return val;
 537 }
 538
 539 static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
 540 {
 541     struct pci_status *g = opaque;
 542     switch (addr) {
 543         case PCI_BASE:
 544             g->up = val;
 545             break;
 546         case PCI_BASE + 4:
 547             g->down = val;
 548             break;
 549    }
 550
 551     PIIX4_DPRINTF("pcihotplug write %x <== %d\n", addr, val);
 552 }
 553
 554 static uint32_t pciej_read(void *opaque, uint32_t addr)
 555 {
 556     PIIX4_DPRINTF("pciej read %x\n", addr);
 557     return 0;
 558 }
 559
 560 static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
 561 {
 562     BusState *bus = opaque;
 563     DeviceState *qdev, *next;
 564     PCIDevice *dev;
 565     int slot = ffs(val) - 1;
 566
 567     QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
 568         dev = DO_UPCAST(PCIDevice, qdev, qdev);
 569         if (PCI_SLOT(dev->devfn) == slot) {
 570             qdev_free(qdev);
 571         }
 572     }
 573
 574
 575     PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
 576 }
 577
 578 static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state);
 579
 580 static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
 581 {
 582     struct gpe_regs *gpe = &s->gpe;
 583     struct pci_status *pci0_status = &s->pci0_status;
 584
 585     register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, gpe);
 586     register_ioport_read(GPE_BASE, 4, 1,  gpe_readb, gpe);
 587
 588     register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
 589     register_ioport_read(PCI_BASE, 8, 4,  pcihotplug_read, pci0_status);
 590
 591     register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
 592     register_ioport_read(PCI_EJ_BASE, 4, 4,  pciej_read, bus);
 593
 594     pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
 595 }
 596
 597 static void enable_device(PIIX4PMState *s, int slot)
 598 {
 599     s->gpe.sts |= 2;
 600     s->pci0_status.up |= (1 << slot);
 601 }
 602
 603 static void disable_device(PIIX4PMState *s, int slot)
 604 {
 605     s->gpe.sts |= 2;
 606     s->pci0_status.down |= (1 << slot);
 607 }
 608
 609 static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state)
 610 {
 611     int slot = PCI_SLOT(dev->devfn);
 612     PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
 613                                 DO_UPCAST(PCIDevice, qdev, qdev));
 614
 615     s->pci0_status.up = 0;
 616     s->pci0_status.down = 0;
 617     if (state) {
 618         enable_device(s, slot);
 619     } else {
 620         disable_device(s, slot);
 621     }
 622     if (s->gpe.en & 2) {
 623         qemu_set_irq(s->irq, 1);
 624         qemu_set_irq(s->irq, 0);
 625     }
 626     return 0;
 627 }