Quote configure's arguments and location while storing them in config_host.mak
[qemu/mini2440.git] / hw / pc.c
blob20827f2d66c15624c1da5fac5d30df3a03d36782
1 /*
2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "hw.h"
25 #include "pc.h"
26 #include "fdc.h"
27 #include "pci.h"
28 #include "block.h"
29 #include "sysemu.h"
30 #include "audio/audio.h"
31 #include "net.h"
32 #include "smbus.h"
33 #include "boards.h"
34 #include "console.h"
35 #include "fw_cfg.h"
36 #include "virtio-blk.h"
37 #include "virtio-balloon.h"
39 /* output Bochs bios info messages */
40 //#define DEBUG_BIOS
42 #define BIOS_FILENAME "bios.bin"
43 #define VGABIOS_FILENAME "vgabios.bin"
44 #define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
46 #define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
48 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
49 #define ACPI_DATA_SIZE 0x10000
50 #define BIOS_CFG_IOPORT 0x510
52 #define MAX_IDE_BUS 2
54 static fdctrl_t *floppy_controller;
55 static RTCState *rtc_state;
56 static PITState *pit;
57 static IOAPICState *ioapic;
58 static PCIDevice *i440fx_state;
60 static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
64 /* MSDOS compatibility mode FPU exception support */
65 static qemu_irq ferr_irq;
66 /* XXX: add IGNNE support */
67 void cpu_set_ferr(CPUX86State *s)
69 qemu_irq_raise(ferr_irq);
72 static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
74 qemu_irq_lower(ferr_irq);
77 /* TSC handling */
78 uint64_t cpu_get_tsc(CPUX86State *env)
80 /* Note: when using kqemu, it is more logical to return the host TSC
81 because kqemu does not trap the RDTSC instruction for
82 performance reasons */
83 #ifdef USE_KQEMU
84 if (env->kqemu_enabled) {
85 return cpu_get_real_ticks();
86 } else
87 #endif
89 return cpu_get_ticks();
93 /* SMM support */
94 void cpu_smm_update(CPUState *env)
96 if (i440fx_state && env == first_cpu)
97 i440fx_set_smm(i440fx_state, (env->hflags >> HF_SMM_SHIFT) & 1);
101 /* IRQ handling */
102 int cpu_get_pic_interrupt(CPUState *env)
104 int intno;
106 intno = apic_get_interrupt(env);
107 if (intno >= 0) {
108 /* set irq request if a PIC irq is still pending */
109 /* XXX: improve that */
110 pic_update_irq(isa_pic);
111 return intno;
113 /* read the irq from the PIC */
114 if (!apic_accept_pic_intr(env))
115 return -1;
117 intno = pic_read_irq(isa_pic);
118 return intno;
121 static void pic_irq_request(void *opaque, int irq, int level)
123 CPUState *env = first_cpu;
125 if (env->apic_state) {
126 while (env) {
127 if (apic_accept_pic_intr(env))
128 apic_deliver_pic_intr(env, level);
129 env = env->next_cpu;
131 } else {
132 if (level)
133 cpu_interrupt(env, CPU_INTERRUPT_HARD);
134 else
135 cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
139 /* PC cmos mappings */
141 #define REG_EQUIPMENT_BYTE 0x14
143 static int cmos_get_fd_drive_type(int fd0)
145 int val;
147 switch (fd0) {
148 case 0:
149 /* 1.44 Mb 3"5 drive */
150 val = 4;
151 break;
152 case 1:
153 /* 2.88 Mb 3"5 drive */
154 val = 5;
155 break;
156 case 2:
157 /* 1.2 Mb 5"5 drive */
158 val = 2;
159 break;
160 default:
161 val = 0;
162 break;
164 return val;
167 static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd)
169 RTCState *s = rtc_state;
170 int cylinders, heads, sectors;
171 bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);
172 rtc_set_memory(s, type_ofs, 47);
173 rtc_set_memory(s, info_ofs, cylinders);
174 rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
175 rtc_set_memory(s, info_ofs + 2, heads);
176 rtc_set_memory(s, info_ofs + 3, 0xff);
177 rtc_set_memory(s, info_ofs + 4, 0xff);
178 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
179 rtc_set_memory(s, info_ofs + 6, cylinders);
180 rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
181 rtc_set_memory(s, info_ofs + 8, sectors);
184 /* convert boot_device letter to something recognizable by the bios */
185 static int boot_device2nibble(char boot_device)
187 switch(boot_device) {
188 case 'a':
189 case 'b':
190 return 0x01; /* floppy boot */
191 case 'c':
192 return 0x02; /* hard drive boot */
193 case 'd':
194 return 0x03; /* CD-ROM boot */
195 case 'n':
196 return 0x04; /* Network boot */
198 return 0;
201 /* copy/pasted from cmos_init, should be made a general function
202 and used there as well */
203 static int pc_boot_set(void *opaque, const char *boot_device)
205 #define PC_MAX_BOOT_DEVICES 3
206 RTCState *s = (RTCState *)opaque;
207 int nbds, bds[3] = { 0, };
208 int i;
210 nbds = strlen(boot_device);
211 if (nbds > PC_MAX_BOOT_DEVICES) {
212 term_printf("Too many boot devices for PC\n");
213 return(1);
215 for (i = 0; i < nbds; i++) {
216 bds[i] = boot_device2nibble(boot_device[i]);
217 if (bds[i] == 0) {
218 term_printf("Invalid boot device for PC: '%c'\n",
219 boot_device[i]);
220 return(1);
223 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
224 rtc_set_memory(s, 0x38, (bds[2] << 4));
225 return(0);
228 /* hd_table must contain 4 block drivers */
229 static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
230 const char *boot_device, BlockDriverState **hd_table)
232 RTCState *s = rtc_state;
233 int nbds, bds[3] = { 0, };
234 int val;
235 int fd0, fd1, nb;
236 int i;
238 /* various important CMOS locations needed by PC/Bochs bios */
240 /* memory size */
241 val = 640; /* base memory in K */
242 rtc_set_memory(s, 0x15, val);
243 rtc_set_memory(s, 0x16, val >> 8);
245 val = (ram_size / 1024) - 1024;
246 if (val > 65535)
247 val = 65535;
248 rtc_set_memory(s, 0x17, val);
249 rtc_set_memory(s, 0x18, val >> 8);
250 rtc_set_memory(s, 0x30, val);
251 rtc_set_memory(s, 0x31, val >> 8);
253 if (above_4g_mem_size) {
254 rtc_set_memory(s, 0x5b, (unsigned int)above_4g_mem_size >> 16);
255 rtc_set_memory(s, 0x5c, (unsigned int)above_4g_mem_size >> 24);
256 rtc_set_memory(s, 0x5d, (uint64_t)above_4g_mem_size >> 32);
259 if (ram_size > (16 * 1024 * 1024))
260 val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
261 else
262 val = 0;
263 if (val > 65535)
264 val = 65535;
265 rtc_set_memory(s, 0x34, val);
266 rtc_set_memory(s, 0x35, val >> 8);
268 /* set the number of CPU */
269 rtc_set_memory(s, 0x5f, smp_cpus - 1);
271 /* set boot devices, and disable floppy signature check if requested */
272 #define PC_MAX_BOOT_DEVICES 3
273 nbds = strlen(boot_device);
274 if (nbds > PC_MAX_BOOT_DEVICES) {
275 fprintf(stderr, "Too many boot devices for PC\n");
276 exit(1);
278 for (i = 0; i < nbds; i++) {
279 bds[i] = boot_device2nibble(boot_device[i]);
280 if (bds[i] == 0) {
281 fprintf(stderr, "Invalid boot device for PC: '%c'\n",
282 boot_device[i]);
283 exit(1);
286 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
287 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1));
289 /* floppy type */
291 fd0 = fdctrl_get_drive_type(floppy_controller, 0);
292 fd1 = fdctrl_get_drive_type(floppy_controller, 1);
294 val = (cmos_get_fd_drive_type(fd0) << 4) | cmos_get_fd_drive_type(fd1);
295 rtc_set_memory(s, 0x10, val);
297 val = 0;
298 nb = 0;
299 if (fd0 < 3)
300 nb++;
301 if (fd1 < 3)
302 nb++;
303 switch (nb) {
304 case 0:
305 break;
306 case 1:
307 val |= 0x01; /* 1 drive, ready for boot */
308 break;
309 case 2:
310 val |= 0x41; /* 2 drives, ready for boot */
311 break;
313 val |= 0x02; /* FPU is there */
314 val |= 0x04; /* PS/2 mouse installed */
315 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
317 /* hard drives */
319 rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
320 if (hd_table[0])
321 cmos_init_hd(0x19, 0x1b, hd_table[0]);
322 if (hd_table[1])
323 cmos_init_hd(0x1a, 0x24, hd_table[1]);
325 val = 0;
326 for (i = 0; i < 4; i++) {
327 if (hd_table[i]) {
328 int cylinders, heads, sectors, translation;
329 /* NOTE: bdrv_get_geometry_hint() returns the physical
330 geometry. It is always such that: 1 <= sects <= 63, 1
331 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
332 geometry can be different if a translation is done. */
333 translation = bdrv_get_translation_hint(hd_table[i]);
334 if (translation == BIOS_ATA_TRANSLATION_AUTO) {
335 bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
336 if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
337 /* No translation. */
338 translation = 0;
339 } else {
340 /* LBA translation. */
341 translation = 1;
343 } else {
344 translation--;
346 val |= translation << (i * 2);
349 rtc_set_memory(s, 0x39, val);
352 void ioport_set_a20(int enable)
354 /* XXX: send to all CPUs ? */
355 cpu_x86_set_a20(first_cpu, enable);
358 int ioport_get_a20(void)
360 return ((first_cpu->a20_mask >> 20) & 1);
363 static void ioport92_write(void *opaque, uint32_t addr, uint32_t val)
365 ioport_set_a20((val >> 1) & 1);
366 /* XXX: bit 0 is fast reset */
369 static uint32_t ioport92_read(void *opaque, uint32_t addr)
371 return ioport_get_a20() << 1;
374 /***********************************************************/
375 /* Bochs BIOS debug ports */
377 static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
379 static const char shutdown_str[8] = "Shutdown";
380 static int shutdown_index = 0;
382 switch(addr) {
383 /* Bochs BIOS messages */
384 case 0x400:
385 case 0x401:
386 fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);
387 exit(1);
388 case 0x402:
389 case 0x403:
390 #ifdef DEBUG_BIOS
391 fprintf(stderr, "%c", val);
392 #endif
393 break;
394 case 0x8900:
395 /* same as Bochs power off */
396 if (val == shutdown_str[shutdown_index]) {
397 shutdown_index++;
398 if (shutdown_index == 8) {
399 shutdown_index = 0;
400 qemu_system_shutdown_request();
402 } else {
403 shutdown_index = 0;
405 break;
407 /* LGPL'ed VGA BIOS messages */
408 case 0x501:
409 case 0x502:
410 fprintf(stderr, "VGA BIOS panic, line %d\n", val);
411 exit(1);
412 case 0x500:
413 case 0x503:
414 #ifdef DEBUG_BIOS
415 fprintf(stderr, "%c", val);
416 #endif
417 break;
421 static void bochs_bios_init(void)
423 void *fw_cfg;
425 register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
426 register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);
427 register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);
428 register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);
429 register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
431 register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
432 register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
433 register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);
434 register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);
436 fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
437 fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
438 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
441 /* Generate an initial boot sector which sets state and jump to
442 a specified vector */
443 static void generate_bootsect(uint8_t *option_rom,
444 uint32_t gpr[8], uint16_t segs[6], uint16_t ip)
446 uint8_t rom[512], *p, *reloc;
447 uint8_t sum;
448 int i;
450 memset(rom, 0, sizeof(rom));
452 p = rom;
453 /* Make sure we have an option rom signature */
454 *p++ = 0x55;
455 *p++ = 0xaa;
457 /* ROM size in sectors*/
458 *p++ = 1;
460 /* Hook int19 */
462 *p++ = 0x50; /* push ax */
463 *p++ = 0x1e; /* push ds */
464 *p++ = 0x31; *p++ = 0xc0; /* xor ax, ax */
465 *p++ = 0x8e; *p++ = 0xd8; /* mov ax, ds */
467 *p++ = 0xc7; *p++ = 0x06; /* movvw _start,0x64 */
468 *p++ = 0x64; *p++ = 0x00;
469 reloc = p;
470 *p++ = 0x00; *p++ = 0x00;
472 *p++ = 0x8c; *p++ = 0x0e; /* mov cs,0x66 */
473 *p++ = 0x66; *p++ = 0x00;
475 *p++ = 0x1f; /* pop ds */
476 *p++ = 0x58; /* pop ax */
477 *p++ = 0xcb; /* lret */
479 /* Actual code */
480 *reloc = (p - rom);
482 *p++ = 0xfa; /* CLI */
483 *p++ = 0xfc; /* CLD */
485 for (i = 0; i < 6; i++) {
486 if (i == 1) /* Skip CS */
487 continue;
489 *p++ = 0xb8; /* MOV AX,imm16 */
490 *p++ = segs[i];
491 *p++ = segs[i] >> 8;
492 *p++ = 0x8e; /* MOV <seg>,AX */
493 *p++ = 0xc0 + (i << 3);
496 for (i = 0; i < 8; i++) {
497 *p++ = 0x66; /* 32-bit operand size */
498 *p++ = 0xb8 + i; /* MOV <reg>,imm32 */
499 *p++ = gpr[i];
500 *p++ = gpr[i] >> 8;
501 *p++ = gpr[i] >> 16;
502 *p++ = gpr[i] >> 24;
505 *p++ = 0xea; /* JMP FAR */
506 *p++ = ip; /* IP */
507 *p++ = ip >> 8;
508 *p++ = segs[1]; /* CS */
509 *p++ = segs[1] >> 8;
511 /* sign rom */
512 sum = 0;
513 for (i = 0; i < (sizeof(rom) - 1); i++)
514 sum += rom[i];
515 rom[sizeof(rom) - 1] = -sum;
517 memcpy(option_rom, rom, sizeof(rom));
520 static long get_file_size(FILE *f)
522 long where, size;
524 /* XXX: on Unix systems, using fstat() probably makes more sense */
526 where = ftell(f);
527 fseek(f, 0, SEEK_END);
528 size = ftell(f);
529 fseek(f, where, SEEK_SET);
531 return size;
534 static void load_linux(uint8_t *option_rom,
535 const char *kernel_filename,
536 const char *initrd_filename,
537 const char *kernel_cmdline)
539 uint16_t protocol;
540 uint32_t gpr[8];
541 uint16_t seg[6];
542 uint16_t real_seg;
543 int setup_size, kernel_size, initrd_size, cmdline_size;
544 uint32_t initrd_max;
545 uint8_t header[1024];
546 target_phys_addr_t real_addr, prot_addr, cmdline_addr, initrd_addr;
547 FILE *f, *fi;
549 /* Align to 16 bytes as a paranoia measure */
550 cmdline_size = (strlen(kernel_cmdline)+16) & ~15;
552 /* load the kernel header */
553 f = fopen(kernel_filename, "rb");
554 if (!f || !(kernel_size = get_file_size(f)) ||
555 fread(header, 1, 1024, f) != 1024) {
556 fprintf(stderr, "qemu: could not load kernel '%s'\n",
557 kernel_filename);
558 exit(1);
561 /* kernel protocol version */
562 #if 0
563 fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
564 #endif
565 if (ldl_p(header+0x202) == 0x53726448)
566 protocol = lduw_p(header+0x206);
567 else
568 protocol = 0;
570 if (protocol < 0x200 || !(header[0x211] & 0x01)) {
571 /* Low kernel */
572 real_addr = 0x90000;
573 cmdline_addr = 0x9a000 - cmdline_size;
574 prot_addr = 0x10000;
575 } else if (protocol < 0x202) {
576 /* High but ancient kernel */
577 real_addr = 0x90000;
578 cmdline_addr = 0x9a000 - cmdline_size;
579 prot_addr = 0x100000;
580 } else {
581 /* High and recent kernel */
582 real_addr = 0x10000;
583 cmdline_addr = 0x20000;
584 prot_addr = 0x100000;
587 #if 0
588 fprintf(stderr,
589 "qemu: real_addr = 0x" TARGET_FMT_plx "\n"
590 "qemu: cmdline_addr = 0x" TARGET_FMT_plx "\n"
591 "qemu: prot_addr = 0x" TARGET_FMT_plx "\n",
592 real_addr,
593 cmdline_addr,
594 prot_addr);
595 #endif
597 /* highest address for loading the initrd */
598 if (protocol >= 0x203)
599 initrd_max = ldl_p(header+0x22c);
600 else
601 initrd_max = 0x37ffffff;
603 if (initrd_max >= ram_size-ACPI_DATA_SIZE)
604 initrd_max = ram_size-ACPI_DATA_SIZE-1;
606 /* kernel command line */
607 pstrcpy_targphys(cmdline_addr, 4096, kernel_cmdline);
609 if (protocol >= 0x202) {
610 stl_p(header+0x228, cmdline_addr);
611 } else {
612 stw_p(header+0x20, 0xA33F);
613 stw_p(header+0x22, cmdline_addr-real_addr);
616 /* loader type */
617 /* High nybble = B reserved for Qemu; low nybble is revision number.
618 If this code is substantially changed, you may want to consider
619 incrementing the revision. */
620 if (protocol >= 0x200)
621 header[0x210] = 0xB0;
623 /* heap */
624 if (protocol >= 0x201) {
625 header[0x211] |= 0x80; /* CAN_USE_HEAP */
626 stw_p(header+0x224, cmdline_addr-real_addr-0x200);
629 /* load initrd */
630 if (initrd_filename) {
631 if (protocol < 0x200) {
632 fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
633 exit(1);
636 fi = fopen(initrd_filename, "rb");
637 if (!fi) {
638 fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
639 initrd_filename);
640 exit(1);
643 initrd_size = get_file_size(fi);
644 initrd_addr = (initrd_max-initrd_size) & ~4095;
646 fprintf(stderr, "qemu: loading initrd (%#x bytes) at 0x" TARGET_FMT_plx
647 "\n", initrd_size, initrd_addr);
649 if (!fread_targphys_ok(initrd_addr, initrd_size, fi)) {
650 fprintf(stderr, "qemu: read error on initial ram disk '%s'\n",
651 initrd_filename);
652 exit(1);
654 fclose(fi);
656 stl_p(header+0x218, initrd_addr);
657 stl_p(header+0x21c, initrd_size);
660 /* store the finalized header and load the rest of the kernel */
661 cpu_physical_memory_write(real_addr, header, 1024);
663 setup_size = header[0x1f1];
664 if (setup_size == 0)
665 setup_size = 4;
667 setup_size = (setup_size+1)*512;
668 kernel_size -= setup_size; /* Size of protected-mode code */
670 if (!fread_targphys_ok(real_addr+1024, setup_size-1024, f) ||
671 !fread_targphys_ok(prot_addr, kernel_size, f)) {
672 fprintf(stderr, "qemu: read error on kernel '%s'\n",
673 kernel_filename);
674 exit(1);
676 fclose(f);
678 /* generate bootsector to set up the initial register state */
679 real_seg = real_addr >> 4;
680 seg[0] = seg[2] = seg[3] = seg[4] = seg[4] = real_seg;
681 seg[1] = real_seg+0x20; /* CS */
682 memset(gpr, 0, sizeof gpr);
683 gpr[4] = cmdline_addr-real_addr-16; /* SP (-16 is paranoia) */
685 generate_bootsect(option_rom, gpr, seg, 0);
688 static void main_cpu_reset(void *opaque)
690 CPUState *env = opaque;
691 cpu_reset(env);
694 static const int ide_iobase[2] = { 0x1f0, 0x170 };
695 static const int ide_iobase2[2] = { 0x3f6, 0x376 };
696 static const int ide_irq[2] = { 14, 15 };
698 #define NE2000_NB_MAX 6
700 static int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };
701 static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
703 static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
704 static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };
706 static int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
707 static int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
709 #ifdef HAS_AUDIO
710 static void audio_init (PCIBus *pci_bus, qemu_irq *pic)
712 struct soundhw *c;
713 int audio_enabled = 0;
715 for (c = soundhw; !audio_enabled && c->name; ++c) {
716 audio_enabled = c->enabled;
719 if (audio_enabled) {
720 AudioState *s;
722 s = AUD_init ();
723 if (s) {
724 for (c = soundhw; c->name; ++c) {
725 if (c->enabled) {
726 if (c->isa) {
727 c->init.init_isa (s, pic);
729 else {
730 if (pci_bus) {
731 c->init.init_pci (pci_bus, s);
739 #endif
741 static void pc_init_ne2k_isa(NICInfo *nd, qemu_irq *pic)
743 static int nb_ne2k = 0;
745 if (nb_ne2k == NE2000_NB_MAX)
746 return;
747 isa_ne2000_init(ne2000_io[nb_ne2k], pic[ne2000_irq[nb_ne2k]], nd);
748 nb_ne2k++;
751 /* PC hardware initialisation */
752 static void pc_init1(ram_addr_t ram_size, int vga_ram_size,
753 const char *boot_device, DisplayState *ds,
754 const char *kernel_filename, const char *kernel_cmdline,
755 const char *initrd_filename,
756 int pci_enabled, const char *cpu_model)
758 char buf[1024];
759 int ret, linux_boot, i;
760 ram_addr_t ram_addr, vga_ram_addr, bios_offset, vga_bios_offset;
761 ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
762 int bios_size, isa_bios_size, vga_bios_size;
763 PCIBus *pci_bus;
764 int piix3_devfn = -1;
765 CPUState *env;
766 NICInfo *nd;
767 qemu_irq *cpu_irq;
768 qemu_irq *i8259;
769 int index;
770 BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
771 BlockDriverState *fd[MAX_FD];
773 if (ram_size >= 0xe0000000 ) {
774 above_4g_mem_size = ram_size - 0xe0000000;
775 below_4g_mem_size = 0xe0000000;
776 } else {
777 below_4g_mem_size = ram_size;
780 linux_boot = (kernel_filename != NULL);
782 /* init CPUs */
783 if (cpu_model == NULL) {
784 #ifdef TARGET_X86_64
785 cpu_model = "qemu64";
786 #else
787 cpu_model = "qemu32";
788 #endif
791 for(i = 0; i < smp_cpus; i++) {
792 env = cpu_init(cpu_model);
793 if (!env) {
794 fprintf(stderr, "Unable to find x86 CPU definition\n");
795 exit(1);
797 if (i != 0)
798 env->halted = 1;
799 if (smp_cpus > 1) {
800 /* XXX: enable it in all cases */
801 env->cpuid_features |= CPUID_APIC;
803 qemu_register_reset(main_cpu_reset, env);
804 if (pci_enabled) {
805 apic_init(env);
809 vmport_init();
811 /* allocate RAM */
812 ram_addr = qemu_ram_alloc(0xa0000);
813 cpu_register_physical_memory(0, 0xa0000, ram_addr);
815 /* Allocate, even though we won't register, so we don't break the
816 * phys_ram_base + PA assumption. This range includes vga (0xa0000 - 0xc0000),
817 * and some bios areas, which will be registered later
819 ram_addr = qemu_ram_alloc(0x100000 - 0xa0000);
820 ram_addr = qemu_ram_alloc(below_4g_mem_size - 0x100000);
821 cpu_register_physical_memory(0x100000,
822 below_4g_mem_size - 0x100000,
823 ram_addr);
825 /* above 4giga memory allocation */
826 if (above_4g_mem_size > 0) {
827 ram_addr = qemu_ram_alloc(above_4g_mem_size);
828 cpu_register_physical_memory(0x100000000ULL,
829 above_4g_mem_size,
830 ram_addr);
834 /* allocate VGA RAM */
835 vga_ram_addr = qemu_ram_alloc(vga_ram_size);
837 /* BIOS load */
838 if (bios_name == NULL)
839 bios_name = BIOS_FILENAME;
840 snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
841 bios_size = get_image_size(buf);
842 if (bios_size <= 0 ||
843 (bios_size % 65536) != 0) {
844 goto bios_error;
846 bios_offset = qemu_ram_alloc(bios_size);
847 ret = load_image(buf, phys_ram_base + bios_offset);
848 if (ret != bios_size) {
849 bios_error:
850 fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", buf);
851 exit(1);
854 /* VGA BIOS load */
855 if (cirrus_vga_enabled) {
856 snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_CIRRUS_FILENAME);
857 } else {
858 snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);
860 vga_bios_size = get_image_size(buf);
861 if (vga_bios_size <= 0 || vga_bios_size > 65536)
862 goto vga_bios_error;
863 vga_bios_offset = qemu_ram_alloc(65536);
865 ret = load_image(buf, phys_ram_base + vga_bios_offset);
866 if (ret != vga_bios_size) {
867 vga_bios_error:
868 fprintf(stderr, "qemu: could not load VGA BIOS '%s'\n", buf);
869 exit(1);
872 /* setup basic memory access */
873 cpu_register_physical_memory(0xc0000, 0x10000,
874 vga_bios_offset | IO_MEM_ROM);
876 /* map the last 128KB of the BIOS in ISA space */
877 isa_bios_size = bios_size;
878 if (isa_bios_size > (128 * 1024))
879 isa_bios_size = 128 * 1024;
880 cpu_register_physical_memory(0x100000 - isa_bios_size,
881 isa_bios_size,
882 (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
885 ram_addr_t option_rom_offset;
886 int size, offset;
888 offset = 0;
889 if (linux_boot) {
890 option_rom_offset = qemu_ram_alloc(TARGET_PAGE_SIZE);
891 load_linux(phys_ram_base + option_rom_offset,
892 kernel_filename, initrd_filename, kernel_cmdline);
893 cpu_register_physical_memory(0xd0000, TARGET_PAGE_SIZE,
894 option_rom_offset | IO_MEM_ROM);
895 offset = TARGET_PAGE_SIZE;
898 for (i = 0; i < nb_option_roms; i++) {
899 size = get_image_size(option_rom[i]);
900 if (size < 0) {
901 fprintf(stderr, "Could not load option rom '%s'\n",
902 option_rom[i]);
903 exit(1);
905 if (size > (0x10000 - offset))
906 goto option_rom_error;
907 option_rom_offset = qemu_ram_alloc(size);
908 ret = load_image(option_rom[i], phys_ram_base + option_rom_offset);
909 if (ret != size) {
910 option_rom_error:
911 fprintf(stderr, "Too many option ROMS\n");
912 exit(1);
914 size = (size + 4095) & ~4095;
915 cpu_register_physical_memory(0xd0000 + offset,
916 size, option_rom_offset | IO_MEM_ROM);
917 offset += size;
921 /* map all the bios at the top of memory */
922 cpu_register_physical_memory((uint32_t)(-bios_size),
923 bios_size, bios_offset | IO_MEM_ROM);
925 bochs_bios_init();
927 cpu_irq = qemu_allocate_irqs(pic_irq_request, NULL, 1);
928 i8259 = i8259_init(cpu_irq[0]);
929 ferr_irq = i8259[13];
931 if (pci_enabled) {
932 pci_bus = i440fx_init(&i440fx_state, i8259);
933 piix3_devfn = piix3_init(pci_bus, -1);
934 } else {
935 pci_bus = NULL;
938 /* init basic PC hardware */
939 register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
941 register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
943 if (cirrus_vga_enabled) {
944 if (pci_enabled) {
945 pci_cirrus_vga_init(pci_bus,
946 ds, phys_ram_base + vga_ram_addr,
947 vga_ram_addr, vga_ram_size);
948 } else {
949 isa_cirrus_vga_init(ds, phys_ram_base + vga_ram_addr,
950 vga_ram_addr, vga_ram_size);
952 } else if (vmsvga_enabled) {
953 if (pci_enabled)
954 pci_vmsvga_init(pci_bus, ds, phys_ram_base + vga_ram_addr,
955 vga_ram_addr, vga_ram_size);
956 else
957 fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
958 } else {
959 if (pci_enabled) {
960 pci_vga_init(pci_bus, ds, phys_ram_base + vga_ram_addr,
961 vga_ram_addr, vga_ram_size, 0, 0);
962 } else {
963 isa_vga_init(ds, phys_ram_base + vga_ram_addr,
964 vga_ram_addr, vga_ram_size);
968 rtc_state = rtc_init(0x70, i8259[8]);
970 qemu_register_boot_set(pc_boot_set, rtc_state);
972 register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
973 register_ioport_write(0x92, 1, 1, ioport92_write, NULL);
975 if (pci_enabled) {
976 ioapic = ioapic_init();
978 pit = pit_init(0x40, i8259[0]);
979 pcspk_init(pit);
980 if (pci_enabled) {
981 pic_set_alt_irq_func(isa_pic, ioapic_set_irq, ioapic);
984 for(i = 0; i < MAX_SERIAL_PORTS; i++) {
985 if (serial_hds[i]) {
986 serial_init(serial_io[i], i8259[serial_irq[i]], 115200,
987 serial_hds[i]);
991 for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
992 if (parallel_hds[i]) {
993 parallel_init(parallel_io[i], i8259[parallel_irq[i]],
994 parallel_hds[i]);
998 for(i = 0; i < nb_nics; i++) {
999 nd = &nd_table[i];
1000 if (!nd->model) {
1001 if (pci_enabled) {
1002 nd->model = "ne2k_pci";
1003 } else {
1004 nd->model = "ne2k_isa";
1007 if (strcmp(nd->model, "ne2k_isa") == 0) {
1008 pc_init_ne2k_isa(nd, i8259);
1009 } else if (pci_enabled) {
1010 if (strcmp(nd->model, "?") == 0)
1011 fprintf(stderr, "qemu: Supported ISA NICs: ne2k_isa\n");
1012 pci_nic_init(pci_bus, nd, -1);
1013 } else if (strcmp(nd->model, "?") == 0) {
1014 fprintf(stderr, "qemu: Supported ISA NICs: ne2k_isa\n");
1015 exit(1);
1016 } else {
1017 fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
1018 exit(1);
1022 if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
1023 fprintf(stderr, "qemu: too many IDE bus\n");
1024 exit(1);
1027 for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
1028 index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
1029 if (index != -1)
1030 hd[i] = drives_table[index].bdrv;
1031 else
1032 hd[i] = NULL;
1035 if (pci_enabled) {
1036 pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1, i8259);
1037 } else {
1038 for(i = 0; i < MAX_IDE_BUS; i++) {
1039 isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
1040 hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
1044 i8042_init(i8259[1], i8259[12], 0x60);
1045 DMA_init(0);
1046 #ifdef HAS_AUDIO
1047 audio_init(pci_enabled ? pci_bus : NULL, i8259);
1048 #endif
1050 for(i = 0; i < MAX_FD; i++) {
1051 index = drive_get_index(IF_FLOPPY, 0, i);
1052 if (index != -1)
1053 fd[i] = drives_table[index].bdrv;
1054 else
1055 fd[i] = NULL;
1057 floppy_controller = fdctrl_init(i8259[6], 2, 0, 0x3f0, fd);
1059 cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
1061 if (pci_enabled && usb_enabled) {
1062 usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
1065 if (pci_enabled && acpi_enabled) {
1066 uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
1067 i2c_bus *smbus;
1069 /* TODO: Populate SPD eeprom data. */
1070 smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100, i8259[9]);
1071 for (i = 0; i < 8; i++) {
1072 smbus_eeprom_device_init(smbus, 0x50 + i, eeprom_buf + (i * 256));
1076 if (i440fx_state) {
1077 i440fx_init_memory_mappings(i440fx_state);
1080 if (pci_enabled) {
1081 int max_bus;
1082 int bus, unit;
1083 void *scsi;
1085 max_bus = drive_get_max_bus(IF_SCSI);
1087 for (bus = 0; bus <= max_bus; bus++) {
1088 scsi = lsi_scsi_init(pci_bus, -1);
1089 for (unit = 0; unit < LSI_MAX_DEVS; unit++) {
1090 index = drive_get_index(IF_SCSI, bus, unit);
1091 if (index == -1)
1092 continue;
1093 lsi_scsi_attach(scsi, drives_table[index].bdrv, unit);
1098 /* Add virtio block devices */
1099 if (pci_enabled) {
1100 int index;
1101 int unit_id = 0;
1103 while ((index = drive_get_index(IF_VIRTIO, 0, unit_id)) != -1) {
1104 virtio_blk_init(pci_bus, 0x1AF4, 0x1001,
1105 drives_table[index].bdrv);
1106 unit_id++;
1110 /* Add virtio balloon device */
1111 if (pci_enabled)
1112 virtio_balloon_init(pci_bus);
1115 static void pc_init_pci(ram_addr_t ram_size, int vga_ram_size,
1116 const char *boot_device, DisplayState *ds,
1117 const char *kernel_filename,
1118 const char *kernel_cmdline,
1119 const char *initrd_filename,
1120 const char *cpu_model)
1122 pc_init1(ram_size, vga_ram_size, boot_device, ds,
1123 kernel_filename, kernel_cmdline,
1124 initrd_filename, 1, cpu_model);
1127 static void pc_init_isa(ram_addr_t ram_size, int vga_ram_size,
1128 const char *boot_device, DisplayState *ds,
1129 const char *kernel_filename,
1130 const char *kernel_cmdline,
1131 const char *initrd_filename,
1132 const char *cpu_model)
1134 pc_init1(ram_size, vga_ram_size, boot_device, ds,
1135 kernel_filename, kernel_cmdline,
1136 initrd_filename, 0, cpu_model);
1139 QEMUMachine pc_machine = {
1140 .name = "pc",
1141 .desc = "Standard PC",
1142 .init = pc_init_pci,
1143 .ram_require = VGA_RAM_SIZE + PC_MAX_BIOS_SIZE,
1144 .max_cpus = 255,
1147 QEMUMachine isapc_machine = {
1148 .name = "isapc",
1149 .desc = "ISA-only PC",
1150 .init = pc_init_isa,
1151 .ram_require = VGA_RAM_SIZE + PC_MAX_BIOS_SIZE,
1152 .max_cpus = 1,