hw/onenand.c

   1 /*
   2  * OneNAND flash memories emulation.
   3  *
   4  * Copyright (C) 2008 Nokia Corporation
   5  * Written by Andrzej Zaborowski <andrew@openedhand.com>
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 or
  10  * (at your option) version 3 of the License.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #include "qemu-common.h"
  24 #include "flash.h"
  25 #include "irq.h"
  26 #include "sysemu.h"
  27 #include "block.h"
  28
  29 /* 11 for 2kB-page OneNAND ("2nd generation") and 10 for 1kB-page chips */
  30 #define PAGE_SHIFT      11
  31
  32 /* Fixed */
  33 #define BLOCK_SHIFT     (PAGE_SHIFT + 6)
  34
  35 struct onenand_s {
  36     uint32_t id;
  37     int shift;
  38     target_phys_addr_t base;
  39     qemu_irq intr;
  40     qemu_irq rdy;
  41     BlockDriverState *bdrv;
  42     BlockDriverState *bdrv_cur;
  43     uint8_t *image;
  44     uint8_t *otp;
  45     uint8_t *current;
  46     ram_addr_t ram;
  47     uint8_t *boot[2];
  48     uint8_t *data[2][2];
  49     int iomemtype;
  50     int cycle;
  51     int otpmode;
  52
  53     uint16_t addr[8];
  54     uint16_t unladdr[8];
  55     int bufaddr;
  56     int count;
  57     uint16_t command;
  58     uint16_t config[2];
  59     uint16_t status;
  60     uint16_t intstatus;
  61     uint16_t wpstatus;
  62
  63     struct ecc_state_s ecc;
  64
  65     int density_mask;
  66     int secs;
  67     int secs_cur;
  68     int blocks;
  69     uint8_t *blockwp;
  70 };
  71
  72 enum {
  73     ONEN_BUF_BLOCK = 0,
  74     ONEN_BUF_BLOCK2 = 1,
  75     ONEN_BUF_DEST_BLOCK = 2,
  76     ONEN_BUF_DEST_PAGE = 3,
  77     ONEN_BUF_PAGE = 7,
  78 };
  79
  80 enum {
  81     ONEN_ERR_CMD = 1 << 10,
  82     ONEN_ERR_ERASE = 1 << 11,
  83     ONEN_ERR_PROG = 1 << 12,
  84     ONEN_ERR_LOAD = 1 << 13,
  85 };
  86
  87 enum {
  88     ONEN_INT_RESET = 1 << 4,
  89     ONEN_INT_ERASE = 1 << 5,
  90     ONEN_INT_PROG = 1 << 6,
  91     ONEN_INT_LOAD = 1 << 7,
  92     ONEN_INT = 1 << 15,
  93 };
  94
  95 enum {
  96     ONEN_LOCK_LOCKTIGHTEN = 1 << 0,
  97     ONEN_LOCK_LOCKED = 1 << 1,
  98     ONEN_LOCK_UNLOCKED = 1 << 2,
  99 };
 100
 101 void onenand_base_update(void *opaque, target_phys_addr_t new)
 102 {
 103     struct onenand_s *s = (struct onenand_s *) opaque;
 104
 105     s->base = new;
 106
 107     /* XXX: We should use IO_MEM_ROMD but we broke it earlier...
 108      * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to
 109      * write boot commands.  Also take note of the BWPS bit.  */
 110     cpu_register_physical_memory(s->base + (0x0000 << s->shift),
 111                     0x0200 << s->shift, s->iomemtype);
 112     cpu_register_physical_memory(s->base + (0x0200 << s->shift),
 113                     0xbe00 << s->shift,
 114                     (s->ram +(0x0200 << s->shift)) | IO_MEM_RAM);
 115     if (s->iomemtype)
 116         cpu_register_physical_memory_offset(s->base + (0xc000 << s->shift),
 117                     0x4000 << s->shift, s->iomemtype, (0xc000 << s->shift));
 118 }
 119
 120 void onenand_base_unmap(void *opaque)
 121 {
 122     struct onenand_s *s = (struct onenand_s *) opaque;
 123
 124     cpu_register_physical_memory(s->base,
 125                     0x10000 << s->shift, IO_MEM_UNASSIGNED);
 126 }
 127
 128 static void onenand_intr_update(struct onenand_s *s)
 129 {
 130     qemu_set_irq(s->intr, ((s->intstatus >> 15) ^ (~s->config[0] >> 6)) & 1);
 131 }
 132
 133 /* Hot reset (Reset OneNAND command) or warm reset (RP pin low) */
 134 static void onenand_reset(struct onenand_s *s, int cold)
 135 {
 136     memset(&s->addr, 0, sizeof(s->addr));
 137     s->command = 0;
 138     s->count = 1;
 139     s->bufaddr = 0;
 140     s->config[0] = 0x40c0;
 141     s->config[1] = 0x0000;
 142     onenand_intr_update(s);
 143     qemu_irq_raise(s->rdy);
 144     s->status = 0x0000;
 145     s->intstatus = cold ? 0x8080 : 0x8010;
 146     s->unladdr[0] = 0;
 147     s->unladdr[1] = 0;
 148     s->wpstatus = 0x0002;
 149     s->cycle = 0;
 150     s->otpmode = 0;
 151     s->bdrv_cur = s->bdrv;
 152     s->current = s->image;
 153     s->secs_cur = s->secs;
 154
 155     if (cold) {
 156         /* Lock the whole flash */
 157         memset(s->blockwp, ONEN_LOCK_LOCKED, s->blocks);
 158
 159         if (s->bdrv && bdrv_read(s->bdrv, 0, s->boot[0], 8) < 0)
 160             cpu_abort(cpu_single_env, "%s: Loading the BootRAM failed.\n",
 161                             __FUNCTION__);
 162     }
 163 }
 164
 165 static inline int onenand_load_main(struct onenand_s *s, int sec, int secn,
 166                 void *dest)
 167 {
 168     if (s->bdrv_cur)
 169         return bdrv_read(s->bdrv_cur, sec, dest, secn) < 0;
 170     else if (sec + secn > s->secs_cur)
 171         return 1;
 172
 173     memcpy(dest, s->current + (sec << 9), secn << 9);
 174
 175     return 0;
 176 }
 177
 178 static inline int onenand_prog_main(struct onenand_s *s, int sec, int secn,
 179                 void *src)
 180 {
 181     if (s->bdrv_cur)
 182         return bdrv_write(s->bdrv_cur, sec, src, secn) < 0;
 183     else if (sec + secn > s->secs_cur)
 184         return 1;
 185
 186     memcpy(s->current + (sec << 9), src, secn << 9);
 187
 188     return 0;
 189 }
 190
 191 static inline int onenand_load_spare(struct onenand_s *s, int sec, int secn,
 192                 void *dest)
 193 {
 194     uint8_t buf[512];
 195
 196     if (s->bdrv_cur) {
 197         if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0)
 198             return 1;
 199         memcpy(dest, buf + ((sec & 31) << 4), secn << 4);
 200     } else if (sec + secn > s->secs_cur)
 201         return 1;
 202     else
 203         memcpy(dest, s->current + (s->secs_cur << 9) + (sec << 4), secn << 4);
 204
 205     return 0;
 206 }
 207
 208 static inline int onenand_prog_spare(struct onenand_s *s, int sec, int secn,
 209                 void *src)
 210 {
 211     uint8_t buf[512];
 212
 213     if (s->bdrv_cur) {
 214         if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0)
 215             return 1;
 216         memcpy(buf + ((sec & 31) << 4), src, secn << 4);
 217         return bdrv_write(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0;
 218     } else if (sec + secn > s->secs_cur)
 219         return 1;
 220
 221     memcpy(s->current + (s->secs_cur << 9) + (sec << 4), src, secn << 4);
 222
 223     return 0;
 224 }
 225
 226 static inline int onenand_erase(struct onenand_s *s, int sec, int num)
 227 {
 228     /* TODO: optimise */
 229     uint8_t buf[512];
 230
 231     memset(buf, 0xff, sizeof(buf));
 232     for (; num > 0; num --, sec ++) {
 233         if (onenand_prog_main(s, sec, 1, buf))
 234             return 1;
 235         if (onenand_prog_spare(s, sec, 1, buf))
 236             return 1;
 237     }
 238
 239     return 0;
 240 }
 241
 242 static void onenand_command(struct onenand_s *s, int cmd)
 243 {
 244     int b;
 245     int sec;
 246     void *buf;
 247 #define SETADDR(block, page)                    \
 248     sec = (s->addr[page] & 3) +                 \
 249             ((((s->addr[page] >> 2) & 0x3f) +   \
 250               (((s->addr[block] & 0xfff) |      \
 251                 (s->addr[block] >> 15 ?         \
 252                  s->density_mask : 0)) << 6)) << (PAGE_SHIFT - 9));
 253 #define SETBUF_M()                              \
 254     buf = (s->bufaddr & 8) ?                    \
 255             s->data[(s->bufaddr >> 2) & 1][0] : s->boot[0];     \
 256     buf += (s->bufaddr & 3) << 9;
 257 #define SETBUF_S()                              \
 258     buf = (s->bufaddr & 8) ?                    \
 259             s->data[(s->bufaddr >> 2) & 1][1] : s->boot[1];     \
 260     buf += (s->bufaddr & 3) << 4;
 261
 262     switch (cmd) {
 263     case 0x00:  /* Load single/multiple sector data unit into buffer */
 264         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 265
 266         SETBUF_M()
 267         if (onenand_load_main(s, sec, s->count, buf))
 268             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 269
 270 #if 0
 271         SETBUF_S()
 272         if (onenand_load_spare(s, sec, s->count, buf))
 273             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 274 #endif
 275
 276         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 277          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 278          * then we need two split the read/write into two chunks.
 279          */
 280         s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
 281         break;
 282     case 0x13:  /* Load single/multiple spare sector into buffer */
 283         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 284
 285         SETBUF_S()
 286         if (onenand_load_spare(s, sec, s->count, buf))
 287             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 288
 289         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 290          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 291          * then we need two split the read/write into two chunks.
 292          */
 293         s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
 294         break;
 295     case 0x80:  /* Program single/multiple sector data unit from buffer */
 296         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 297
 298         SETBUF_M()
 299         if (onenand_prog_main(s, sec, s->count, buf))
 300             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 301
 302 #if 0
 303         SETBUF_S()
 304         if (onenand_prog_spare(s, sec, s->count, buf))
 305             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 306 #endif
 307
 308         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 309          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 310          * then we need two split the read/write into two chunks.
 311          */
 312         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 313         break;
 314     case 0x1a:  /* Program single/multiple spare area sector from buffer */
 315         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 316
 317         SETBUF_S()
 318         if (onenand_prog_spare(s, sec, s->count, buf))
 319             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 320
 321         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 322          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 323          * then we need two split the read/write into two chunks.
 324          */
 325         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 326         break;
 327     case 0x1b:  /* Copy-back program */
 328         SETBUF_S()
 329
 330         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 331         if (onenand_load_main(s, sec, s->count, buf))
 332             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 333
 334         SETADDR(ONEN_BUF_DEST_BLOCK, ONEN_BUF_DEST_PAGE)
 335         if (onenand_prog_main(s, sec, s->count, buf))
 336             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 337
 338         /* TODO: spare areas */
 339
 340         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 341         break;
 342
 343     case 0x23:  /* Unlock NAND array block(s) */
 344         s->intstatus |= ONEN_INT;
 345
 346         /* XXX the previous (?) area should be locked automatically */
 347         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 348             if (b >= s->blocks) {
 349                 s->status |= ONEN_ERR_CMD;
 350                 break;
 351             }
 352             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 353                 break;
 354
 355             s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
 356         }
 357         break;
 358     case 0x27:  /* Unlock All NAND array blocks */
 359         s->intstatus |= ONEN_INT;
 360
 361         for (b = 0; b < s->blocks; b ++) {
 362             if (b >= s->blocks) {
 363                 s->status |= ONEN_ERR_CMD;
 364                 break;
 365             }
 366             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 367                 break;
 368
 369             s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
 370         }
 371         break;
 372
 373     case 0x2a:  /* Lock NAND array block(s) */
 374         s->intstatus |= ONEN_INT;
 375
 376         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 377             if (b >= s->blocks) {
 378                 s->status |= ONEN_ERR_CMD;
 379                 break;
 380             }
 381             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 382                 break;
 383
 384             s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKED;
 385         }
 386         break;
 387     case 0x2c:  /* Lock-tight NAND array block(s) */
 388         s->intstatus |= ONEN_INT;
 389
 390         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 391             if (b >= s->blocks) {
 392                 s->status |= ONEN_ERR_CMD;
 393                 break;
 394             }
 395             if (s->blockwp[b] == ONEN_LOCK_UNLOCKED)
 396                 continue;
 397
 398             s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKTIGHTEN;
 399         }
 400         break;
 401
 402     case 0x71:  /* Erase-Verify-Read */
 403         s->intstatus |= ONEN_INT;
 404         break;
 405     case 0x95:  /* Multi-block erase */
 406         qemu_irq_pulse(s->intr);
 407         /* Fall through.  */
 408     case 0x94:  /* Block erase */
 409         sec = ((s->addr[ONEN_BUF_BLOCK] & 0xfff) |
 410                         (s->addr[ONEN_BUF_BLOCK] >> 15 ? s->density_mask : 0))
 411                 << (BLOCK_SHIFT - 9);
 412         if (onenand_erase(s, sec, 1 << (BLOCK_SHIFT - 9)))
 413             s->status |= ONEN_ERR_CMD | ONEN_ERR_ERASE;
 414
 415         s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
 416         break;
 417     case 0xb0:  /* Erase suspend */
 418         break;
 419     case 0x30:  /* Erase resume */
 420         s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
 421         break;
 422
 423     case 0xf0:  /* Reset NAND Flash core */
 424         onenand_reset(s, 0);
 425         break;
 426     case 0xf3:  /* Reset OneNAND */
 427         onenand_reset(s, 0);
 428         break;
 429
 430     case 0x65:  /* OTP Access */
 431         s->intstatus |= ONEN_INT;
 432         s->bdrv_cur = 0;
 433         s->current = s->otp;
 434         s->secs_cur = 1 << (BLOCK_SHIFT - 9);
 435         s->addr[ONEN_BUF_BLOCK] = 0;
 436         s->otpmode = 1;
 437         break;
 438
 439     default:
 440         s->status |= ONEN_ERR_CMD;
 441         s->intstatus |= ONEN_INT;
 442         fprintf(stderr, "%s: unknown OneNAND command %x\n",
 443                         __FUNCTION__, cmd);
 444     }
 445
 446     onenand_intr_update(s);
 447 }
 448
 449 static uint32_t onenand_read(void *opaque, target_phys_addr_t addr)
 450 {
 451     struct onenand_s *s = (struct onenand_s *) opaque;
 452     int offset = addr >> s->shift;
 453
 454     switch (offset) {
 455     case 0x0000 ... 0xc000:
 456         return lduw_le_p(s->boot[0] + addr);
 457
 458     case 0xf000:        /* Manufacturer ID */
 459         return (s->id >> 16) & 0xff;
 460     case 0xf001:        /* Device ID */
 461         return (s->id >>  8) & 0xff;
 462     /* TODO: get the following values from a real chip!  */
 463     case 0xf002:        /* Version ID */
 464         return (s->id >>  0) & 0xff;
 465     case 0xf003:        /* Data Buffer size */
 466         return 1 << PAGE_SHIFT;
 467     case 0xf004:        /* Boot Buffer size */
 468         return 0x200;
 469     case 0xf005:        /* Amount of buffers */
 470         return 1 | (2 << 8);
 471     case 0xf006:        /* Technology */
 472         return 0;
 473
 474     case 0xf100 ... 0xf107:     /* Start addresses */
 475         return s->addr[offset - 0xf100];
 476
 477     case 0xf200:        /* Start buffer */
 478         return (s->bufaddr << 8) | ((s->count - 1) & (1 << (PAGE_SHIFT - 10)));
 479
 480     case 0xf220:        /* Command */
 481         return s->command;
 482     case 0xf221:        /* System Configuration 1 */
 483         return s->config[0] & 0xffe0;
 484     case 0xf222:        /* System Configuration 2 */
 485         return s->config[1];
 486
 487     case 0xf240:        /* Controller Status */
 488         return s->status;
 489     case 0xf241:        /* Interrupt */
 490         return s->intstatus;
 491     case 0xf24c:        /* Unlock Start Block Address */
 492         return s->unladdr[0];
 493     case 0xf24d:        /* Unlock End Block Address */
 494         return s->unladdr[1];
 495     case 0xf24e:        /* Write Protection Status */
 496         return s->wpstatus;
 497
 498     case 0xff00:        /* ECC Status */
 499         return 0x00;
 500     case 0xff01:        /* ECC Result of main area data */
 501     case 0xff02:        /* ECC Result of spare area data */
 502     case 0xff03:        /* ECC Result of main area data */
 503     case 0xff04:        /* ECC Result of spare area data */
 504         cpu_abort(cpu_single_env, "%s: imeplement ECC\n", __FUNCTION__);
 505         return 0x0000;
 506     }
 507
 508     fprintf(stderr, "%s: unknown OneNAND register %x\n",
 509                     __FUNCTION__, offset);
 510     return 0;
 511 }
 512
 513 static void onenand_write(void *opaque, target_phys_addr_t addr,
 514                 uint32_t value)
 515 {
 516     struct onenand_s *s = (struct onenand_s *) opaque;
 517     int offset = addr >> s->shift;
 518     int sec;
 519
 520     switch (offset) {
 521     case 0x0000 ... 0x01ff:
 522     case 0x8000 ... 0x800f:
 523         if (s->cycle) {
 524             s->cycle = 0;
 525
 526             if (value == 0x0000) {
 527                 SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 528                 onenand_load_main(s, sec,
 529                                 1 << (PAGE_SHIFT - 9), s->data[0][0]);
 530                 s->addr[ONEN_BUF_PAGE] += 4;
 531                 s->addr[ONEN_BUF_PAGE] &= 0xff;
 532             }
 533             break;
 534         }
 535
 536         switch (value) {
 537         case 0x00f0:    /* Reset OneNAND */
 538             onenand_reset(s, 0);
 539             break;
 540
 541         case 0x00e0:    /* Load Data into Buffer */
 542             s->cycle = 1;
 543             break;
 544
 545         case 0x0090:    /* Read Identification Data */
 546             memset(s->boot[0], 0, 3 << s->shift);
 547             s->boot[0][0 << s->shift] = (s->id >> 16) & 0xff;
 548             s->boot[0][1 << s->shift] = (s->id >>  8) & 0xff;
 549             s->boot[0][2 << s->shift] = s->wpstatus & 0xff;
 550             break;
 551
 552         default:
 553             fprintf(stderr, "%s: unknown OneNAND boot command %x\n",
 554                             __FUNCTION__, value);
 555         }
 556         break;
 557
 558     case 0xf100 ... 0xf107:     /* Start addresses */
 559         s->addr[offset - 0xf100] = value;
 560         break;
 561
 562     case 0xf200:        /* Start buffer */
 563         s->bufaddr = (value >> 8) & 0xf;
 564         if (PAGE_SHIFT == 11)
 565             s->count = (value & 3) ?: 4;
 566         else if (PAGE_SHIFT == 10)
 567             s->count = (value & 1) ?: 2;
 568         break;
 569
 570     case 0xf220:        /* Command */
 571         if (s->intstatus & (1 << 15))
 572             break;
 573         s->command = value;
 574         onenand_command(s, s->command);
 575         break;
 576     case 0xf221:        /* System Configuration 1 */
 577         s->config[0] = value;
 578         onenand_intr_update(s);
 579         qemu_set_irq(s->rdy, (s->config[0] >> 7) & 1);
 580         break;
 581     case 0xf222:        /* System Configuration 2 */
 582         s->config[1] = value;
 583         break;
 584
 585     case 0xf241:        /* Interrupt */
 586         s->intstatus &= value;
 587         if ((1 << 15) & ~s->intstatus)
 588             s->status &= ~(ONEN_ERR_CMD | ONEN_ERR_ERASE |
 589                             ONEN_ERR_PROG | ONEN_ERR_LOAD);
 590         onenand_intr_update(s);
 591         break;
 592     case 0xf24c:        /* Unlock Start Block Address */
 593         s->unladdr[0] = value & (s->blocks - 1);
 594         /* For some reason we have to set the end address to by default
 595          * be same as start because the software forgets to write anything
 596          * in there.  */
 597         s->unladdr[1] = value & (s->blocks - 1);
 598         break;
 599     case 0xf24d:        /* Unlock End Block Address */
 600         s->unladdr[1] = value & (s->blocks - 1);
 601         break;
 602
 603     default:
 604         fprintf(stderr, "%s: unknown OneNAND register %x\n",
 605                         __FUNCTION__, offset);
 606     }
 607 }
 608
 609 static CPUReadMemoryFunc *onenand_readfn[] = {
 610     onenand_read,       /* TODO */
 611     onenand_read,
 612     onenand_read,
 613 };
 614
 615 static CPUWriteMemoryFunc *onenand_writefn[] = {
 616     onenand_write,      /* TODO */
 617     onenand_write,
 618     onenand_write,
 619 };
 620
 621 void *onenand_init(uint32_t id, int regshift, qemu_irq irq)
 622 {
 623     struct onenand_s *s = (struct onenand_s *) qemu_mallocz(sizeof(*s));
 624     int bdrv_index = drive_get_index(IF_MTD, 0, 0);
 625     uint32_t size = 1 << (24 + ((id >> 12) & 7));
 626     void *ram;
 627
 628     s->shift = regshift;
 629     s->intr = irq;
 630     s->rdy = 0;
 631     s->id = id;
 632     s->blocks = size >> BLOCK_SHIFT;
 633     s->secs = size >> 9;
 634     s->blockwp = qemu_malloc(s->blocks);
 635     s->density_mask = (id & (1 << 11)) ? (1 << (6 + ((id >> 12) & 7))) : 0;
 636     s->iomemtype = cpu_register_io_memory(0, onenand_readfn,
 637                     onenand_writefn, s);
 638     if (bdrv_index == -1)
 639         s->image = memset(qemu_malloc(size + (size >> 5)),
 640                         0xff, size + (size >> 5));
 641     else
 642         s->bdrv = drives_table[bdrv_index].bdrv;
 643     s->otp = memset(qemu_malloc((64 + 2) << PAGE_SHIFT),
 644                     0xff, (64 + 2) << PAGE_SHIFT);
 645     s->ram = qemu_ram_alloc(0xc000 << s->shift);
 646     ram = phys_ram_base + s->ram;
 647     s->boot[0] = ram + (0x0000 << s->shift);
 648     s->boot[1] = ram + (0x8000 << s->shift);
 649     s->data[0][0] = ram + ((0x0200 + (0 << (PAGE_SHIFT - 1))) << s->shift);
 650     s->data[0][1] = ram + ((0x8010 + (0 << (PAGE_SHIFT - 6))) << s->shift);
 651     s->data[1][0] = ram + ((0x0200 + (1 << (PAGE_SHIFT - 1))) << s->shift);
 652     s->data[1][1] = ram + ((0x8010 + (1 << (PAGE_SHIFT - 6))) << s->shift);
 653
 654     onenand_reset(s, 1);
 655
 656     return s;
 657 }
 658
 659 void *onenand_raw_otp(void *opaque)
 660 {
 661     struct onenand_s *s = (struct onenand_s *) opaque;
 662
 663     return s->otp;
 664 }