hw/usb.h

   1 /*
   2  * QEMU USB API
   3  *
   4  * Copyright (c) 2005 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24 #define USB_TOKEN_SETUP 0x2d
  25 #define USB_TOKEN_IN    0x69 /* device -> host */
  26 #define USB_TOKEN_OUT   0xe1 /* host -> device */
  27
  28 /* specific usb messages, also sent in the 'pid' parameter */
  29 #define USB_MSG_ATTACH   0x100
  30 #define USB_MSG_DETACH   0x101
  31 #define USB_MSG_RESET    0x102
  32
  33 #define USB_RET_NODEV  (-1)
  34 #define USB_RET_NAK    (-2)
  35 #define USB_RET_STALL  (-3)
  36 #define USB_RET_BABBLE (-4)
  37 #define USB_RET_ASYNC  (-5)
  38
  39 #define USB_SPEED_LOW   0
  40 #define USB_SPEED_FULL  1
  41 #define USB_SPEED_HIGH  2
  42
  43 #define USB_STATE_NOTATTACHED 0
  44 #define USB_STATE_ATTACHED    1
  45 //#define USB_STATE_POWERED     2
  46 #define USB_STATE_DEFAULT     3
  47 //#define USB_STATE_ADDRESS     4
  48 //#define       USB_STATE_CONFIGURED  5
  49 #define USB_STATE_SUSPENDED   6
  50
  51 #define USB_CLASS_AUDIO                 1
  52 #define USB_CLASS_COMM                  2
  53 #define USB_CLASS_HID                   3
  54 #define USB_CLASS_PHYSICAL              5
  55 #define USB_CLASS_STILL_IMAGE           6
  56 #define USB_CLASS_PRINTER               7
  57 #define USB_CLASS_MASS_STORAGE          8
  58 #define USB_CLASS_HUB                   9
  59 #define USB_CLASS_CDC_DATA              0x0a
  60 #define USB_CLASS_CSCID                 0x0b
  61 #define USB_CLASS_CONTENT_SEC           0x0d
  62 #define USB_CLASS_APP_SPEC              0xfe
  63 #define USB_CLASS_VENDOR_SPEC           0xff
  64
  65 #define USB_DIR_OUT                     0
  66 #define USB_DIR_IN                      0x80
  67
  68 #define USB_TYPE_MASK                   (0x03 << 5)
  69 #define USB_TYPE_STANDARD               (0x00 << 5)
  70 #define USB_TYPE_CLASS                  (0x01 << 5)
  71 #define USB_TYPE_VENDOR                 (0x02 << 5)
  72 #define USB_TYPE_RESERVED               (0x03 << 5)
  73
  74 #define USB_RECIP_MASK                  0x1f
  75 #define USB_RECIP_DEVICE                0x00
  76 #define USB_RECIP_INTERFACE             0x01
  77 #define USB_RECIP_ENDPOINT              0x02
  78 #define USB_RECIP_OTHER                 0x03
  79
  80 #define DeviceRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
  81 #define DeviceOutRequest ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
  82 #define InterfaceRequest \
  83         ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
  84 #define InterfaceOutRequest \
  85         ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
  86 #define EndpointRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
  87 #define EndpointOutRequest \
  88         ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
  89
  90 #define USB_REQ_GET_STATUS              0x00
  91 #define USB_REQ_CLEAR_FEATURE           0x01
  92 #define USB_REQ_SET_FEATURE             0x03
  93 #define USB_REQ_SET_ADDRESS             0x05
  94 #define USB_REQ_GET_DESCRIPTOR          0x06
  95 #define USB_REQ_SET_DESCRIPTOR          0x07
  96 #define USB_REQ_GET_CONFIGURATION       0x08
  97 #define USB_REQ_SET_CONFIGURATION       0x09
  98 #define USB_REQ_GET_INTERFACE           0x0A
  99 #define USB_REQ_SET_INTERFACE           0x0B
 100 #define USB_REQ_SYNCH_FRAME             0x0C
 101
 102 #define USB_DEVICE_SELF_POWERED         0
 103 #define USB_DEVICE_REMOTE_WAKEUP        1
 104
 105 #define USB_DT_DEVICE                   0x01
 106 #define USB_DT_CONFIG                   0x02
 107 #define USB_DT_STRING                   0x03
 108 #define USB_DT_INTERFACE                0x04
 109 #define USB_DT_ENDPOINT                 0x05
 110
 111 #define USB_ENDPOINT_XFER_CONTROL       0
 112 #define USB_ENDPOINT_XFER_ISOC          1
 113 #define USB_ENDPOINT_XFER_BULK          2
 114 #define USB_ENDPOINT_XFER_INT           3
 115
 116 typedef struct USBPort USBPort;
 117 typedef struct USBDevice USBDevice;
 118 typedef struct USBPacket USBPacket;
 119
 120 /* definition of a USB device */
 121 struct USBDevice {
 122     void *opaque;
 123     int (*handle_packet)(USBDevice *dev, USBPacket *p);
 124     void (*handle_destroy)(USBDevice *dev);
 125
 126     int speed;
 127
 128     /* The following fields are used by the generic USB device
 129        layer. They are here just to avoid creating a new structure for
 130        them. */
 131     void (*handle_reset)(USBDevice *dev);
 132     int (*handle_control)(USBDevice *dev, int request, int value,
 133                           int index, int length, uint8_t *data);
 134     int (*handle_data)(USBDevice *dev, USBPacket *p);
 135     uint8_t addr;
 136     char devname[32];
 137
 138     int state;
 139     uint8_t setup_buf[8];
 140     uint8_t data_buf[1024];
 141     int remote_wakeup;
 142     int setup_state;
 143     int setup_len;
 144     int setup_index;
 145 };
 146
 147 typedef void (*usb_attachfn)(USBPort *port, USBDevice *dev);
 148
 149 /* USB port on which a device can be connected */
 150 struct USBPort {
 151     USBDevice *dev;
 152     usb_attachfn attach;
 153     void *opaque;
 154     int index; /* internal port index, may be used with the opaque */
 155     struct USBPort *next; /* Used internally by qemu.  */
 156 };
 157
 158 typedef void USBCallback(USBPacket * packet, void *opaque);
 159
 160 /* Structure used to hold information about an active USB packet.  */
 161 struct USBPacket {
 162     /* Data fields for use by the driver.  */
 163     int pid;
 164     uint8_t devaddr;
 165     uint8_t devep;
 166     uint8_t *data;
 167     int len;
 168     /* Internal use by the USB layer.  */
 169     USBCallback *complete_cb;
 170     void *complete_opaque;
 171     USBCallback *cancel_cb;
 172     void *cancel_opaque;
 173 };
 174
 175 /* Defer completion of a USB packet.  The hadle_packet routine should then
 176    return USB_RET_ASYNC.  Packets that complete immediately (before
 177    handle_packet returns) should not call this method.  */
 178 static inline void usb_defer_packet(USBPacket *p, USBCallback *cancel,
 179                                     void * opaque)
 180 {
 181     p->cancel_cb = cancel;
 182     p->cancel_opaque = opaque;
 183 }
 184
 185 /* Notify the controller that an async packet is complete.  This should only
 186    be called for packets previously deferred with usb_defer_packet, and
 187    should never be called from within handle_packet.  */
 188 static inline void usb_packet_complete(USBPacket *p)
 189 {
 190     p->complete_cb(p, p->complete_opaque);
 191 }
 192
 193 /* Cancel an active packet.  The packed must have been deferred with
 194    usb_defer_packet,  and not yet completed.  */
 195 static inline void usb_cancel_packet(USBPacket * p)
 196 {
 197     p->cancel_cb(p, p->cancel_opaque);
 198 }
 199
 200 void usb_attach(USBPort *port, USBDevice *dev);
 201 int usb_generic_handle_packet(USBDevice *s, USBPacket *p);
 202 int set_usb_string(uint8_t *buf, const char *str);
 203 void usb_send_msg(USBDevice *dev, int msg);
 204
 205 void usb_packet_complete(USBPacket *p);
 206
 207 /* usb hub */
 208 USBDevice *usb_hub_init(int nb_ports);
 209
 210 /* usb-linux.c */
 211 USBDevice *usb_host_device_open(const char *devname);
 212 void usb_host_info(void);
 213
 214 /* usb-hid.c */
 215 USBDevice *usb_mouse_init(void);
 216 USBDevice *usb_tablet_init(void);
 217 USBDevice *usb_keyboard_init(void);
 218
 219 /* usb-msd.c */
 220 USBDevice *usb_msd_init(const char *filename);
 221
 222 /* usb-net.c */
 223 USBDevice *usb_net_init(NICInfo *nd);
 224
 225 /* usb-wacom.c */
 226 USBDevice *usb_wacom_init(void);
 227
 228 /* usb-serial.c */
 229 USBDevice *usb_serial_init(const char *filename);
 230
 231 /* usb ports of the VM */
 232
 233 void qemu_register_usb_port(USBPort *port, void *opaque, int index,
 234                             usb_attachfn attach);
 235
 236 #define VM_USB_HUB_SIZE 8
 237
 238 /* usb-musb.c */
 239 enum musb_irq_source_e {
 240     musb_irq_suspend = 0,
 241     musb_irq_resume,
 242     musb_irq_rst_babble,
 243     musb_irq_sof,
 244     musb_irq_connect,
 245     musb_irq_disconnect,
 246     musb_irq_vbus_request,
 247     musb_irq_vbus_error,
 248     musb_irq_rx,
 249     musb_irq_tx,
 250     musb_set_vbus,
 251     musb_set_session,
 252     __musb_irq_max,
 253 };
 254
 255 struct musb_s;
 256 struct musb_s *musb_init(qemu_irq *irqs);
 257 uint32_t musb_core_intr_get(struct musb_s *s);
 258 void musb_core_intr_clear(struct musb_s *s, uint32_t mask);
 259 void musb_set_size(struct musb_s *s, int epnum, int size, int is_tx);