hw/mini2440.c

   1 /*
   2  * mini2440 development board support
   3  *
   4  * Copyright Michel Pollet <buserror@gmail.com>
   5  *
   6  * This code is licensed under the GNU GPL v2.
   7  */
   8
   9 #include "hw.h"
  10 #include "s3c.h"
  11 #include "arm-misc.h"
  12 #include "sysemu.h"
  13 #include "i2c.h"
  14 #include "qemu-timer.h"
  15 #include "devices.h"
  16 #include "audio/audio.h"
  17 #include "boards.h"
  18 #include "console.h"
  19 #include "usb.h"
  20 #include "net.h"
  21 #include "sd.h"
  22 #include "dm9000.h"
  23 #include "eeprom24c0x.h"
  24
  25 #define mini2440_printf(format, ...)    \
  26     fprintf(stderr, "%s: " format, __FUNCTION__, ##__VA_ARGS__)
  27
  28 #define MINI2440_GPIO_BACKLIGHT         S3C_GPG(4)
  29 #define MINI2440_GPIO_LCD_RESET         S3C_GPC(6)
  30 #define MINI2440_GPIO_nSD_DETECT        S3C_GPG(8)
  31 #define MINI2440_GPIO_WP_SD                     S3C_GPH(8)
  32 #define MINI2440_GPIO_DM9000            S3C_GPF(7)
  33 #define MINI2440_GPIO_USB_PULLUP        S3C_GPC(5)
  34
  35 #define MINI2440_IRQ_nSD_DETECT         S3C_EINT(16)
  36 #define MINI2440_IRQ_DM9000                     S3C_EINT(7)
  37
  38 /*
  39 #define MINI2440_GPIO_SDMMC_ON          S3C_GPB(2)
  40 #define MINI2440_GPIO_USB_ATTACH        S3C_GPB(10)
  41 */
  42
  43 struct mini2440_board_s {
  44     struct s3c_state_s *cpu;
  45     unsigned int ram;
  46     struct ee24c08_s * eeprom;
  47     const char * kernel;
  48     SDState * mmc;
  49     struct nand_flash_s *nand;
  50     int bl_level;
  51 };
  52
  53 /*
  54  * the 24c08 sits on 4 addresses on the bus, and uses the lower address bits
  55  * to address the 256 byte "page" of the eeprom. We thus need to use 4 i2c_slaves
  56  * and keep track of which one was used to set the read/write pointer into the data
  57  */
  58 struct ee24c08_s;
  59 struct ee24c08_slave_s {
  60         i2c_slave slave;
  61         struct ee24c08_s * eeprom;
  62         uint8_t page;
  63 };
  64 struct ee24c08_s {
  65         /* that memory takes 4 addresses */
  66         struct ee24c08_slave_s * slave[4];
  67         uint16_t ptr;
  68         uint16_t count;
  69         uint8_t data[1024];
  70 };
  71
  72 static void ee24c08_event(i2c_slave *i2c, enum i2c_event event)
  73 {
  74     struct ee24c08_slave_s *s = (struct ee24c08_slave_s *) i2c;
  75
  76     s->eeprom->ptr = s->page * 256;
  77     s->eeprom->count = 0;
  78 }
  79
  80 static int ee24c08_tx(i2c_slave *i2c, uint8_t data)
  81 {
  82     struct ee24c08_slave_s *s = (struct ee24c08_slave_s *) i2c;
  83     if (s->eeprom->count++ == 0) {
  84         /* first byte is address offset */
  85         s->eeprom->ptr = (s->page * 256) + data;
  86     } else {
  87         printf("%s: write %04x=%02x\n", __FUNCTION__, s->eeprom->ptr, data);
  88         s->eeprom->data[s->eeprom->ptr] = data;
  89         s->eeprom->ptr = (s->eeprom->ptr & ~0xff) | ((s->eeprom->ptr + 1) & 0xff);
  90         s->eeprom->count++;
  91     }
  92     return 0;
  93 }
  94
  95 static int ee24c08_rx(i2c_slave *i2c)
  96 {
  97     struct ee24c08_slave_s *s = (struct ee24c08_slave_s *) i2c;
  98     uint8_t res =  s->eeprom->data[s->eeprom->ptr];
  99
 100     s->eeprom->ptr = (s->eeprom->ptr & ~0xff) | ((s->eeprom->ptr + 1) & 0xff);
 101     s->eeprom->count++;
 102     return res;
 103 }
 104
 105 static void ee24c08_save(QEMUFile *f, void *opaque)
 106 {
 107         struct ee24c08_s *s = (struct ee24c08_s *) opaque;
 108         int i;
 109
 110     qemu_put_be16s(f, &s->ptr);
 111     qemu_put_be16s(f, &s->count);
 112     qemu_put_buffer(f, s->data, sizeof(s->data));
 113
 114         for (i = 0; i < 4; i++)
 115                 i2c_slave_save(f, &s->slave[i]->slave);
 116 }
 117
 118 static int ee24c08_load(QEMUFile *f, void *opaque, int version_id)
 119 {
 120         struct ee24c08_s *s = (struct ee24c08_s *) opaque;
 121         int i;
 122
 123     qemu_get_be16s(f, &s->ptr);
 124     qemu_get_be16s(f, &s->count);
 125     qemu_get_buffer(f, s->data, sizeof(s->data));
 126
 127         for (i = 0; i < 4; i++)
 128                 i2c_slave_load(f, &s->slave[i]->slave);
 129     return 0;
 130 }
 131
 132 static struct ee24c08_s * ee24c08_init(i2c_bus *bus)
 133 {
 134     struct ee24c08_s *s = (struct ee24c08_s *)
 135             qemu_mallocz(sizeof(struct ee24c08_s));
 136         int i = 0;
 137         memset(s->data, 0xff, sizeof(s->data));
 138
 139         for (i = 0; i < 4; i++) {
 140                 struct ee24c08_slave_s * ss = (struct ee24c08_slave_s *)
 141                         i2c_slave_init(bus, 0x50 + i, sizeof(struct ee24c08_slave_s));
 142                 ss->slave.event = ee24c08_event;
 143                 ss->slave.recv = ee24c08_rx;
 144                 ss->slave.send = ee24c08_tx;
 145                 ss->page = i;
 146                 ss->eeprom = s;
 147                 s->slave[i] = ss;
 148         }
 149     register_savevm("ee24c08", -1, 0, ee24c08_save, ee24c08_load, s);
 150         return s;
 151 }
 152
 153
 154 /* Handlers for output ports */
 155 static void mini2440_bl_switch(void *opaque, int line, int level)
 156 {
 157         printf("%s: LCD Backlight now %s.\n", __FUNCTION__, level ? "on" : "off");
 158 }
 159
 160 static void mini2440_bl_intensity(int line, int level, void *opaque)
 161 {
 162     struct mini2440_board_s *s = (struct mini2440_board_s *) opaque;
 163
 164     if ((level >> 8) != s->bl_level) {
 165         s->bl_level = level >> 8;
 166         printf("%s: LCD Backlight now at %04x\n", __FUNCTION__, s->bl_level);
 167     }
 168 }
 169
 170 static void mini2440_gpio_setup(struct mini2440_board_s *s)
 171 {
 172         /* set the "input" pin values */
 173         s3c_gpio_set_dat(s->cpu->io, S3C_GPG(13), 1);
 174         s3c_gpio_set_dat(s->cpu->io, S3C_GPG(14), 1);
 175         s3c_gpio_set_dat(s->cpu->io, S3C_GPG(15), 0);
 176
 177     s3c_gpio_out_set(s->cpu->io, MINI2440_GPIO_BACKLIGHT,
 178                     *qemu_allocate_irqs(mini2440_bl_switch, s, 1));
 179
 180     s3c_timers_cmp_handler_set(s->cpu->timers, 1, mini2440_bl_intensity, s);
 181
 182     /* Register the SD card pins to the lower SD driver */
 183         sd_set_cb(s->mmc,
 184                         s3c_gpio_in_get(s->cpu->io)[MINI2440_GPIO_WP_SD],
 185                         qemu_irq_invert(s3c_gpio_in_get(s->cpu->io)[MINI2440_IRQ_nSD_DETECT]));
 186
 187 }
 188
 189 #if 0
 190 static void hexdump(const void* address, uint32_t len)
 191 {
 192     const unsigned char* p = address;
 193     int i, j;
 194
 195     for (i = 0; i < len; i += 16) {
 196         for (j = 0; j < 16 && i + j < len; j++)
 197             fprintf(stderr, "%02x ", p[i + j]);
 198         for (; j < 16; j++)
 199             fprintf(stderr, "   ");
 200         fprintf(stderr, " ");
 201         for (j = 0; j < 16 && i + j < len; j++)
 202             fprintf(stderr, "%c", (p[i + j] < ' ' || p[i + j] > 0x7f) ? '.' : p[i + j]);
 203         fprintf(stderr, "\n");
 204     }
 205 }
 206 #endif
 207
 208 static int mini2440_load_from_nand(struct nand_flash_s *nand,
 209                 uint32_t nand_offset, uint32_t s3c_base_offset, uint32_t size)
 210 {
 211         uint8_t buffer[512];
 212         uint32_t src = 0;
 213         int page = 0;
 214         uint32_t dst = 0;
 215
 216         if (!nand)
 217                 return 0;
 218
 219         for (page = 0; page < (size / 512); page++, src += 512 + 16, dst += 512)
 220                 if (nand_readraw(nand, nand_offset + src, buffer, 512) == 0) {
 221                         fprintf(stderr, "%s: failed to load nand %d:%d\n", __FUNCTION__,
 222                                 nand_offset + src, 512 + 16);
 223                         return 0;
 224                 } else
 225                         cpu_physical_memory_write(s3c_base_offset + dst, buffer, 512);
 226         return (int) size;
 227 }
 228
 229 static void mini2440_reset(void *opaque)
 230 {
 231     struct mini2440_board_s *s = (struct mini2440_board_s *) opaque;
 232     uint32_t image_size;
 233
 234         /*
 235          * Normally we would load 4 KB of nand to SRAM and jump there, but
 236          * it is not working perfectly as expected, so we cheat and load
 237          * it from nand directly relocated to 0x33f80000 and jump there
 238          */
 239         if (mini2440_load_from_nand(s->nand, 0, S3C_RAM_BASE | 0x03f80000, 256*1024)> 0) {
 240                 fprintf(stderr, "%s: loaded default u-boot from NAND\n", __FUNCTION__);
 241                 s->cpu->env->regs[15] = S3C_RAM_BASE | 0x03f80000; /* start address, u-boot already relocated */
 242         }
 243 #if 0 && defined(LATER)
 244         if (mini2440_load_from_nand(s->nand, 0, S3C_SRAM_BASE_NANDBOOT, S3C_SRAM_SIZE) > 0) {
 245             s->cpu->env->regs[15] = S3C_SRAM_BASE_NANDBOOT;     /* start address, u-boot relocating code */
 246             fprintf(stderr, "%s: 4KB SteppingStone loaded from NAND\n", __FUNCTION__);
 247         }
 248 #endif
 249         /*
 250          * if a u--boot is available as a file, we always use it
 251          */
 252         {
 253             image_size = load_image("mini2440/u-boot.bin", phys_ram_base + 0x03f80000);
 254             if (image_size < 0)
 255                     image_size = load_image("u-boot.bin", phys_ram_base + 0x03f80000);
 256                 if (image_size > 0) {
 257                         if (image_size & (512 -1))      /* round size to a NAND block size */
 258                                 image_size = (image_size + 512) & ~(512-1);
 259                 fprintf(stderr, "%s: loaded override u-boot (size %x)\n", __FUNCTION__, image_size);
 260                     s->cpu->env->regs[15] = S3C_RAM_BASE | 0x03f80000;  /* start address, u-boot already relocated */
 261                 }
 262         }
 263         /*
 264          * if a kernel was explicitly specified, we load it too
 265          */
 266         if (s->kernel) {
 267                 image_size = load_image(s->kernel, phys_ram_base + 0x02000000);
 268                 if (image_size > 0) {
 269                         if (image_size & (512 -1))      /* round size to a NAND block size */
 270                                 image_size = (image_size + 512) & ~(512-1);
 271                 fprintf(stderr, "%s: loaded %s (size %x)\n", __FUNCTION__, s->kernel, image_size);
 272             }
 273         }
 274 }
 275
 276 /* Typical touchscreen calibration values */
 277 static const int mini2440_ts_scale[6] = {
 278     0, (90 - 960) * 256 / 1021, -90 * 256 * 32,
 279     (940 - 75) * 256 / 1021, 0, 75 * 256 * 32,
 280 };
 281
 282 /* Board init.  */
 283 static struct mini2440_board_s *mini2440_init_common(int ram_size,
 284                 const char *kernel_filename, const char *cpu_model,
 285                 SDState *mmc)
 286 {
 287     struct mini2440_board_s *s = (struct mini2440_board_s *)
 288             qemu_mallocz(sizeof(struct mini2440_board_s));
 289
 290     s->ram = 0x04000000;
 291     s->kernel = kernel_filename;
 292     s->mmc = mmc;
 293
 294     /* Setup CPU & memory */
 295     if (ram_size < s->ram + S3C_SRAM_SIZE) {
 296         fprintf(stderr, "This platform requires %i bytes of memory (not %d)\n",
 297                         s->ram + S3C_SRAM_SIZE, ram_size);
 298         exit(1);
 299     }
 300     if (cpu_model && strcmp(cpu_model, "arm920t")) {
 301         fprintf(stderr, "This platform requires an ARM920T core\n");
 302         exit(2);
 303     }
 304     s->cpu = s3c24xx_init(S3C_CPU_2440, 12000000 /* 12 mhz */, s->ram, S3C_SRAM_BASE_NANDBOOT, s->mmc);
 305
 306     /* Setup peripherals */
 307     mini2440_gpio_setup(s);
 308
 309         s->eeprom = ee24c08_init(s3c_i2c_bus(s->cpu->i2c));
 310
 311         {
 312                 NICInfo* nd;
 313                 nd = &nd_table[0];
 314                 if (!nd->model)
 315                     nd->model = "dm9000";
 316                 if (strcmp(nd->model, "dm9000") == 0) {
 317                         dm9000_init(nd, 0x20000000, 0x300, 0x304, s3c_gpio_in_get(s->cpu->io)[MINI2440_IRQ_DM9000]);
 318                 }
 319         }
 320
 321     s3c_adc_setscale(s->cpu->adc, mini2440_ts_scale);
 322
 323     /* Setup initial (reset) machine state */
 324     qemu_register_reset(mini2440_reset, s);
 325 #if 0
 326     arm_load_kernel(s->ram, kernel_filename, kernel_cmdline,
 327                     initrd_filename, 0x49e, S3C_RAM_BASE);
 328 #endif
 329
 330     return s;
 331 }
 332
 333 static void mini2440_init(ram_addr_t ram_size, int vga_ram_size,
 334                 const char *boot_device,
 335                 const char *kernel_filename, const char *kernel_cmdline,
 336                 const char *initrd_filename, const char *cpu_model)
 337 {
 338     struct mini2440_board_s *mini;
 339     int sd_idx = drive_get_index(IF_SD, 0, 0);
 340     SDState *sd = 0;
 341
 342     if (sd_idx >= 0)
 343         sd = sd_init(drives_table[sd_idx].bdrv, 0);
 344
 345     mini = mini2440_init_common(ram_size,
 346                     kernel_filename, cpu_model, sd);
 347
 348         mini->nand = nand_init(NAND_MFR_SAMSUNG, 0x76);
 349     mini->cpu->nand->reg(mini->cpu->nand, mini->nand);
 350
 351     mini2440_reset(mini);
 352 }
 353
 354 QEMUMachine mini2440_machine = {
 355     "mini2440",
 356     "MINI2440 Chinese Samsung SoC dev board (S3C2440A)",
 357     .init = mini2440_init,
 358     .ram_require = (0x04000000 + S3C_SRAM_SIZE) | RAMSIZE_FIXED
 359 };
 360