hw/pl031.c

   1 /*
   2  * ARM AMBA PrimeCell PL031 RTC
   3  *
   4  * Copyright (c) 2007 CodeSourcery
   5  *
   6  * This file is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  */
  11
  12 #include"vl.h"
  13
  14 //#define DEBUG_PL031
  15
  16 #ifdef DEBUG_PL031
  17 #define DPRINTF(fmt, args...) \
  18 do { printf("pl031: " fmt , ##args); } while (0)
  19 #else
  20 #define DPRINTF(fmt, args...) do {} while(0)
  21 #endif
  22
  23 #define RTC_DR      0x00    /* Data read register */
  24 #define RTC_MR      0x04    /* Match register */
  25 #define RTC_LR      0x08    /* Data load register */
  26 #define RTC_CR      0x0c    /* Control register */
  27 #define RTC_IMSC    0x10    /* Interrupt mask and set register */
  28 #define RTC_RIS     0x14    /* Raw interrupt status register */
  29 #define RTC_MIS     0x18    /* Masked interrupt status register */
  30 #define RTC_ICR     0x1c    /* Interrupt clear register */
  31
  32 typedef struct {
  33     QEMUTimer *timer;
  34     qemu_irq irq;
  35     uint32_t base;
  36
  37     uint64_t start_time;
  38     uint32_t tick_offset;
  39
  40     uint32_t mr;
  41     uint32_t lr;
  42     uint32_t cr;
  43     uint32_t im;
  44     uint32_t is;
  45 } pl031_state;
  46
  47 static const unsigned char pl031_id[] = {
  48     0x31, 0x10, 0x14, 0x00,         /* Device ID        */
  49     0x0d, 0xf0, 0x05, 0xb1          /* Cell ID      */
  50 };
  51
  52 static void pl031_update(pl031_state *s)
  53 {
  54     qemu_set_irq(s->irq, s->is & s->im);
  55 }
  56
  57 static void pl031_interrupt(void * opaque)
  58 {
  59     pl031_state *s = (pl031_state *)opaque;
  60
  61     s->im = 1;
  62     DPRINTF("Alarm raised\n");
  63     pl031_update(s);
  64 }
  65
  66 static uint32_t pl031_get_count(pl031_state *s)
  67 {
  68     /* This assumes qemu_get_clock returns the time since the machine was
  69        created.  */
  70     return s->tick_offset + qemu_get_clock(vm_clock) / ticks_per_sec;
  71 }
  72
  73 static void pl031_set_alarm(pl031_state *s)
  74 {
  75     int64_t now;
  76     uint32_t ticks;
  77
  78     now = qemu_get_clock(vm_clock);
  79     ticks = s->tick_offset + now / ticks_per_sec;
  80
  81     /* The timer wraps around.  This subtraction also wraps in the same way,
  82        and gives correct results when alarm < now_ticks.  */
  83     ticks = s->mr - ticks;
  84     DPRINTF("Alarm set in %ud ticks\n", ticks);
  85     if (ticks == 0) {
  86         qemu_del_timer(s->timer);
  87         pl031_interrupt(s);
  88     } else {
  89         qemu_mod_timer(s->timer, now + (int64_t)ticks * ticks_per_sec);
  90     }
  91 }
  92
  93 static uint32_t pl031_read(void *opaque, target_phys_addr_t offset)
  94 {
  95     pl031_state *s = (pl031_state *)opaque;
  96
  97     offset -= s->base;
  98
  99     if (offset >= 0xfe0  &&  offset < 0x1000)
 100         return pl031_id[(offset - 0xfe0) >> 2];
 101
 102     switch (offset) {
 103     case RTC_DR:
 104         return pl031_get_count(s);
 105     case RTC_MR:
 106         return s->mr;
 107     case RTC_IMSC:
 108         return s->im;
 109     case RTC_RIS:
 110         return s->is;
 111     case RTC_LR:
 112         return s->lr;
 113     case RTC_CR:
 114         /* RTC is permanently enabled.  */
 115         return 1;
 116     case RTC_MIS:
 117         return s->is & s->im;
 118     case RTC_ICR:
 119         fprintf(stderr, "qemu: pl031_read: Unexpected offset 0x%x\n",
 120                 (int)offset);
 121         break;
 122     default:
 123         cpu_abort(cpu_single_env, "pl031_read: Bad offset 0x%x\n",
 124                   (int)offset);
 125         break;
 126     }
 127
 128     return 0;
 129 }
 130
 131 static void pl031_write(void * opaque, target_phys_addr_t offset,
 132                         uint32_t value)
 133 {
 134     pl031_state *s = (pl031_state *)opaque;
 135
 136     offset -= s->base;
 137
 138     switch (offset) {
 139     case RTC_LR:
 140         s->tick_offset += value - pl031_get_count(s);
 141         pl031_set_alarm(s);
 142         break;
 143     case RTC_MR:
 144         s->mr = value;
 145         pl031_set_alarm(s);
 146         break;
 147     case RTC_IMSC:
 148         s->im = value & 1;
 149         DPRINTF("Interrupt mask %d\n", s->im);
 150         pl031_update(s);
 151         break;
 152     case RTC_ICR:
 153         /* The PL031 documentation (DDI0224B) states that the interupt is
 154            cleared when bit 0 of the written value is set.  However the
 155            arm926e documentation (DDI0287B) states that the interrupt is
 156            cleared when any value is written.  */
 157         DPRINTF("Interrupt cleared");
 158         s->is = 0;
 159         pl031_update(s);
 160         break;
 161     case RTC_CR:
 162         /* Written value is ignored.  */
 163         break;
 164
 165     case RTC_DR:
 166     case RTC_MIS:
 167     case RTC_RIS:
 168         fprintf(stderr, "qemu: pl031_write: Unexpected offset 0x%x\n",
 169                 (int)offset);
 170         break;
 171
 172     default:
 173         cpu_abort(cpu_single_env, "pl031_write: Bad offset 0x%x\n",
 174                   (int)offset);
 175         break;
 176     }
 177 }
 178
 179 static CPUWriteMemoryFunc * pl031_writefn[] = {
 180     pl031_write,
 181     pl031_write,
 182     pl031_write
 183 };
 184
 185 static CPUReadMemoryFunc * pl031_readfn[] = {
 186     pl031_read,
 187     pl031_read,
 188     pl031_read
 189 };
 190
 191 void pl031_init(uint32_t base, qemu_irq irq)
 192 {
 193     int iomemtype;
 194     pl031_state *s;
 195     time_t ti;
 196     struct tm *tm;
 197
 198     s = qemu_mallocz(sizeof(pl031_state));
 199     if (!s)
 200         cpu_abort(cpu_single_env, "pl031_init: Out of memory\n");
 201
 202     iomemtype = cpu_register_io_memory(0, pl031_readfn, pl031_writefn, s);
 203     if (iomemtype == -1)
 204         cpu_abort(cpu_single_env, "pl031_init: Can't register I/O memory\n");
 205
 206     cpu_register_physical_memory(base, 0x00001000, iomemtype);
 207
 208     s->base = base;
 209     s->irq  = irq;
 210     /* ??? We assume vm_clock is zero at this point.  */
 211     time(&ti);
 212     if (rtc_utc)
 213         tm = gmtime(&ti);
 214     else
 215         tm = localtime(&ti);
 216     s->tick_offset = mktime(tm);
 217
 218     s->timer = qemu_new_timer(vm_clock, pl031_interrupt, s);
 219 }