igd-passthrough: fix use of host_pci_config_read
[qemu/cris-port.git] / migration / ram.c
blob0490f005dd10c8125bc8f995f5b78043e9b7306c
1 /*
2 * QEMU System Emulator
4 * Copyright (c) 2003-2008 Fabrice Bellard
5 * Copyright (c) 2011-2015 Red Hat Inc
7 * Authors:
8 * Juan Quintela <quintela@redhat.com>
10 * Permission is hereby granted, free of charge, to any person obtaining a copy
11 * of this software and associated documentation files (the "Software"), to deal
12 * in the Software without restriction, including without limitation the rights
13 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
14 * copies of the Software, and to permit persons to whom the Software is
15 * furnished to do so, subject to the following conditions:
17 * The above copyright notice and this permission notice shall be included in
18 * all copies or substantial portions of the Software.
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
21 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
23 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
24 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
25 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
26 * THE SOFTWARE.
28 #include <stdint.h>
29 #include <zlib.h>
30 #include "qemu/bitops.h"
31 #include "qemu/bitmap.h"
32 #include "qemu/timer.h"
33 #include "qemu/main-loop.h"
34 #include "migration/migration.h"
35 #include "migration/postcopy-ram.h"
36 #include "exec/address-spaces.h"
37 #include "migration/page_cache.h"
38 #include "qemu/error-report.h"
39 #include "trace.h"
40 #include "exec/ram_addr.h"
41 #include "qemu/rcu_queue.h"
43 #ifdef DEBUG_MIGRATION_RAM
44 #define DPRINTF(fmt, ...) \
45 do { fprintf(stdout, "migration_ram: " fmt, ## __VA_ARGS__); } while (0)
46 #else
47 #define DPRINTF(fmt, ...) \
48 do { } while (0)
49 #endif
51 static int dirty_rate_high_cnt;
53 static uint64_t bitmap_sync_count;
55 /***********************************************************/
56 /* ram save/restore */
58 #define RAM_SAVE_FLAG_FULL 0x01 /* Obsolete, not used anymore */
59 #define RAM_SAVE_FLAG_COMPRESS 0x02
60 #define RAM_SAVE_FLAG_MEM_SIZE 0x04
61 #define RAM_SAVE_FLAG_PAGE 0x08
62 #define RAM_SAVE_FLAG_EOS 0x10
63 #define RAM_SAVE_FLAG_CONTINUE 0x20
64 #define RAM_SAVE_FLAG_XBZRLE 0x40
65 /* 0x80 is reserved in migration.h start with 0x100 next */
66 #define RAM_SAVE_FLAG_COMPRESS_PAGE 0x100
68 static const uint8_t ZERO_TARGET_PAGE[TARGET_PAGE_SIZE];
70 static inline bool is_zero_range(uint8_t *p, uint64_t size)
72 return buffer_find_nonzero_offset(p, size) == size;
75 /* struct contains XBZRLE cache and a static page
76 used by the compression */
77 static struct {
78 /* buffer used for XBZRLE encoding */
79 uint8_t *encoded_buf;
80 /* buffer for storing page content */
81 uint8_t *current_buf;
82 /* Cache for XBZRLE, Protected by lock. */
83 PageCache *cache;
84 QemuMutex lock;
85 } XBZRLE;
87 /* buffer used for XBZRLE decoding */
88 static uint8_t *xbzrle_decoded_buf;
90 static void XBZRLE_cache_lock(void)
92 if (migrate_use_xbzrle())
93 qemu_mutex_lock(&XBZRLE.lock);
96 static void XBZRLE_cache_unlock(void)
98 if (migrate_use_xbzrle())
99 qemu_mutex_unlock(&XBZRLE.lock);
103 * called from qmp_migrate_set_cache_size in main thread, possibly while
104 * a migration is in progress.
105 * A running migration maybe using the cache and might finish during this
106 * call, hence changes to the cache are protected by XBZRLE.lock().
108 int64_t xbzrle_cache_resize(int64_t new_size)
110 PageCache *new_cache;
111 int64_t ret;
113 if (new_size < TARGET_PAGE_SIZE) {
114 return -1;
117 XBZRLE_cache_lock();
119 if (XBZRLE.cache != NULL) {
120 if (pow2floor(new_size) == migrate_xbzrle_cache_size()) {
121 goto out_new_size;
123 new_cache = cache_init(new_size / TARGET_PAGE_SIZE,
124 TARGET_PAGE_SIZE);
125 if (!new_cache) {
126 error_report("Error creating cache");
127 ret = -1;
128 goto out;
131 cache_fini(XBZRLE.cache);
132 XBZRLE.cache = new_cache;
135 out_new_size:
136 ret = pow2floor(new_size);
137 out:
138 XBZRLE_cache_unlock();
139 return ret;
142 /* accounting for migration statistics */
143 typedef struct AccountingInfo {
144 uint64_t dup_pages;
145 uint64_t skipped_pages;
146 uint64_t norm_pages;
147 uint64_t iterations;
148 uint64_t xbzrle_bytes;
149 uint64_t xbzrle_pages;
150 uint64_t xbzrle_cache_miss;
151 double xbzrle_cache_miss_rate;
152 uint64_t xbzrle_overflows;
153 } AccountingInfo;
155 static AccountingInfo acct_info;
157 static void acct_clear(void)
159 memset(&acct_info, 0, sizeof(acct_info));
162 uint64_t dup_mig_bytes_transferred(void)
164 return acct_info.dup_pages * TARGET_PAGE_SIZE;
167 uint64_t dup_mig_pages_transferred(void)
169 return acct_info.dup_pages;
172 uint64_t skipped_mig_bytes_transferred(void)
174 return acct_info.skipped_pages * TARGET_PAGE_SIZE;
177 uint64_t skipped_mig_pages_transferred(void)
179 return acct_info.skipped_pages;
182 uint64_t norm_mig_bytes_transferred(void)
184 return acct_info.norm_pages * TARGET_PAGE_SIZE;
187 uint64_t norm_mig_pages_transferred(void)
189 return acct_info.norm_pages;
192 uint64_t xbzrle_mig_bytes_transferred(void)
194 return acct_info.xbzrle_bytes;
197 uint64_t xbzrle_mig_pages_transferred(void)
199 return acct_info.xbzrle_pages;
202 uint64_t xbzrle_mig_pages_cache_miss(void)
204 return acct_info.xbzrle_cache_miss;
207 double xbzrle_mig_cache_miss_rate(void)
209 return acct_info.xbzrle_cache_miss_rate;
212 uint64_t xbzrle_mig_pages_overflow(void)
214 return acct_info.xbzrle_overflows;
217 /* This is the last block that we have visited serching for dirty pages
219 static RAMBlock *last_seen_block;
220 /* This is the last block from where we have sent data */
221 static RAMBlock *last_sent_block;
222 static ram_addr_t last_offset;
223 static QemuMutex migration_bitmap_mutex;
224 static uint64_t migration_dirty_pages;
225 static uint32_t last_version;
226 static bool ram_bulk_stage;
228 /* used by the search for pages to send */
229 struct PageSearchStatus {
230 /* Current block being searched */
231 RAMBlock *block;
232 /* Current offset to search from */
233 ram_addr_t offset;
234 /* Set once we wrap around */
235 bool complete_round;
237 typedef struct PageSearchStatus PageSearchStatus;
239 static struct BitmapRcu {
240 struct rcu_head rcu;
241 /* Main migration bitmap */
242 unsigned long *bmap;
243 /* bitmap of pages that haven't been sent even once
244 * only maintained and used in postcopy at the moment
245 * where it's used to send the dirtymap at the start
246 * of the postcopy phase
248 unsigned long *unsentmap;
249 } *migration_bitmap_rcu;
251 struct CompressParam {
252 bool start;
253 bool done;
254 QEMUFile *file;
255 QemuMutex mutex;
256 QemuCond cond;
257 RAMBlock *block;
258 ram_addr_t offset;
260 typedef struct CompressParam CompressParam;
262 struct DecompressParam {
263 bool start;
264 QemuMutex mutex;
265 QemuCond cond;
266 void *des;
267 uint8 *compbuf;
268 int len;
270 typedef struct DecompressParam DecompressParam;
272 static CompressParam *comp_param;
273 static QemuThread *compress_threads;
274 /* comp_done_cond is used to wake up the migration thread when
275 * one of the compression threads has finished the compression.
276 * comp_done_lock is used to co-work with comp_done_cond.
278 static QemuMutex *comp_done_lock;
279 static QemuCond *comp_done_cond;
280 /* The empty QEMUFileOps will be used by file in CompressParam */
281 static const QEMUFileOps empty_ops = { };
283 static bool compression_switch;
284 static bool quit_comp_thread;
285 static bool quit_decomp_thread;
286 static DecompressParam *decomp_param;
287 static QemuThread *decompress_threads;
288 static uint8_t *compressed_data_buf;
290 static int do_compress_ram_page(CompressParam *param);
292 static void *do_data_compress(void *opaque)
294 CompressParam *param = opaque;
296 while (!quit_comp_thread) {
297 qemu_mutex_lock(&param->mutex);
298 /* Re-check the quit_comp_thread in case of
299 * terminate_compression_threads is called just before
300 * qemu_mutex_lock(&param->mutex) and after
301 * while(!quit_comp_thread), re-check it here can make
302 * sure the compression thread terminate as expected.
304 while (!param->start && !quit_comp_thread) {
305 qemu_cond_wait(&param->cond, &param->mutex);
307 if (!quit_comp_thread) {
308 do_compress_ram_page(param);
310 param->start = false;
311 qemu_mutex_unlock(&param->mutex);
313 qemu_mutex_lock(comp_done_lock);
314 param->done = true;
315 qemu_cond_signal(comp_done_cond);
316 qemu_mutex_unlock(comp_done_lock);
319 return NULL;
322 static inline void terminate_compression_threads(void)
324 int idx, thread_count;
326 thread_count = migrate_compress_threads();
327 quit_comp_thread = true;
328 for (idx = 0; idx < thread_count; idx++) {
329 qemu_mutex_lock(&comp_param[idx].mutex);
330 qemu_cond_signal(&comp_param[idx].cond);
331 qemu_mutex_unlock(&comp_param[idx].mutex);
335 void migrate_compress_threads_join(void)
337 int i, thread_count;
339 if (!migrate_use_compression()) {
340 return;
342 terminate_compression_threads();
343 thread_count = migrate_compress_threads();
344 for (i = 0; i < thread_count; i++) {
345 qemu_thread_join(compress_threads + i);
346 qemu_fclose(comp_param[i].file);
347 qemu_mutex_destroy(&comp_param[i].mutex);
348 qemu_cond_destroy(&comp_param[i].cond);
350 qemu_mutex_destroy(comp_done_lock);
351 qemu_cond_destroy(comp_done_cond);
352 g_free(compress_threads);
353 g_free(comp_param);
354 g_free(comp_done_cond);
355 g_free(comp_done_lock);
356 compress_threads = NULL;
357 comp_param = NULL;
358 comp_done_cond = NULL;
359 comp_done_lock = NULL;
362 void migrate_compress_threads_create(void)
364 int i, thread_count;
366 if (!migrate_use_compression()) {
367 return;
369 quit_comp_thread = false;
370 compression_switch = true;
371 thread_count = migrate_compress_threads();
372 compress_threads = g_new0(QemuThread, thread_count);
373 comp_param = g_new0(CompressParam, thread_count);
374 comp_done_cond = g_new0(QemuCond, 1);
375 comp_done_lock = g_new0(QemuMutex, 1);
376 qemu_cond_init(comp_done_cond);
377 qemu_mutex_init(comp_done_lock);
378 for (i = 0; i < thread_count; i++) {
379 /* com_param[i].file is just used as a dummy buffer to save data, set
380 * it's ops to empty.
382 comp_param[i].file = qemu_fopen_ops(NULL, &empty_ops);
383 comp_param[i].done = true;
384 qemu_mutex_init(&comp_param[i].mutex);
385 qemu_cond_init(&comp_param[i].cond);
386 qemu_thread_create(compress_threads + i, "compress",
387 do_data_compress, comp_param + i,
388 QEMU_THREAD_JOINABLE);
393 * save_page_header: Write page header to wire
395 * If this is the 1st block, it also writes the block identification
397 * Returns: Number of bytes written
399 * @f: QEMUFile where to send the data
400 * @block: block that contains the page we want to send
401 * @offset: offset inside the block for the page
402 * in the lower bits, it contains flags
404 static size_t save_page_header(QEMUFile *f, RAMBlock *block, ram_addr_t offset)
406 size_t size, len;
408 qemu_put_be64(f, offset);
409 size = 8;
411 if (!(offset & RAM_SAVE_FLAG_CONTINUE)) {
412 len = strlen(block->idstr);
413 qemu_put_byte(f, len);
414 qemu_put_buffer(f, (uint8_t *)block->idstr, len);
415 size += 1 + len;
417 return size;
420 /* Reduce amount of guest cpu execution to hopefully slow down memory writes.
421 * If guest dirty memory rate is reduced below the rate at which we can
422 * transfer pages to the destination then we should be able to complete
423 * migration. Some workloads dirty memory way too fast and will not effectively
424 * converge, even with auto-converge.
426 static void mig_throttle_guest_down(void)
428 MigrationState *s = migrate_get_current();
429 uint64_t pct_initial =
430 s->parameters[MIGRATION_PARAMETER_X_CPU_THROTTLE_INITIAL];
431 uint64_t pct_icrement =
432 s->parameters[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT];
434 /* We have not started throttling yet. Let's start it. */
435 if (!cpu_throttle_active()) {
436 cpu_throttle_set(pct_initial);
437 } else {
438 /* Throttling already on, just increase the rate */
439 cpu_throttle_set(cpu_throttle_get_percentage() + pct_icrement);
443 /* Update the xbzrle cache to reflect a page that's been sent as all 0.
444 * The important thing is that a stale (not-yet-0'd) page be replaced
445 * by the new data.
446 * As a bonus, if the page wasn't in the cache it gets added so that
447 * when a small write is made into the 0'd page it gets XBZRLE sent
449 static void xbzrle_cache_zero_page(ram_addr_t current_addr)
451 if (ram_bulk_stage || !migrate_use_xbzrle()) {
452 return;
455 /* We don't care if this fails to allocate a new cache page
456 * as long as it updated an old one */
457 cache_insert(XBZRLE.cache, current_addr, ZERO_TARGET_PAGE,
458 bitmap_sync_count);
461 #define ENCODING_FLAG_XBZRLE 0x1
464 * save_xbzrle_page: compress and send current page
466 * Returns: 1 means that we wrote the page
467 * 0 means that page is identical to the one already sent
468 * -1 means that xbzrle would be longer than normal
470 * @f: QEMUFile where to send the data
471 * @current_data:
472 * @current_addr:
473 * @block: block that contains the page we want to send
474 * @offset: offset inside the block for the page
475 * @last_stage: if we are at the completion stage
476 * @bytes_transferred: increase it with the number of transferred bytes
478 static int save_xbzrle_page(QEMUFile *f, uint8_t **current_data,
479 ram_addr_t current_addr, RAMBlock *block,
480 ram_addr_t offset, bool last_stage,
481 uint64_t *bytes_transferred)
483 int encoded_len = 0, bytes_xbzrle;
484 uint8_t *prev_cached_page;
486 if (!cache_is_cached(XBZRLE.cache, current_addr, bitmap_sync_count)) {
487 acct_info.xbzrle_cache_miss++;
488 if (!last_stage) {
489 if (cache_insert(XBZRLE.cache, current_addr, *current_data,
490 bitmap_sync_count) == -1) {
491 return -1;
492 } else {
493 /* update *current_data when the page has been
494 inserted into cache */
495 *current_data = get_cached_data(XBZRLE.cache, current_addr);
498 return -1;
501 prev_cached_page = get_cached_data(XBZRLE.cache, current_addr);
503 /* save current buffer into memory */
504 memcpy(XBZRLE.current_buf, *current_data, TARGET_PAGE_SIZE);
506 /* XBZRLE encoding (if there is no overflow) */
507 encoded_len = xbzrle_encode_buffer(prev_cached_page, XBZRLE.current_buf,
508 TARGET_PAGE_SIZE, XBZRLE.encoded_buf,
509 TARGET_PAGE_SIZE);
510 if (encoded_len == 0) {
511 DPRINTF("Skipping unmodified page\n");
512 return 0;
513 } else if (encoded_len == -1) {
514 DPRINTF("Overflow\n");
515 acct_info.xbzrle_overflows++;
516 /* update data in the cache */
517 if (!last_stage) {
518 memcpy(prev_cached_page, *current_data, TARGET_PAGE_SIZE);
519 *current_data = prev_cached_page;
521 return -1;
524 /* we need to update the data in the cache, in order to get the same data */
525 if (!last_stage) {
526 memcpy(prev_cached_page, XBZRLE.current_buf, TARGET_PAGE_SIZE);
529 /* Send XBZRLE based compressed page */
530 bytes_xbzrle = save_page_header(f, block, offset | RAM_SAVE_FLAG_XBZRLE);
531 qemu_put_byte(f, ENCODING_FLAG_XBZRLE);
532 qemu_put_be16(f, encoded_len);
533 qemu_put_buffer(f, XBZRLE.encoded_buf, encoded_len);
534 bytes_xbzrle += encoded_len + 1 + 2;
535 acct_info.xbzrle_pages++;
536 acct_info.xbzrle_bytes += bytes_xbzrle;
537 *bytes_transferred += bytes_xbzrle;
539 return 1;
542 /* Called with rcu_read_lock() to protect migration_bitmap
543 * rb: The RAMBlock to search for dirty pages in
544 * start: Start address (typically so we can continue from previous page)
545 * ram_addr_abs: Pointer into which to store the address of the dirty page
546 * within the global ram_addr space
548 * Returns: byte offset within memory region of the start of a dirty page
550 static inline
551 ram_addr_t migration_bitmap_find_dirty(RAMBlock *rb,
552 ram_addr_t start,
553 ram_addr_t *ram_addr_abs)
555 unsigned long base = rb->offset >> TARGET_PAGE_BITS;
556 unsigned long nr = base + (start >> TARGET_PAGE_BITS);
557 uint64_t rb_size = rb->used_length;
558 unsigned long size = base + (rb_size >> TARGET_PAGE_BITS);
559 unsigned long *bitmap;
561 unsigned long next;
563 bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
564 if (ram_bulk_stage && nr > base) {
565 next = nr + 1;
566 } else {
567 next = find_next_bit(bitmap, size, nr);
570 *ram_addr_abs = next << TARGET_PAGE_BITS;
571 return (next - base) << TARGET_PAGE_BITS;
574 static inline bool migration_bitmap_clear_dirty(ram_addr_t addr)
576 bool ret;
577 int nr = addr >> TARGET_PAGE_BITS;
578 unsigned long *bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
580 ret = test_and_clear_bit(nr, bitmap);
582 if (ret) {
583 migration_dirty_pages--;
585 return ret;
588 static void migration_bitmap_sync_range(ram_addr_t start, ram_addr_t length)
590 unsigned long *bitmap;
591 bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
592 migration_dirty_pages +=
593 cpu_physical_memory_sync_dirty_bitmap(bitmap, start, length);
596 /* Fix me: there are too many global variables used in migration process. */
597 static int64_t start_time;
598 static int64_t bytes_xfer_prev;
599 static int64_t num_dirty_pages_period;
600 static uint64_t xbzrle_cache_miss_prev;
601 static uint64_t iterations_prev;
603 static void migration_bitmap_sync_init(void)
605 start_time = 0;
606 bytes_xfer_prev = 0;
607 num_dirty_pages_period = 0;
608 xbzrle_cache_miss_prev = 0;
609 iterations_prev = 0;
612 /* Called with iothread lock held, to protect ram_list.dirty_memory[] */
613 static void migration_bitmap_sync(void)
615 RAMBlock *block;
616 uint64_t num_dirty_pages_init = migration_dirty_pages;
617 MigrationState *s = migrate_get_current();
618 int64_t end_time;
619 int64_t bytes_xfer_now;
621 bitmap_sync_count++;
623 if (!bytes_xfer_prev) {
624 bytes_xfer_prev = ram_bytes_transferred();
627 if (!start_time) {
628 start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
631 trace_migration_bitmap_sync_start();
632 address_space_sync_dirty_bitmap(&address_space_memory);
634 qemu_mutex_lock(&migration_bitmap_mutex);
635 rcu_read_lock();
636 QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
637 migration_bitmap_sync_range(block->offset, block->used_length);
639 rcu_read_unlock();
640 qemu_mutex_unlock(&migration_bitmap_mutex);
642 trace_migration_bitmap_sync_end(migration_dirty_pages
643 - num_dirty_pages_init);
644 num_dirty_pages_period += migration_dirty_pages - num_dirty_pages_init;
645 end_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
647 /* more than 1 second = 1000 millisecons */
648 if (end_time > start_time + 1000) {
649 if (migrate_auto_converge()) {
650 /* The following detection logic can be refined later. For now:
651 Check to see if the dirtied bytes is 50% more than the approx.
652 amount of bytes that just got transferred since the last time we
653 were in this routine. If that happens twice, start or increase
654 throttling */
655 bytes_xfer_now = ram_bytes_transferred();
657 if (s->dirty_pages_rate &&
658 (num_dirty_pages_period * TARGET_PAGE_SIZE >
659 (bytes_xfer_now - bytes_xfer_prev)/2) &&
660 (dirty_rate_high_cnt++ >= 2)) {
661 trace_migration_throttle();
662 dirty_rate_high_cnt = 0;
663 mig_throttle_guest_down();
665 bytes_xfer_prev = bytes_xfer_now;
668 if (migrate_use_xbzrle()) {
669 if (iterations_prev != acct_info.iterations) {
670 acct_info.xbzrle_cache_miss_rate =
671 (double)(acct_info.xbzrle_cache_miss -
672 xbzrle_cache_miss_prev) /
673 (acct_info.iterations - iterations_prev);
675 iterations_prev = acct_info.iterations;
676 xbzrle_cache_miss_prev = acct_info.xbzrle_cache_miss;
678 s->dirty_pages_rate = num_dirty_pages_period * 1000
679 / (end_time - start_time);
680 s->dirty_bytes_rate = s->dirty_pages_rate * TARGET_PAGE_SIZE;
681 start_time = end_time;
682 num_dirty_pages_period = 0;
684 s->dirty_sync_count = bitmap_sync_count;
688 * save_zero_page: Send the zero page to the stream
690 * Returns: Number of pages written.
692 * @f: QEMUFile where to send the data
693 * @block: block that contains the page we want to send
694 * @offset: offset inside the block for the page
695 * @p: pointer to the page
696 * @bytes_transferred: increase it with the number of transferred bytes
698 static int save_zero_page(QEMUFile *f, RAMBlock *block, ram_addr_t offset,
699 uint8_t *p, uint64_t *bytes_transferred)
701 int pages = -1;
703 if (is_zero_range(p, TARGET_PAGE_SIZE)) {
704 acct_info.dup_pages++;
705 *bytes_transferred += save_page_header(f, block,
706 offset | RAM_SAVE_FLAG_COMPRESS);
707 qemu_put_byte(f, 0);
708 *bytes_transferred += 1;
709 pages = 1;
712 return pages;
716 * ram_save_page: Send the given page to the stream
718 * Returns: Number of pages written.
719 * < 0 - error
720 * >=0 - Number of pages written - this might legally be 0
721 * if xbzrle noticed the page was the same.
723 * @f: QEMUFile where to send the data
724 * @block: block that contains the page we want to send
725 * @offset: offset inside the block for the page
726 * @last_stage: if we are at the completion stage
727 * @bytes_transferred: increase it with the number of transferred bytes
729 static int ram_save_page(QEMUFile *f, RAMBlock* block, ram_addr_t offset,
730 bool last_stage, uint64_t *bytes_transferred)
732 int pages = -1;
733 uint64_t bytes_xmit;
734 ram_addr_t current_addr;
735 uint8_t *p;
736 int ret;
737 bool send_async = true;
739 p = block->host + offset;
741 /* In doubt sent page as normal */
742 bytes_xmit = 0;
743 ret = ram_control_save_page(f, block->offset,
744 offset, TARGET_PAGE_SIZE, &bytes_xmit);
745 if (bytes_xmit) {
746 *bytes_transferred += bytes_xmit;
747 pages = 1;
750 XBZRLE_cache_lock();
752 current_addr = block->offset + offset;
754 if (block == last_sent_block) {
755 offset |= RAM_SAVE_FLAG_CONTINUE;
757 if (ret != RAM_SAVE_CONTROL_NOT_SUPP) {
758 if (ret != RAM_SAVE_CONTROL_DELAYED) {
759 if (bytes_xmit > 0) {
760 acct_info.norm_pages++;
761 } else if (bytes_xmit == 0) {
762 acct_info.dup_pages++;
765 } else {
766 pages = save_zero_page(f, block, offset, p, bytes_transferred);
767 if (pages > 0) {
768 /* Must let xbzrle know, otherwise a previous (now 0'd) cached
769 * page would be stale
771 xbzrle_cache_zero_page(current_addr);
772 } else if (!ram_bulk_stage && migrate_use_xbzrle()) {
773 pages = save_xbzrle_page(f, &p, current_addr, block,
774 offset, last_stage, bytes_transferred);
775 if (!last_stage) {
776 /* Can't send this cached data async, since the cache page
777 * might get updated before it gets to the wire
779 send_async = false;
784 /* XBZRLE overflow or normal page */
785 if (pages == -1) {
786 *bytes_transferred += save_page_header(f, block,
787 offset | RAM_SAVE_FLAG_PAGE);
788 if (send_async) {
789 qemu_put_buffer_async(f, p, TARGET_PAGE_SIZE);
790 } else {
791 qemu_put_buffer(f, p, TARGET_PAGE_SIZE);
793 *bytes_transferred += TARGET_PAGE_SIZE;
794 pages = 1;
795 acct_info.norm_pages++;
798 XBZRLE_cache_unlock();
800 return pages;
803 static int do_compress_ram_page(CompressParam *param)
805 int bytes_sent, blen;
806 uint8_t *p;
807 RAMBlock *block = param->block;
808 ram_addr_t offset = param->offset;
810 p = block->host + (offset & TARGET_PAGE_MASK);
812 bytes_sent = save_page_header(param->file, block, offset |
813 RAM_SAVE_FLAG_COMPRESS_PAGE);
814 blen = qemu_put_compression_data(param->file, p, TARGET_PAGE_SIZE,
815 migrate_compress_level());
816 bytes_sent += blen;
818 return bytes_sent;
821 static inline void start_compression(CompressParam *param)
823 param->done = false;
824 qemu_mutex_lock(&param->mutex);
825 param->start = true;
826 qemu_cond_signal(&param->cond);
827 qemu_mutex_unlock(&param->mutex);
830 static inline void start_decompression(DecompressParam *param)
832 qemu_mutex_lock(&param->mutex);
833 param->start = true;
834 qemu_cond_signal(&param->cond);
835 qemu_mutex_unlock(&param->mutex);
838 static uint64_t bytes_transferred;
840 static void flush_compressed_data(QEMUFile *f)
842 int idx, len, thread_count;
844 if (!migrate_use_compression()) {
845 return;
847 thread_count = migrate_compress_threads();
848 for (idx = 0; idx < thread_count; idx++) {
849 if (!comp_param[idx].done) {
850 qemu_mutex_lock(comp_done_lock);
851 while (!comp_param[idx].done && !quit_comp_thread) {
852 qemu_cond_wait(comp_done_cond, comp_done_lock);
854 qemu_mutex_unlock(comp_done_lock);
856 if (!quit_comp_thread) {
857 len = qemu_put_qemu_file(f, comp_param[idx].file);
858 bytes_transferred += len;
863 static inline void set_compress_params(CompressParam *param, RAMBlock *block,
864 ram_addr_t offset)
866 param->block = block;
867 param->offset = offset;
870 static int compress_page_with_multi_thread(QEMUFile *f, RAMBlock *block,
871 ram_addr_t offset,
872 uint64_t *bytes_transferred)
874 int idx, thread_count, bytes_xmit = -1, pages = -1;
876 thread_count = migrate_compress_threads();
877 qemu_mutex_lock(comp_done_lock);
878 while (true) {
879 for (idx = 0; idx < thread_count; idx++) {
880 if (comp_param[idx].done) {
881 bytes_xmit = qemu_put_qemu_file(f, comp_param[idx].file);
882 set_compress_params(&comp_param[idx], block, offset);
883 start_compression(&comp_param[idx]);
884 pages = 1;
885 acct_info.norm_pages++;
886 *bytes_transferred += bytes_xmit;
887 break;
890 if (pages > 0) {
891 break;
892 } else {
893 qemu_cond_wait(comp_done_cond, comp_done_lock);
896 qemu_mutex_unlock(comp_done_lock);
898 return pages;
902 * ram_save_compressed_page: compress the given page and send it to the stream
904 * Returns: Number of pages written.
906 * @f: QEMUFile where to send the data
907 * @block: block that contains the page we want to send
908 * @offset: offset inside the block for the page
909 * @last_stage: if we are at the completion stage
910 * @bytes_transferred: increase it with the number of transferred bytes
912 static int ram_save_compressed_page(QEMUFile *f, RAMBlock *block,
913 ram_addr_t offset, bool last_stage,
914 uint64_t *bytes_transferred)
916 int pages = -1;
917 uint64_t bytes_xmit;
918 uint8_t *p;
919 int ret;
921 p = block->host + offset;
923 bytes_xmit = 0;
924 ret = ram_control_save_page(f, block->offset,
925 offset, TARGET_PAGE_SIZE, &bytes_xmit);
926 if (bytes_xmit) {
927 *bytes_transferred += bytes_xmit;
928 pages = 1;
930 if (block == last_sent_block) {
931 offset |= RAM_SAVE_FLAG_CONTINUE;
933 if (ret != RAM_SAVE_CONTROL_NOT_SUPP) {
934 if (ret != RAM_SAVE_CONTROL_DELAYED) {
935 if (bytes_xmit > 0) {
936 acct_info.norm_pages++;
937 } else if (bytes_xmit == 0) {
938 acct_info.dup_pages++;
941 } else {
942 /* When starting the process of a new block, the first page of
943 * the block should be sent out before other pages in the same
944 * block, and all the pages in last block should have been sent
945 * out, keeping this order is important, because the 'cont' flag
946 * is used to avoid resending the block name.
948 if (block != last_sent_block) {
949 flush_compressed_data(f);
950 pages = save_zero_page(f, block, offset, p, bytes_transferred);
951 if (pages == -1) {
952 set_compress_params(&comp_param[0], block, offset);
953 /* Use the qemu thread to compress the data to make sure the
954 * first page is sent out before other pages
956 bytes_xmit = do_compress_ram_page(&comp_param[0]);
957 acct_info.norm_pages++;
958 qemu_put_qemu_file(f, comp_param[0].file);
959 *bytes_transferred += bytes_xmit;
960 pages = 1;
962 } else {
963 pages = save_zero_page(f, block, offset, p, bytes_transferred);
964 if (pages == -1) {
965 pages = compress_page_with_multi_thread(f, block, offset,
966 bytes_transferred);
971 return pages;
975 * Find the next dirty page and update any state associated with
976 * the search process.
978 * Returns: True if a page is found
980 * @f: Current migration stream.
981 * @pss: Data about the state of the current dirty page scan.
982 * @*again: Set to false if the search has scanned the whole of RAM
983 * *ram_addr_abs: Pointer into which to store the address of the dirty page
984 * within the global ram_addr space
986 static bool find_dirty_block(QEMUFile *f, PageSearchStatus *pss,
987 bool *again, ram_addr_t *ram_addr_abs)
989 pss->offset = migration_bitmap_find_dirty(pss->block, pss->offset,
990 ram_addr_abs);
991 if (pss->complete_round && pss->block == last_seen_block &&
992 pss->offset >= last_offset) {
994 * We've been once around the RAM and haven't found anything.
995 * Give up.
997 *again = false;
998 return false;
1000 if (pss->offset >= pss->block->used_length) {
1001 /* Didn't find anything in this RAM Block */
1002 pss->offset = 0;
1003 pss->block = QLIST_NEXT_RCU(pss->block, next);
1004 if (!pss->block) {
1005 /* Hit the end of the list */
1006 pss->block = QLIST_FIRST_RCU(&ram_list.blocks);
1007 /* Flag that we've looped */
1008 pss->complete_round = true;
1009 ram_bulk_stage = false;
1010 if (migrate_use_xbzrle()) {
1011 /* If xbzrle is on, stop using the data compression at this
1012 * point. In theory, xbzrle can do better than compression.
1014 flush_compressed_data(f);
1015 compression_switch = false;
1018 /* Didn't find anything this time, but try again on the new block */
1019 *again = true;
1020 return false;
1021 } else {
1022 /* Can go around again, but... */
1023 *again = true;
1024 /* We've found something so probably don't need to */
1025 return true;
1030 * Helper for 'get_queued_page' - gets a page off the queue
1031 * ms: MigrationState in
1032 * *offset: Used to return the offset within the RAMBlock
1033 * ram_addr_abs: global offset in the dirty/sent bitmaps
1035 * Returns: block (or NULL if none available)
1037 static RAMBlock *unqueue_page(MigrationState *ms, ram_addr_t *offset,
1038 ram_addr_t *ram_addr_abs)
1040 RAMBlock *block = NULL;
1042 qemu_mutex_lock(&ms->src_page_req_mutex);
1043 if (!QSIMPLEQ_EMPTY(&ms->src_page_requests)) {
1044 struct MigrationSrcPageRequest *entry =
1045 QSIMPLEQ_FIRST(&ms->src_page_requests);
1046 block = entry->rb;
1047 *offset = entry->offset;
1048 *ram_addr_abs = (entry->offset + entry->rb->offset) &
1049 TARGET_PAGE_MASK;
1051 if (entry->len > TARGET_PAGE_SIZE) {
1052 entry->len -= TARGET_PAGE_SIZE;
1053 entry->offset += TARGET_PAGE_SIZE;
1054 } else {
1055 memory_region_unref(block->mr);
1056 QSIMPLEQ_REMOVE_HEAD(&ms->src_page_requests, next_req);
1057 g_free(entry);
1060 qemu_mutex_unlock(&ms->src_page_req_mutex);
1062 return block;
1066 * Unqueue a page from the queue fed by postcopy page requests; skips pages
1067 * that are already sent (!dirty)
1069 * ms: MigrationState in
1070 * pss: PageSearchStatus structure updated with found block/offset
1071 * ram_addr_abs: global offset in the dirty/sent bitmaps
1073 * Returns: true if a queued page is found
1075 static bool get_queued_page(MigrationState *ms, PageSearchStatus *pss,
1076 ram_addr_t *ram_addr_abs)
1078 RAMBlock *block;
1079 ram_addr_t offset;
1080 bool dirty;
1082 do {
1083 block = unqueue_page(ms, &offset, ram_addr_abs);
1085 * We're sending this page, and since it's postcopy nothing else
1086 * will dirty it, and we must make sure it doesn't get sent again
1087 * even if this queue request was received after the background
1088 * search already sent it.
1090 if (block) {
1091 unsigned long *bitmap;
1092 bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
1093 dirty = test_bit(*ram_addr_abs >> TARGET_PAGE_BITS, bitmap);
1094 if (!dirty) {
1095 trace_get_queued_page_not_dirty(
1096 block->idstr, (uint64_t)offset,
1097 (uint64_t)*ram_addr_abs,
1098 test_bit(*ram_addr_abs >> TARGET_PAGE_BITS,
1099 atomic_rcu_read(&migration_bitmap_rcu)->unsentmap));
1100 } else {
1101 trace_get_queued_page(block->idstr,
1102 (uint64_t)offset,
1103 (uint64_t)*ram_addr_abs);
1107 } while (block && !dirty);
1109 if (block) {
1111 * As soon as we start servicing pages out of order, then we have
1112 * to kill the bulk stage, since the bulk stage assumes
1113 * in (migration_bitmap_find_and_reset_dirty) that every page is
1114 * dirty, that's no longer true.
1116 ram_bulk_stage = false;
1119 * We want the background search to continue from the queued page
1120 * since the guest is likely to want other pages near to the page
1121 * it just requested.
1123 pss->block = block;
1124 pss->offset = offset;
1127 return !!block;
1131 * flush_page_queue: Flush any remaining pages in the ram request queue
1132 * it should be empty at the end anyway, but in error cases there may be
1133 * some left.
1135 * ms: MigrationState
1137 void flush_page_queue(MigrationState *ms)
1139 struct MigrationSrcPageRequest *mspr, *next_mspr;
1140 /* This queue generally should be empty - but in the case of a failed
1141 * migration might have some droppings in.
1143 rcu_read_lock();
1144 QSIMPLEQ_FOREACH_SAFE(mspr, &ms->src_page_requests, next_req, next_mspr) {
1145 memory_region_unref(mspr->rb->mr);
1146 QSIMPLEQ_REMOVE_HEAD(&ms->src_page_requests, next_req);
1147 g_free(mspr);
1149 rcu_read_unlock();
1153 * Queue the pages for transmission, e.g. a request from postcopy destination
1154 * ms: MigrationStatus in which the queue is held
1155 * rbname: The RAMBlock the request is for - may be NULL (to mean reuse last)
1156 * start: Offset from the start of the RAMBlock
1157 * len: Length (in bytes) to send
1158 * Return: 0 on success
1160 int ram_save_queue_pages(MigrationState *ms, const char *rbname,
1161 ram_addr_t start, ram_addr_t len)
1163 RAMBlock *ramblock;
1165 rcu_read_lock();
1166 if (!rbname) {
1167 /* Reuse last RAMBlock */
1168 ramblock = ms->last_req_rb;
1170 if (!ramblock) {
1172 * Shouldn't happen, we can't reuse the last RAMBlock if
1173 * it's the 1st request.
1175 error_report("ram_save_queue_pages no previous block");
1176 goto err;
1178 } else {
1179 ramblock = qemu_ram_block_by_name(rbname);
1181 if (!ramblock) {
1182 /* We shouldn't be asked for a non-existent RAMBlock */
1183 error_report("ram_save_queue_pages no block '%s'", rbname);
1184 goto err;
1186 ms->last_req_rb = ramblock;
1188 trace_ram_save_queue_pages(ramblock->idstr, start, len);
1189 if (start+len > ramblock->used_length) {
1190 error_report("%s request overrun start=" RAM_ADDR_FMT " len="
1191 RAM_ADDR_FMT " blocklen=" RAM_ADDR_FMT,
1192 __func__, start, len, ramblock->used_length);
1193 goto err;
1196 struct MigrationSrcPageRequest *new_entry =
1197 g_malloc0(sizeof(struct MigrationSrcPageRequest));
1198 new_entry->rb = ramblock;
1199 new_entry->offset = start;
1200 new_entry->len = len;
1202 memory_region_ref(ramblock->mr);
1203 qemu_mutex_lock(&ms->src_page_req_mutex);
1204 QSIMPLEQ_INSERT_TAIL(&ms->src_page_requests, new_entry, next_req);
1205 qemu_mutex_unlock(&ms->src_page_req_mutex);
1206 rcu_read_unlock();
1208 return 0;
1210 err:
1211 rcu_read_unlock();
1212 return -1;
1216 * ram_save_target_page: Save one target page
1219 * @f: QEMUFile where to send the data
1220 * @block: pointer to block that contains the page we want to send
1221 * @offset: offset inside the block for the page;
1222 * @last_stage: if we are at the completion stage
1223 * @bytes_transferred: increase it with the number of transferred bytes
1224 * @dirty_ram_abs: Address of the start of the dirty page in ram_addr_t space
1226 * Returns: Number of pages written.
1228 static int ram_save_target_page(MigrationState *ms, QEMUFile *f,
1229 RAMBlock *block, ram_addr_t offset,
1230 bool last_stage,
1231 uint64_t *bytes_transferred,
1232 ram_addr_t dirty_ram_abs)
1234 int res = 0;
1236 /* Check the pages is dirty and if it is send it */
1237 if (migration_bitmap_clear_dirty(dirty_ram_abs)) {
1238 unsigned long *unsentmap;
1239 if (compression_switch && migrate_use_compression()) {
1240 res = ram_save_compressed_page(f, block, offset,
1241 last_stage,
1242 bytes_transferred);
1243 } else {
1244 res = ram_save_page(f, block, offset, last_stage,
1245 bytes_transferred);
1248 if (res < 0) {
1249 return res;
1251 unsentmap = atomic_rcu_read(&migration_bitmap_rcu)->unsentmap;
1252 if (unsentmap) {
1253 clear_bit(dirty_ram_abs >> TARGET_PAGE_BITS, unsentmap);
1255 /* Only update last_sent_block if a block was actually sent; xbzrle
1256 * might have decided the page was identical so didn't bother writing
1257 * to the stream.
1259 if (res > 0) {
1260 last_sent_block = block;
1264 return res;
1268 * ram_save_host_page: Starting at *offset send pages upto the end
1269 * of the current host page. It's valid for the initial
1270 * offset to point into the middle of a host page
1271 * in which case the remainder of the hostpage is sent.
1272 * Only dirty target pages are sent.
1274 * Returns: Number of pages written.
1276 * @f: QEMUFile where to send the data
1277 * @block: pointer to block that contains the page we want to send
1278 * @offset: offset inside the block for the page; updated to last target page
1279 * sent
1280 * @last_stage: if we are at the completion stage
1281 * @bytes_transferred: increase it with the number of transferred bytes
1282 * @dirty_ram_abs: Address of the start of the dirty page in ram_addr_t space
1284 static int ram_save_host_page(MigrationState *ms, QEMUFile *f, RAMBlock *block,
1285 ram_addr_t *offset, bool last_stage,
1286 uint64_t *bytes_transferred,
1287 ram_addr_t dirty_ram_abs)
1289 int tmppages, pages = 0;
1290 do {
1291 tmppages = ram_save_target_page(ms, f, block, *offset, last_stage,
1292 bytes_transferred, dirty_ram_abs);
1293 if (tmppages < 0) {
1294 return tmppages;
1297 pages += tmppages;
1298 *offset += TARGET_PAGE_SIZE;
1299 dirty_ram_abs += TARGET_PAGE_SIZE;
1300 } while (*offset & (qemu_host_page_size - 1));
1302 /* The offset we leave with is the last one we looked at */
1303 *offset -= TARGET_PAGE_SIZE;
1304 return pages;
1308 * ram_find_and_save_block: Finds a dirty page and sends it to f
1310 * Called within an RCU critical section.
1312 * Returns: The number of pages written
1313 * 0 means no dirty pages
1315 * @f: QEMUFile where to send the data
1316 * @last_stage: if we are at the completion stage
1317 * @bytes_transferred: increase it with the number of transferred bytes
1319 * On systems where host-page-size > target-page-size it will send all the
1320 * pages in a host page that are dirty.
1323 static int ram_find_and_save_block(QEMUFile *f, bool last_stage,
1324 uint64_t *bytes_transferred)
1326 PageSearchStatus pss;
1327 MigrationState *ms = migrate_get_current();
1328 int pages = 0;
1329 bool again, found;
1330 ram_addr_t dirty_ram_abs; /* Address of the start of the dirty page in
1331 ram_addr_t space */
1333 pss.block = last_seen_block;
1334 pss.offset = last_offset;
1335 pss.complete_round = false;
1337 if (!pss.block) {
1338 pss.block = QLIST_FIRST_RCU(&ram_list.blocks);
1341 do {
1342 again = true;
1343 found = get_queued_page(ms, &pss, &dirty_ram_abs);
1345 if (!found) {
1346 /* priority queue empty, so just search for something dirty */
1347 found = find_dirty_block(f, &pss, &again, &dirty_ram_abs);
1350 if (found) {
1351 pages = ram_save_host_page(ms, f, pss.block, &pss.offset,
1352 last_stage, bytes_transferred,
1353 dirty_ram_abs);
1355 } while (!pages && again);
1357 last_seen_block = pss.block;
1358 last_offset = pss.offset;
1360 return pages;
1363 void acct_update_position(QEMUFile *f, size_t size, bool zero)
1365 uint64_t pages = size / TARGET_PAGE_SIZE;
1366 if (zero) {
1367 acct_info.dup_pages += pages;
1368 } else {
1369 acct_info.norm_pages += pages;
1370 bytes_transferred += size;
1371 qemu_update_position(f, size);
1375 static ram_addr_t ram_save_remaining(void)
1377 return migration_dirty_pages;
1380 uint64_t ram_bytes_remaining(void)
1382 return ram_save_remaining() * TARGET_PAGE_SIZE;
1385 uint64_t ram_bytes_transferred(void)
1387 return bytes_transferred;
1390 uint64_t ram_bytes_total(void)
1392 RAMBlock *block;
1393 uint64_t total = 0;
1395 rcu_read_lock();
1396 QLIST_FOREACH_RCU(block, &ram_list.blocks, next)
1397 total += block->used_length;
1398 rcu_read_unlock();
1399 return total;
1402 void free_xbzrle_decoded_buf(void)
1404 g_free(xbzrle_decoded_buf);
1405 xbzrle_decoded_buf = NULL;
1408 static void migration_bitmap_free(struct BitmapRcu *bmap)
1410 g_free(bmap->bmap);
1411 g_free(bmap->unsentmap);
1412 g_free(bmap);
1415 static void ram_migration_cleanup(void *opaque)
1417 /* caller have hold iothread lock or is in a bh, so there is
1418 * no writing race against this migration_bitmap
1420 struct BitmapRcu *bitmap = migration_bitmap_rcu;
1421 atomic_rcu_set(&migration_bitmap_rcu, NULL);
1422 if (bitmap) {
1423 memory_global_dirty_log_stop();
1424 call_rcu(bitmap, migration_bitmap_free, rcu);
1427 XBZRLE_cache_lock();
1428 if (XBZRLE.cache) {
1429 cache_fini(XBZRLE.cache);
1430 g_free(XBZRLE.encoded_buf);
1431 g_free(XBZRLE.current_buf);
1432 XBZRLE.cache = NULL;
1433 XBZRLE.encoded_buf = NULL;
1434 XBZRLE.current_buf = NULL;
1436 XBZRLE_cache_unlock();
1439 static void reset_ram_globals(void)
1441 last_seen_block = NULL;
1442 last_sent_block = NULL;
1443 last_offset = 0;
1444 last_version = ram_list.version;
1445 ram_bulk_stage = true;
1448 #define MAX_WAIT 50 /* ms, half buffered_file limit */
1450 void migration_bitmap_extend(ram_addr_t old, ram_addr_t new)
1452 /* called in qemu main thread, so there is
1453 * no writing race against this migration_bitmap
1455 if (migration_bitmap_rcu) {
1456 struct BitmapRcu *old_bitmap = migration_bitmap_rcu, *bitmap;
1457 bitmap = g_new(struct BitmapRcu, 1);
1458 bitmap->bmap = bitmap_new(new);
1460 /* prevent migration_bitmap content from being set bit
1461 * by migration_bitmap_sync_range() at the same time.
1462 * it is safe to migration if migration_bitmap is cleared bit
1463 * at the same time.
1465 qemu_mutex_lock(&migration_bitmap_mutex);
1466 bitmap_copy(bitmap->bmap, old_bitmap->bmap, old);
1467 bitmap_set(bitmap->bmap, old, new - old);
1469 /* We don't have a way to safely extend the sentmap
1470 * with RCU; so mark it as missing, entry to postcopy
1471 * will fail.
1473 bitmap->unsentmap = NULL;
1475 atomic_rcu_set(&migration_bitmap_rcu, bitmap);
1476 qemu_mutex_unlock(&migration_bitmap_mutex);
1477 migration_dirty_pages += new - old;
1478 call_rcu(old_bitmap, migration_bitmap_free, rcu);
1483 * 'expected' is the value you expect the bitmap mostly to be full
1484 * of; it won't bother printing lines that are all this value.
1485 * If 'todump' is null the migration bitmap is dumped.
1487 void ram_debug_dump_bitmap(unsigned long *todump, bool expected)
1489 int64_t ram_pages = last_ram_offset() >> TARGET_PAGE_BITS;
1491 int64_t cur;
1492 int64_t linelen = 128;
1493 char linebuf[129];
1495 if (!todump) {
1496 todump = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
1499 for (cur = 0; cur < ram_pages; cur += linelen) {
1500 int64_t curb;
1501 bool found = false;
1503 * Last line; catch the case where the line length
1504 * is longer than remaining ram
1506 if (cur + linelen > ram_pages) {
1507 linelen = ram_pages - cur;
1509 for (curb = 0; curb < linelen; curb++) {
1510 bool thisbit = test_bit(cur + curb, todump);
1511 linebuf[curb] = thisbit ? '1' : '.';
1512 found = found || (thisbit != expected);
1514 if (found) {
1515 linebuf[curb] = '\0';
1516 fprintf(stderr, "0x%08" PRIx64 " : %s\n", cur, linebuf);
1521 /* **** functions for postcopy ***** */
1524 * Callback from postcopy_each_ram_send_discard for each RAMBlock
1525 * Note: At this point the 'unsentmap' is the processed bitmap combined
1526 * with the dirtymap; so a '1' means it's either dirty or unsent.
1527 * start,length: Indexes into the bitmap for the first bit
1528 * representing the named block and length in target-pages
1530 static int postcopy_send_discard_bm_ram(MigrationState *ms,
1531 PostcopyDiscardState *pds,
1532 unsigned long start,
1533 unsigned long length)
1535 unsigned long end = start + length; /* one after the end */
1536 unsigned long current;
1537 unsigned long *unsentmap;
1539 unsentmap = atomic_rcu_read(&migration_bitmap_rcu)->unsentmap;
1540 for (current = start; current < end; ) {
1541 unsigned long one = find_next_bit(unsentmap, end, current);
1543 if (one <= end) {
1544 unsigned long zero = find_next_zero_bit(unsentmap, end, one + 1);
1545 unsigned long discard_length;
1547 if (zero >= end) {
1548 discard_length = end - one;
1549 } else {
1550 discard_length = zero - one;
1552 postcopy_discard_send_range(ms, pds, one, discard_length);
1553 current = one + discard_length;
1554 } else {
1555 current = one;
1559 return 0;
1563 * Utility for the outgoing postcopy code.
1564 * Calls postcopy_send_discard_bm_ram for each RAMBlock
1565 * passing it bitmap indexes and name.
1566 * Returns: 0 on success
1567 * (qemu_ram_foreach_block ends up passing unscaled lengths
1568 * which would mean postcopy code would have to deal with target page)
1570 static int postcopy_each_ram_send_discard(MigrationState *ms)
1572 struct RAMBlock *block;
1573 int ret;
1575 QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
1576 unsigned long first = block->offset >> TARGET_PAGE_BITS;
1577 PostcopyDiscardState *pds = postcopy_discard_send_init(ms,
1578 first,
1579 block->idstr);
1582 * Postcopy sends chunks of bitmap over the wire, but it
1583 * just needs indexes at this point, avoids it having
1584 * target page specific code.
1586 ret = postcopy_send_discard_bm_ram(ms, pds, first,
1587 block->used_length >> TARGET_PAGE_BITS);
1588 postcopy_discard_send_finish(ms, pds);
1589 if (ret) {
1590 return ret;
1594 return 0;
1598 * Helper for postcopy_chunk_hostpages; it's called twice to cleanup
1599 * the two bitmaps, that are similar, but one is inverted.
1601 * We search for runs of target-pages that don't start or end on a
1602 * host page boundary;
1603 * unsent_pass=true: Cleans up partially unsent host pages by searching
1604 * the unsentmap
1605 * unsent_pass=false: Cleans up partially dirty host pages by searching
1606 * the main migration bitmap
1609 static void postcopy_chunk_hostpages_pass(MigrationState *ms, bool unsent_pass,
1610 RAMBlock *block,
1611 PostcopyDiscardState *pds)
1613 unsigned long *bitmap;
1614 unsigned long *unsentmap;
1615 unsigned int host_ratio = qemu_host_page_size / TARGET_PAGE_SIZE;
1616 unsigned long first = block->offset >> TARGET_PAGE_BITS;
1617 unsigned long len = block->used_length >> TARGET_PAGE_BITS;
1618 unsigned long last = first + (len - 1);
1619 unsigned long run_start;
1621 bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
1622 unsentmap = atomic_rcu_read(&migration_bitmap_rcu)->unsentmap;
1624 if (unsent_pass) {
1625 /* Find a sent page */
1626 run_start = find_next_zero_bit(unsentmap, last + 1, first);
1627 } else {
1628 /* Find a dirty page */
1629 run_start = find_next_bit(bitmap, last + 1, first);
1632 while (run_start <= last) {
1633 bool do_fixup = false;
1634 unsigned long fixup_start_addr;
1635 unsigned long host_offset;
1638 * If the start of this run of pages is in the middle of a host
1639 * page, then we need to fixup this host page.
1641 host_offset = run_start % host_ratio;
1642 if (host_offset) {
1643 do_fixup = true;
1644 run_start -= host_offset;
1645 fixup_start_addr = run_start;
1646 /* For the next pass */
1647 run_start = run_start + host_ratio;
1648 } else {
1649 /* Find the end of this run */
1650 unsigned long run_end;
1651 if (unsent_pass) {
1652 run_end = find_next_bit(unsentmap, last + 1, run_start + 1);
1653 } else {
1654 run_end = find_next_zero_bit(bitmap, last + 1, run_start + 1);
1657 * If the end isn't at the start of a host page, then the
1658 * run doesn't finish at the end of a host page
1659 * and we need to discard.
1661 host_offset = run_end % host_ratio;
1662 if (host_offset) {
1663 do_fixup = true;
1664 fixup_start_addr = run_end - host_offset;
1666 * This host page has gone, the next loop iteration starts
1667 * from after the fixup
1669 run_start = fixup_start_addr + host_ratio;
1670 } else {
1672 * No discards on this iteration, next loop starts from
1673 * next sent/dirty page
1675 run_start = run_end + 1;
1679 if (do_fixup) {
1680 unsigned long page;
1682 /* Tell the destination to discard this page */
1683 if (unsent_pass || !test_bit(fixup_start_addr, unsentmap)) {
1684 /* For the unsent_pass we:
1685 * discard partially sent pages
1686 * For the !unsent_pass (dirty) we:
1687 * discard partially dirty pages that were sent
1688 * (any partially sent pages were already discarded
1689 * by the previous unsent_pass)
1691 postcopy_discard_send_range(ms, pds, fixup_start_addr,
1692 host_ratio);
1695 /* Clean up the bitmap */
1696 for (page = fixup_start_addr;
1697 page < fixup_start_addr + host_ratio; page++) {
1698 /* All pages in this host page are now not sent */
1699 set_bit(page, unsentmap);
1702 * Remark them as dirty, updating the count for any pages
1703 * that weren't previously dirty.
1705 migration_dirty_pages += !test_and_set_bit(page, bitmap);
1709 if (unsent_pass) {
1710 /* Find the next sent page for the next iteration */
1711 run_start = find_next_zero_bit(unsentmap, last + 1,
1712 run_start);
1713 } else {
1714 /* Find the next dirty page for the next iteration */
1715 run_start = find_next_bit(bitmap, last + 1, run_start);
1721 * Utility for the outgoing postcopy code.
1723 * Discard any partially sent host-page size chunks, mark any partially
1724 * dirty host-page size chunks as all dirty.
1726 * Returns: 0 on success
1728 static int postcopy_chunk_hostpages(MigrationState *ms)
1730 struct RAMBlock *block;
1732 if (qemu_host_page_size == TARGET_PAGE_SIZE) {
1733 /* Easy case - TPS==HPS - nothing to be done */
1734 return 0;
1737 /* Easiest way to make sure we don't resume in the middle of a host-page */
1738 last_seen_block = NULL;
1739 last_sent_block = NULL;
1740 last_offset = 0;
1742 QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
1743 unsigned long first = block->offset >> TARGET_PAGE_BITS;
1745 PostcopyDiscardState *pds =
1746 postcopy_discard_send_init(ms, first, block->idstr);
1748 /* First pass: Discard all partially sent host pages */
1749 postcopy_chunk_hostpages_pass(ms, true, block, pds);
1751 * Second pass: Ensure that all partially dirty host pages are made
1752 * fully dirty.
1754 postcopy_chunk_hostpages_pass(ms, false, block, pds);
1756 postcopy_discard_send_finish(ms, pds);
1757 } /* ram_list loop */
1759 return 0;
1763 * Transmit the set of pages to be discarded after precopy to the target
1764 * these are pages that:
1765 * a) Have been previously transmitted but are now dirty again
1766 * b) Pages that have never been transmitted, this ensures that
1767 * any pages on the destination that have been mapped by background
1768 * tasks get discarded (transparent huge pages is the specific concern)
1769 * Hopefully this is pretty sparse
1771 int ram_postcopy_send_discard_bitmap(MigrationState *ms)
1773 int ret;
1774 unsigned long *bitmap, *unsentmap;
1776 rcu_read_lock();
1778 /* This should be our last sync, the src is now paused */
1779 migration_bitmap_sync();
1781 unsentmap = atomic_rcu_read(&migration_bitmap_rcu)->unsentmap;
1782 if (!unsentmap) {
1783 /* We don't have a safe way to resize the sentmap, so
1784 * if the bitmap was resized it will be NULL at this
1785 * point.
1787 error_report("migration ram resized during precopy phase");
1788 rcu_read_unlock();
1789 return -EINVAL;
1792 /* Deal with TPS != HPS */
1793 ret = postcopy_chunk_hostpages(ms);
1794 if (ret) {
1795 rcu_read_unlock();
1796 return ret;
1800 * Update the unsentmap to be unsentmap = unsentmap | dirty
1802 bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
1803 bitmap_or(unsentmap, unsentmap, bitmap,
1804 last_ram_offset() >> TARGET_PAGE_BITS);
1807 trace_ram_postcopy_send_discard_bitmap();
1808 #ifdef DEBUG_POSTCOPY
1809 ram_debug_dump_bitmap(unsentmap, true);
1810 #endif
1812 ret = postcopy_each_ram_send_discard(ms);
1813 rcu_read_unlock();
1815 return ret;
1819 * At the start of the postcopy phase of migration, any now-dirty
1820 * precopied pages are discarded.
1822 * start, length describe a byte address range within the RAMBlock
1824 * Returns 0 on success.
1826 int ram_discard_range(MigrationIncomingState *mis,
1827 const char *block_name,
1828 uint64_t start, size_t length)
1830 int ret = -1;
1832 rcu_read_lock();
1833 RAMBlock *rb = qemu_ram_block_by_name(block_name);
1835 if (!rb) {
1836 error_report("ram_discard_range: Failed to find block '%s'",
1837 block_name);
1838 goto err;
1841 uint8_t *host_startaddr = rb->host + start;
1843 if ((uintptr_t)host_startaddr & (qemu_host_page_size - 1)) {
1844 error_report("ram_discard_range: Unaligned start address: %p",
1845 host_startaddr);
1846 goto err;
1849 if ((start + length) <= rb->used_length) {
1850 uint8_t *host_endaddr = host_startaddr + length;
1851 if ((uintptr_t)host_endaddr & (qemu_host_page_size - 1)) {
1852 error_report("ram_discard_range: Unaligned end address: %p",
1853 host_endaddr);
1854 goto err;
1856 ret = postcopy_ram_discard_range(mis, host_startaddr, length);
1857 } else {
1858 error_report("ram_discard_range: Overrun block '%s' (%" PRIu64
1859 "/%zx/" RAM_ADDR_FMT")",
1860 block_name, start, length, rb->used_length);
1863 err:
1864 rcu_read_unlock();
1866 return ret;
1870 /* Each of ram_save_setup, ram_save_iterate and ram_save_complete has
1871 * long-running RCU critical section. When rcu-reclaims in the code
1872 * start to become numerous it will be necessary to reduce the
1873 * granularity of these critical sections.
1876 static int ram_save_setup(QEMUFile *f, void *opaque)
1878 RAMBlock *block;
1879 int64_t ram_bitmap_pages; /* Size of bitmap in pages, including gaps */
1881 dirty_rate_high_cnt = 0;
1882 bitmap_sync_count = 0;
1883 migration_bitmap_sync_init();
1884 qemu_mutex_init(&migration_bitmap_mutex);
1886 if (migrate_use_xbzrle()) {
1887 XBZRLE_cache_lock();
1888 XBZRLE.cache = cache_init(migrate_xbzrle_cache_size() /
1889 TARGET_PAGE_SIZE,
1890 TARGET_PAGE_SIZE);
1891 if (!XBZRLE.cache) {
1892 XBZRLE_cache_unlock();
1893 error_report("Error creating cache");
1894 return -1;
1896 XBZRLE_cache_unlock();
1898 /* We prefer not to abort if there is no memory */
1899 XBZRLE.encoded_buf = g_try_malloc0(TARGET_PAGE_SIZE);
1900 if (!XBZRLE.encoded_buf) {
1901 error_report("Error allocating encoded_buf");
1902 return -1;
1905 XBZRLE.current_buf = g_try_malloc(TARGET_PAGE_SIZE);
1906 if (!XBZRLE.current_buf) {
1907 error_report("Error allocating current_buf");
1908 g_free(XBZRLE.encoded_buf);
1909 XBZRLE.encoded_buf = NULL;
1910 return -1;
1913 acct_clear();
1916 /* iothread lock needed for ram_list.dirty_memory[] */
1917 qemu_mutex_lock_iothread();
1918 qemu_mutex_lock_ramlist();
1919 rcu_read_lock();
1920 bytes_transferred = 0;
1921 reset_ram_globals();
1923 ram_bitmap_pages = last_ram_offset() >> TARGET_PAGE_BITS;
1924 migration_bitmap_rcu = g_new0(struct BitmapRcu, 1);
1925 migration_bitmap_rcu->bmap = bitmap_new(ram_bitmap_pages);
1926 bitmap_set(migration_bitmap_rcu->bmap, 0, ram_bitmap_pages);
1928 if (migrate_postcopy_ram()) {
1929 migration_bitmap_rcu->unsentmap = bitmap_new(ram_bitmap_pages);
1930 bitmap_set(migration_bitmap_rcu->unsentmap, 0, ram_bitmap_pages);
1934 * Count the total number of pages used by ram blocks not including any
1935 * gaps due to alignment or unplugs.
1937 migration_dirty_pages = ram_bytes_total() >> TARGET_PAGE_BITS;
1939 memory_global_dirty_log_start();
1940 migration_bitmap_sync();
1941 qemu_mutex_unlock_ramlist();
1942 qemu_mutex_unlock_iothread();
1944 qemu_put_be64(f, ram_bytes_total() | RAM_SAVE_FLAG_MEM_SIZE);
1946 QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
1947 qemu_put_byte(f, strlen(block->idstr));
1948 qemu_put_buffer(f, (uint8_t *)block->idstr, strlen(block->idstr));
1949 qemu_put_be64(f, block->used_length);
1952 rcu_read_unlock();
1954 ram_control_before_iterate(f, RAM_CONTROL_SETUP);
1955 ram_control_after_iterate(f, RAM_CONTROL_SETUP);
1957 qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
1959 return 0;
1962 static int ram_save_iterate(QEMUFile *f, void *opaque)
1964 int ret;
1965 int i;
1966 int64_t t0;
1967 int pages_sent = 0;
1969 rcu_read_lock();
1970 if (ram_list.version != last_version) {
1971 reset_ram_globals();
1974 /* Read version before ram_list.blocks */
1975 smp_rmb();
1977 ram_control_before_iterate(f, RAM_CONTROL_ROUND);
1979 t0 = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
1980 i = 0;
1981 while ((ret = qemu_file_rate_limit(f)) == 0) {
1982 int pages;
1984 pages = ram_find_and_save_block(f, false, &bytes_transferred);
1985 /* no more pages to sent */
1986 if (pages == 0) {
1987 break;
1989 pages_sent += pages;
1990 acct_info.iterations++;
1992 /* we want to check in the 1st loop, just in case it was the 1st time
1993 and we had to sync the dirty bitmap.
1994 qemu_get_clock_ns() is a bit expensive, so we only check each some
1995 iterations
1997 if ((i & 63) == 0) {
1998 uint64_t t1 = (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - t0) / 1000000;
1999 if (t1 > MAX_WAIT) {
2000 DPRINTF("big wait: %" PRIu64 " milliseconds, %d iterations\n",
2001 t1, i);
2002 break;
2005 i++;
2007 flush_compressed_data(f);
2008 rcu_read_unlock();
2011 * Must occur before EOS (or any QEMUFile operation)
2012 * because of RDMA protocol.
2014 ram_control_after_iterate(f, RAM_CONTROL_ROUND);
2016 qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
2017 bytes_transferred += 8;
2019 ret = qemu_file_get_error(f);
2020 if (ret < 0) {
2021 return ret;
2024 return pages_sent;
2027 /* Called with iothread lock */
2028 static int ram_save_complete(QEMUFile *f, void *opaque)
2030 rcu_read_lock();
2032 if (!migration_in_postcopy(migrate_get_current())) {
2033 migration_bitmap_sync();
2036 ram_control_before_iterate(f, RAM_CONTROL_FINISH);
2038 /* try transferring iterative blocks of memory */
2040 /* flush all remaining blocks regardless of rate limiting */
2041 while (true) {
2042 int pages;
2044 pages = ram_find_and_save_block(f, true, &bytes_transferred);
2045 /* no more blocks to sent */
2046 if (pages == 0) {
2047 break;
2051 flush_compressed_data(f);
2052 ram_control_after_iterate(f, RAM_CONTROL_FINISH);
2054 rcu_read_unlock();
2056 qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
2058 return 0;
2061 static void ram_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
2062 uint64_t *non_postcopiable_pending,
2063 uint64_t *postcopiable_pending)
2065 uint64_t remaining_size;
2067 remaining_size = ram_save_remaining() * TARGET_PAGE_SIZE;
2069 if (!migration_in_postcopy(migrate_get_current()) &&
2070 remaining_size < max_size) {
2071 qemu_mutex_lock_iothread();
2072 rcu_read_lock();
2073 migration_bitmap_sync();
2074 rcu_read_unlock();
2075 qemu_mutex_unlock_iothread();
2076 remaining_size = ram_save_remaining() * TARGET_PAGE_SIZE;
2079 /* We can do postcopy, and all the data is postcopiable */
2080 *postcopiable_pending += remaining_size;
2083 static int load_xbzrle(QEMUFile *f, ram_addr_t addr, void *host)
2085 unsigned int xh_len;
2086 int xh_flags;
2088 if (!xbzrle_decoded_buf) {
2089 xbzrle_decoded_buf = g_malloc(TARGET_PAGE_SIZE);
2092 /* extract RLE header */
2093 xh_flags = qemu_get_byte(f);
2094 xh_len = qemu_get_be16(f);
2096 if (xh_flags != ENCODING_FLAG_XBZRLE) {
2097 error_report("Failed to load XBZRLE page - wrong compression!");
2098 return -1;
2101 if (xh_len > TARGET_PAGE_SIZE) {
2102 error_report("Failed to load XBZRLE page - len overflow!");
2103 return -1;
2105 /* load data and decode */
2106 qemu_get_buffer(f, xbzrle_decoded_buf, xh_len);
2108 /* decode RLE */
2109 if (xbzrle_decode_buffer(xbzrle_decoded_buf, xh_len, host,
2110 TARGET_PAGE_SIZE) == -1) {
2111 error_report("Failed to load XBZRLE page - decode error!");
2112 return -1;
2115 return 0;
2118 /* Must be called from within a rcu critical section.
2119 * Returns a pointer from within the RCU-protected ram_list.
2122 * Read a RAMBlock ID from the stream f, find the host address of the
2123 * start of that block and add on 'offset'
2125 * f: Stream to read from
2126 * offset: Offset within the block
2127 * flags: Page flags (mostly to see if it's a continuation of previous block)
2129 static inline void *host_from_stream_offset(QEMUFile *f,
2130 ram_addr_t offset,
2131 int flags)
2133 static RAMBlock *block = NULL;
2134 char id[256];
2135 uint8_t len;
2137 if (flags & RAM_SAVE_FLAG_CONTINUE) {
2138 if (!block || block->max_length <= offset) {
2139 error_report("Ack, bad migration stream!");
2140 return NULL;
2143 return block->host + offset;
2146 len = qemu_get_byte(f);
2147 qemu_get_buffer(f, (uint8_t *)id, len);
2148 id[len] = 0;
2150 block = qemu_ram_block_by_name(id);
2151 if (block && block->max_length > offset) {
2152 return block->host + offset;
2155 error_report("Can't find block %s", id);
2156 return NULL;
2160 * If a page (or a whole RDMA chunk) has been
2161 * determined to be zero, then zap it.
2163 void ram_handle_compressed(void *host, uint8_t ch, uint64_t size)
2165 if (ch != 0 || !is_zero_range(host, size)) {
2166 memset(host, ch, size);
2170 static void *do_data_decompress(void *opaque)
2172 DecompressParam *param = opaque;
2173 unsigned long pagesize;
2175 while (!quit_decomp_thread) {
2176 qemu_mutex_lock(&param->mutex);
2177 while (!param->start && !quit_decomp_thread) {
2178 qemu_cond_wait(&param->cond, &param->mutex);
2179 pagesize = TARGET_PAGE_SIZE;
2180 if (!quit_decomp_thread) {
2181 /* uncompress() will return failed in some case, especially
2182 * when the page is dirted when doing the compression, it's
2183 * not a problem because the dirty page will be retransferred
2184 * and uncompress() won't break the data in other pages.
2186 uncompress((Bytef *)param->des, &pagesize,
2187 (const Bytef *)param->compbuf, param->len);
2189 param->start = false;
2191 qemu_mutex_unlock(&param->mutex);
2194 return NULL;
2197 void migrate_decompress_threads_create(void)
2199 int i, thread_count;
2201 thread_count = migrate_decompress_threads();
2202 decompress_threads = g_new0(QemuThread, thread_count);
2203 decomp_param = g_new0(DecompressParam, thread_count);
2204 compressed_data_buf = g_malloc0(compressBound(TARGET_PAGE_SIZE));
2205 quit_decomp_thread = false;
2206 for (i = 0; i < thread_count; i++) {
2207 qemu_mutex_init(&decomp_param[i].mutex);
2208 qemu_cond_init(&decomp_param[i].cond);
2209 decomp_param[i].compbuf = g_malloc0(compressBound(TARGET_PAGE_SIZE));
2210 qemu_thread_create(decompress_threads + i, "decompress",
2211 do_data_decompress, decomp_param + i,
2212 QEMU_THREAD_JOINABLE);
2216 void migrate_decompress_threads_join(void)
2218 int i, thread_count;
2220 quit_decomp_thread = true;
2221 thread_count = migrate_decompress_threads();
2222 for (i = 0; i < thread_count; i++) {
2223 qemu_mutex_lock(&decomp_param[i].mutex);
2224 qemu_cond_signal(&decomp_param[i].cond);
2225 qemu_mutex_unlock(&decomp_param[i].mutex);
2227 for (i = 0; i < thread_count; i++) {
2228 qemu_thread_join(decompress_threads + i);
2229 qemu_mutex_destroy(&decomp_param[i].mutex);
2230 qemu_cond_destroy(&decomp_param[i].cond);
2231 g_free(decomp_param[i].compbuf);
2233 g_free(decompress_threads);
2234 g_free(decomp_param);
2235 g_free(compressed_data_buf);
2236 decompress_threads = NULL;
2237 decomp_param = NULL;
2238 compressed_data_buf = NULL;
2241 static void decompress_data_with_multi_threads(uint8_t *compbuf,
2242 void *host, int len)
2244 int idx, thread_count;
2246 thread_count = migrate_decompress_threads();
2247 while (true) {
2248 for (idx = 0; idx < thread_count; idx++) {
2249 if (!decomp_param[idx].start) {
2250 memcpy(decomp_param[idx].compbuf, compbuf, len);
2251 decomp_param[idx].des = host;
2252 decomp_param[idx].len = len;
2253 start_decompression(&decomp_param[idx]);
2254 break;
2257 if (idx < thread_count) {
2258 break;
2264 * Allocate data structures etc needed by incoming migration with postcopy-ram
2265 * postcopy-ram's similarly names postcopy_ram_incoming_init does the work
2267 int ram_postcopy_incoming_init(MigrationIncomingState *mis)
2269 size_t ram_pages = last_ram_offset() >> TARGET_PAGE_BITS;
2271 return postcopy_ram_incoming_init(mis, ram_pages);
2275 * Called in postcopy mode by ram_load().
2276 * rcu_read_lock is taken prior to this being called.
2278 static int ram_load_postcopy(QEMUFile *f)
2280 int flags = 0, ret = 0;
2281 bool place_needed = false;
2282 bool matching_page_sizes = qemu_host_page_size == TARGET_PAGE_SIZE;
2283 MigrationIncomingState *mis = migration_incoming_get_current();
2284 /* Temporary page that is later 'placed' */
2285 void *postcopy_host_page = postcopy_get_tmp_page(mis);
2286 void *last_host = NULL;
2287 bool all_zero = false;
2289 while (!ret && !(flags & RAM_SAVE_FLAG_EOS)) {
2290 ram_addr_t addr;
2291 void *host = NULL;
2292 void *page_buffer = NULL;
2293 void *place_source = NULL;
2294 uint8_t ch;
2296 addr = qemu_get_be64(f);
2297 flags = addr & ~TARGET_PAGE_MASK;
2298 addr &= TARGET_PAGE_MASK;
2300 trace_ram_load_postcopy_loop((uint64_t)addr, flags);
2301 place_needed = false;
2302 if (flags & (RAM_SAVE_FLAG_COMPRESS | RAM_SAVE_FLAG_PAGE)) {
2303 host = host_from_stream_offset(f, addr, flags);
2304 if (!host) {
2305 error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
2306 ret = -EINVAL;
2307 break;
2309 page_buffer = host;
2311 * Postcopy requires that we place whole host pages atomically.
2312 * To make it atomic, the data is read into a temporary page
2313 * that's moved into place later.
2314 * The migration protocol uses, possibly smaller, target-pages
2315 * however the source ensures it always sends all the components
2316 * of a host page in order.
2318 page_buffer = postcopy_host_page +
2319 ((uintptr_t)host & ~qemu_host_page_mask);
2320 /* If all TP are zero then we can optimise the place */
2321 if (!((uintptr_t)host & ~qemu_host_page_mask)) {
2322 all_zero = true;
2323 } else {
2324 /* not the 1st TP within the HP */
2325 if (host != (last_host + TARGET_PAGE_SIZE)) {
2326 error_report("Non-sequential target page %p/%p\n",
2327 host, last_host);
2328 ret = -EINVAL;
2329 break;
2335 * If it's the last part of a host page then we place the host
2336 * page
2338 place_needed = (((uintptr_t)host + TARGET_PAGE_SIZE) &
2339 ~qemu_host_page_mask) == 0;
2340 place_source = postcopy_host_page;
2342 last_host = host;
2344 switch (flags & ~RAM_SAVE_FLAG_CONTINUE) {
2345 case RAM_SAVE_FLAG_COMPRESS:
2346 ch = qemu_get_byte(f);
2347 memset(page_buffer, ch, TARGET_PAGE_SIZE);
2348 if (ch) {
2349 all_zero = false;
2351 break;
2353 case RAM_SAVE_FLAG_PAGE:
2354 all_zero = false;
2355 if (!place_needed || !matching_page_sizes) {
2356 qemu_get_buffer(f, page_buffer, TARGET_PAGE_SIZE);
2357 } else {
2358 /* Avoids the qemu_file copy during postcopy, which is
2359 * going to do a copy later; can only do it when we
2360 * do this read in one go (matching page sizes)
2362 qemu_get_buffer_in_place(f, (uint8_t **)&place_source,
2363 TARGET_PAGE_SIZE);
2365 break;
2366 case RAM_SAVE_FLAG_EOS:
2367 /* normal exit */
2368 break;
2369 default:
2370 error_report("Unknown combination of migration flags: %#x"
2371 " (postcopy mode)", flags);
2372 ret = -EINVAL;
2375 if (place_needed) {
2376 /* This gets called at the last target page in the host page */
2377 if (all_zero) {
2378 ret = postcopy_place_page_zero(mis,
2379 host + TARGET_PAGE_SIZE -
2380 qemu_host_page_size);
2381 } else {
2382 ret = postcopy_place_page(mis, host + TARGET_PAGE_SIZE -
2383 qemu_host_page_size,
2384 place_source);
2387 if (!ret) {
2388 ret = qemu_file_get_error(f);
2392 return ret;
2395 static int ram_load(QEMUFile *f, void *opaque, int version_id)
2397 int flags = 0, ret = 0;
2398 static uint64_t seq_iter;
2399 int len = 0;
2401 * If system is running in postcopy mode, page inserts to host memory must
2402 * be atomic
2404 bool postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING;
2406 seq_iter++;
2408 if (version_id != 4) {
2409 ret = -EINVAL;
2412 /* This RCU critical section can be very long running.
2413 * When RCU reclaims in the code start to become numerous,
2414 * it will be necessary to reduce the granularity of this
2415 * critical section.
2417 rcu_read_lock();
2419 if (postcopy_running) {
2420 ret = ram_load_postcopy(f);
2423 while (!postcopy_running && !ret && !(flags & RAM_SAVE_FLAG_EOS)) {
2424 ram_addr_t addr, total_ram_bytes;
2425 void *host = NULL;
2426 uint8_t ch;
2428 addr = qemu_get_be64(f);
2429 flags = addr & ~TARGET_PAGE_MASK;
2430 addr &= TARGET_PAGE_MASK;
2432 if (flags & (RAM_SAVE_FLAG_COMPRESS | RAM_SAVE_FLAG_PAGE |
2433 RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE)) {
2434 host = host_from_stream_offset(f, addr, flags);
2435 if (!host) {
2436 error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
2437 ret = -EINVAL;
2438 break;
2442 switch (flags & ~RAM_SAVE_FLAG_CONTINUE) {
2443 case RAM_SAVE_FLAG_MEM_SIZE:
2444 /* Synchronize RAM block list */
2445 total_ram_bytes = addr;
2446 while (!ret && total_ram_bytes) {
2447 RAMBlock *block;
2448 char id[256];
2449 ram_addr_t length;
2451 len = qemu_get_byte(f);
2452 qemu_get_buffer(f, (uint8_t *)id, len);
2453 id[len] = 0;
2454 length = qemu_get_be64(f);
2456 block = qemu_ram_block_by_name(id);
2457 if (block) {
2458 if (length != block->used_length) {
2459 Error *local_err = NULL;
2461 ret = qemu_ram_resize(block->offset, length,
2462 &local_err);
2463 if (local_err) {
2464 error_report_err(local_err);
2467 ram_control_load_hook(f, RAM_CONTROL_BLOCK_REG,
2468 block->idstr);
2469 } else {
2470 error_report("Unknown ramblock \"%s\", cannot "
2471 "accept migration", id);
2472 ret = -EINVAL;
2475 total_ram_bytes -= length;
2477 break;
2479 case RAM_SAVE_FLAG_COMPRESS:
2480 ch = qemu_get_byte(f);
2481 ram_handle_compressed(host, ch, TARGET_PAGE_SIZE);
2482 break;
2484 case RAM_SAVE_FLAG_PAGE:
2485 qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
2486 break;
2488 case RAM_SAVE_FLAG_COMPRESS_PAGE:
2489 len = qemu_get_be32(f);
2490 if (len < 0 || len > compressBound(TARGET_PAGE_SIZE)) {
2491 error_report("Invalid compressed data length: %d", len);
2492 ret = -EINVAL;
2493 break;
2495 qemu_get_buffer(f, compressed_data_buf, len);
2496 decompress_data_with_multi_threads(compressed_data_buf, host, len);
2497 break;
2499 case RAM_SAVE_FLAG_XBZRLE:
2500 if (load_xbzrle(f, addr, host) < 0) {
2501 error_report("Failed to decompress XBZRLE page at "
2502 RAM_ADDR_FMT, addr);
2503 ret = -EINVAL;
2504 break;
2506 break;
2507 case RAM_SAVE_FLAG_EOS:
2508 /* normal exit */
2509 break;
2510 default:
2511 if (flags & RAM_SAVE_FLAG_HOOK) {
2512 ram_control_load_hook(f, RAM_CONTROL_HOOK, NULL);
2513 } else {
2514 error_report("Unknown combination of migration flags: %#x",
2515 flags);
2516 ret = -EINVAL;
2519 if (!ret) {
2520 ret = qemu_file_get_error(f);
2524 rcu_read_unlock();
2525 DPRINTF("Completed load of VM with exit code %d seq iteration "
2526 "%" PRIu64 "\n", ret, seq_iter);
2527 return ret;
2530 static SaveVMHandlers savevm_ram_handlers = {
2531 .save_live_setup = ram_save_setup,
2532 .save_live_iterate = ram_save_iterate,
2533 .save_live_complete_postcopy = ram_save_complete,
2534 .save_live_complete_precopy = ram_save_complete,
2535 .save_live_pending = ram_save_pending,
2536 .load_state = ram_load,
2537 .cleanup = ram_migration_cleanup,
2540 void ram_mig_init(void)
2542 qemu_mutex_init(&XBZRLE.lock);
2543 register_savevm_live(NULL, "ram", 0, 4, &savevm_ram_handlers, NULL);